Undefined
(source)
Table of Contents
This proposal introduces XCQ (Cross Consensus Query), which aims to serve as an intermediary layer between different chain runtime implementations and tools/UIs, to provide a unified interface for cross-chain queries. +XCQ abstracts away concrete implementations across chains and supports custom query computations.
XCQ
Use cases benefiting from XCQ include:
In Substrate, runtime APIs facilitate off-chain clients in reading the state of the consensus system. +However, different chains may expose different APIs for a similar query or have varying data types, such as doing custom transformations on direct data, or differing AccountId types. +This diversity also extends to client-side, which may require custom computations over runtime APIs in various use cases. +Therefore, tools and UI developers often access storage directly and reimplement custom computations to convert data into user-friendly representations, leading to duplicated code between Rust runtime logic and UI JS/TS logic. +This duplication increases workload and potential for bugs.
AccountId
Therefore, A system is needed to serve as an intermediary layer between concrete chain runtime implementations and tools/UIs, to provide a unified interface for cross-chain queries.
The overall query pattern of the XCQ consists of three components:
The runtime API for off-chain query usage includes two methods:
execute_query
metadata
Example XCQ Runtime API:
#![allow(unused)] +fn main() { +decl_runtime_apis! { + pub trait XcqApi { + fn execute_query(query: Vec<u8>, input: Vec<u8>, weight_limit: u64) -> XcqResult; + fn metadata() -> Vec<u8>; + } +} +type XcqResult = Result<XcqResponse, XcqError>; +type XcqResponse = Vec<u8>; +enum XcqError { + Custom(String), +} +}
Example metadata:
#![allow(unused)] +fn main() { +Metadata { + extensions: vec![ + ExtensionMetadata { + name: "ExtensionCore", + methods: vec![MethodMetadata { + name: "has_extension", + inputs: vec![MethodParamMetadata { + name: "id", + ty: XcqType::Primitive(PrimitiveType::U64) + }], + output: XcqType::Primitive(PrimitiveType::Bool) + }] + }, + ExtensionMetadata { + name: "ExtensionFungibles", + methods: vec![ + MethodMetadata { + name: "total_supply", + inputs: vec![MethodParamMetadata { + name: "asset", + ty: XcqType::Primitive(PrimitiveType::U32) + }], + output: XcqType::Primitive(PrimitiveType::U64) + }, + MethodMetadata { + name: "balance", + inputs: vec![ + MethodParamMetadata { + name: "asset", + ty: XcqType::Primitive(PrimitiveType::U32) + }, + MethodParamMetadata { + name: "who", + ty: XcqType::Primitive(PrimitiveType::H256) + } + ], + output: XcqType::Primitive(PrimitiveType::U64) + } + ] + } + ] +} +}
Note: ty is represented by a meta-type system called xcq-types
ty
xcq-types
xcq-types is a meta-type system similar to scale-info but simpler. +It enables different chains with different type definitions to work via a common operation. +Front-end codes constructs call data to XCQ programs according to metadata provided by different chains.
scale-info
An XCQ executor is a runtime module that executes XCQ queries. +It has a core method execute that takes a PolkaVM program binary, +method name of the exported functions in the PolkaVM program, input arguments, and weight limit that the PolkaVM program can consume.
execute
#![allow(unused)] +fn main() { +pub fn execute( + &mut self, + raw_blob: &[u8], + method: &str, + input: &[u8], + weight_limit: u64, +) -> Result<Vec<u8>, XcqExecutorError> {...} +}
An extension-based design is essential for several reasons:
Essential components of an XCQ extension system include:
A hash-based extension id generation mechanism for addressing and versioning . The hash value derives from the extension name and its method sets. Any update to an extension is treated as a new extension.
decl_extension macro: Defines an extension as a Rust trait with optional associated types.
decl_extension
Example usage:
#![allow(unused)] +fn main() { +use xcq_extension::decl_extension; + +pub trait Config { + type AssetId: Codec; + type AccountId: Codec; + type Balance: Codec; +} +decl_extension! { + pub trait ExtensionFungibles { + type Config: Config; + fn total_supply(asset: <Self::Config as Config>::AssetId) -> <Self::Config as Config>::Balance; + fn balance(asset: <Self::Config as Config>::AssetId, who: <Self::Config as Config>::AccountId) -> <Self::Config as Config>::Balance; + } +} +}
impl_extensions
Example Usage:
#![allow(unused)] +fn main() { +// ExtensionImpl is an aggregate struct to impl different extensions +struct ExtensionImpl; +impl extension_fungibles::Config for ExtensionImpl { + type AssetId = u32; + type AccountId = [u8; 32]; + type Balance = u64; +} +impl_extensions! { + impl extension_core::ExtensionCore for ExtensionImpl { + type Config = ExtensionImpl; + fn has_extension(id: <Self::Config as extension_core::Config>::ExtensionId) -> bool { + matches!(id, 0 | 1) + } + } + + impl extension_fungibles::ExtensionFungibles for ExtensionImpl { + type Config = ExtensionImpl; + #[allow(unused_variables)] + fn total_supply(asset: <Self::Config as extension_fungibles::Config>::AssetId) -> <Self::Config as extension_fungibles::Config>::Balance { + 200 + } + #[allow(unused_variables)] + fn balance(asset: <Self::Config as extension_fungibles::Config>::AssetId, who: <Self::Config as extension_fungibles::Config>::AccountId) -> <Self::Config as extension_fungibles::Config>::Balance { + 100 + } + } +} +}
ExtensionExecutor
xcq-executor
host_call
#![allow(unused)] +fn main() { +linker + .define_typed( + "host_call", + move |caller: Caller<'_, Self::UserData>, + extension_id: u64, + call_ptr: u32, + call_len: u32| + -> Result<u64, ExtensionError> { + ... + }); +}
PermController
#![allow(unused)] +fn main() { +pub trait PermController { + fn is_allowed(extension_id: ExtensionIdTy, call: &[u8], source: InvokeSource) -> bool; +} +#[derive(Copy, Clone)] +pub enum InvokeSource { + RuntimeAPI, + XCM, + Extrinsic, + Runtime, +} +}
An XCQ program is structured as a PolkaVM program with the following key components:
Imported Functions:
host_call: Dispatches call requests to the XCQ Extension Executor.
#![allow(unused)] +fn main() { +#[polkavm_derive::polkavm_import] +extern "C" { + fn host_call(extension_id: u64, call_ptr: u32, call_len: u32) -> u64; +} +}
Results are SCALE-encoded bytes, with the pointer address (lower 32 bits) and length (higher 32 bits) packed into a u64.
return_ty: Returns the type of the function call result.
return_ty
#![allow(unused)] +fn main() { +#[polkavm_derive::polkavm_import] +extern "C" { + fn return_ty(extension_id: u64, call_index: u32) -> u64; +} +}
Results are SCALE-encoded bytes, with the pointer address and length packed similarly to host_call.
Exported Functions:
main
The interaction between an XCQ program and the XCQ Extension Executor follows these steps:
Program Loading: The Executor loads the PolkaVM program binary.
Environment Setup: The Executor configures the PolkaVM environment, registering host functions like host_call and return_ty.
Main Function Execution: The Executor calls the program's main function, passing serialized query arguments.
Program Execution:
Result Retrieval: The Executor reads the result from shared memory and returns it to the caller.
Testing:
Security:
It's a new functionality, which doesn't modify the existing implementations.
The proposal facilitate the wallets and dApps developers. Developers no longer need to examine every concrete implementation to support conceptually similar operations across different chains. Additionally, they gain a more modular development experience through encapsulating custom computations over the exposed APIs in PolkaVM programs.
The proposal defines new apis, which doesn't break compatibility with existing interfaces.
There are several discussions related to the proposal, including:
view functions
view function
Since XCQ are supported both in off-chain and on-chain, a related XCM-Format RFC should be proposed.
This book contains the Polkadot Fellowship Requests for Comments (RFCs) detailing proposed changes to the technical implementation of the Polkadot network.
polkadot-fellows/RFCs
This RFC proposes the definition of version 5 extrinsics along with changes to the specification and encoding from version 4.
RFC84 introduced the specification of General transactions, a new type of extrinsic besides the Signed and Unsigned variants available previously in version 4. Additionally, RFC99 introduced versioning of transaction extensions through an extra byte in the extrinsic encoding. Both of these changes require an extrinsic format version bump as both the semantics around extensions as well as the actual encoding of extrinsics need to change to accommodate these new features.
General
Signed
Unsigned
The introduction of General transactions allows the authorization of any and all origins through -extensions. This means that, with the appropriate extension, General transactions are capable of -replicating the same behavior present day v4 Signed transactions. Specifically for Polkadot -chains, an example implementation for such an extension is -VerifySignature, -introduced in the Transaction Extension -PR3685. Other extensions can be inserted -into the extension pipeline to authorize different custom origins. Therefore, a Signed extrinsic -variant is redundant to a General one strictly in terms of functionality available to users and -would eventually need to be deprecated and removed.
VerifySignature
As with version 4, the encoded v5 extrinsics will still be an array of SCALE encoded bytes, starting -with the encoded length of the following bytes. The leading byte will determine the version and type -of extrinsic, as specified by -RFC84, -with the addition that the Signed variant will not be supported for v5 extrinsics, for reasons -mentioned above.
NOTE: For Bare extrinsics, the following bytes will just be the encoded call and nothing else.
Bare
For General transactions, as stated in -RFC99, -an extension version byte must be added in the next extrinsic version. This byte should allow -runtimes to expose more than one set of extensions which can be used for a transaction. As far as -the v5 extrinsic encoding is concerned, this extension byte should be encoded immediately after the -leading encoding byte. The extension version byte should be included in payloads to be signed by all -extensions configured by runtime devs to ensure a user's extension version choice cannot be altered -by third parties.
After the extension version byte, the extensions will be encoded next, followed by the call itself.
A quick visualization of the encoding:
(extrinsic_encoded_len, 0b0000_0101, call)
(extrinsic_encoded_len, , 0b0100_0101, extension_version_byte, extension, call)
As stated before, PR3685 comes with a -Transaction Extension which replicates the current Signed transactions in v5 extrinsics, namely -VerifySignature. -This extension leverages the new inherited implication functionality introduced in -TransactionExtension and creates a payload to be signed using the data of all extensions after -itself in the extension pipeline. In order to run a transaction with a signed origin, a user must -create the transaction with an instance of the extension which provides a signature. Alternatively, -if users want to use some other origin, they should create the transaction with this particular -extension disabled. More on this behavior in the extension documentation. This extension can be -configured to accept a MultiSignature, which makes it compatible with all signature types -currently used in Polkadot.
TransactionExtension
MultiSignature
To generate the payload to be signed:
BLAKE2_256
#![allow(unused)] -fn main() { -// Step 1: encode the bytes -let encoded = (extension_version_byte, call, transaction_extension, transaction_extension_implicit).encode(); -// Step 2: hash them -let payload = blake2_256(&encoded[..]); -// Step 3: sign the payload -let signature = keyring.sign(&payload[..]); -}
In order to minimize the number of changes to the extrinsic format version and also to help all -consumers downstream in the transition period between these extrinsic versions, we should:
The metadata will have to accommodate two distinct extrinsic format versions at a given point in -time in order to provide the new functionality in a non-breaking way for users and tooling.
There is no impact on testing, security or privacy.
This change makes the authorization through signatures configurable by runtime devs in version 5 -extrinsics, as opposed to version 4 where the signing payload algorithm and signatures were -hardcoded. This moves the responsibility of ensuring proper authentication through -TransactionExtension to the runtime devs, but a sensible default which closely resembles the -present day behavior will be provided in VerifySignature.
There is no performance impact.
Tooling will have to adapt to be able to tell which authorization scheme is used by a particular -transaction by decoding the extension and checking which particular TransactionExtension in the pipeline is enabled to do the origin authorization. Previously, this was done by simply checking whether the transaction is signed or unsigned, as there was only one method of authentication.
As long as extrinsic version 4 is still exposed in the metadata when version 5 will be introduced, -the changes will not break existing infrastructure. This should give enough time for tooling to -support version 5 and to remove version 4 in the future.
This is a result of the work in Extrinsic -Horizon and -RFC99.
There is no clear way to expose two different extrinsic versions in the current metadata framework. -A non-exhaustive list of options discussed so far:
ExtrinsicMetadata
Following this change, extrinsic version 5 will be introduced as part of the Extrinsic -Horizon effort, which will shape future -work.
This RFC proposes a metadata format for XCM-identifiable assets (i.e., for fungible/non-fungible collections and non-fungible tokens) and a set of instructions to communicate it across chains.
Currently, there is no way to communicate metadata of an asset (or an asset instance) via XCM.
The ability to query and modify the metadata is useful for two kinds of entities:
Besides metadata modification, the ability to read it is also valuable. On-chain logic can interpret the NFT metadata, i.e., the metadata could have not only the media meaning but also a utility function within a consensus system. Currently, such a way of using NFT metadata is possible only within one consensus system. This RFC proposes making it possible between different systems via XCM so different chains can fetch and analyze the asset metadata from other chains.
Runtime users, Runtime devs, Cross-chain dApps, Wallets.
The Asset Metadata is information bound to an asset class (fungible or NFT collection) or an asset instance (an NFT). The Asset Metadata could be represented differently on different chains (or in other consensus entities). However, to communicate metadata between consensus entities via XCM, we need a general format so that any consensus entity can make sense of such information.
AssetId
Asset { id: <AssetId>, fun: Undefined }
As a singleton non-fungible instance is barely distinguishable from its collection, this convention shouldn't cause any problems.
Thus, the AssetInstance docs must be updated accordingly in the implementations.
AssetInstance
Regarding ergonomics, no drawbacks were noticed.
As for the user experience, it could discover new cross-chain use cases involving asset collections and NFTs, indicating a positive impact.
There are no security concerns except for the ReportMetadata instruction, which implies that the source of the information must be trusted.
ReportMetadata
In terms of performance and privacy, there will be no changes.
The implementations must honor the contract for the new instructions. Namely, if the instance field has the value of AssetInstance::Undefined, the metadata must relate to the asset collection but not to a non-fungible token inside it.
instance
AssetInstance::Undefined
No significant impact.
Introducing a standard metadata format and a way of communicating it is a valuable addition to the XCM format that potentially increases cross-chain interoperability without the need to form ad-hoc chain-to-chain integrations via Transact.
Transact
This RFC proposes new functionality, so there are no compatibility issues.
RFC: XCM Asset Metadata
Should the MetadataMap and MetadataKeys be bounded, or is it enough to rely on the fact that every XCM message is itself bounded?
MetadataMap
MetadataKeys
The original RFC draft contained additional metadata instructions. Though they could be useful, they're clearly outside the basic logic. So, this RFC version omits them to make the metadata discussion more focused on the core things. Nonetheless, there is hope that metadata approval instructions might be useful in the future, so they are mentioned here.
You can read about the details in the original draft.
move
V1
:code
:pending_code
The introduction of General transactions allows the authorization of any and all origins through +extensions. This means that, with the appropriate extension, General transactions are capable of +replicating the same behavior present day v4 Signed transactions. Specifically for Polkadot +chains, an example implementation for such an extension is +VerifySignature, +introduced in the Transaction Extension +PR3685. Other extensions can be inserted +into the extension pipeline to authorize different custom origins. Therefore, a Signed extrinsic +variant is redundant to a General one strictly in terms of functionality available to users and +would eventually need to be deprecated and removed.
As with version 4, the encoded v5 extrinsics will still be an array of SCALE encoded bytes, starting +with the encoded length of the following bytes. The leading byte will determine the version and type +of extrinsic, as specified by +RFC84, +with the addition that the Signed variant will not be supported for v5 extrinsics, for reasons +mentioned above.
For General transactions, as stated in +RFC99, +an extension version byte must be added in the next extrinsic version. This byte should allow +runtimes to expose more than one set of extensions which can be used for a transaction. As far as +the v5 extrinsic encoding is concerned, this extension byte should be encoded immediately after the +leading encoding byte. The extension version byte should be included in payloads to be signed by all +extensions configured by runtime devs to ensure a user's extension version choice cannot be altered +by third parties.
As stated before, PR3685 comes with a +Transaction Extension which replicates the current Signed transactions in v5 extrinsics, namely +VerifySignature. +This extension leverages the new inherited implication functionality introduced in +TransactionExtension and creates a payload to be signed using the data of all extensions after +itself in the extension pipeline. In order to run a transaction with a signed origin, a user must +create the transaction with an instance of the extension which provides a signature. Alternatively, +if users want to use some other origin, they should create the transaction with this particular +extension disabled. More on this behavior in the extension documentation. This extension can be +configured to accept a MultiSignature, which makes it compatible with all signature types +currently used in Polkadot.
#![allow(unused)] +fn main() { +// Step 1: encode the bytes +let encoded = (extension_version_byte, call, transaction_extension, transaction_extension_implicit).encode(); +// Step 2: hash them +let payload = blake2_256(&encoded[..]); +// Step 3: sign the payload +let signature = keyring.sign(&payload[..]); +}
In order to minimize the number of changes to the extrinsic format version and also to help all +consumers downstream in the transition period between these extrinsic versions, we should:
The metadata will have to accommodate two distinct extrinsic format versions at a given point in +time in order to provide the new functionality in a non-breaking way for users and tooling.
This change makes the authorization through signatures configurable by runtime devs in version 5 +extrinsics, as opposed to version 4 where the signing payload algorithm and signatures were +hardcoded. This moves the responsibility of ensuring proper authentication through +TransactionExtension to the runtime devs, but a sensible default which closely resembles the +present day behavior will be provided in VerifySignature.
Tooling will have to adapt to be able to tell which authorization scheme is used by a particular +transaction by decoding the extension and checking which particular TransactionExtension in the pipeline is enabled to do the origin authorization. Previously, this was done by simply checking whether the transaction is signed or unsigned, as there was only one method of authentication.
As long as extrinsic version 4 is still exposed in the metadata when version 5 will be introduced, +the changes will not break existing infrastructure. This should give enough time for tooling to +support version 5 and to remove version 4 in the future.
This is a result of the work in Extrinsic +Horizon and +RFC99.
There is no clear way to expose two different extrinsic versions in the current metadata framework. +A non-exhaustive list of options discussed so far:
Following this change, extrinsic version 5 will be introduced as part of the Extrinsic +Horizon effort, which will shape future +work.
This RFC proposes to change the duration of the Confirmation Period for the Big Tipper and Small Tipper tracks in Polkadot OpenGov:
Big Tipper: 1 Hour -> 1 Day
Currently, these are the durations of treasury tracks in Polkadot OpenGov. Confirmation periods for the Spender tracks were adjusted based on RFC20 and its related conversation.
You can see that there is a general trend on the Spender track that when the privilege level (the amount the track can spend) the confirmation period approximately doubles.
I believe that the Big Tipper and Small Tipper track's confirmation periods should be adjusted to match this trend.
In the current state it is possible to somewhat positively snipe these tracks, and whilst the power/privilege level of these tracks is very low (they cannot spend a large amount of funds), I believe we should increase the confirmation periods to something higher. This is backed up by the recent sentiment in the greater community regarding referendums submitted on these tracks. The parameters of Polkadot OpenGov can be adjusted based on the general sentiment of token holders when necessary.
The primary stakeholders of this RFC are: – DOT token holders – as this affects the protocol's treasury – Entities wishing to submit a referendum on these tracks – as this affects the referendum's timeline – Projects with governance app integrations – see Performance, Ergonomics and Compatibility section below
This RFC proposes to change the duration of the confirmation period for both the Big Tipper and Small Tipper tracks. To achieve this the confirm_period parameter for those tracks should be changed.
confirm_period
You can see the lines of code that need to be adjusted here:
This RFC proposes to change the confirm_period for the Big Tipper track to DAYS (i.e. 1 Day) and the confirm_period for the Small Tipper track to 12 * HOURS (i.e. 12 Hours).
DAYS
12 * HOURS
The drawback of changing these confirmation periods is that the lifecycle of referenda submitted on those tracks would be ultimately longer, and it would add a greater potential to negatively "snipe" referenda on those tracks by knocking the referendum out of its confirmation period once the decision period has ended. This can be a good or a bad thing depending on your outlook of positive vs negative sniping.
This referendum will enhance the security of the protocol as it relates to its treasury. The confirmation period is one of the last lines of defense for the Polkadot token holder DAO to react to a potentially bad referendum and vote NAY in order for its confirmation period to be aborted.
This is a simple change (code wise) that should not affect the performance of the Polkadot protocol, outside of increasing the duration of the confirmation periods for these 2 tracks.
As per the implementation of changes described in RFC-20, it was identified that governance UIs automatically update to meet the new parameters:
N/A
Some token holders may want these confirmation periods to remain as they are currently and for them not to increase. If this is something that the Polkadot Technical Fellowship considers to be an issue to implement into a runtime upgrade then I can create a Wish For Change to obtain token holder approval.
The parameters of Polkadot OpenGov will likely continue to change over time, there are additional discussions in the community regarding adjusting the min_support for some tracks so that it does not trend towards 0%, similar to the current state of the Whitelisted Caller track. This is outside of the scope of this RFC and requires a lot more discussion.
min_support
This proposes a periodic, sale-based method for assigning Polkadot Coretime, the analogue of "block space" within the Polkadot Network. The method takes into account the need for long-term capital expenditure planning for teams building on Polkadot, yet also provides a means to allow Polkadot to capture long-term value in the resource which it sells. It supports the possibility of building rich and dynamic secondary markets to optimize resource allocation and largely avoids the need for parameterization.
The Polkadot Ubiquitous Computer, or just Polkadot UC, represents the public service provided by the Polkadot Network. It is a trust-free, WebAssembly-based, multicore, internet-native omnipresent virtual machine which is highly resilient to interference and corruption.
The present system of allocating the limited resources of the Polkadot Ubiquitous Computer is through a process known as parachain slot auctions. This is a parachain-centric paradigm whereby a single core is long-term allocated to a single parachain which itself implies a Substrate/Cumulus-based chain secured and connected via the Relay-chain. Slot auctions are on-chain candle auctions which proceed for several days and result in the core being assigned to the parachain for six months at a time up to 24 months in advance. Practically speaking, we only see two year periods being bid upon and leased.
Furthermore, the design SHOULD be implementable and deployable in a timely fashion; three months from the acceptance of this RFC should not be unreasonable.
Primary stakeholder sets are:
Socialization:
The essensials of this proposal were presented at Polkadot Decoded 2023 Copenhagen on the Main Stage. A small amount of socialization at the Parachain Summit preceeded it and some substantial discussion followed it. Parity Ecosystem team is currently soliciting views from ecosystem teams who would be key stakeholders.
Upon implementation of this proposal, the parachain-centric slot auctions and associated crowdloans cease. Instead, Coretime on the Polkadot UC is sold by the Polkadot System in two separate formats: Bulk Coretime and Instantaneous Coretime.
When a Polkadot Core is utilized, we say it is dedicated to a Task rather than a "parachain". The Task to which a Core is dedicated may change at every Relay-chain block and while one predominant type of Task is to secure a Cumulus-based blockchain (i.e. a parachain), other types of Tasks are envisioned.
No specific considerations.
Parachains already deployed into the Polkadot UC must have a clear plan of action to migrate to an agile Coretime market.
While this proposal does not introduce documentable features per se, adequate documentation must be provided to potential purchasers of Polkadot Coretime. This SHOULD include any alterations to the Polkadot-SDK software collection.
Regular testing through unit tests, integration tests, manual testnet tests, zombie-net tests and fuzzing SHOULD be conducted.
A regular security review SHOULD be conducted prior to deployment through a review by the Web3 Foundation economic research group.
Any final implementation MUST pass a professional external security audit.
The proposal introduces no new privacy concerns.
RFC-3 proposes a means of implementing the high-level allocations within the Relay-chain.
RFC-5 proposes the API for interacting with Relay-chain.
Additional work should specify the interface for the instantaneous market revenue so that the Coretime-chain can ensure Bulk Coretime placed in the instantaneous market is properly compensated.
Robert Habermeier initially wrote on the subject of Polkadot blockspace-centric in the article Polkadot Blockspace over Blockchains. While not going into details, the article served as an early reframing piece for moving beyond one-slot-per-chain models and building out secondary market infrastructure for resource allocation.
In the Agile Coretime model of the Polkadot Ubiquitous Computer, as proposed in RFC-1 and RFC-3, it is necessary for the allocating parachain (envisioned to be one or more pallets on a specialised Brokerage System Chain) to communicate the core assignments to the Relay-chain, which is responsible for ensuring those assignments are properly enacted.
This is a proposal for the interface which will exist around the Relay-chain in order to communicate this information and instructions.
The background motivation for this interface is splitting out coretime allocation functions and secondary markets from the Relay-chain onto System parachains. A well-understood and general interface is necessary for ensuring the Relay-chain receives coretime allocation instructions from one or more System chains without introducing dependencies on the implementation details of either side.
This content of this RFC was discussed in the Polkdot Fellows channel.
The interface has two sections: The messages which the Relay-chain is able to receive from the allocating parachain (the UMP message types), and messages which the Relay-chain is able to send to the allocating parachain (the DMP message types). These messages are expected to be able to be implemented in a well-known pallet and called with the XCM Transact instruction.
Future work may include these messages being introduced into the XCM standard.
For request_revenue_info, a successful request should be possible if when is no less than the Relay-chain block number on arrival of the message less 100,000.
request_revenue_info
when
For assign_core, a successful request should be possible if begin is no less than the Relay-chain block number on arrival of the message plus 10 and workload contains no more than 100 items.
assign_core
begin
workload
Standard Polkadot testing and security auditing applies.
RFC-1 proposes a means of determining allocation of Coretime using this interface.
None at present.
None.
As core functionality moves from the Relay Chain into system chains, so increases the reliance on the liveness of these chains for the use of the network. It is not economically scalable, nor necessary from a game-theoretic perspective, to pay collators large rewards. This RFC proposes a mechanism -- part technical and part social -- for ensuring reliable collator sets that are resilient to attemps to stop any subsytem of the Polkadot protocol.
In order to guarantee access to Polkadot's system, the collators on its system chains must propose blocks (provide liveness) and allow all transactions to eventually be included. That is, some collators may censor transactions, but there must exist one collator in the set who will include a @@ -2472,12 +2885,12 @@ to censor any subset of transactions.
This protocol builds on the existing Collator Selection pallet and its notion of Invulnerables. Invulnerables are collators (identified by their AccountIds) who @@ -2513,27 +2926,27 @@ approximately:
The primary drawback is a reliance on governance for continued treasury funding of infrastructure costs for Invulnerable collators.
The vast majority of cases can be covered by unit testing. Integration test should ensure that the Collator Selection UpdateOrigin, which has permission to modify the Invulnerables and desired number of Candidates, can handle updates over XCM from the system's governance location.
UpdateOrigin
This proposal has very little impact on most users of Polkadot, and should improve the performance of system chains by reducing the number of missed blocks.
As chains have strict PoV size limits, care must be taken in the PoV impact of the session manager. Appropriate benchmarking and tests should ensure that conservative limits are placed on the number of Invulnerables and Candidates.
The primary group affected is Candidate collators, who, after implementation of this RFC, will need to compete in a bond-based election rather than a race to claim a Candidate spot.
This RFC is compatible with the existing implementation and can be handled via upgrades and migration.
None at this time.
There may exist in the future system chains for which this model of collator selection is not appropriate. These chains should be evaluated on a case-by-case basis.
The full nodes of the Polkadot peer-to-peer network maintain a distributed hash table (DHT), which is currently used for full nodes discovery and validators discovery purposes.
This RFC proposes to extend this DHT to be used to discover full nodes of the parachains of Polkadot.
The maintenance of bootnodes has long been an annoyance for everyone.
When a bootnode is newly-deployed or removed, every chain specification must be updated in order to take the update into account. This has lead to various non-optimal solutions, such as pulling chain specifications from GitHub repositories. When it comes to RPC nodes, UX developers often have trouble finding up-to-date addresses of parachain RPC nodes. With the ongoing migration from RPC nodes to light clients, similar problems would happen with chain specifications as well.
Because the list of bootnodes in chain specifications is so annoying to modify, the consequence is that the number of bootnodes is rather low (typically between 2 and 15). In order to better resist downtimes and DoS attacks, a better solution would be to use every node of a certain chain as potential bootnode, rather than special-casing some specific nodes.
While this RFC doesn't solve these problems for relay chains, it aims at solving it for parachains by storing the list of all the full nodes of a parachain on the relay chain DHT.
Assuming that this RFC is implemented, and that light clients are used, deploying a parachain wouldn't require more work than registering it onto the relay chain and starting the collators. There wouldn't be any need for special infrastructure nodes anymore.
This RFC has been opened on my own initiative because I think that this is a good technical solution to a usability problem that many people are encountering and that they don't realize can be solved.
The content of this RFC only applies for parachains and parachain nodes that are "Substrate-compatible". It is in no way mandatory for parachains to comply to this RFC.
Note that "Substrate-compatible" is very loosely defined as "implements the same mechanisms and networking protocols as Substrate". The author of this RFC believes that "Substrate-compatible" should be very precisely specified, but there is controversy on this topic.
While a lot of this RFC concerns the implementation of parachain nodes, it makes use of the resources of the Polkadot chain, and as such it is important to describe them in the Polkadot specification.
The maximum size of a response is set to an arbitrary 16kiB. The responding side should make sure to conform to this limit. Given that fork_id is typically very small and that the only variable-length field is addrs, this is easily achieved by limiting the number of addresses.
fork_id
addrs
Implementers should be aware that addrs might be very large, and are encouraged to limit the number of addrs to an implementation-defined value.
The peer_id and addrs fields are in theory not strictly needed, as the PeerId and addresses could be always equal to the PeerId and addresses of the node being registered as the provider and serving the response. However, the Cumulus implementation currently uses two different networking stacks, one of the parachain and one for the relay chain, using two separate PeerIds and addresses, and as such the PeerId and addresses of the other networking stack must be indicated. Asking them to use only one networking stack wouldn't feasible in a realistic time frame.
peer_id
The values of the genesis_hash and fork_id fields cannot be verified by the requester and are expected to be unused at the moment. Instead, a client that desires connecting to a parachain is expected to obtain the genesis hash and fork ID of the parachain from the parachain chain specification. These fields are included in the networking protocol nonetheless in case an acceptable solution is found in the future, and in order to allow use cases such as discovering parachains in a not-strictly-trusted way.
genesis_hash
Because not all nodes want to be used as bootnodes, implementers are encouraged to provide a way to disable this mechanism. However, it is very much encouraged to leave this mechanism on by default for all parachain nodes.
This mechanism doesn't add or remove any security by itself, as it relies on existing mechanisms. However, if the principle of chain specification bootnodes is entirely replaced with the mechanism described in this RFC (which is the objective), then it becomes important whether the mechanism in this RFC can be abused in order to make a parachain unreachable.
For this reason, an attacker can abuse this mechanism by randomly generating libp2p PeerIds until they find the 20 entries closest to the key representing the target parachain. They are then in control of the parachain bootnodes. Because the key changes periodically and isn't predictable, and assuming that the Polkadot DHT is sufficiently large, it is not realistic for an attack like this to be maintained in the long term.
key
Furthermore, parachain clients are expected to cache a list of known good nodes on their disk. If the mechanism described in this RFC went down, it would only prevent new nodes from accessing the parachain, while clients that have connected before would not be affected.
The DHT mechanism generally has a low overhead, especially given that publishing providers is done only every 24 hours.
Doing a Kademlia iterative query then sending a provider record shouldn't take more than around 50 kiB in total of bandwidth for the parachain bootnode.
Assuming 1000 parachain full nodes, the 20 Polkadot full nodes corresponding to a specific parachain will each receive a sudden spike of a few megabytes of networking traffic when the key rotates. Again, this is relatively negligible. If this becomes a problem, one can add a random delay before a parachain full node registers itself to be the provider of the key corresponding to BabeApi_next_epoch.
BabeApi_next_epoch
Maybe the biggest uncertainty is the traffic that the 20 Polkadot full nodes will receive from light clients that desire knowing the bootnodes of a parachain. Light clients are generally encouraged to cache the peers that they use between restarts, so they should only query these 20 Polkadot full nodes at their first initialization. If this every becomes a problem, this value of 20 is an arbitrary constant that can be increased for more redundancy.
Irrelevant.
While it fundamentally doesn't change much to this RFC, using BabeApi_currentEpoch and BabeApi_nextEpoch might be inappropriate. I'm not familiar enough with good practices within the runtime to have an opinion here. Should it be an entirely new pallet?
BabeApi_currentEpoch
BabeApi_nextEpoch
It is possible that in the future a client could connect to a parachain without having to rely on a trusted parachain specification.
The Polkadot UC will generate revenue from the sale of available Coretime. The question then arises: how should we handle these revenues? Broadly, there are two reasonable paths – burning the revenue and thereby removing it from total issuance or divert it to the Treasury. This Request for Comment (RFC) presents arguments favoring burning as the preferred mechanism for handling revenues from Coretime sales.
How to handle the revenue accrued from Coretime sales is an important economic question that influences the value of DOT and should be properly discussed before deciding for either of the options. Now is the best time to start this discussion.
Polkadot DOT token holders.
This RFC discusses potential benefits of burning the revenue accrued from Coretime sales instead of diverting them to Treasury. Here are the following arguments for it.
It's in the interest of the Polkadot community to have a consistent and predictable Treasury income, because volatility in the inflow can be damaging, especially in situations when it is insufficient. As such, this RFC operates under the presumption of a steady and sustainable Treasury income flow, which is crucial for the Polkadot community's stability. The assurance of a predictable Treasury income, as outlined in a prior discussion here, or through other equally effective measures, serves as a baseline assumption for this argument.
Consequently, we need not concern ourselves with this particular issue here. This naturally begs the question - why should we introduce additional volatility to the Treasury by aligning it with the variable Coretime sales? It's worth noting that Coretime revenues often exhibit an inverse relationship with periods when Treasury spending should ideally be ramped up. During periods of low Coretime utilization (indicated by lower revenue), Treasury should spend more on projects and endeavours to increase the demand for Coretime. This pattern underscores that Coretime sales, by their very nature, are an inconsistent and unpredictable source of funding for the Treasury. Given the importance of maintaining a steady and predictable inflow, it's unnecessary to rely on another volatile mechanism. Some might argue that we could have both: a steady inflow (from inflation) and some added bonus from Coretime sales, but burning the revenue would offer further benefits as described below.
Since the introduction of the Collectives parachain, many groups have expressed interest in forming new -- or migrating existing groups into -- on-chain collectives. While adding a new collective is relatively simple from a technical standpoint, the Fellowship will need to merge new pallets into the Collectives parachain for each new collective. This RFC proposes a means for the network to ratify a new collective, thus instructing the Fellowship to instate it in the runtime.
Many groups have expressed interest in representing collectives on-chain. Some of these include:
The group that wishes to operate an on-chain collective should publish the following information:
Collective removal may also come with other governance calls, for example voiding any scheduled Treasury spends that would fund the given collective.
Passing a Root origin referendum is slow. However, given the network's investment (in terms of code maintenance and salaries) in a new collective, this is an appropriate step.
No impacts.
Generally all new collectives will be in the Collectives parachain. Thus, performance impacts should strictly be limited to this parachain and not affect others. As the majority of logic for collectives is generalized and reusable, we expect most collectives to be instances of similar subsets of modules. That is, new collectives should generally be compatible with UIs and other services that provide collective-related functionality, with little modifications to support new ones.
The launch of the Technical Fellowship, see the initial forum post.
Introduces breaking changes to the Core runtime API by letting Core::initialize_block return an enum. The versions of Core is bumped from 4 to 5.
Core
Core::initialize_block
The main feature that motivates this RFC are Multi-Block-Migrations (MBM); these make it possible to split a migration over multiple blocks. Further it would be nice to not hinder the possibility of implementing a new hook poll, that runs at the beginning of the block when there are no MBMs and has access to AllPalletsWithSystem. This hook can then be used to replace the use of on_initialize and on_finalize for non-deadline critical logic. In a similar fashion, it should not hinder the future addition of a System::PostInherents callback that always runs after all inherents were applied.
poll
AllPalletsWithSystem
on_initialize
on_finalize
System::PostInherents
This runtime API function is changed from returning () to ExtrinsicInclusionMode:
()
ExtrinsicInclusionMode
fn initialize_block(header: &<Block as BlockT>::Header) @@ -2885,23 +3298,23 @@ multi-block migrations available. 1. Multi-Block-Migrations: The runtime is being put into lock-down mode for the duration of the migration process by returning OnlyInherents from initialize_block. This ensures that no user provided transaction can interfere with the migration process. It is absolutely necessary to ensure this, otherwise a transaction could call into un-migrated storage and violate storage invariants. 2. poll is possible by using apply_extrinsic as entry-point and not hindered by this approach. It would not be possible to use a pallet inherent like System::last_inherent to achieve this for two reasons: First is that pallets do not have access to AllPalletsWithSystem which is required to invoke the poll hook on all pallets. Second is that the runtime does currently not enforce an order of inherents. 3. System::PostInherents can be done in the same manner as poll. -Drawbacks +Drawbacks The previous drawback of cementing the order of inherents has been addressed and removed by redesigning the approach. No further drawbacks have been identified thus far. -Testing, Security, and Privacy +Testing, Security, and Privacy The new logic of initialize_block can be tested by checking that the block-builder will skip transactions when OnlyInherents is returned. Security: n/a Privacy: n/a -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance The performance overhead is minimal in the sense that no clutter was added after fulfilling the requirements. The only performance difference is that initialize_block also returns an enum that needs to be passed through the WASM boundary. This should be negligible. -Ergonomics +Ergonomics The new interface allows for more extensible runtime logic. In the future, this will be utilized for multi-block-migrations which should be a huge ergonomic advantage for parachain developers. -Compatibility +Compatibility The advice here is OPTIONAL and outside of the RFC. To not degrade user experience, it is recommended to ensure that an updated node can still import historic blocks. -Prior Art and References +Prior Art and References The RFC is currently being implemented in polkadot-sdk#1781 (formerly substrate#14275). Related issues and merge requests: @@ -2911,14 +3324,14 @@ transactions There is no module hook after inherents and before transactions -Unresolved Questions +Unresolved Questions Please suggest a better name for BlockExecutiveMode. We already tried: RuntimeExecutiveMode, ExtrinsicInclusionMode. The names of the modes Normal and Minimal were also called AllExtrinsics and OnlyInherents, so if you have naming preferences; please post them. => renamed to ExtrinsicInclusionMode Is post_inherents more consistent instead of last_inherent? Then we should change it. => renamed to last_inherent -Future Directions and Related Material +Future Directions and Related Material The long-term future here is to move the block building logic into the runtime. Currently there is a tight dance between the block author and the runtime; the author has to call into different runtime functions in quick succession and exact order. Any misstep causes the block to be invalid. This can be unified and simplified by moving both parts into the runtime. (source) @@ -2955,14 +3368,14 @@ This can be unified and simplified by moving both parts into the runtime. AuthorsBryan Chen -Summary +Summary This RFC proposes a set of changes to the parachain lock mechanism. The goal is to allow a parachain manager to self-service the parachain without root track governance action. This is achieved by remove existing lock conditions and only lock a parachain when: A parachain manager explicitly lock the parachain OR a parachain block is produced successfully -Motivation +Motivation The manager of a parachain has permission to manage the parachain when the parachain is unlocked. Parachains are by default locked when onboarded to a slot. This requires the parachain wasm/genesis must be valid, otherwise a root track governance action on relaychain is required to update the parachain. The current reliance on root track governance actions for managing parachains can be time-consuming and burdensome. This RFC aims to address this technical difficulty by allowing parachain managers to take self-service actions, rather than relying on general public voting. The key scenarios this RFC seeks to improve are: @@ -2981,12 +3394,12 @@ This can be unified and simplified by moving both parts into the runtime. A parachain SHOULD be locked when it successfully produced the first block. A parachain manager MUST be able to perform lease swap without having a running parachain. -Stakeholders +Stakeholders Parachain teams Parachain users -Explanation +Explanation Status quo A parachain can either be locked or unlocked3. With parachain locked, the parachain manager does not have any privileges. With parachain unlocked, the parachain manager can perform following actions with the paras_registrar pallet: @@ -3026,31 +3439,31 @@ This can be unified and simplified by moving both parts into the runtime. Parachain never produced a block. Including from expired leases. Parachain manager never explicitly lock the parachain. -Drawbacks +Drawbacks Parachain locks are designed in such way to ensure the decentralization of parachains. If parachains are not locked when it should be, it could introduce centralization risk for new parachains. For example, one possible scenario is that a collective may decide to launch a parachain fully decentralized. However, if the parachain is unable to produce block, the parachain manager will be able to replace the wasm and genesis without the consent of the collective. It is considered this risk is tolerable as it requires the wasm/genesis to be invalid at first place. It is not yet practically possible to develop a parachain without any centralized risk currently. Another case is that a parachain team may decide to use crowdloan to help secure a slot lease. Previously, creating a crowdloan will lock a parachain. This means crowdloan participants will know exactly the genesis of the parachain for the crowdloan they are participating. However, this actually providers little assurance to crowdloan participants. For example, if the genesis block is determined before a crowdloan is started, it is not possible to have onchain mechanism to enforce reward distributions for crowdloan participants. They always have to rely on the parachain team to fulfill the promise after the parachain is alive. Existing operational parachains will not be impacted. -Testing, Security, and Privacy +Testing, Security, and Privacy The implementation of this RFC will be tested on testnets (Rococo and Westend) first. An audit maybe required to ensure the implementation does not introduce unwanted side effects. There is no privacy related concerns. -Performance +Performance This RFC should not introduce any performance impact. -Ergonomics +Ergonomics This RFC should improve the developer experiences for new and existing parachain teams -Compatibility +Compatibility This RFC is fully compatibility with existing interfaces. -Prior Art and References +Prior Art and References Parachain Slot Extension Story: https://github.com/paritytech/polkadot/issues/4758 Allow parachain to renew lease without actually run another parachain: https://github.com/paritytech/polkadot/issues/6685 Always treat parachain that never produced block for a significant amount of time as unlocked: https://github.com/paritytech/polkadot/issues/7539 -Unresolved Questions +Unresolved Questions None at this stage. -Future Directions and Related Material +Future Directions and Related Material This RFC is only intended to be a short term solution. Slots will be removed in future and lock mechanism is likely going to be replaced with a more generalized parachain manage & recovery system in future. Therefore long term impacts of this RFC are not considered. 1 https://github.com/paritytech/cumulus/issues/377 @@ -3084,19 +3497,19 @@ This can be unified and simplified by moving both parts into the runtime. Authors@brenzi for Encointer Association, 8000 Zurich, Switzerland -Summary +Summary Encointer is a system chain on Kusama since Jan 2022 and has been developed and maintained by the Encointer association. This RFC proposes to treat Encointer like any other system chain and include it in the fellowship repo with this PR. -Motivation +Motivation Encointer does not seek to be in control of its runtime repository. As a decentralized system, the fellowship has a more suitable structure to maintain a system chain runtime repo than the Encointer association does. Also, Encointer aims to update its runtime in batches with other system chains in order to have consistency for interoperability across system chains. -Stakeholders +Stakeholders Fellowship: Will continue to take upon them the review and auditing work for the Encointer runtime, but the process is streamlined with other system chains and therefore less time-consuming compared to the separate repo and CI process we currently have. Kusama Network: Tokenholders can easily see the changes of all system chains in one place. Encointer Association: Further decentralization of the Encointer Network necessities like devops. Encointer devs: Being able to work directly in the Fellowship runtimes repo to streamline and synergize with other developers. -Explanation +Explanation Our PR has all details about our runtime and how we would move it into the fellowship repo. Noteworthy: All Encointer-specific pallets will still be located in encointer's repo for the time being: https://github.com/encointer/pallets It will still be the duty of the Encointer team to keep its runtime up to date and provide adequate test fixtures. Frequent dependency bumps with Polkadot releases would be beneficial for interoperability and could be streamlined with other system chains but that will not be a duty of fellowship. Whenever possible, all system chains could be upgraded jointly (including Encointer) with a batch referendum. @@ -3105,17 +3518,17 @@ This can be unified and simplified by moving both parts into the runtime. Encointer will publish all its crates crates.io Encointer does not carry out external auditing of its runtime nor pallets. It would be beneficial but not a requirement from our side if Encointer could join the auditing process of other system chains. -Drawbacks +Drawbacks Other than all other system chains, development and maintenance of the Encointer Network is mainly financed by the KSM Treasury and possibly the DOT Treasury in the future. Encointer is dedicated to maintaining its network and runtime code for as long as possible, but there is a dependency on funding which is not in the hands of the fellowship. The only risk in the context of funding, however, is that the Encointer runtime will see less frequent updates if there's less funding. -Testing, Security, and Privacy +Testing, Security, and Privacy No changes to the existing system are proposed. Only changes to how maintenance is organized. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility No changes -Prior Art and References +Prior Art and References Existing Encointer runtime repo -Unresolved Questions +Unresolved Questions None identified -Future Directions and Related Material +Future Directions and Related Material More info on Encointer: encointer.org (source) Table of Contents @@ -4035,11 +4448,11 @@ other privacy-enhancing mechanisms to address this concern. AuthorsJoe Petrowski, Gavin Wood -Summary +Summary The Relay Chain contains most of the core logic for the Polkadot network. While this was necessary prior to the launch of parachains and development of XCM, most of this logic can exist in parachains. This is a proposal to migrate several subsystems into system parachains. -Motivation +Motivation Polkadot's scaling approach allows many distinct state machines (known generally as parachains) to operate with common guarantees about the validity and security of their state transitions. Polkadot provides these common guarantees by executing the state transitions on a strict subset (a backing @@ -4051,13 +4464,13 @@ blockspace) to the network. By minimising state transition logic on the Relay Chain by migrating it into "system chains" -- a set of parachains that, with the Relay Chain, make up the Polkadot protocol -- the Polkadot Ubiquitous Computer can maximise its primary offering: secure blockspace. -Stakeholders +Stakeholders Parachains that interact with affected logic on the Relay Chain; Core protocol and XCM format developers; Tooling, block explorer, and UI developers. -Explanation +Explanation The following pallets and subsystems are good candidates to migrate from the Relay Chain: Identity @@ -4203,36 +4616,36 @@ sensible to rehearse a migration. Staking is the subsystem most constrained by PoV limits. Ensuring that elections, payouts, session changes, offences/slashes, etc. work in a parachain on Kusama -- with its larger validator set -- will give confidence to the chain's robustness on Polkadot. -Drawbacks +Drawbacks These subsystems will have reduced resources in cores than on the Relay Chain. Staking in particular may require some optimizations to deal with constraints. -Testing, Security, and Privacy +Testing, Security, and Privacy Standard audit/review requirements apply. More powerful multi-chain integration test tools would be useful in developement. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility Describe the impact of the proposal on the exposed functionality of Polkadot. -Performance +Performance This is an optimization. The removal of public/user transactions on the Relay Chain ensures that its primary resources are allocated to system performance. -Ergonomics +Ergonomics This proposal alters very little for coretime users (e.g. parachain developers). Application developers will need to interact with multiple chains, making ergonomic light client tools particularly important for application development. For existing parachains that interact with these subsystems, they will need to configure their runtimes to recognize the new locations in the network. -Compatibility +Compatibility Implementing this proposal will require some changes to pallet APIs and/or a pub-sub protocol. Application developers will need to interact with multiple chains in the network. -Prior Art and References +Prior Art and References Transactionless Relay-chain Moving Staking off the Relay Chain -Unresolved Questions +Unresolved Questions There remain some implementation questions, like how to use balances for both Staking and Governance. See, for example, Moving Staking off the Relay Chain. -Future Directions and Related Material +Future Directions and Related Material Ideally the Relay Chain becomes transactionless, such that not even balances are represented there. With Staking and Governance off the Relay Chain, this is not an unreasonable next step. With Identity on Polkadot, Kusama may opt to drop its People Chain. @@ -4267,13 +4680,13 @@ With Staking and Governance off the Relay Chain, this is not an unreasonable nex AuthorsVedhavyas Singareddi -Summary +Summary At the moment, we have system_version field on RuntimeVersion that derives which state version is used for the Storage. We have a use case where we want extrinsics root is derived using StateVersion::V1. Without defining a new field under RuntimeVersion, we would like to propose adding system_version that can be used to derive both storage and extrinsic state version. -Motivation +Motivation Since the extrinsic state version is always StateVersion::V0, deriving extrinsic root requires full extrinsic data. This would be problematic when we need to verify the extrinsics root if the extrinsic sizes are bigger. This problem is further explored in https://github.com/polkadot-fellows/RFCs/issues/19 @@ -4285,11 +4698,11 @@ One of the main challenge here is some extrinsics could be big enough that this included in the Consensus block due to Block's weight restriction. If the extrinsic root is derived using StateVersion::V1, then we do not need to pass the full extrinsic data but rather at maximum, 32 byte of extrinsic data. -Stakeholders +Stakeholders Technical Fellowship, in its role of maintaining system runtimes. -Explanation +Explanation In order to use project specific StateVersion for extrinsic roots, we proposed an implementation that introduced parameter to frame_system::Config but that unfortunately did not feel correct. @@ -4315,26 +4728,26 @@ pub const VERSION: RuntimeVersion = RuntimeVersion { system_version: 1, }; }
1. Multi-Block-Migrations: The runtime is being put into lock-down mode for the duration of the migration process by returning OnlyInherents from initialize_block. This ensures that no user provided transaction can interfere with the migration process. It is absolutely necessary to ensure this, otherwise a transaction could call into un-migrated storage and violate storage invariants.
OnlyInherents
initialize_block
2. poll is possible by using apply_extrinsic as entry-point and not hindered by this approach. It would not be possible to use a pallet inherent like System::last_inherent to achieve this for two reasons: First is that pallets do not have access to AllPalletsWithSystem which is required to invoke the poll hook on all pallets. Second is that the runtime does currently not enforce an order of inherents.
apply_extrinsic
System::last_inherent
3. System::PostInherents can be done in the same manner as poll.
The previous drawback of cementing the order of inherents has been addressed and removed by redesigning the approach. No further drawbacks have been identified thus far.
The new logic of initialize_block can be tested by checking that the block-builder will skip transactions when OnlyInherents is returned.
Security: n/a
Privacy: n/a
The performance overhead is minimal in the sense that no clutter was added after fulfilling the requirements. The only performance difference is that initialize_block also returns an enum that needs to be passed through the WASM boundary. This should be negligible.
The new interface allows for more extensible runtime logic. In the future, this will be utilized for multi-block-migrations which should be a huge ergonomic advantage for parachain developers.
The advice here is OPTIONAL and outside of the RFC. To not degrade user experience, it is recommended to ensure that an updated node can still import historic blocks.
The RFC is currently being implemented in polkadot-sdk#1781 (formerly substrate#14275). Related issues and merge requests:
Please suggest a better name for BlockExecutiveMode. We already tried: RuntimeExecutiveMode, ExtrinsicInclusionMode. The names of the modes Normal and Minimal were also called AllExtrinsics and OnlyInherents, so if you have naming preferences; please post them. => renamed to ExtrinsicInclusionMode
BlockExecutiveMode
RuntimeExecutiveMode
Normal
Minimal
AllExtrinsics
Is post_inherents more consistent instead of last_inherent? Then we should change it. => renamed to last_inherent
post_inherents
last_inherent
The long-term future here is to move the block building logic into the runtime. Currently there is a tight dance between the block author and the runtime; the author has to call into different runtime functions in quick succession and exact order. Any misstep causes the block to be invalid. This can be unified and simplified by moving both parts into the runtime.
This RFC proposes a set of changes to the parachain lock mechanism. The goal is to allow a parachain manager to self-service the parachain without root track governance action.
This is achieved by remove existing lock conditions and only lock a parachain when:
The manager of a parachain has permission to manage the parachain when the parachain is unlocked. Parachains are by default locked when onboarded to a slot. This requires the parachain wasm/genesis must be valid, otherwise a root track governance action on relaychain is required to update the parachain.
The current reliance on root track governance actions for managing parachains can be time-consuming and burdensome. This RFC aims to address this technical difficulty by allowing parachain managers to take self-service actions, rather than relying on general public voting.
The key scenarios this RFC seeks to improve are:
A parachain can either be locked or unlocked3. With parachain locked, the parachain manager does not have any privileges. With parachain unlocked, the parachain manager can perform following actions with the paras_registrar pallet:
paras_registrar
Parachain locks are designed in such way to ensure the decentralization of parachains. If parachains are not locked when it should be, it could introduce centralization risk for new parachains.
For example, one possible scenario is that a collective may decide to launch a parachain fully decentralized. However, if the parachain is unable to produce block, the parachain manager will be able to replace the wasm and genesis without the consent of the collective.
It is considered this risk is tolerable as it requires the wasm/genesis to be invalid at first place. It is not yet practically possible to develop a parachain without any centralized risk currently.
Another case is that a parachain team may decide to use crowdloan to help secure a slot lease. Previously, creating a crowdloan will lock a parachain. This means crowdloan participants will know exactly the genesis of the parachain for the crowdloan they are participating. However, this actually providers little assurance to crowdloan participants. For example, if the genesis block is determined before a crowdloan is started, it is not possible to have onchain mechanism to enforce reward distributions for crowdloan participants. They always have to rely on the parachain team to fulfill the promise after the parachain is alive.
Existing operational parachains will not be impacted.
The implementation of this RFC will be tested on testnets (Rococo and Westend) first.
An audit maybe required to ensure the implementation does not introduce unwanted side effects.
There is no privacy related concerns.
This RFC should not introduce any performance impact.
This RFC should improve the developer experiences for new and existing parachain teams
This RFC is fully compatibility with existing interfaces.
None at this stage.
This RFC is only intended to be a short term solution. Slots will be removed in future and lock mechanism is likely going to be replaced with a more generalized parachain manage & recovery system in future. Therefore long term impacts of this RFC are not considered.
https://github.com/paritytech/cumulus/issues/377 @@ -3084,19 +3497,19 @@ This can be unified and simplified by moving both parts into the runtime.
Encointer is a system chain on Kusama since Jan 2022 and has been developed and maintained by the Encointer association. This RFC proposes to treat Encointer like any other system chain and include it in the fellowship repo with this PR.
Encointer does not seek to be in control of its runtime repository. As a decentralized system, the fellowship has a more suitable structure to maintain a system chain runtime repo than the Encointer association does.
Also, Encointer aims to update its runtime in batches with other system chains in order to have consistency for interoperability across system chains.
Our PR has all details about our runtime and how we would move it into the fellowship repo.
Noteworthy: All Encointer-specific pallets will still be located in encointer's repo for the time being: https://github.com/encointer/pallets
It will still be the duty of the Encointer team to keep its runtime up to date and provide adequate test fixtures. Frequent dependency bumps with Polkadot releases would be beneficial for interoperability and could be streamlined with other system chains but that will not be a duty of fellowship. Whenever possible, all system chains could be upgraded jointly (including Encointer) with a batch referendum.
Other than all other system chains, development and maintenance of the Encointer Network is mainly financed by the KSM Treasury and possibly the DOT Treasury in the future. Encointer is dedicated to maintaining its network and runtime code for as long as possible, but there is a dependency on funding which is not in the hands of the fellowship. The only risk in the context of funding, however, is that the Encointer runtime will see less frequent updates if there's less funding.
No changes to the existing system are proposed. Only changes to how maintenance is organized.
No changes
Existing Encointer runtime repo
None identified
More info on Encointer: encointer.org
The Relay Chain contains most of the core logic for the Polkadot network. While this was necessary prior to the launch of parachains and development of XCM, most of this logic can exist in parachains. This is a proposal to migrate several subsystems into system parachains.
Polkadot's scaling approach allows many distinct state machines (known generally as parachains) to operate with common guarantees about the validity and security of their state transitions. Polkadot provides these common guarantees by executing the state transitions on a strict subset (a backing @@ -4051,13 +4464,13 @@ blockspace) to the network.
By minimising state transition logic on the Relay Chain by migrating it into "system chains" -- a set of parachains that, with the Relay Chain, make up the Polkadot protocol -- the Polkadot Ubiquitous Computer can maximise its primary offering: secure blockspace.
The following pallets and subsystems are good candidates to migrate from the Relay Chain:
These subsystems will have reduced resources in cores than on the Relay Chain. Staking in particular may require some optimizations to deal with constraints.
Standard audit/review requirements apply. More powerful multi-chain integration test tools would be useful in developement.
Describe the impact of the proposal on the exposed functionality of Polkadot.
This is an optimization. The removal of public/user transactions on the Relay Chain ensures that its primary resources are allocated to system performance.
This proposal alters very little for coretime users (e.g. parachain developers). Application developers will need to interact with multiple chains, making ergonomic light client tools particularly important for application development.
For existing parachains that interact with these subsystems, they will need to configure their runtimes to recognize the new locations in the network.
Implementing this proposal will require some changes to pallet APIs and/or a pub-sub protocol. Application developers will need to interact with multiple chains in the network.
There remain some implementation questions, like how to use balances for both Staking and Governance. See, for example, Moving Staking off the Relay Chain.
Ideally the Relay Chain becomes transactionless, such that not even balances are represented there. With Staking and Governance off the Relay Chain, this is not an unreasonable next step.
With Identity on Polkadot, Kusama may opt to drop its People Chain.
At the moment, we have system_version field on RuntimeVersion that derives which state version is used for the Storage. We have a use case where we want extrinsics root is derived using StateVersion::V1. Without defining a new field under RuntimeVersion, we would like to propose adding system_version that can be used to derive both storage and extrinsic state version.
system_version
RuntimeVersion
StateVersion::V1
Since the extrinsic state version is always StateVersion::V0, deriving extrinsic root requires full extrinsic data. This would be problematic when we need to verify the extrinsics root if the extrinsic sizes are bigger. This problem is further explored in https://github.com/polkadot-fellows/RFCs/issues/19
StateVersion::V0
In order to use project specific StateVersion for extrinsic roots, we proposed an implementation that introduced parameter to frame_system::Config but that unfortunately did not feel correct. @@ -4315,26 +4728,26 @@ pub const VERSION: RuntimeVersion = RuntimeVersion { system_version: 1, }; }
frame_system::Config
There should be no drawbacks as it would replace state_version with same behavior but documentation should be updated so that chains know which system_version to use.
state_version
AFAIK, should not have any impact on the security or privacy.
These changes should be compatible for existing chains if they use state_version value for system_verision.
system_verision
I do not believe there is any performance hit with this change.
This does not break any exposed Apis.
This change should not break any compatibility.
We proposed introducing a similar change by introducing a parameter to frame_system::Config but did not feel that is the correct way of introducing this change.
I do not have any specific questions about this change at the moment.
IMO, this change is pretty self-contained and there won't be any future work necessary.
This RFC proposes a new host function for parachains, storage_proof_size. It shall provide the size of the currently recorded storage proof to the runtime. Runtime authors can use the proof size to improve block utilization by retroactively reclaiming unused storage weight.
storage_proof_size
The number of extrinsics that are included in a parachain block is limited by two constraints: execution time and proof size. FRAME weights cover both concepts, and block-builders use them to decide how many extrinsics to include in a block. However, these weights are calculated ahead of time by benchmarking on a machine with reference hardware. The execution-time properties of the state-trie and its storage items are unknown at benchmarking time. Therefore, we make some assumptions about the state-trie:
These pessimistic assumptions lead to an overestimation of storage weight, negatively impacting block utilization on parachains.
In addition, the current model does not account for multiple accesses to the same storage items. While these repetitive accesses will not increase storage-proof size, the runtime-side weight monitoring will account for them multiple times. Since the proof size is completely opaque to the runtime, we can not implement retroactive storage weight correction.
A solution must provide a way for the runtime to track the exact storage-proof size consumed on a per-extrinsic basis.
This RFC proposes a new host function that exposes the storage-proof size to the runtime. As a result, runtimes can implement storage weight reclaiming mechanisms that improve block utilization.
This RFC proposes the following host function signature:
#![allow(unused)] @@ -4387,14 +4800,14 @@ is the correct way of introducing this change. fn ext_storage_proof_size_version_1() -> u64; }
The host function MUST return an unsigned 64-bit integer value representing the current proof size. In block-execution and block-import contexts, this function MUST return the current size of the proof. To achieve this, parachain node implementors need to enable proof recording for block imports. In other contexts, this function MUST return 18446744073709551615 (u64::MAX), which represents disabled proof recording.
Parachain nodes need to enable proof recording during block import to correctly implement the proposed host function. Benchmarking conducted with balance transfers has shown a performance reduction of around 0.6% when proof recording is enabled.
The host function proposed in this RFC allows parachain runtime developers to keep track of the proof size. Typical usage patterns would be to keep track of the overall proof size or the difference between subsequent calls to the host function.
Parachain teams will need to include this host function to upgrade.
This RFC proposes changing the current deposit requirements on the Polkadot and Kusama Asset Hub for creating an NFT collection, minting an individual NFT, and lowering its corresponding metadata and attribute deposits. The objective is to lower the barrier to entry for NFT creators, fostering a more inclusive and vibrant ecosystem while maintaining network integrity and preventing spam.
The current deposit of 10 DOT for collection creation (along with 0.01 DOT for item deposit and 0.2 DOT for metadata and attribute deposits) on the Polkadot Asset Hub and 0.1 KSM on Kusama Asset Hub presents a significant financial barrier for many NFT creators. By lowering the deposit @@ -4470,7 +4883,7 @@ low.
deposit
Previous discussions have been held within the Polkadot Forum, with artists expressing their concerns about the deposit amounts.
This RFC proposes a revision of the deposit constants in the configuration of the NFTs pallet on the Polkadot Asset Hub. The new deposit amounts would be determined by a standard deposit formula.
As of v1.1.1, the Collection Deposit is 10 DOT and the Item Deposit is 0.01 DOT (see @@ -4555,7 +4968,7 @@ application to avoid sudden rate changes, as in:
where the constant a moves the inflection to lower or higher x values, the constant b adjusts the rate of the deposit increase, and the independent variable x is the number of collections or items, depending on application.
a
x
b
Modifying deposit requirements necessitates a balanced assessment of the potential drawbacks. Highlighted below are cogent points extracted from the discourse on the Polkadot Forum conversation, @@ -4584,22 +4997,22 @@ stakeholders wouldn't be much affected. As of date 9th January 2024 there are 42 Polkadot Asset Hub and 191 on Kusama Asset Hub with a relatively low volume.
As noted above, state bloat is a security concern. In the case of abuse, governance could adapt by increasing deposit rates and/or using forceDestroy on collections agreed to be spam.
forceDestroy
The primary performance consideration stems from the potential for state bloat due to increased activity from lower deposit requirements. It's vital to monitor and manage this to avoid any negative impact on the chain's performance. Strategies for mitigating state bloat, including efficient data management and periodic reviews of storage requirements, will be essential.
The proposed change aims to enhance the user experience for artists, traders, and utilizers of Kusama and Polkadot Asset Hubs, making Polkadot and Kusama more accessible and user-friendly.
The change does not impact compatibility as a redeposit function is already implemented.
redeposit
If this RFC is accepted, there should not be any unresolved questions regarding how to adapt the implementation of deposits for NFT collections.
Propose a way of permuting the availability chunk indices assigned to validators, in the context of recovering available data from systematic chunks, with the purpose of fairly distributing network bandwidth usage.
Currently, the ValidatorIndex is always identical to the ChunkIndex. Since the validator array is only shuffled once per session, naively using the ValidatorIndex as the ChunkIndex would pose an unreasonable stress on the first N/3 validators during an entire session, when favouring availability recovery from systematic chunks.
Relay chain node core developers.
An erasure coding algorithm is considered systematic if it preserves the original unencoded data as part of the resulting code. @@ -4855,7 +5268,7 @@ struct (added in https://github.com/paritytech/polkadot-sdk/pull/2177Configuration::set_node_feature extrinsic. Once the feature is enabled and new configuration is live, the validator->chunk mapping ceases to be a 1:1 mapping and systematic recovery may begin.
https://github.com/paritytech/polkadot-sdk/pull/2177Configuration::set_node_feature
core_index
CandidateReceipt
Extensive testing will be conducted - both automated and manual. This proposal doesn't affect security or privacy.
This is a necessary data availability optimisation, as reed-solomon erasure coding has proven to be a top consumer of CPU time in polkadot as we scale up the parachain block size and number of availability cores.
With this optimisation, preliminary performance results show that CPU time used for reed-solomon coding/decoding can be halved and total POV recovery time decrease by 80% for large POVs. See more here.
Not applicable.
This is a breaking change. See upgrade path section above. All validators and collators need to have upgraded their node versions before the feature will be enabled via a governance call.
See comments on the tracking issue and the in-progress PR
This enables future optimisations for the performance of availability recovery, such as retrieving batched systematic chunks from backers/approval-checkers.
This RFC proposes to changes the SessionKeys::generate_session_keys runtime api interface. This runtime api is used by validator operators to generate new session keys on a node. The public session keys are then registered manually on chain by the validator operator. Before this RFC it was not possible by the on chain logic to ensure that the account setting the public session keys is also in @@ -4969,7 +5382,7 @@ possession of the private session keys. To solve this the RFC proposes to pass t registration on chain to generate_session_keys. Further this RFC proposes to change the return value of the generate_session_keys function also to not only return the public session keys, but also the proof of ownership for the private session keys. The validator operator will then need to send the public session keys and the proof together when registering new session keys on chain.
SessionKeys::generate_session_keys
generate_session_keys
When submitting the new public session keys to the on chain logic there doesn't exist any verification of possession of the private session keys. This means that users can basically register any kind of public session keys on chain. While the on chain logic ensures that there are no duplicate keys, someone could try to prevent others from registering new session keys by setting them first. While this wouldn't bring @@ -4977,13 +5390,13 @@ the "attacker" any kind of advantage, more like disadvantages (potenti e.g. changing its session key in the event of a private session key leak.
After this RFC this kind of attack would not be possible anymore, because the on chain logic can verify that the sending account is in ownership of the private session keys.
We are first going to explain the proof format being used:
proof
#![allow(unused)] fn main() { @@ -5017,31 +5430,31 @@ actual exported function signature looks like: already gets the proof passed as Vec<u8>. This proof needs to be decoded to the actual Proof type as explained above. The proof and the SCALE encoded account_id of the sender are used to verify the ownership of the SessionKeys. -Drawbacks +Drawbacks Validator operators need to pass the their account id when rotating their session keys in a node. This will require updating some high level docs and making users familiar with the slightly changed ergonomics. -Testing, Security, and Privacy +Testing, Security, and Privacy Testing of the new changes only requires passing an appropriate owner for the current testing context. The changes to the proof generation and verification got audited to ensure they are correct. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance The session key generation is an offchain process and thus, doesn't influence the performance of the chain. Verifying the proof is done on chain as part of the transaction logic for setting the session keys. The verification of the proof is a signature verification number of individual session keys times. As setting the session keys is happening quite rarely, it should not influence the overall system performance. -Ergonomics +Ergonomics The interfaces have been optimized to make it as easy as possible to generate the ownership proof. -Compatibility +Compatibility Introduces a new version of the SessionKeys runtime api. Thus, nodes should be updated before a runtime is enacted that contains these changes otherwise they will fail to generate session keys. The RPC that exists around this runtime api needs to be updated to support passing the account id and for returning the ownership proof alongside the public session keys. UIs would need to be updated to support the new RPC and the changed on chain logic. -Prior Art and References +Prior Art and References None. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material Substrate implementation of the RFC. (source) Table of Contents @@ -5079,10 +5492,10 @@ and for returning the ownership proof alongside the public session keys. AuthorsJoe Petrowski, Gavin Wood -Summary +Summary The Fellowship Manifesto states that members should receive a monthly allowance on par with gross income in OECD countries. This RFC proposes concrete amounts. -Motivation +Motivation One motivation for the Technical Fellowship is to provide an incentive mechanism that can induct and retain technical talent for the continued progress of the network. In order for members to uphold their commitment to the network, they should receive support to @@ -5092,12 +5505,12 @@ on par with a full-time job. Providing a livable wage to those making such contr pragmatic to work full-time on Polkadot. Note: Goals of the Fellowship, expectations for each Dan, and conditions for promotion and demotion are all explained in the Manifesto. This RFC is only to propose concrete values for allowances. -Stakeholders +Stakeholders Fellowship members Polkadot Treasury -Explanation +Explanation This RFC proposes agreeing on salaries relative to a single level, the III Dan. As such, changes to the amount or asset used would only be on a single value, and all others would adjust relatively. A III Dan is someone whose contributions match the expectations of a full-time individual contributor. @@ -5157,19 +5570,19 @@ other hand, more people will likely join the Fellowship in the coming years. Updates Updates to these levels, whether relative ratios, the asset used, or the amount, shall be done via RFC. -Drawbacks +Drawbacks By not using DOT for payment, the protocol relies on the stability of other assets and the ability to acquire them. However, the asset of choice can be changed in the future. -Testing, Security, and Privacy +Testing, Security, and Privacy N/A. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance N/A -Ergonomics +Ergonomics N/A -Compatibility +Compatibility N/A -Prior Art and References +Prior Art and References The Polkadot Fellowship Manifesto @@ -5177,7 +5590,7 @@ Manifesto Indeed: Average Salary for Engineers, United States -Unresolved Questions +Unresolved Questions None at present. (source) Table of Contents @@ -5210,11 +5623,11 @@ States AuthorsPierre Krieger -Summary +Summary When two peers connect to each other, they open (amongst other things) a so-called "notifications protocol" substream dedicated to gossiping transactions to each other. Each notification on this substream currently consists in a SCALE-encoded Vec<Transaction> where Transaction is defined in the runtime. This RFC proposes to modify the format of the notification to become (Compact(1), Transaction). This maintains backwards compatibility, as this new format decodes as a Vec of length equal to 1. -Motivation +Motivation There exists three motivations behind this change: @@ -5227,9 +5640,9 @@ States It makes the implementation way more straight-forward by not having to repeat code related to back-pressure. See explanations below. -Stakeholders +Stakeholders Low-level developers. -Explanation +Explanation To give an example, if you send one notification with three transactions, the bytes that are sent on the wire are: concat( leb128(total-size-in-bytes-of-the-rest), @@ -5249,23 +5662,23 @@ A SCALE-compact encoded 1 is one byte of value 4. In o This is equivalent to forcing the Vec<Transaction> to always have a length of 1, and I expect the Substrate implementation to simply modify the sending side to add a for loop that sends one notification per item in the Vec. As explained in the motivation section, this allows extracting scale(transaction) items without having to know how to decode them. By "flattening" the two-steps hierarchy, an implementation only needs to back-pressure individual notifications rather than back-pressure notifications and transactions within notifications. -Drawbacks +Drawbacks This RFC chooses to maintain backwards compatibility at the cost of introducing a very small wart (the Compact(1)). An alternative could be to introduce a new version of the transactions notifications protocol that sends one Transaction per notification, but this is significantly more complicated to implement and can always be done later in case the Compact(1) is bothersome. -Testing, Security, and Privacy +Testing, Security, and Privacy Irrelevant. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance Irrelevant. -Ergonomics +Ergonomics Irrelevant. -Compatibility +Compatibility The change is backwards compatible if done in two steps: modify the sender to always send one transaction per notification, then, after a while, modify the receiver to enforce the new format. -Prior Art and References +Prior Art and References Irrelevant. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material None. This is a simple isolated change. (source) Table of Contents @@ -5305,20 +5718,20 @@ This is equivalent to forcing the Vec<Transaction> to always AuthorsPierre Krieger -Summary +Summary This RFC proposes to make the mechanism of RFC #8 more generic by introducing the concept of "capabilities". Implementations can implement certain "capabilities", such as serving old block headers or being a parachain bootnode. The discovery mechanism of RFC #8 is extended to be able to discover nodes of specific capabilities. -Motivation +Motivation The Polkadot peer-to-peer network is made of nodes. Not all these nodes are equal. Some nodes store only the headers of recent blocks, some nodes store all the block headers and bodies since the genesis, some nodes store the storage of all blocks since the genesis, and so on. It is currently not possible to know ahead of time (without connecting to it and asking) which nodes have which data available, and it is not easily possible to build a list of nodes that have a specific piece of data available. If you want to download for example the header of block 500, you have to connect to a randomly-chosen node, ask it for block 500, and if it says that it doesn't have the block, disconnect and try another randomly-chosen node. In certain situations such as downloading the storage of old blocks, nodes that have the information are relatively rare, and finding through trial and error a node that has the data can take a long time. This RFC attempts to solve this problem by giving the possibility to build a list of nodes that are capable of serving specific data. -Stakeholders +Stakeholders Low-level client developers. People interested in accessing the archive of the chain. -Explanation +Explanation Reading RFC #8 first might help with comprehension, as this RFC is very similar. Please keep in mind while reading that everything below applies for both relay chains and parachains, except mentioned otherwise. Capabilities @@ -5354,30 +5767,30 @@ If blocks pruning is enabled and the chain is a relay chain, then Substrate unfo Implementations that have the head of the chain provider capability do not register themselves as providers, but instead are the nodes that participate in the main DHT. In other words, they are the nodes that serve requests of the /<genesis_hash>/kad protocol. Any implementation that isn't a head of the chain provider (read: light clients) must not participate in the main DHT. This is already presently the case. Implementations must not participate in the main DHT if they don't fulfill the capability yet. For example, a node that is still in the process of warp syncing must not participate in the main DHT. However, assuming that warp syncing doesn't last more than a few seconds, it is acceptable to ignore this requirement in order to avoid complicating implementations too much. -Drawbacks +Drawbacks None that I can see. -Testing, Security, and Privacy +Testing, Security, and Privacy The content of this section is basically the same as the one in RFC 8. This mechanism doesn't add or remove any security by itself, as it relies on existing mechanisms. Due to the way Kademlia works, it would become the responsibility of the 20 Polkadot nodes whose sha256(peer_id) is closest to the key (described in the explanations section) to store the list of nodes that have specific capabilities. Furthermore, when a large number of providers are registered, only the providers closest to the key are kept, up to a certain implementation-defined limit. For this reason, an attacker can abuse this mechanism by randomly generating libp2p PeerIds until they find the 20 entries closest to the key representing the target capability. They are then in control of the list of nodes with that capability. While doing this can in no way be actually harmful, it could lead to eclipse attacks. Because the key changes periodically and isn't predictable, and assuming that the Polkadot DHT is sufficiently large, it is not realistic for an attack like this to be maintained in the long term. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance The DHT mechanism generally has a low overhead, especially given that publishing providers is done only every 24 hours. Doing a Kademlia iterative query then sending a provider record shouldn't take more than around 50 kiB in total of bandwidth for the parachain bootnode. Assuming 1000 nodes with a specific capability, the 20 Polkadot full nodes corresponding to that capability will each receive a sudden spike of a few megabytes of networking traffic when the key rotates. Again, this is relatively negligible. If this becomes a problem, one can add a random delay before a node registers itself to be the provider of the key corresponding to BabeApi_next_epoch. Maybe the biggest uncertainty is the traffic that the 20 Polkadot full nodes will receive from light clients that desire knowing the nodes with a capability. If this every becomes a problem, this value of 20 is an arbitrary constant that can be increased for more redundancy. -Ergonomics +Ergonomics Irrelevant. -Compatibility +Compatibility Irrelevant. -Prior Art and References +Prior Art and References Unknown. -Unresolved Questions +Unresolved Questions While it fundamentally doesn't change much to this RFC, using BabeApi_currentEpoch and BabeApi_nextEpoch might be inappropriate. I'm not familiar enough with good practices within the runtime to have an opinion here. Should it be an entirely new pallet? -Future Directions and Related Material +Future Directions and Related Material This RFC would make it possible to reliably discover archive nodes, which would make it possible to reliably send archive node requests, something that isn't currently possible. This could solve the problem of finding archive RPC node providers by migrating archive-related request to using the native peer-to-peer protocol rather than JSON-RPC. If we ever decide to break backwards compatibility, we could divide the "history" and "archive" capabilities in two, between nodes capable of serving older blocks and nodes capable of serving newer blocks. We could even add to the peer-to-peer network nodes that are only capable of serving older blocks (by reading from a database) but do not participate in the head of the chain, and that just exist for historical purposes. @@ -5426,12 +5839,12 @@ We could even add to the peer-to-peer network nodes that are only capable of ser AuthorsZondax AG, Parity Technologies -Summary +Summary To interact with chains in the Polkadot ecosystem it is required to know how transactions are encoded and how to read state. For doing this, Polkadot-SDK, the framework used by most of the chains in the Polkadot ecosystem, exposes metadata about the runtime to the outside. UIs, wallets, and others can use this metadata to interact with these chains. This makes the metadata a crucial piece of the transaction encoding as users are relying on the interacting software to encode the transactions in the correct format. It gets even more important when the user signs the transaction in an offline wallet, as the device by its nature cannot get access to the metadata without relying on the online wallet to provide it. This makes it so that the offline wallet needs to trust an online party, deeming the security assumptions of the offline devices, mute. This RFC proposes a way for offline wallets to leverage metadata, within the constraints of these. The design idea is that the metadata is chunked and these chunks are put into a merkle tree. The root hash of this merkle tree represents the metadata. The offline wallets can use the root hash to decode transactions by getting proofs for the individual chunks of the metadata. This root hash is also included in the signed data of the transaction (but not sent as part of the transaction). The runtime is then including its known metadata root hash when verifying the transaction. If the metadata root hash known by the runtime differs from the one that the offline wallet used, it very likely means that the online wallet provided some fake data and the verification of the transaction fails. Users depend on offline wallets to correctly display decoded transactions before signing. With merkleized metadata, they can be assured of the transaction's legitimacy, as incorrect transactions will be rejected by the runtime. -Motivation +Motivation Polkadot's innovative design (both relay chain and parachains) present the ability to developers to upgrade their network as frequently as they need. These systems manage to have integrations working after the upgrades with the help of FRAME Metadata. This Metadata, which is in the order of half a MiB for most Polkadot-SDK chains, completely describes chain interfaces and properties. Securing this metadata is key for users to be able to interact with the Polkadot-SDK chain in the expected way. On the other hand, offline wallets provide a secure way for Blockchain users to hold their own keys (some do a better job than others). These devices seldomly get upgraded, usually account for one particular network and hold very small internal memories. Currently in the Polkadot ecosystem there is no secure way of having these offline devices know the latest Metadata of the Polkadot-SDK chain they are interacting with. This results in a plethora of similar yet slightly different offline wallets for all different Polkadot-SDK chains, as well as the impediment of keeping these regularly updated, thus not fully leveraging Polkadot-SDK’s unique forkless upgrade feature. The two main reasons why this is not possible today are: @@ -5458,14 +5871,14 @@ We could even add to the peer-to-peer network nodes that are only capable of ser Chunks handling mechanism SHOULD support chunks being sent in any order without memory utilization overhead; Unused enum variants MUST be stripped (this has great impact on transmitted metadata size; examples: era enum, enum with all calls for call batching). -Stakeholders +Stakeholders Runtime implementors UI/wallet implementors Offline wallet implementors The idea for this RFC was brought up by runtime implementors and was extensively discussed with offline wallet implementors. It was designed in such a way that it can work easily with the existing offline wallet solutions in the Polkadot ecosystem. -Explanation +Explanation The FRAME metadata provides a wide range of information about a FRAME based runtime. It contains information about the pallets, the calls per pallet, the storage entries per pallet, runtime APIs, and type information about most of the types that are used in the runtime. For decoding extrinsics on an offline wallet, what is mainly required is type information. Most of the other information in the FRAME metadata is actually not required for decoding extrinsics and thus it can be removed. Therefore, the following is a proposal on a custom representation of the metadata and how this custom metadata is chunked, ensuring that only the needed chunks required for decoding a particular extrinsic are sent to the offline wallet. The necessary information to transform the FRAME metadata type information into the type information presented in this RFC will be provided. However, not every single detail on how to convert from FRAME metadata into the RFC type information is described. First, the MetadataDigest is introduced. After that, ExtrinsicMetadata is covered and finally the actual format of the type information. Then pruning of unrelated type information is covered and how to generate the TypeRefs. In the latest step, merkle tree calculation is explained. Metadata digest @@ -5736,23 +6149,23 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] Included in the extrinsic is u8, the "mode". The mode is either 0 which means to not include the metadata hash in the signed data or the mode is 1 to include the metadata hash in V1. Included in the signed data is an Option<[u8; 32]>. Depending on the mode the value is either None or Some(metadata_hash). -Drawbacks +Drawbacks The chunking may not be the optimal case for every kind of offline wallet. -Testing, Security, and Privacy +Testing, Security, and Privacy All implementations are required to strictly follow the RFC to generate the metadata hash. This includes which hash function to use and how to construct the metadata types tree. So, all implementations are following the same security criteria. As the chains will calculate the metadata hash at compile time, the build process needs to be trusted. However, this is already a solved problem in the Polkadot ecosystem by using reproducible builds. So, anyone can rebuild a chain runtime to ensure that a proposal is actually containing the changes as advertised. Implementations can also be tested easily against each other by taking some metadata and ensuring that they all come to the same metadata hash. Privacy of users should also not be impacted. This assumes that wallets will generate the metadata hash locally and don't leak any information to third party services about which chunks a user will send to their offline wallet. Besides that, there is no leak of private information as getting the raw metadata from the chain is an operation that is done by almost everyone. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance There should be no measurable impact on performance to Polkadot or any other chain using this feature. The metadata root hash is calculated at compile time and at runtime it is optionally used when checking the signature of a transaction. This means that at runtime no performance heavy operations are done. Ergonomics & Compatibility The proposal alters the way a transaction is built, signed, and verified. So, this imposes some required changes to any kind of developer who wants to construct transactions for Polkadot or any chain using this feature. As the developer can pass 0 for disabling the verification of the metadata root hash, it can be easily ignored. -Prior Art and References +Prior Art and References RFC 46 produced by the Alzymologist team is a previous work reference that goes in this direction as well. On other ecosystems, there are other solutions to the problem of trusted signing. Cosmos for example has a standardized way of transforming a transaction into some textual representation and this textual representation is included in the signed data. Basically achieving the same as what the RFC proposes, but it requires that for every transaction applied in a block, every node in the network always has to generate this textual representation to ensure the transaction signature is valid. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material Does it work with all kind of offline wallets? Generic types currently appear multiple times in the metadata with each instantiation. It could be may be useful to have generic type only once in the metadata and declare the generic parameters at their instantiation. @@ -5790,20 +6203,20 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] AuthorsGeorge Pisaltu -Summary +Summary This RFC proposes a change to the extrinsic format to incorporate a new transaction type, the "general" transaction. -Motivation +Motivation "General" transactions, a new type of transaction that this RFC aims to support, are transactions which obey the runtime's extensions and have according extension data yet do not have hard-coded signatures. They are first described in Extrinsic Horizon and supported in 3685. They enable users to authorize origins in new, more flexible ways (e.g. ZK proofs, mutations over pre-authenticated origins). As of now, all transactions are limited to the account signing model for origin authorization and any additional origin changes happen in extrinsic logic, which cannot leverage the validation process of extensions. An example of a use case for such an extension would be sponsoring the transaction fee for some other user. A new extension would be put in place to verify that a part of the initial payload was signed by the author under who the extrinsic should run and change the origin, but the payment for the whole transaction should be handled under a sponsor's account. A POC for this can be found in 3712. The new "general" transaction type would coexist with both current transaction types for a while and, therefore, the current number of supported transaction types, capped at 2, is insufficient. A new extrinsic type must be introduced alongside the current signed and unsigned types. Currently, an encoded extrinsic's first byte indicate the type of extrinsic using the most significant bit - 0 for unsigned, 1 for signed - and the 7 following bits indicate the extrinsic format version, which has been equal to 4 for a long time. By taking one bit from the extrinsic format version encoding, we can support 2 additional extrinsic types while also having a minimal impact on our capability to extend and change the extrinsic format in the future. -Stakeholders +Stakeholders Runtime users Runtime devs Wallet devs -Explanation +Explanation An extrinsic is currently encoded as one byte to identify the extrinsic type and version. This RFC aims to change the interpretation of this byte regarding the reserved bits for the extrinsic type and version. In the following explanation, bits represented using T make up the extrinsic type and bits represented using V make up the extrinsic version. Currently, the bit allocation within the leading encoded byte is 0bTVVV_VVVV. In practice in the Polkadot ecosystem, the leading byte would be 0bT000_0100 as the version has been equal to 4 for a long time. This RFC proposes for the bit allocation to change to 0bTTVV_VVVV. As a result, the extrinsic format version will be bumped to 5 and the extrinsic type bit representation would change as follows: @@ -5814,23 +6227,23 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] 11reserved -Drawbacks +Drawbacks This change would reduce the maximum possible transaction version from the current 127 to 63. In order to bypass the new, lower limit, the extrinsic format would have to change again. -Testing, Security, and Privacy +Testing, Security, and Privacy There is no impact on testing, security or privacy. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility This change would allow Polkadot to support new types of transactions, with the specific "general" transaction type in mind at the time of writing this proposal. -Performance +Performance There is no performance impact. -Ergonomics +Ergonomics The impact to developers and end-users is minimal as it would just be a bitmask update on their part for parsing the extrinsic type along with the version. -Compatibility +Compatibility This change breaks backwards compatiblity because any transaction that is neither signed nor unsigned, but a new transaction type, would be interpreted as having a future extrinsic format version. -Prior Art and References +Prior Art and References The original design was originally proposed in the TransactionExtension PR, which is also the motivation behind this effort. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material Following this change, the "general" transaction type will be introduced as part of the Extrinsic Horizon effort, which will shape future work. (source) Table of Contents @@ -5863,16 +6276,16 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] AuthorsAlex Gheorghe (alexggh) -Summary +Summary Extend the DHT authority discovery records with a signed creation time, so that nodes can determine which record is newer and always decide to prefer the newer records to the old ones. -Motivation +Motivation Currently, we use the Kademlia DHT for storing records regarding the p2p address of an authority discovery key, the problem is that if the nodes decide to change its PeerId/Network key it will publish a new record, however because of the distributed and replicated nature of the DHT there is no way to tell which record is newer so both old PeerId and the new PeerId will live in the network until the old one expires(36h), that creates all sort of problem and leads to the node changing its address not being properly connected for up to 36h. After this RFC, nodes are extended to decide to keep the new record and propagate the new record to nodes that have the old record stored, so in the end all the nodes will converge faster to the new record(in the order of minutes, not 36h) Implementation of the rfc: https://github.com/paritytech/polkadot-sdk/pull/3786. Current issue without this enhacement: https://github.com/paritytech/polkadot-sdk/issues/3673 -Stakeholders +Stakeholders Polkadot node developers. -Explanation +Explanation This RFC heavily relies on the functionalities of the Kademlia DHT already in use by Polkadot. You can find a link to the specification here. In a nutshell, on a specific node the current authority-discovery protocol publishes Kademila DHT records at startup and periodically. The records contain the full address of the node for each authorithy key it owns. The node tries also to find the full address of all authorities in the network by querying the DHT and picking up the first record it finds for each of the authority id it found on chain. @@ -5905,24 +6318,24 @@ You can find a link to the specification Drawbacks +Drawbacks In theory the new protocol creates a bit more traffic on the DHT network, because it waits for DHT records to be received from more than one node, while in the current implementation we just take the first record that we receive and cancel all in-flight requests to other peers. However, because the redundancy factor will be relatively small and this operation happens rarerly, every 10min, this cost is negligible. -Testing, Security, and Privacy +Testing, Security, and Privacy This RFC's implementation https://github.com/paritytech/polkadot-sdk/pull/3786 had been tested on various local test networks and versi. With regard to security the creation time is wrapped inside SignedAuthorityRecord wo it will be signed with the authority id key, so there is no way for other malicious nodes to manipulate this field without the received node observing. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility Irrelevant. -Performance +Performance Irrelevant. -Ergonomics +Ergonomics Irrelevant. -Compatibility +Compatibility The changes are backwards compatible with the existing protocol, so nodes with both the old protocol and newer protocol can exist in the network, this is achieved by the fact that we use protobuf for serializing and deserializing the records, so new fields will be ignore when deserializing with the older protocol and vice-versa when deserializing an old record with the new protocol the new field will be None and the new code accepts this record as being valid. -Prior Art and References +Prior Art and References The enhancements have been inspired by the algorithm specified in here -Unresolved Questions +Unresolved Questions N/A -Future Directions and Related Material +Future Directions and Related Material N/A (source) Table of Contents @@ -5968,23 +6381,23 @@ in order to speed up the time until all nodes have the newest record, nodes can AuthorsJonas Gehrlein & Alistair Stewart -Summary +Summary This RFC proposes a flexible unbonding mechanism for tokens that are locked from staking on the Relay Chain (DOT/KSM), aiming to enhance user convenience without compromising system security. Locking tokens for staking ensures that Polkadot is able to slash tokens backing misbehaving validators. With changing the locking period, we still need to make sure that Polkadot can slash enough tokens to deter misbehaviour. This means that not all tokens can be unbonded immediately, however we can still allow some tokens to be unbonded quickly. The new mechanism leads to a signficantly reduced unbonding time on average, by queuing up new unbonding requests and scaling their unbonding duration relative to the size of the queue. New requests are executed with a minimum of 2 days, when the queue is comparatively empty, to the conventional 28 days, if the sum of requests (in terms of stake) exceed some threshold. In scenarios between these two bounds, the unbonding duration scales proportionately. The new mechanism will never be worse than the current fixed 28 days. In this document we also present an empirical analysis by retrospectively fitting the proposed mechanism to the historic unbonding timeline and show that the average unbonding duration would drastically reduce, while still being sensitive to large unbonding events. Additionally, we discuss implications for UI, UX, and conviction voting. Note: Our proposition solely focuses on the locks imposed from staking. Other locks, such as governance, remain unchanged. Also, this mechanism should not be confused with the already existing feature of FastUnstake, which lets users unstake tokens immediately that have not received rewards for 28 days or longer. As an initial step to gauge its effectiveness and stability, it is recommended to implement and test this model on Kusama before considering its integration into Polkadot, with appropriate adjustments to the parameters. In the following, however, we limit our discussion to Polkadot. -Motivation +Motivation Polkadot has one of the longest unbonding periods among all Proof-of-Stake protocols, because security is the most important goal. Staking on Polkadot is still attractive compared to other protocols because of its above-average staking APY. However the long unbonding period harms usability and deters potential participants that want to contribute to the security of the network. The current length of the unbonding period imposes significant costs for any entity that even wants to perform basic tasks such as a reorganization / consolidation of their stashes, or updating their private key infrastructure. It also limits participation of users that have a large preference for liquidity. The combination of long unbonding periods and high returns has lead to the proliferation of liquid staking, where parachains or centralised exchanges offer users their staked tokens before the 28 days unbonding period is over either in original DOT/KSM form or derivative tokens. Liquid staking is harmless if few tokens are involved but it could result in many validators being selected by a few entities if a large fraction of DOTs were involved. This may lead to centralization (see here for more discussion on threats of liquid staking) and an opportunity for attacks. The new mechanism greatly increases the competitiveness of Polkadot, while maintaining sufficient security. -Stakeholders +Stakeholders Every DOT/KSM token holder -Explanation +Explanation Before diving into the details of how to implement the unbonding queue, we give readers context about why Polkadot has a 28-day unbonding period in the first place. The reason for it is to prevent long-range attacks (LRA) that becomes theoretically possible if more than 1/3 of validators collude. In essence, a LRA describes the inability of users, who disconnect from the consensus at time t0 and reconnects later, to realize that validators which were legitimate at a certain time, say t0 but dropped out in the meantime, are not to be trusted anymore. That means, for example, a user syncing the state could be fooled by trusting validators that fell outside the active set of validators after t0, and are building a competitive and malicious chain (fork). LRAs of longer than 28 days are mitigated by the use of trusted checkpoints, which are assumed to be no more than 28 days old. A new node that syncs Polkadot will start at the checkpoint and look for proofs of finality of later blocks, signed by 2/3 of the validators. In an LRA fork, some of the validator sets may be different but only if 2/3 of some validator set in the last 28 days signed something incorrect. If we detect an LRA of no more than 28 days with the current unbonding period, then we should be able to detect misbehaviour from over 1/3 of validators whose nominators are still bonded. The stake backing these validators is considerable fraction of the total stake (empirically it is 0.287 or so). If we allowed more than this stake to unbond, without checking who it was backing, then the LRA attack might be free of cost for an attacker. The proposed mechansim allows up to half this stake to unbond within 28 days. This halves the amount of tokens that can be slashed, but this is still very high in absolute terms. For example, at the time of writing (19.06.2024) this would translate to around 120 millions DOTs. @@ -6042,23 +6455,23 @@ The analysis can be reproduced or changed to other parameters using Potential Extension In addition to a simple queue, we could add a market component that lets users always unbond from staking at the minimum possible waiting time)(== LOWER_BOUND, e.g., 2 days), by paying a variable fee. To achieve this, it is reasonable to split the total unbonding capacity into two chunks, with the first capacity for the simple queue and the remaining capacity for the fee-based unbonding. By doing so, we allow users to choose whether they want the quickest unbond and paying a dynamic fee or join the simple queue. Setting a capacity restriction for both queues enables us to guarantee a predictable unbonding time in the simple queue, while allowing users with the respective willingness to pay to get out even earlier. The fees are dynamically adjusted and are proportional to the unbonding stake (and thereby expressed in a percentage of the requested unbonding stake). In contrast to a unified queue, this prevents the issue that users paying a fee jump in front of other users not paying a fee, pushing their unbonding time back (which would be bad for UX). The revenue generated could be burned. This extension and further specifications are left out of this RFC, because it adds further complexity and the empirical analysis above suggests that average unbonding times will already be close the LOWER_BOUND, making a more complex design unnecessary. We advise to first implement the discussed mechanism and assess after some experience whether an extension is desirable. -Drawbacks +Drawbacks Lower security for LRAs: Without a doubt, the theoretical security against LRAs decreases. But, as we argue, the attack is still costly enough to deter attacks and the attack is sufficiently theoretical. Here, the benefits outweigh the costs. Griefing attacks: A large holder could pretend to unbond a large amount of their tokens to prevent other users to exit the network earlier. This would, however be costly due to the fact that the holder loses out on staking rewards. The larger the impact on the queue, the higher the costs. In any case it must be noted that the UPPER_BOUND is still 28 days, which means that nominators are never left with a longer unbonding period than currently. There is not enough gain for the attacker to endure this cost. Challenge for Custodians and Liquid Staking Providers: Changing the unbonding time, especially making it flexible, requires entities that offer staking derivatives to rethink and rework their products. -Testing, Security, and Privacy +Testing, Security, and Privacy NA -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility NA -Performance +Performance The authors cannot see any potential impact on performance. -Ergonomics +Ergonomics The authors cannot see any potential impact on ergonomics for developers. We discussed potential impact on UX/UI for users above. -Compatibility +Compatibility The authors cannot see any potential impact on compatibility. This should be assessed by the technical fellows. -Prior Art and References +Prior Art and References Ethereum proposed a similar solution Alistair did some initial write-up @@ -6095,20 +6508,20 @@ The analysis can be reproduced or changed to other parameters using Summary +Summary This RFC proposes a change to the extrinsic format to include a transaction extension version. -Motivation +Motivation The extrinsic format supports to be extended with transaction extensions. These transaction extensions are runtime specific and can be different per chain. Each transaction extension can add data to the extrinsic itself or extend the signed payload. This means that adding a transaction extension is breaking the chain specific extrinsic format. A recent example was the introduction of the CheckMetadatHash to Polkadot and all its system chains. As the extension was adding one byte to the extrinsic, it broke a lot of tooling. By introducing an extra version for the transaction extensions it will be possible to introduce changes to these transaction extensions while still being backwards compatible. Based on the version of the transaction extensions, each chain runtime could decode the extrinsic correctly and also create the correct signed payload. -Stakeholders +Stakeholders Runtime users Runtime devs Wallet devs -Explanation +Explanation RFC84 introduced the extrinsic format 5. The idea is to piggyback onto this change of the extrinsic format to add the extra version for the transaction extensions. If required, this could also come as extrinsic format 6, but 5 is not yet deployed anywhere. The extrinsic format supports the following types of transactions: @@ -6124,25 +6537,25 @@ as extrinsic format 6, but 5 is not yet deployed anywh The Version being a SCALE encoded u8 representing the version of the transaction extensions. In the chain runtime the version can be used to determine which set of transaction extensions should be used to decode and to validate the transaction. -Drawbacks +Drawbacks This adds one byte more to each signed transaction. -Testing, Security, and Privacy +Testing, Security, and Privacy There is no impact on testing, security or privacy. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility This will ensure that changes to the transactions extensions can be done in a backwards compatible way. -Performance +Performance There is no performance impact. -Ergonomics +Ergonomics Runtime developers need to take care of the versioning and ensure to bump as required, so that there are no compatibility breaking changes without a bump of the version. It will also add a little bit more code in the runtime to decode these old versions, but this should be neglectable. -Compatibility +Compatibility When introduced together with extrinsic format version 5 from RFC84, it can be implemented in a backwards compatible way. So, transactions can still be send using the old extrinsic format and decoded by the runtime. -Prior Art and References +Prior Art and References None. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material None. (source) Table of Contents @@ -6179,14 +6592,14 @@ old extrinsic format and decoded by the runtime. AuthorsAdrian Catangiu -Summary +Summary This RFC proposes a new instruction that provides a way to initiate on remote chains, asset transfers which transfer multiple types (teleports, local-reserve, destination-reserve) of assets, using XCM alone. The currently existing instructions are too opinionated and force each XCM asset transfer to a single transfer type (teleport, local-reserve, destination-reserve). This results in inability to combine different types of transfers in single transfer which results in overall poor UX when trying to move assets across chains. -Motivation +Motivation XCM is the de-facto cross-chain messaging protocol within the Polkadot ecosystem, and cross-chain assets transfers is one of its main use-cases. Unfortunately, in its current spec, it does not support initiating on a remote chain, one or more transfers that combine assets with different transfer types. @@ -6208,14 +6621,14 @@ For example, allows single XCM program execution to transfer multiple assets fro Kusama Asset Hub, over the bridge through Polkadot Asset Hub with final destination ParaP on Polkadot. With current XCM, we are limited to doing multiple independent transfers for each individual hop in order to move both "interesting" assets, but also "supporting" assets (used to pay fees). -Stakeholders +Stakeholders Runtime users Runtime devs Wallet devs dApps devs -Explanation +Explanation A new instruction InitiateAssetsTransfer is introduced that initiates an assets transfer from the chain it is executed on, to another chain. The executed transfer is point-to-point (chain-to-chain) with all of the transfer properties specified in the instruction parameters. The instruction also @@ -6403,9 +6816,9 @@ by executing a single XCM message, even though we'll be mixing multiple ).unwrap(); }) } -Drawbacks +Drawbacks No drawbacks identified. -Testing, Security, and Privacy +Testing, Security, and Privacy There should be no security risks related to the new instruction from the XCVM perspective. It follows the same pattern as with single-type asset transfers, only now it allows combining multiple types at once. Improves security by enabling @@ -6414,16 +6827,16 @@ which minimizes the potential free/unpaid work that a receiving chain has to do. required execution fee payment, part of the instruction logic through the remote_fees: Option<AssetTransferFilter> parameter, which will make sure the remote XCM starts with a single-asset-holding-loading-instruction, immediately followed by a BuyExecution using said asset. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility This brings no impact to the rest of the XCM spec. It is a new, independent instruction, no changes to existing instructions. Enhances the exposed functionality of Polkadot. Will allow multi-chain transfers that are currently forced to happen in multiple programs per asset per "hop", to be possible in a single XCM program. -Performance +Performance No performance changes/implications. -Ergonomics +Ergonomics The proposal enhances developers' and users' cross-chain asset transfer capabilities. This enhancement is optimized for XCM programs transferring multiple assets, needing to run their logic across multiple chains. -Compatibility +Compatibility Does this proposal break compatibility with existing interfaces, older versions of implementations? Summarize necessary migrations or upgrade strategies, if any. This enhancement is compatible with all existing XCM programs and versions. @@ -6432,11 +6845,11 @@ success. A program where the new instruction is used to initiate multiple types of asset transfers, cannot be downgraded to older XCM versions, because there is no equivalent capability there. Such conversion attempts will explicitly fail. -Prior Art and References +Prior Art and References None. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material None. (source) Table of Contents @@ -6469,10 +6882,10 @@ Such conversion attempts will explicitly fail. AuthorsAdrian Catangiu -Summary +Summary The Transact XCM instruction currently forces the user to set a specific maximum weight allowed to the inner call and then also pay for that much weight regardless of how much the call actually needs in practice. This RFC proposes improving the usability of Transact by removing that parameter and instead get and charge the actual weight of the inner call from its dispatch info on the remote chain. -Motivation +Motivation The UX of using Transact is poor because of having to guess/estimate the require_weight_at_most weight used by the inner call on the target. We've seen multiple Transact on-chain failures caused by guessing wrong values for this require_weight_at_most even though the rest of the XCM program would have worked. In practice, this parameter only adds UX overhead with no real practical value. Use cases fall in one of two categories: @@ -6485,40 +6898,40 @@ weight limit parameter. We've had multiple OpenGov root/whitelisted_caller proposals initiated by core-devs completely or partially fail because of incorrect configuration of require_weight_at_most parameter. This is a strong indication that the instruction is hard to use. -Stakeholders +Stakeholders
#![allow(unused)] fn main() { @@ -5017,31 +5430,31 @@ actual exported function signature looks like: already gets the proof passed as Vec<u8>. This proof needs to be decoded to the actual Proof type as explained above. The proof and the SCALE encoded account_id of the sender are used to verify the ownership of the SessionKeys. -Drawbacks +Drawbacks Validator operators need to pass the their account id when rotating their session keys in a node. This will require updating some high level docs and making users familiar with the slightly changed ergonomics. -Testing, Security, and Privacy +Testing, Security, and Privacy Testing of the new changes only requires passing an appropriate owner for the current testing context. The changes to the proof generation and verification got audited to ensure they are correct. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance The session key generation is an offchain process and thus, doesn't influence the performance of the chain. Verifying the proof is done on chain as part of the transaction logic for setting the session keys. The verification of the proof is a signature verification number of individual session keys times. As setting the session keys is happening quite rarely, it should not influence the overall system performance. -Ergonomics +Ergonomics The interfaces have been optimized to make it as easy as possible to generate the ownership proof. -Compatibility +Compatibility Introduces a new version of the SessionKeys runtime api. Thus, nodes should be updated before a runtime is enacted that contains these changes otherwise they will fail to generate session keys. The RPC that exists around this runtime api needs to be updated to support passing the account id and for returning the ownership proof alongside the public session keys. UIs would need to be updated to support the new RPC and the changed on chain logic. -Prior Art and References +Prior Art and References None. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material Substrate implementation of the RFC. (source) Table of Contents @@ -5079,10 +5492,10 @@ and for returning the ownership proof alongside the public session keys. AuthorsJoe Petrowski, Gavin Wood -Summary +Summary The Fellowship Manifesto states that members should receive a monthly allowance on par with gross income in OECD countries. This RFC proposes concrete amounts. -Motivation +Motivation One motivation for the Technical Fellowship is to provide an incentive mechanism that can induct and retain technical talent for the continued progress of the network. In order for members to uphold their commitment to the network, they should receive support to @@ -5092,12 +5505,12 @@ on par with a full-time job. Providing a livable wage to those making such contr pragmatic to work full-time on Polkadot. Note: Goals of the Fellowship, expectations for each Dan, and conditions for promotion and demotion are all explained in the Manifesto. This RFC is only to propose concrete values for allowances. -Stakeholders +Stakeholders Fellowship members Polkadot Treasury -Explanation +Explanation This RFC proposes agreeing on salaries relative to a single level, the III Dan. As such, changes to the amount or asset used would only be on a single value, and all others would adjust relatively. A III Dan is someone whose contributions match the expectations of a full-time individual contributor. @@ -5157,19 +5570,19 @@ other hand, more people will likely join the Fellowship in the coming years. Updates Updates to these levels, whether relative ratios, the asset used, or the amount, shall be done via RFC. -Drawbacks +Drawbacks By not using DOT for payment, the protocol relies on the stability of other assets and the ability to acquire them. However, the asset of choice can be changed in the future. -Testing, Security, and Privacy +Testing, Security, and Privacy N/A. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance N/A -Ergonomics +Ergonomics N/A -Compatibility +Compatibility N/A -Prior Art and References +Prior Art and References The Polkadot Fellowship Manifesto @@ -5177,7 +5590,7 @@ Manifesto Indeed: Average Salary for Engineers, United States -Unresolved Questions +Unresolved Questions None at present. (source) Table of Contents @@ -5210,11 +5623,11 @@ States AuthorsPierre Krieger -Summary +Summary When two peers connect to each other, they open (amongst other things) a so-called "notifications protocol" substream dedicated to gossiping transactions to each other. Each notification on this substream currently consists in a SCALE-encoded Vec<Transaction> where Transaction is defined in the runtime. This RFC proposes to modify the format of the notification to become (Compact(1), Transaction). This maintains backwards compatibility, as this new format decodes as a Vec of length equal to 1. -Motivation +Motivation There exists three motivations behind this change: @@ -5227,9 +5640,9 @@ States It makes the implementation way more straight-forward by not having to repeat code related to back-pressure. See explanations below. -Stakeholders +Stakeholders Low-level developers. -Explanation +Explanation To give an example, if you send one notification with three transactions, the bytes that are sent on the wire are: concat( leb128(total-size-in-bytes-of-the-rest), @@ -5249,23 +5662,23 @@ A SCALE-compact encoded 1 is one byte of value 4. In o This is equivalent to forcing the Vec<Transaction> to always have a length of 1, and I expect the Substrate implementation to simply modify the sending side to add a for loop that sends one notification per item in the Vec. As explained in the motivation section, this allows extracting scale(transaction) items without having to know how to decode them. By "flattening" the two-steps hierarchy, an implementation only needs to back-pressure individual notifications rather than back-pressure notifications and transactions within notifications. -Drawbacks +Drawbacks This RFC chooses to maintain backwards compatibility at the cost of introducing a very small wart (the Compact(1)). An alternative could be to introduce a new version of the transactions notifications protocol that sends one Transaction per notification, but this is significantly more complicated to implement and can always be done later in case the Compact(1) is bothersome. -Testing, Security, and Privacy +Testing, Security, and Privacy Irrelevant. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance Irrelevant. -Ergonomics +Ergonomics Irrelevant. -Compatibility +Compatibility The change is backwards compatible if done in two steps: modify the sender to always send one transaction per notification, then, after a while, modify the receiver to enforce the new format. -Prior Art and References +Prior Art and References Irrelevant. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material None. This is a simple isolated change. (source) Table of Contents @@ -5305,20 +5718,20 @@ This is equivalent to forcing the Vec<Transaction> to always AuthorsPierre Krieger -Summary +Summary This RFC proposes to make the mechanism of RFC #8 more generic by introducing the concept of "capabilities". Implementations can implement certain "capabilities", such as serving old block headers or being a parachain bootnode. The discovery mechanism of RFC #8 is extended to be able to discover nodes of specific capabilities. -Motivation +Motivation The Polkadot peer-to-peer network is made of nodes. Not all these nodes are equal. Some nodes store only the headers of recent blocks, some nodes store all the block headers and bodies since the genesis, some nodes store the storage of all blocks since the genesis, and so on. It is currently not possible to know ahead of time (without connecting to it and asking) which nodes have which data available, and it is not easily possible to build a list of nodes that have a specific piece of data available. If you want to download for example the header of block 500, you have to connect to a randomly-chosen node, ask it for block 500, and if it says that it doesn't have the block, disconnect and try another randomly-chosen node. In certain situations such as downloading the storage of old blocks, nodes that have the information are relatively rare, and finding through trial and error a node that has the data can take a long time. This RFC attempts to solve this problem by giving the possibility to build a list of nodes that are capable of serving specific data. -Stakeholders +Stakeholders Low-level client developers. People interested in accessing the archive of the chain. -Explanation +Explanation Reading RFC #8 first might help with comprehension, as this RFC is very similar. Please keep in mind while reading that everything below applies for both relay chains and parachains, except mentioned otherwise. Capabilities @@ -5354,30 +5767,30 @@ If blocks pruning is enabled and the chain is a relay chain, then Substrate unfo Implementations that have the head of the chain provider capability do not register themselves as providers, but instead are the nodes that participate in the main DHT. In other words, they are the nodes that serve requests of the /<genesis_hash>/kad protocol. Any implementation that isn't a head of the chain provider (read: light clients) must not participate in the main DHT. This is already presently the case. Implementations must not participate in the main DHT if they don't fulfill the capability yet. For example, a node that is still in the process of warp syncing must not participate in the main DHT. However, assuming that warp syncing doesn't last more than a few seconds, it is acceptable to ignore this requirement in order to avoid complicating implementations too much. -Drawbacks +Drawbacks None that I can see. -Testing, Security, and Privacy +Testing, Security, and Privacy The content of this section is basically the same as the one in RFC 8. This mechanism doesn't add or remove any security by itself, as it relies on existing mechanisms. Due to the way Kademlia works, it would become the responsibility of the 20 Polkadot nodes whose sha256(peer_id) is closest to the key (described in the explanations section) to store the list of nodes that have specific capabilities. Furthermore, when a large number of providers are registered, only the providers closest to the key are kept, up to a certain implementation-defined limit. For this reason, an attacker can abuse this mechanism by randomly generating libp2p PeerIds until they find the 20 entries closest to the key representing the target capability. They are then in control of the list of nodes with that capability. While doing this can in no way be actually harmful, it could lead to eclipse attacks. Because the key changes periodically and isn't predictable, and assuming that the Polkadot DHT is sufficiently large, it is not realistic for an attack like this to be maintained in the long term. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance The DHT mechanism generally has a low overhead, especially given that publishing providers is done only every 24 hours. Doing a Kademlia iterative query then sending a provider record shouldn't take more than around 50 kiB in total of bandwidth for the parachain bootnode. Assuming 1000 nodes with a specific capability, the 20 Polkadot full nodes corresponding to that capability will each receive a sudden spike of a few megabytes of networking traffic when the key rotates. Again, this is relatively negligible. If this becomes a problem, one can add a random delay before a node registers itself to be the provider of the key corresponding to BabeApi_next_epoch. Maybe the biggest uncertainty is the traffic that the 20 Polkadot full nodes will receive from light clients that desire knowing the nodes with a capability. If this every becomes a problem, this value of 20 is an arbitrary constant that can be increased for more redundancy. -Ergonomics +Ergonomics Irrelevant. -Compatibility +Compatibility Irrelevant. -Prior Art and References +Prior Art and References Unknown. -Unresolved Questions +Unresolved Questions While it fundamentally doesn't change much to this RFC, using BabeApi_currentEpoch and BabeApi_nextEpoch might be inappropriate. I'm not familiar enough with good practices within the runtime to have an opinion here. Should it be an entirely new pallet? -Future Directions and Related Material +Future Directions and Related Material This RFC would make it possible to reliably discover archive nodes, which would make it possible to reliably send archive node requests, something that isn't currently possible. This could solve the problem of finding archive RPC node providers by migrating archive-related request to using the native peer-to-peer protocol rather than JSON-RPC. If we ever decide to break backwards compatibility, we could divide the "history" and "archive" capabilities in two, between nodes capable of serving older blocks and nodes capable of serving newer blocks. We could even add to the peer-to-peer network nodes that are only capable of serving older blocks (by reading from a database) but do not participate in the head of the chain, and that just exist for historical purposes. @@ -5426,12 +5839,12 @@ We could even add to the peer-to-peer network nodes that are only capable of ser AuthorsZondax AG, Parity Technologies -Summary +Summary To interact with chains in the Polkadot ecosystem it is required to know how transactions are encoded and how to read state. For doing this, Polkadot-SDK, the framework used by most of the chains in the Polkadot ecosystem, exposes metadata about the runtime to the outside. UIs, wallets, and others can use this metadata to interact with these chains. This makes the metadata a crucial piece of the transaction encoding as users are relying on the interacting software to encode the transactions in the correct format. It gets even more important when the user signs the transaction in an offline wallet, as the device by its nature cannot get access to the metadata without relying on the online wallet to provide it. This makes it so that the offline wallet needs to trust an online party, deeming the security assumptions of the offline devices, mute. This RFC proposes a way for offline wallets to leverage metadata, within the constraints of these. The design idea is that the metadata is chunked and these chunks are put into a merkle tree. The root hash of this merkle tree represents the metadata. The offline wallets can use the root hash to decode transactions by getting proofs for the individual chunks of the metadata. This root hash is also included in the signed data of the transaction (but not sent as part of the transaction). The runtime is then including its known metadata root hash when verifying the transaction. If the metadata root hash known by the runtime differs from the one that the offline wallet used, it very likely means that the online wallet provided some fake data and the verification of the transaction fails. Users depend on offline wallets to correctly display decoded transactions before signing. With merkleized metadata, they can be assured of the transaction's legitimacy, as incorrect transactions will be rejected by the runtime. -Motivation +Motivation Polkadot's innovative design (both relay chain and parachains) present the ability to developers to upgrade their network as frequently as they need. These systems manage to have integrations working after the upgrades with the help of FRAME Metadata. This Metadata, which is in the order of half a MiB for most Polkadot-SDK chains, completely describes chain interfaces and properties. Securing this metadata is key for users to be able to interact with the Polkadot-SDK chain in the expected way. On the other hand, offline wallets provide a secure way for Blockchain users to hold their own keys (some do a better job than others). These devices seldomly get upgraded, usually account for one particular network and hold very small internal memories. Currently in the Polkadot ecosystem there is no secure way of having these offline devices know the latest Metadata of the Polkadot-SDK chain they are interacting with. This results in a plethora of similar yet slightly different offline wallets for all different Polkadot-SDK chains, as well as the impediment of keeping these regularly updated, thus not fully leveraging Polkadot-SDK’s unique forkless upgrade feature. The two main reasons why this is not possible today are: @@ -5458,14 +5871,14 @@ We could even add to the peer-to-peer network nodes that are only capable of ser Chunks handling mechanism SHOULD support chunks being sent in any order without memory utilization overhead; Unused enum variants MUST be stripped (this has great impact on transmitted metadata size; examples: era enum, enum with all calls for call batching). -Stakeholders +Stakeholders Runtime implementors UI/wallet implementors Offline wallet implementors The idea for this RFC was brought up by runtime implementors and was extensively discussed with offline wallet implementors. It was designed in such a way that it can work easily with the existing offline wallet solutions in the Polkadot ecosystem. -Explanation +Explanation The FRAME metadata provides a wide range of information about a FRAME based runtime. It contains information about the pallets, the calls per pallet, the storage entries per pallet, runtime APIs, and type information about most of the types that are used in the runtime. For decoding extrinsics on an offline wallet, what is mainly required is type information. Most of the other information in the FRAME metadata is actually not required for decoding extrinsics and thus it can be removed. Therefore, the following is a proposal on a custom representation of the metadata and how this custom metadata is chunked, ensuring that only the needed chunks required for decoding a particular extrinsic are sent to the offline wallet. The necessary information to transform the FRAME metadata type information into the type information presented in this RFC will be provided. However, not every single detail on how to convert from FRAME metadata into the RFC type information is described. First, the MetadataDigest is introduced. After that, ExtrinsicMetadata is covered and finally the actual format of the type information. Then pruning of unrelated type information is covered and how to generate the TypeRefs. In the latest step, merkle tree calculation is explained. Metadata digest @@ -5736,23 +6149,23 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] Included in the extrinsic is u8, the "mode". The mode is either 0 which means to not include the metadata hash in the signed data or the mode is 1 to include the metadata hash in V1. Included in the signed data is an Option<[u8; 32]>. Depending on the mode the value is either None or Some(metadata_hash). -Drawbacks +Drawbacks The chunking may not be the optimal case for every kind of offline wallet. -Testing, Security, and Privacy +Testing, Security, and Privacy All implementations are required to strictly follow the RFC to generate the metadata hash. This includes which hash function to use and how to construct the metadata types tree. So, all implementations are following the same security criteria. As the chains will calculate the metadata hash at compile time, the build process needs to be trusted. However, this is already a solved problem in the Polkadot ecosystem by using reproducible builds. So, anyone can rebuild a chain runtime to ensure that a proposal is actually containing the changes as advertised. Implementations can also be tested easily against each other by taking some metadata and ensuring that they all come to the same metadata hash. Privacy of users should also not be impacted. This assumes that wallets will generate the metadata hash locally and don't leak any information to third party services about which chunks a user will send to their offline wallet. Besides that, there is no leak of private information as getting the raw metadata from the chain is an operation that is done by almost everyone. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance There should be no measurable impact on performance to Polkadot or any other chain using this feature. The metadata root hash is calculated at compile time and at runtime it is optionally used when checking the signature of a transaction. This means that at runtime no performance heavy operations are done. Ergonomics & Compatibility The proposal alters the way a transaction is built, signed, and verified. So, this imposes some required changes to any kind of developer who wants to construct transactions for Polkadot or any chain using this feature. As the developer can pass 0 for disabling the verification of the metadata root hash, it can be easily ignored. -Prior Art and References +Prior Art and References RFC 46 produced by the Alzymologist team is a previous work reference that goes in this direction as well. On other ecosystems, there are other solutions to the problem of trusted signing. Cosmos for example has a standardized way of transforming a transaction into some textual representation and this textual representation is included in the signed data. Basically achieving the same as what the RFC proposes, but it requires that for every transaction applied in a block, every node in the network always has to generate this textual representation to ensure the transaction signature is valid. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material Does it work with all kind of offline wallets? Generic types currently appear multiple times in the metadata with each instantiation. It could be may be useful to have generic type only once in the metadata and declare the generic parameters at their instantiation. @@ -5790,20 +6203,20 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] AuthorsGeorge Pisaltu -Summary +Summary This RFC proposes a change to the extrinsic format to incorporate a new transaction type, the "general" transaction. -Motivation +Motivation "General" transactions, a new type of transaction that this RFC aims to support, are transactions which obey the runtime's extensions and have according extension data yet do not have hard-coded signatures. They are first described in Extrinsic Horizon and supported in 3685. They enable users to authorize origins in new, more flexible ways (e.g. ZK proofs, mutations over pre-authenticated origins). As of now, all transactions are limited to the account signing model for origin authorization and any additional origin changes happen in extrinsic logic, which cannot leverage the validation process of extensions. An example of a use case for such an extension would be sponsoring the transaction fee for some other user. A new extension would be put in place to verify that a part of the initial payload was signed by the author under who the extrinsic should run and change the origin, but the payment for the whole transaction should be handled under a sponsor's account. A POC for this can be found in 3712. The new "general" transaction type would coexist with both current transaction types for a while and, therefore, the current number of supported transaction types, capped at 2, is insufficient. A new extrinsic type must be introduced alongside the current signed and unsigned types. Currently, an encoded extrinsic's first byte indicate the type of extrinsic using the most significant bit - 0 for unsigned, 1 for signed - and the 7 following bits indicate the extrinsic format version, which has been equal to 4 for a long time. By taking one bit from the extrinsic format version encoding, we can support 2 additional extrinsic types while also having a minimal impact on our capability to extend and change the extrinsic format in the future. -Stakeholders +Stakeholders Runtime users Runtime devs Wallet devs -Explanation +Explanation An extrinsic is currently encoded as one byte to identify the extrinsic type and version. This RFC aims to change the interpretation of this byte regarding the reserved bits for the extrinsic type and version. In the following explanation, bits represented using T make up the extrinsic type and bits represented using V make up the extrinsic version. Currently, the bit allocation within the leading encoded byte is 0bTVVV_VVVV. In practice in the Polkadot ecosystem, the leading byte would be 0bT000_0100 as the version has been equal to 4 for a long time. This RFC proposes for the bit allocation to change to 0bTTVV_VVVV. As a result, the extrinsic format version will be bumped to 5 and the extrinsic type bit representation would change as follows: @@ -5814,23 +6227,23 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] 11reserved -Drawbacks +Drawbacks This change would reduce the maximum possible transaction version from the current 127 to 63. In order to bypass the new, lower limit, the extrinsic format would have to change again. -Testing, Security, and Privacy +Testing, Security, and Privacy There is no impact on testing, security or privacy. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility This change would allow Polkadot to support new types of transactions, with the specific "general" transaction type in mind at the time of writing this proposal. -Performance +Performance There is no performance impact. -Ergonomics +Ergonomics The impact to developers and end-users is minimal as it would just be a bitmask update on their part for parsing the extrinsic type along with the version. -Compatibility +Compatibility This change breaks backwards compatiblity because any transaction that is neither signed nor unsigned, but a new transaction type, would be interpreted as having a future extrinsic format version. -Prior Art and References +Prior Art and References The original design was originally proposed in the TransactionExtension PR, which is also the motivation behind this effort. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material Following this change, the "general" transaction type will be introduced as part of the Extrinsic Horizon effort, which will shape future work. (source) Table of Contents @@ -5863,16 +6276,16 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] AuthorsAlex Gheorghe (alexggh) -Summary +Summary Extend the DHT authority discovery records with a signed creation time, so that nodes can determine which record is newer and always decide to prefer the newer records to the old ones. -Motivation +Motivation Currently, we use the Kademlia DHT for storing records regarding the p2p address of an authority discovery key, the problem is that if the nodes decide to change its PeerId/Network key it will publish a new record, however because of the distributed and replicated nature of the DHT there is no way to tell which record is newer so both old PeerId and the new PeerId will live in the network until the old one expires(36h), that creates all sort of problem and leads to the node changing its address not being properly connected for up to 36h. After this RFC, nodes are extended to decide to keep the new record and propagate the new record to nodes that have the old record stored, so in the end all the nodes will converge faster to the new record(in the order of minutes, not 36h) Implementation of the rfc: https://github.com/paritytech/polkadot-sdk/pull/3786. Current issue without this enhacement: https://github.com/paritytech/polkadot-sdk/issues/3673 -Stakeholders +Stakeholders Polkadot node developers. -Explanation +Explanation This RFC heavily relies on the functionalities of the Kademlia DHT already in use by Polkadot. You can find a link to the specification here. In a nutshell, on a specific node the current authority-discovery protocol publishes Kademila DHT records at startup and periodically. The records contain the full address of the node for each authorithy key it owns. The node tries also to find the full address of all authorities in the network by querying the DHT and picking up the first record it finds for each of the authority id it found on chain. @@ -5905,24 +6318,24 @@ You can find a link to the specification Drawbacks +Drawbacks In theory the new protocol creates a bit more traffic on the DHT network, because it waits for DHT records to be received from more than one node, while in the current implementation we just take the first record that we receive and cancel all in-flight requests to other peers. However, because the redundancy factor will be relatively small and this operation happens rarerly, every 10min, this cost is negligible. -Testing, Security, and Privacy +Testing, Security, and Privacy This RFC's implementation https://github.com/paritytech/polkadot-sdk/pull/3786 had been tested on various local test networks and versi. With regard to security the creation time is wrapped inside SignedAuthorityRecord wo it will be signed with the authority id key, so there is no way for other malicious nodes to manipulate this field without the received node observing. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility Irrelevant. -Performance +Performance Irrelevant. -Ergonomics +Ergonomics Irrelevant. -Compatibility +Compatibility The changes are backwards compatible with the existing protocol, so nodes with both the old protocol and newer protocol can exist in the network, this is achieved by the fact that we use protobuf for serializing and deserializing the records, so new fields will be ignore when deserializing with the older protocol and vice-versa when deserializing an old record with the new protocol the new field will be None and the new code accepts this record as being valid. -Prior Art and References +Prior Art and References The enhancements have been inspired by the algorithm specified in here -Unresolved Questions +Unresolved Questions N/A -Future Directions and Related Material +Future Directions and Related Material N/A (source) Table of Contents @@ -5968,23 +6381,23 @@ in order to speed up the time until all nodes have the newest record, nodes can AuthorsJonas Gehrlein & Alistair Stewart -Summary +Summary This RFC proposes a flexible unbonding mechanism for tokens that are locked from staking on the Relay Chain (DOT/KSM), aiming to enhance user convenience without compromising system security. Locking tokens for staking ensures that Polkadot is able to slash tokens backing misbehaving validators. With changing the locking period, we still need to make sure that Polkadot can slash enough tokens to deter misbehaviour. This means that not all tokens can be unbonded immediately, however we can still allow some tokens to be unbonded quickly. The new mechanism leads to a signficantly reduced unbonding time on average, by queuing up new unbonding requests and scaling their unbonding duration relative to the size of the queue. New requests are executed with a minimum of 2 days, when the queue is comparatively empty, to the conventional 28 days, if the sum of requests (in terms of stake) exceed some threshold. In scenarios between these two bounds, the unbonding duration scales proportionately. The new mechanism will never be worse than the current fixed 28 days. In this document we also present an empirical analysis by retrospectively fitting the proposed mechanism to the historic unbonding timeline and show that the average unbonding duration would drastically reduce, while still being sensitive to large unbonding events. Additionally, we discuss implications for UI, UX, and conviction voting. Note: Our proposition solely focuses on the locks imposed from staking. Other locks, such as governance, remain unchanged. Also, this mechanism should not be confused with the already existing feature of FastUnstake, which lets users unstake tokens immediately that have not received rewards for 28 days or longer. As an initial step to gauge its effectiveness and stability, it is recommended to implement and test this model on Kusama before considering its integration into Polkadot, with appropriate adjustments to the parameters. In the following, however, we limit our discussion to Polkadot. -Motivation +Motivation Polkadot has one of the longest unbonding periods among all Proof-of-Stake protocols, because security is the most important goal. Staking on Polkadot is still attractive compared to other protocols because of its above-average staking APY. However the long unbonding period harms usability and deters potential participants that want to contribute to the security of the network. The current length of the unbonding period imposes significant costs for any entity that even wants to perform basic tasks such as a reorganization / consolidation of their stashes, or updating their private key infrastructure. It also limits participation of users that have a large preference for liquidity. The combination of long unbonding periods and high returns has lead to the proliferation of liquid staking, where parachains or centralised exchanges offer users their staked tokens before the 28 days unbonding period is over either in original DOT/KSM form or derivative tokens. Liquid staking is harmless if few tokens are involved but it could result in many validators being selected by a few entities if a large fraction of DOTs were involved. This may lead to centralization (see here for more discussion on threats of liquid staking) and an opportunity for attacks. The new mechanism greatly increases the competitiveness of Polkadot, while maintaining sufficient security. -Stakeholders +Stakeholders Every DOT/KSM token holder -Explanation +Explanation Before diving into the details of how to implement the unbonding queue, we give readers context about why Polkadot has a 28-day unbonding period in the first place. The reason for it is to prevent long-range attacks (LRA) that becomes theoretically possible if more than 1/3 of validators collude. In essence, a LRA describes the inability of users, who disconnect from the consensus at time t0 and reconnects later, to realize that validators which were legitimate at a certain time, say t0 but dropped out in the meantime, are not to be trusted anymore. That means, for example, a user syncing the state could be fooled by trusting validators that fell outside the active set of validators after t0, and are building a competitive and malicious chain (fork). LRAs of longer than 28 days are mitigated by the use of trusted checkpoints, which are assumed to be no more than 28 days old. A new node that syncs Polkadot will start at the checkpoint and look for proofs of finality of later blocks, signed by 2/3 of the validators. In an LRA fork, some of the validator sets may be different but only if 2/3 of some validator set in the last 28 days signed something incorrect. If we detect an LRA of no more than 28 days with the current unbonding period, then we should be able to detect misbehaviour from over 1/3 of validators whose nominators are still bonded. The stake backing these validators is considerable fraction of the total stake (empirically it is 0.287 or so). If we allowed more than this stake to unbond, without checking who it was backing, then the LRA attack might be free of cost for an attacker. The proposed mechansim allows up to half this stake to unbond within 28 days. This halves the amount of tokens that can be slashed, but this is still very high in absolute terms. For example, at the time of writing (19.06.2024) this would translate to around 120 millions DOTs. @@ -6042,23 +6455,23 @@ The analysis can be reproduced or changed to other parameters using Potential Extension In addition to a simple queue, we could add a market component that lets users always unbond from staking at the minimum possible waiting time)(== LOWER_BOUND, e.g., 2 days), by paying a variable fee. To achieve this, it is reasonable to split the total unbonding capacity into two chunks, with the first capacity for the simple queue and the remaining capacity for the fee-based unbonding. By doing so, we allow users to choose whether they want the quickest unbond and paying a dynamic fee or join the simple queue. Setting a capacity restriction for both queues enables us to guarantee a predictable unbonding time in the simple queue, while allowing users with the respective willingness to pay to get out even earlier. The fees are dynamically adjusted and are proportional to the unbonding stake (and thereby expressed in a percentage of the requested unbonding stake). In contrast to a unified queue, this prevents the issue that users paying a fee jump in front of other users not paying a fee, pushing their unbonding time back (which would be bad for UX). The revenue generated could be burned. This extension and further specifications are left out of this RFC, because it adds further complexity and the empirical analysis above suggests that average unbonding times will already be close the LOWER_BOUND, making a more complex design unnecessary. We advise to first implement the discussed mechanism and assess after some experience whether an extension is desirable. -Drawbacks +Drawbacks Lower security for LRAs: Without a doubt, the theoretical security against LRAs decreases. But, as we argue, the attack is still costly enough to deter attacks and the attack is sufficiently theoretical. Here, the benefits outweigh the costs. Griefing attacks: A large holder could pretend to unbond a large amount of their tokens to prevent other users to exit the network earlier. This would, however be costly due to the fact that the holder loses out on staking rewards. The larger the impact on the queue, the higher the costs. In any case it must be noted that the UPPER_BOUND is still 28 days, which means that nominators are never left with a longer unbonding period than currently. There is not enough gain for the attacker to endure this cost. Challenge for Custodians and Liquid Staking Providers: Changing the unbonding time, especially making it flexible, requires entities that offer staking derivatives to rethink and rework their products. -Testing, Security, and Privacy +Testing, Security, and Privacy NA -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility NA -Performance +Performance The authors cannot see any potential impact on performance. -Ergonomics +Ergonomics The authors cannot see any potential impact on ergonomics for developers. We discussed potential impact on UX/UI for users above. -Compatibility +Compatibility The authors cannot see any potential impact on compatibility. This should be assessed by the technical fellows. -Prior Art and References +Prior Art and References Ethereum proposed a similar solution Alistair did some initial write-up @@ -6095,20 +6508,20 @@ The analysis can be reproduced or changed to other parameters using Summary +Summary This RFC proposes a change to the extrinsic format to include a transaction extension version. -Motivation +Motivation The extrinsic format supports to be extended with transaction extensions. These transaction extensions are runtime specific and can be different per chain. Each transaction extension can add data to the extrinsic itself or extend the signed payload. This means that adding a transaction extension is breaking the chain specific extrinsic format. A recent example was the introduction of the CheckMetadatHash to Polkadot and all its system chains. As the extension was adding one byte to the extrinsic, it broke a lot of tooling. By introducing an extra version for the transaction extensions it will be possible to introduce changes to these transaction extensions while still being backwards compatible. Based on the version of the transaction extensions, each chain runtime could decode the extrinsic correctly and also create the correct signed payload. -Stakeholders +Stakeholders Runtime users Runtime devs Wallet devs -Explanation +Explanation RFC84 introduced the extrinsic format 5. The idea is to piggyback onto this change of the extrinsic format to add the extra version for the transaction extensions. If required, this could also come as extrinsic format 6, but 5 is not yet deployed anywhere. The extrinsic format supports the following types of transactions: @@ -6124,25 +6537,25 @@ as extrinsic format 6, but 5 is not yet deployed anywh The Version being a SCALE encoded u8 representing the version of the transaction extensions. In the chain runtime the version can be used to determine which set of transaction extensions should be used to decode and to validate the transaction. -Drawbacks +Drawbacks This adds one byte more to each signed transaction. -Testing, Security, and Privacy +Testing, Security, and Privacy There is no impact on testing, security or privacy. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility This will ensure that changes to the transactions extensions can be done in a backwards compatible way. -Performance +Performance There is no performance impact. -Ergonomics +Ergonomics Runtime developers need to take care of the versioning and ensure to bump as required, so that there are no compatibility breaking changes without a bump of the version. It will also add a little bit more code in the runtime to decode these old versions, but this should be neglectable. -Compatibility +Compatibility When introduced together with extrinsic format version 5 from RFC84, it can be implemented in a backwards compatible way. So, transactions can still be send using the old extrinsic format and decoded by the runtime. -Prior Art and References +Prior Art and References None. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material None. (source) Table of Contents @@ -6179,14 +6592,14 @@ old extrinsic format and decoded by the runtime. AuthorsAdrian Catangiu -Summary +Summary This RFC proposes a new instruction that provides a way to initiate on remote chains, asset transfers which transfer multiple types (teleports, local-reserve, destination-reserve) of assets, using XCM alone. The currently existing instructions are too opinionated and force each XCM asset transfer to a single transfer type (teleport, local-reserve, destination-reserve). This results in inability to combine different types of transfers in single transfer which results in overall poor UX when trying to move assets across chains. -Motivation +Motivation XCM is the de-facto cross-chain messaging protocol within the Polkadot ecosystem, and cross-chain assets transfers is one of its main use-cases. Unfortunately, in its current spec, it does not support initiating on a remote chain, one or more transfers that combine assets with different transfer types. @@ -6208,14 +6621,14 @@ For example, allows single XCM program execution to transfer multiple assets fro Kusama Asset Hub, over the bridge through Polkadot Asset Hub with final destination ParaP on Polkadot. With current XCM, we are limited to doing multiple independent transfers for each individual hop in order to move both "interesting" assets, but also "supporting" assets (used to pay fees). -Stakeholders +Stakeholders Runtime users Runtime devs Wallet devs dApps devs -Explanation +Explanation A new instruction InitiateAssetsTransfer is introduced that initiates an assets transfer from the chain it is executed on, to another chain. The executed transfer is point-to-point (chain-to-chain) with all of the transfer properties specified in the instruction parameters. The instruction also @@ -6403,9 +6816,9 @@ by executing a single XCM message, even though we'll be mixing multiple ).unwrap(); }) }
Vec<u8>
Proof
account_id
SessionKeys
Validator operators need to pass the their account id when rotating their session keys in a node. This will require updating some high level docs and making users familiar with the slightly changed ergonomics.
Testing of the new changes only requires passing an appropriate owner for the current testing context. The changes to the proof generation and verification got audited to ensure they are correct.
owner
The session key generation is an offchain process and thus, doesn't influence the performance of the chain. Verifying the proof is done on chain as part of the transaction logic for setting the session keys. The verification of the proof is a signature verification number of individual session keys times. As setting the session keys is happening quite rarely, it should not influence the overall system performance.
The interfaces have been optimized to make it as easy as possible to generate the ownership proof.
Introduces a new version of the SessionKeys runtime api. Thus, nodes should be updated before a runtime is enacted that contains these changes otherwise they will fail to generate session keys. The RPC that exists around this runtime api needs to be updated to support passing the account id and for returning the ownership proof alongside the public session keys.
UIs would need to be updated to support the new RPC and the changed on chain logic.
Substrate implementation of the RFC.
The Fellowship Manifesto states that members should receive a monthly allowance on par with gross income in OECD countries. This RFC proposes concrete amounts.
One motivation for the Technical Fellowship is to provide an incentive mechanism that can induct and retain technical talent for the continued progress of the network.
In order for members to uphold their commitment to the network, they should receive support to @@ -5092,12 +5505,12 @@ on par with a full-time job. Providing a livable wage to those making such contr pragmatic to work full-time on Polkadot.
Note: Goals of the Fellowship, expectations for each Dan, and conditions for promotion and demotion are all explained in the Manifesto. This RFC is only to propose concrete values for allowances.
This RFC proposes agreeing on salaries relative to a single level, the III Dan. As such, changes to the amount or asset used would only be on a single value, and all others would adjust relatively. A III Dan is someone whose contributions match the expectations of a full-time individual contributor. @@ -5157,19 +5570,19 @@ other hand, more people will likely join the Fellowship in the coming years.
Updates to these levels, whether relative ratios, the asset used, or the amount, shall be done via RFC.
By not using DOT for payment, the protocol relies on the stability of other assets and the ability to acquire them. However, the asset of choice can be changed in the future.
N/A.
When two peers connect to each other, they open (amongst other things) a so-called "notifications protocol" substream dedicated to gossiping transactions to each other.
Each notification on this substream currently consists in a SCALE-encoded Vec<Transaction> where Transaction is defined in the runtime.
Vec<Transaction>
Transaction
This RFC proposes to modify the format of the notification to become (Compact(1), Transaction). This maintains backwards compatibility, as this new format decodes as a Vec of length equal to 1.
(Compact(1), Transaction)
Vec
There exists three motivations behind this change:
It makes the implementation way more straight-forward by not having to repeat code related to back-pressure. See explanations below.
Low-level developers.
To give an example, if you send one notification with three transactions, the bytes that are sent on the wire are:
concat( leb128(total-size-in-bytes-of-the-rest), @@ -5249,23 +5662,23 @@ A SCALE-compact encoded 1 is one byte of value 4. In o This is equivalent to forcing the Vec<Transaction> to always have a length of 1, and I expect the Substrate implementation to simply modify the sending side to add a for loop that sends one notification per item in the Vec. As explained in the motivation section, this allows extracting scale(transaction) items without having to know how to decode them. By "flattening" the two-steps hierarchy, an implementation only needs to back-pressure individual notifications rather than back-pressure notifications and transactions within notifications. -Drawbacks +Drawbacks This RFC chooses to maintain backwards compatibility at the cost of introducing a very small wart (the Compact(1)). An alternative could be to introduce a new version of the transactions notifications protocol that sends one Transaction per notification, but this is significantly more complicated to implement and can always be done later in case the Compact(1) is bothersome. -Testing, Security, and Privacy +Testing, Security, and Privacy Irrelevant. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance Irrelevant. -Ergonomics +Ergonomics Irrelevant. -Compatibility +Compatibility The change is backwards compatible if done in two steps: modify the sender to always send one transaction per notification, then, after a while, modify the receiver to enforce the new format. -Prior Art and References +Prior Art and References Irrelevant. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material None. This is a simple isolated change. (source) Table of Contents @@ -5305,20 +5718,20 @@ This is equivalent to forcing the Vec<Transaction> to always AuthorsPierre Krieger -Summary +Summary This RFC proposes to make the mechanism of RFC #8 more generic by introducing the concept of "capabilities". Implementations can implement certain "capabilities", such as serving old block headers or being a parachain bootnode. The discovery mechanism of RFC #8 is extended to be able to discover nodes of specific capabilities. -Motivation +Motivation The Polkadot peer-to-peer network is made of nodes. Not all these nodes are equal. Some nodes store only the headers of recent blocks, some nodes store all the block headers and bodies since the genesis, some nodes store the storage of all blocks since the genesis, and so on. It is currently not possible to know ahead of time (without connecting to it and asking) which nodes have which data available, and it is not easily possible to build a list of nodes that have a specific piece of data available. If you want to download for example the header of block 500, you have to connect to a randomly-chosen node, ask it for block 500, and if it says that it doesn't have the block, disconnect and try another randomly-chosen node. In certain situations such as downloading the storage of old blocks, nodes that have the information are relatively rare, and finding through trial and error a node that has the data can take a long time. This RFC attempts to solve this problem by giving the possibility to build a list of nodes that are capable of serving specific data. -Stakeholders +Stakeholders Low-level client developers. People interested in accessing the archive of the chain. -Explanation +Explanation Reading RFC #8 first might help with comprehension, as this RFC is very similar. Please keep in mind while reading that everything below applies for both relay chains and parachains, except mentioned otherwise. Capabilities @@ -5354,30 +5767,30 @@ If blocks pruning is enabled and the chain is a relay chain, then Substrate unfo Implementations that have the head of the chain provider capability do not register themselves as providers, but instead are the nodes that participate in the main DHT. In other words, they are the nodes that serve requests of the /<genesis_hash>/kad protocol. Any implementation that isn't a head of the chain provider (read: light clients) must not participate in the main DHT. This is already presently the case. Implementations must not participate in the main DHT if they don't fulfill the capability yet. For example, a node that is still in the process of warp syncing must not participate in the main DHT. However, assuming that warp syncing doesn't last more than a few seconds, it is acceptable to ignore this requirement in order to avoid complicating implementations too much. -Drawbacks +Drawbacks None that I can see. -Testing, Security, and Privacy +Testing, Security, and Privacy The content of this section is basically the same as the one in RFC 8. This mechanism doesn't add or remove any security by itself, as it relies on existing mechanisms. Due to the way Kademlia works, it would become the responsibility of the 20 Polkadot nodes whose sha256(peer_id) is closest to the key (described in the explanations section) to store the list of nodes that have specific capabilities. Furthermore, when a large number of providers are registered, only the providers closest to the key are kept, up to a certain implementation-defined limit. For this reason, an attacker can abuse this mechanism by randomly generating libp2p PeerIds until they find the 20 entries closest to the key representing the target capability. They are then in control of the list of nodes with that capability. While doing this can in no way be actually harmful, it could lead to eclipse attacks. Because the key changes periodically and isn't predictable, and assuming that the Polkadot DHT is sufficiently large, it is not realistic for an attack like this to be maintained in the long term. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance The DHT mechanism generally has a low overhead, especially given that publishing providers is done only every 24 hours. Doing a Kademlia iterative query then sending a provider record shouldn't take more than around 50 kiB in total of bandwidth for the parachain bootnode. Assuming 1000 nodes with a specific capability, the 20 Polkadot full nodes corresponding to that capability will each receive a sudden spike of a few megabytes of networking traffic when the key rotates. Again, this is relatively negligible. If this becomes a problem, one can add a random delay before a node registers itself to be the provider of the key corresponding to BabeApi_next_epoch. Maybe the biggest uncertainty is the traffic that the 20 Polkadot full nodes will receive from light clients that desire knowing the nodes with a capability. If this every becomes a problem, this value of 20 is an arbitrary constant that can be increased for more redundancy. -Ergonomics +Ergonomics Irrelevant. -Compatibility +Compatibility Irrelevant. -Prior Art and References +Prior Art and References Unknown. -Unresolved Questions +Unresolved Questions While it fundamentally doesn't change much to this RFC, using BabeApi_currentEpoch and BabeApi_nextEpoch might be inappropriate. I'm not familiar enough with good practices within the runtime to have an opinion here. Should it be an entirely new pallet? -Future Directions and Related Material +Future Directions and Related Material This RFC would make it possible to reliably discover archive nodes, which would make it possible to reliably send archive node requests, something that isn't currently possible. This could solve the problem of finding archive RPC node providers by migrating archive-related request to using the native peer-to-peer protocol rather than JSON-RPC. If we ever decide to break backwards compatibility, we could divide the "history" and "archive" capabilities in two, between nodes capable of serving older blocks and nodes capable of serving newer blocks. We could even add to the peer-to-peer network nodes that are only capable of serving older blocks (by reading from a database) but do not participate in the head of the chain, and that just exist for historical purposes. @@ -5426,12 +5839,12 @@ We could even add to the peer-to-peer network nodes that are only capable of ser AuthorsZondax AG, Parity Technologies -Summary +Summary To interact with chains in the Polkadot ecosystem it is required to know how transactions are encoded and how to read state. For doing this, Polkadot-SDK, the framework used by most of the chains in the Polkadot ecosystem, exposes metadata about the runtime to the outside. UIs, wallets, and others can use this metadata to interact with these chains. This makes the metadata a crucial piece of the transaction encoding as users are relying on the interacting software to encode the transactions in the correct format. It gets even more important when the user signs the transaction in an offline wallet, as the device by its nature cannot get access to the metadata without relying on the online wallet to provide it. This makes it so that the offline wallet needs to trust an online party, deeming the security assumptions of the offline devices, mute. This RFC proposes a way for offline wallets to leverage metadata, within the constraints of these. The design idea is that the metadata is chunked and these chunks are put into a merkle tree. The root hash of this merkle tree represents the metadata. The offline wallets can use the root hash to decode transactions by getting proofs for the individual chunks of the metadata. This root hash is also included in the signed data of the transaction (but not sent as part of the transaction). The runtime is then including its known metadata root hash when verifying the transaction. If the metadata root hash known by the runtime differs from the one that the offline wallet used, it very likely means that the online wallet provided some fake data and the verification of the transaction fails. Users depend on offline wallets to correctly display decoded transactions before signing. With merkleized metadata, they can be assured of the transaction's legitimacy, as incorrect transactions will be rejected by the runtime. -Motivation +Motivation Polkadot's innovative design (both relay chain and parachains) present the ability to developers to upgrade their network as frequently as they need. These systems manage to have integrations working after the upgrades with the help of FRAME Metadata. This Metadata, which is in the order of half a MiB for most Polkadot-SDK chains, completely describes chain interfaces and properties. Securing this metadata is key for users to be able to interact with the Polkadot-SDK chain in the expected way. On the other hand, offline wallets provide a secure way for Blockchain users to hold their own keys (some do a better job than others). These devices seldomly get upgraded, usually account for one particular network and hold very small internal memories. Currently in the Polkadot ecosystem there is no secure way of having these offline devices know the latest Metadata of the Polkadot-SDK chain they are interacting with. This results in a plethora of similar yet slightly different offline wallets for all different Polkadot-SDK chains, as well as the impediment of keeping these regularly updated, thus not fully leveraging Polkadot-SDK’s unique forkless upgrade feature. The two main reasons why this is not possible today are: @@ -5458,14 +5871,14 @@ We could even add to the peer-to-peer network nodes that are only capable of ser Chunks handling mechanism SHOULD support chunks being sent in any order without memory utilization overhead; Unused enum variants MUST be stripped (this has great impact on transmitted metadata size; examples: era enum, enum with all calls for call batching). -Stakeholders +Stakeholders Runtime implementors UI/wallet implementors Offline wallet implementors The idea for this RFC was brought up by runtime implementors and was extensively discussed with offline wallet implementors. It was designed in such a way that it can work easily with the existing offline wallet solutions in the Polkadot ecosystem. -Explanation +Explanation The FRAME metadata provides a wide range of information about a FRAME based runtime. It contains information about the pallets, the calls per pallet, the storage entries per pallet, runtime APIs, and type information about most of the types that are used in the runtime. For decoding extrinsics on an offline wallet, what is mainly required is type information. Most of the other information in the FRAME metadata is actually not required for decoding extrinsics and thus it can be removed. Therefore, the following is a proposal on a custom representation of the metadata and how this custom metadata is chunked, ensuring that only the needed chunks required for decoding a particular extrinsic are sent to the offline wallet. The necessary information to transform the FRAME metadata type information into the type information presented in this RFC will be provided. However, not every single detail on how to convert from FRAME metadata into the RFC type information is described. First, the MetadataDigest is introduced. After that, ExtrinsicMetadata is covered and finally the actual format of the type information. Then pruning of unrelated type information is covered and how to generate the TypeRefs. In the latest step, merkle tree calculation is explained. Metadata digest @@ -5736,23 +6149,23 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] Included in the extrinsic is u8, the "mode". The mode is either 0 which means to not include the metadata hash in the signed data or the mode is 1 to include the metadata hash in V1. Included in the signed data is an Option<[u8; 32]>. Depending on the mode the value is either None or Some(metadata_hash). -Drawbacks +Drawbacks The chunking may not be the optimal case for every kind of offline wallet. -Testing, Security, and Privacy +Testing, Security, and Privacy All implementations are required to strictly follow the RFC to generate the metadata hash. This includes which hash function to use and how to construct the metadata types tree. So, all implementations are following the same security criteria. As the chains will calculate the metadata hash at compile time, the build process needs to be trusted. However, this is already a solved problem in the Polkadot ecosystem by using reproducible builds. So, anyone can rebuild a chain runtime to ensure that a proposal is actually containing the changes as advertised. Implementations can also be tested easily against each other by taking some metadata and ensuring that they all come to the same metadata hash. Privacy of users should also not be impacted. This assumes that wallets will generate the metadata hash locally and don't leak any information to third party services about which chunks a user will send to their offline wallet. Besides that, there is no leak of private information as getting the raw metadata from the chain is an operation that is done by almost everyone. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance There should be no measurable impact on performance to Polkadot or any other chain using this feature. The metadata root hash is calculated at compile time and at runtime it is optionally used when checking the signature of a transaction. This means that at runtime no performance heavy operations are done. Ergonomics & Compatibility The proposal alters the way a transaction is built, signed, and verified. So, this imposes some required changes to any kind of developer who wants to construct transactions for Polkadot or any chain using this feature. As the developer can pass 0 for disabling the verification of the metadata root hash, it can be easily ignored. -Prior Art and References +Prior Art and References RFC 46 produced by the Alzymologist team is a previous work reference that goes in this direction as well. On other ecosystems, there are other solutions to the problem of trusted signing. Cosmos for example has a standardized way of transforming a transaction into some textual representation and this textual representation is included in the signed data. Basically achieving the same as what the RFC proposes, but it requires that for every transaction applied in a block, every node in the network always has to generate this textual representation to ensure the transaction signature is valid. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material Does it work with all kind of offline wallets? Generic types currently appear multiple times in the metadata with each instantiation. It could be may be useful to have generic type only once in the metadata and declare the generic parameters at their instantiation. @@ -5790,20 +6203,20 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] AuthorsGeorge Pisaltu -Summary +Summary This RFC proposes a change to the extrinsic format to incorporate a new transaction type, the "general" transaction. -Motivation +Motivation "General" transactions, a new type of transaction that this RFC aims to support, are transactions which obey the runtime's extensions and have according extension data yet do not have hard-coded signatures. They are first described in Extrinsic Horizon and supported in 3685. They enable users to authorize origins in new, more flexible ways (e.g. ZK proofs, mutations over pre-authenticated origins). As of now, all transactions are limited to the account signing model for origin authorization and any additional origin changes happen in extrinsic logic, which cannot leverage the validation process of extensions. An example of a use case for such an extension would be sponsoring the transaction fee for some other user. A new extension would be put in place to verify that a part of the initial payload was signed by the author under who the extrinsic should run and change the origin, but the payment for the whole transaction should be handled under a sponsor's account. A POC for this can be found in 3712. The new "general" transaction type would coexist with both current transaction types for a while and, therefore, the current number of supported transaction types, capped at 2, is insufficient. A new extrinsic type must be introduced alongside the current signed and unsigned types. Currently, an encoded extrinsic's first byte indicate the type of extrinsic using the most significant bit - 0 for unsigned, 1 for signed - and the 7 following bits indicate the extrinsic format version, which has been equal to 4 for a long time. By taking one bit from the extrinsic format version encoding, we can support 2 additional extrinsic types while also having a minimal impact on our capability to extend and change the extrinsic format in the future. -Stakeholders +Stakeholders Runtime users Runtime devs Wallet devs -Explanation +Explanation An extrinsic is currently encoded as one byte to identify the extrinsic type and version. This RFC aims to change the interpretation of this byte regarding the reserved bits for the extrinsic type and version. In the following explanation, bits represented using T make up the extrinsic type and bits represented using V make up the extrinsic version. Currently, the bit allocation within the leading encoded byte is 0bTVVV_VVVV. In practice in the Polkadot ecosystem, the leading byte would be 0bT000_0100 as the version has been equal to 4 for a long time. This RFC proposes for the bit allocation to change to 0bTTVV_VVVV. As a result, the extrinsic format version will be bumped to 5 and the extrinsic type bit representation would change as follows: @@ -5814,23 +6227,23 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] 11reserved -Drawbacks +Drawbacks This change would reduce the maximum possible transaction version from the current 127 to 63. In order to bypass the new, lower limit, the extrinsic format would have to change again. -Testing, Security, and Privacy +Testing, Security, and Privacy There is no impact on testing, security or privacy. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility This change would allow Polkadot to support new types of transactions, with the specific "general" transaction type in mind at the time of writing this proposal. -Performance +Performance There is no performance impact. -Ergonomics +Ergonomics The impact to developers and end-users is minimal as it would just be a bitmask update on their part for parsing the extrinsic type along with the version. -Compatibility +Compatibility This change breaks backwards compatiblity because any transaction that is neither signed nor unsigned, but a new transaction type, would be interpreted as having a future extrinsic format version. -Prior Art and References +Prior Art and References The original design was originally proposed in the TransactionExtension PR, which is also the motivation behind this effort. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material Following this change, the "general" transaction type will be introduced as part of the Extrinsic Horizon effort, which will shape future work. (source) Table of Contents @@ -5863,16 +6276,16 @@ nodes: [[[2, 3], [4, 5]], [0, 1]] AuthorsAlex Gheorghe (alexggh) -Summary +Summary Extend the DHT authority discovery records with a signed creation time, so that nodes can determine which record is newer and always decide to prefer the newer records to the old ones. -Motivation +Motivation Currently, we use the Kademlia DHT for storing records regarding the p2p address of an authority discovery key, the problem is that if the nodes decide to change its PeerId/Network key it will publish a new record, however because of the distributed and replicated nature of the DHT there is no way to tell which record is newer so both old PeerId and the new PeerId will live in the network until the old one expires(36h), that creates all sort of problem and leads to the node changing its address not being properly connected for up to 36h. After this RFC, nodes are extended to decide to keep the new record and propagate the new record to nodes that have the old record stored, so in the end all the nodes will converge faster to the new record(in the order of minutes, not 36h) Implementation of the rfc: https://github.com/paritytech/polkadot-sdk/pull/3786. Current issue without this enhacement: https://github.com/paritytech/polkadot-sdk/issues/3673 -Stakeholders +Stakeholders Polkadot node developers. -Explanation +Explanation This RFC heavily relies on the functionalities of the Kademlia DHT already in use by Polkadot. You can find a link to the specification here. In a nutshell, on a specific node the current authority-discovery protocol publishes Kademila DHT records at startup and periodically. The records contain the full address of the node for each authorithy key it owns. The node tries also to find the full address of all authorities in the network by querying the DHT and picking up the first record it finds for each of the authority id it found on chain. @@ -5905,24 +6318,24 @@ You can find a link to the specification Drawbacks +Drawbacks In theory the new protocol creates a bit more traffic on the DHT network, because it waits for DHT records to be received from more than one node, while in the current implementation we just take the first record that we receive and cancel all in-flight requests to other peers. However, because the redundancy factor will be relatively small and this operation happens rarerly, every 10min, this cost is negligible. -Testing, Security, and Privacy +Testing, Security, and Privacy This RFC's implementation https://github.com/paritytech/polkadot-sdk/pull/3786 had been tested on various local test networks and versi. With regard to security the creation time is wrapped inside SignedAuthorityRecord wo it will be signed with the authority id key, so there is no way for other malicious nodes to manipulate this field without the received node observing. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility Irrelevant. -Performance +Performance Irrelevant. -Ergonomics +Ergonomics Irrelevant. -Compatibility +Compatibility The changes are backwards compatible with the existing protocol, so nodes with both the old protocol and newer protocol can exist in the network, this is achieved by the fact that we use protobuf for serializing and deserializing the records, so new fields will be ignore when deserializing with the older protocol and vice-versa when deserializing an old record with the new protocol the new field will be None and the new code accepts this record as being valid. -Prior Art and References +Prior Art and References The enhancements have been inspired by the algorithm specified in here -Unresolved Questions +Unresolved Questions N/A -Future Directions and Related Material +Future Directions and Related Material N/A (source) Table of Contents @@ -5968,23 +6381,23 @@ in order to speed up the time until all nodes have the newest record, nodes can AuthorsJonas Gehrlein & Alistair Stewart -Summary +Summary This RFC proposes a flexible unbonding mechanism for tokens that are locked from staking on the Relay Chain (DOT/KSM), aiming to enhance user convenience without compromising system security. Locking tokens for staking ensures that Polkadot is able to slash tokens backing misbehaving validators. With changing the locking period, we still need to make sure that Polkadot can slash enough tokens to deter misbehaviour. This means that not all tokens can be unbonded immediately, however we can still allow some tokens to be unbonded quickly. The new mechanism leads to a signficantly reduced unbonding time on average, by queuing up new unbonding requests and scaling their unbonding duration relative to the size of the queue. New requests are executed with a minimum of 2 days, when the queue is comparatively empty, to the conventional 28 days, if the sum of requests (in terms of stake) exceed some threshold. In scenarios between these two bounds, the unbonding duration scales proportionately. The new mechanism will never be worse than the current fixed 28 days. In this document we also present an empirical analysis by retrospectively fitting the proposed mechanism to the historic unbonding timeline and show that the average unbonding duration would drastically reduce, while still being sensitive to large unbonding events. Additionally, we discuss implications for UI, UX, and conviction voting. Note: Our proposition solely focuses on the locks imposed from staking. Other locks, such as governance, remain unchanged. Also, this mechanism should not be confused with the already existing feature of FastUnstake, which lets users unstake tokens immediately that have not received rewards for 28 days or longer. As an initial step to gauge its effectiveness and stability, it is recommended to implement and test this model on Kusama before considering its integration into Polkadot, with appropriate adjustments to the parameters. In the following, however, we limit our discussion to Polkadot. -Motivation +Motivation Polkadot has one of the longest unbonding periods among all Proof-of-Stake protocols, because security is the most important goal. Staking on Polkadot is still attractive compared to other protocols because of its above-average staking APY. However the long unbonding period harms usability and deters potential participants that want to contribute to the security of the network. The current length of the unbonding period imposes significant costs for any entity that even wants to perform basic tasks such as a reorganization / consolidation of their stashes, or updating their private key infrastructure. It also limits participation of users that have a large preference for liquidity. The combination of long unbonding periods and high returns has lead to the proliferation of liquid staking, where parachains or centralised exchanges offer users their staked tokens before the 28 days unbonding period is over either in original DOT/KSM form or derivative tokens. Liquid staking is harmless if few tokens are involved but it could result in many validators being selected by a few entities if a large fraction of DOTs were involved. This may lead to centralization (see here for more discussion on threats of liquid staking) and an opportunity for attacks. The new mechanism greatly increases the competitiveness of Polkadot, while maintaining sufficient security. -Stakeholders +Stakeholders Every DOT/KSM token holder -Explanation +Explanation Before diving into the details of how to implement the unbonding queue, we give readers context about why Polkadot has a 28-day unbonding period in the first place. The reason for it is to prevent long-range attacks (LRA) that becomes theoretically possible if more than 1/3 of validators collude. In essence, a LRA describes the inability of users, who disconnect from the consensus at time t0 and reconnects later, to realize that validators which were legitimate at a certain time, say t0 but dropped out in the meantime, are not to be trusted anymore. That means, for example, a user syncing the state could be fooled by trusting validators that fell outside the active set of validators after t0, and are building a competitive and malicious chain (fork). LRAs of longer than 28 days are mitigated by the use of trusted checkpoints, which are assumed to be no more than 28 days old. A new node that syncs Polkadot will start at the checkpoint and look for proofs of finality of later blocks, signed by 2/3 of the validators. In an LRA fork, some of the validator sets may be different but only if 2/3 of some validator set in the last 28 days signed something incorrect. If we detect an LRA of no more than 28 days with the current unbonding period, then we should be able to detect misbehaviour from over 1/3 of validators whose nominators are still bonded. The stake backing these validators is considerable fraction of the total stake (empirically it is 0.287 or so). If we allowed more than this stake to unbond, without checking who it was backing, then the LRA attack might be free of cost for an attacker. The proposed mechansim allows up to half this stake to unbond within 28 days. This halves the amount of tokens that can be slashed, but this is still very high in absolute terms. For example, at the time of writing (19.06.2024) this would translate to around 120 millions DOTs. @@ -6042,23 +6455,23 @@ The analysis can be reproduced or changed to other parameters using Potential Extension In addition to a simple queue, we could add a market component that lets users always unbond from staking at the minimum possible waiting time)(== LOWER_BOUND, e.g., 2 days), by paying a variable fee. To achieve this, it is reasonable to split the total unbonding capacity into two chunks, with the first capacity for the simple queue and the remaining capacity for the fee-based unbonding. By doing so, we allow users to choose whether they want the quickest unbond and paying a dynamic fee or join the simple queue. Setting a capacity restriction for both queues enables us to guarantee a predictable unbonding time in the simple queue, while allowing users with the respective willingness to pay to get out even earlier. The fees are dynamically adjusted and are proportional to the unbonding stake (and thereby expressed in a percentage of the requested unbonding stake). In contrast to a unified queue, this prevents the issue that users paying a fee jump in front of other users not paying a fee, pushing their unbonding time back (which would be bad for UX). The revenue generated could be burned. This extension and further specifications are left out of this RFC, because it adds further complexity and the empirical analysis above suggests that average unbonding times will already be close the LOWER_BOUND, making a more complex design unnecessary. We advise to first implement the discussed mechanism and assess after some experience whether an extension is desirable. -Drawbacks +Drawbacks Lower security for LRAs: Without a doubt, the theoretical security against LRAs decreases. But, as we argue, the attack is still costly enough to deter attacks and the attack is sufficiently theoretical. Here, the benefits outweigh the costs. Griefing attacks: A large holder could pretend to unbond a large amount of their tokens to prevent other users to exit the network earlier. This would, however be costly due to the fact that the holder loses out on staking rewards. The larger the impact on the queue, the higher the costs. In any case it must be noted that the UPPER_BOUND is still 28 days, which means that nominators are never left with a longer unbonding period than currently. There is not enough gain for the attacker to endure this cost. Challenge for Custodians and Liquid Staking Providers: Changing the unbonding time, especially making it flexible, requires entities that offer staking derivatives to rethink and rework their products. -Testing, Security, and Privacy +Testing, Security, and Privacy NA -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility NA -Performance +Performance The authors cannot see any potential impact on performance. -Ergonomics +Ergonomics The authors cannot see any potential impact on ergonomics for developers. We discussed potential impact on UX/UI for users above. -Compatibility +Compatibility The authors cannot see any potential impact on compatibility. This should be assessed by the technical fellows. -Prior Art and References +Prior Art and References Ethereum proposed a similar solution Alistair did some initial write-up @@ -6095,20 +6508,20 @@ The analysis can be reproduced or changed to other parameters using Summary +Summary This RFC proposes a change to the extrinsic format to include a transaction extension version. -Motivation +Motivation The extrinsic format supports to be extended with transaction extensions. These transaction extensions are runtime specific and can be different per chain. Each transaction extension can add data to the extrinsic itself or extend the signed payload. This means that adding a transaction extension is breaking the chain specific extrinsic format. A recent example was the introduction of the CheckMetadatHash to Polkadot and all its system chains. As the extension was adding one byte to the extrinsic, it broke a lot of tooling. By introducing an extra version for the transaction extensions it will be possible to introduce changes to these transaction extensions while still being backwards compatible. Based on the version of the transaction extensions, each chain runtime could decode the extrinsic correctly and also create the correct signed payload. -Stakeholders +Stakeholders Runtime users Runtime devs Wallet devs -Explanation +Explanation RFC84 introduced the extrinsic format 5. The idea is to piggyback onto this change of the extrinsic format to add the extra version for the transaction extensions. If required, this could also come as extrinsic format 6, but 5 is not yet deployed anywhere. The extrinsic format supports the following types of transactions: @@ -6124,25 +6537,25 @@ as extrinsic format 6, but 5 is not yet deployed anywh The Version being a SCALE encoded u8 representing the version of the transaction extensions. In the chain runtime the version can be used to determine which set of transaction extensions should be used to decode and to validate the transaction. -Drawbacks +Drawbacks This adds one byte more to each signed transaction. -Testing, Security, and Privacy +Testing, Security, and Privacy There is no impact on testing, security or privacy. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility This will ensure that changes to the transactions extensions can be done in a backwards compatible way. -Performance +Performance There is no performance impact. -Ergonomics +Ergonomics Runtime developers need to take care of the versioning and ensure to bump as required, so that there are no compatibility breaking changes without a bump of the version. It will also add a little bit more code in the runtime to decode these old versions, but this should be neglectable. -Compatibility +Compatibility When introduced together with extrinsic format version 5 from RFC84, it can be implemented in a backwards compatible way. So, transactions can still be send using the old extrinsic format and decoded by the runtime. -Prior Art and References +Prior Art and References None. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material None. (source) Table of Contents @@ -6179,14 +6592,14 @@ old extrinsic format and decoded by the runtime. AuthorsAdrian Catangiu -Summary +Summary This RFC proposes a new instruction that provides a way to initiate on remote chains, asset transfers which transfer multiple types (teleports, local-reserve, destination-reserve) of assets, using XCM alone. The currently existing instructions are too opinionated and force each XCM asset transfer to a single transfer type (teleport, local-reserve, destination-reserve). This results in inability to combine different types of transfers in single transfer which results in overall poor UX when trying to move assets across chains. -Motivation +Motivation XCM is the de-facto cross-chain messaging protocol within the Polkadot ecosystem, and cross-chain assets transfers is one of its main use-cases. Unfortunately, in its current spec, it does not support initiating on a remote chain, one or more transfers that combine assets with different transfer types. @@ -6208,14 +6621,14 @@ For example, allows single XCM program execution to transfer multiple assets fro Kusama Asset Hub, over the bridge through Polkadot Asset Hub with final destination ParaP on Polkadot. With current XCM, we are limited to doing multiple independent transfers for each individual hop in order to move both "interesting" assets, but also "supporting" assets (used to pay fees). -Stakeholders +Stakeholders Runtime users Runtime devs Wallet devs dApps devs -Explanation +Explanation A new instruction InitiateAssetsTransfer is introduced that initiates an assets transfer from the chain it is executed on, to another chain. The executed transfer is point-to-point (chain-to-chain) with all of the transfer properties specified in the instruction parameters. The instruction also @@ -6403,9 +6816,9 @@ by executing a single XCM message, even though we'll be mixing multiple ).unwrap(); }) }
1
4
for
As explained in the motivation section, this allows extracting scale(transaction) items without having to know how to decode them.
scale(transaction)
By "flattening" the two-steps hierarchy, an implementation only needs to back-pressure individual notifications rather than back-pressure notifications and transactions within notifications.
This RFC chooses to maintain backwards compatibility at the cost of introducing a very small wart (the Compact(1)).
Compact(1)
An alternative could be to introduce a new version of the transactions notifications protocol that sends one Transaction per notification, but this is significantly more complicated to implement and can always be done later in case the Compact(1) is bothersome.
The change is backwards compatible if done in two steps: modify the sender to always send one transaction per notification, then, after a while, modify the receiver to enforce the new format.
None. This is a simple isolated change.
This RFC proposes to make the mechanism of RFC #8 more generic by introducing the concept of "capabilities".
Implementations can implement certain "capabilities", such as serving old block headers or being a parachain bootnode.
The discovery mechanism of RFC #8 is extended to be able to discover nodes of specific capabilities.
The Polkadot peer-to-peer network is made of nodes. Not all these nodes are equal. Some nodes store only the headers of recent blocks, some nodes store all the block headers and bodies since the genesis, some nodes store the storage of all blocks since the genesis, and so on.
It is currently not possible to know ahead of time (without connecting to it and asking) which nodes have which data available, and it is not easily possible to build a list of nodes that have a specific piece of data available.
If you want to download for example the header of block 500, you have to connect to a randomly-chosen node, ask it for block 500, and if it says that it doesn't have the block, disconnect and try another randomly-chosen node. In certain situations such as downloading the storage of old blocks, nodes that have the information are relatively rare, and finding through trial and error a node that has the data can take a long time.
This RFC attempts to solve this problem by giving the possibility to build a list of nodes that are capable of serving specific data.
Low-level client developers. People interested in accessing the archive of the chain.
Reading RFC #8 first might help with comprehension, as this RFC is very similar.
Please keep in mind while reading that everything below applies for both relay chains and parachains, except mentioned otherwise.
Implementations that have the head of the chain provider capability do not register themselves as providers, but instead are the nodes that participate in the main DHT. In other words, they are the nodes that serve requests of the /<genesis_hash>/kad protocol.
/<genesis_hash>/kad
Any implementation that isn't a head of the chain provider (read: light clients) must not participate in the main DHT. This is already presently the case.
Implementations must not participate in the main DHT if they don't fulfill the capability yet. For example, a node that is still in the process of warp syncing must not participate in the main DHT. However, assuming that warp syncing doesn't last more than a few seconds, it is acceptable to ignore this requirement in order to avoid complicating implementations too much.
None that I can see.
The content of this section is basically the same as the one in RFC 8.
This mechanism doesn't add or remove any security by itself, as it relies on existing mechanisms.
Due to the way Kademlia works, it would become the responsibility of the 20 Polkadot nodes whose sha256(peer_id) is closest to the key (described in the explanations section) to store the list of nodes that have specific capabilities. Furthermore, when a large number of providers are registered, only the providers closest to the key are kept, up to a certain implementation-defined limit.
sha256(peer_id)
For this reason, an attacker can abuse this mechanism by randomly generating libp2p PeerIds until they find the 20 entries closest to the key representing the target capability. They are then in control of the list of nodes with that capability. While doing this can in no way be actually harmful, it could lead to eclipse attacks.
Because the key changes periodically and isn't predictable, and assuming that the Polkadot DHT is sufficiently large, it is not realistic for an attack like this to be maintained in the long term.
Assuming 1000 nodes with a specific capability, the 20 Polkadot full nodes corresponding to that capability will each receive a sudden spike of a few megabytes of networking traffic when the key rotates. Again, this is relatively negligible. If this becomes a problem, one can add a random delay before a node registers itself to be the provider of the key corresponding to BabeApi_next_epoch.
Maybe the biggest uncertainty is the traffic that the 20 Polkadot full nodes will receive from light clients that desire knowing the nodes with a capability. If this every becomes a problem, this value of 20 is an arbitrary constant that can be increased for more redundancy.
Unknown.
This RFC would make it possible to reliably discover archive nodes, which would make it possible to reliably send archive node requests, something that isn't currently possible. This could solve the problem of finding archive RPC node providers by migrating archive-related request to using the native peer-to-peer protocol rather than JSON-RPC.
If we ever decide to break backwards compatibility, we could divide the "history" and "archive" capabilities in two, between nodes capable of serving older blocks and nodes capable of serving newer blocks. We could even add to the peer-to-peer network nodes that are only capable of serving older blocks (by reading from a database) but do not participate in the head of the chain, and that just exist for historical purposes.
To interact with chains in the Polkadot ecosystem it is required to know how transactions are encoded and how to read state. For doing this, Polkadot-SDK, the framework used by most of the chains in the Polkadot ecosystem, exposes metadata about the runtime to the outside. UIs, wallets, and others can use this metadata to interact with these chains. This makes the metadata a crucial piece of the transaction encoding as users are relying on the interacting software to encode the transactions in the correct format.
It gets even more important when the user signs the transaction in an offline wallet, as the device by its nature cannot get access to the metadata without relying on the online wallet to provide it. This makes it so that the offline wallet needs to trust an online party, deeming the security assumptions of the offline devices, mute.
This RFC proposes a way for offline wallets to leverage metadata, within the constraints of these. The design idea is that the metadata is chunked and these chunks are put into a merkle tree. The root hash of this merkle tree represents the metadata. The offline wallets can use the root hash to decode transactions by getting proofs for the individual chunks of the metadata. This root hash is also included in the signed data of the transaction (but not sent as part of the transaction). The runtime is then including its known metadata root hash when verifying the transaction. If the metadata root hash known by the runtime differs from the one that the offline wallet used, it very likely means that the online wallet provided some fake data and the verification of the transaction fails.
Users depend on offline wallets to correctly display decoded transactions before signing. With merkleized metadata, they can be assured of the transaction's legitimacy, as incorrect transactions will be rejected by the runtime.
Polkadot's innovative design (both relay chain and parachains) present the ability to developers to upgrade their network as frequently as they need. These systems manage to have integrations working after the upgrades with the help of FRAME Metadata. This Metadata, which is in the order of half a MiB for most Polkadot-SDK chains, completely describes chain interfaces and properties. Securing this metadata is key for users to be able to interact with the Polkadot-SDK chain in the expected way.
On the other hand, offline wallets provide a secure way for Blockchain users to hold their own keys (some do a better job than others). These devices seldomly get upgraded, usually account for one particular network and hold very small internal memories. Currently in the Polkadot ecosystem there is no secure way of having these offline devices know the latest Metadata of the Polkadot-SDK chain they are interacting with. This results in a plethora of similar yet slightly different offline wallets for all different Polkadot-SDK chains, as well as the impediment of keeping these regularly updated, thus not fully leveraging Polkadot-SDK’s unique forkless upgrade feature.
The two main reasons why this is not possible today are:
The idea for this RFC was brought up by runtime implementors and was extensively discussed with offline wallet implementors. It was designed in such a way that it can work easily with the existing offline wallet solutions in the Polkadot ecosystem.
The FRAME metadata provides a wide range of information about a FRAME based runtime. It contains information about the pallets, the calls per pallet, the storage entries per pallet, runtime APIs, and type information about most of the types that are used in the runtime. For decoding extrinsics on an offline wallet, what is mainly required is type information. Most of the other information in the FRAME metadata is actually not required for decoding extrinsics and thus it can be removed. Therefore, the following is a proposal on a custom representation of the metadata and how this custom metadata is chunked, ensuring that only the needed chunks required for decoding a particular extrinsic are sent to the offline wallet. The necessary information to transform the FRAME metadata type information into the type information presented in this RFC will be provided. However, not every single detail on how to convert from FRAME metadata into the RFC type information is described.
First, the MetadataDigest is introduced. After that, ExtrinsicMetadata is covered and finally the actual format of the type information. Then pruning of unrelated type information is covered and how to generate the TypeRefs. In the latest step, merkle tree calculation is explained.
MetadataDigest
TypeRef
u8
0
Option<[u8; 32]>
None
Some(metadata_hash)
The chunking may not be the optimal case for every kind of offline wallet.
All implementations are required to strictly follow the RFC to generate the metadata hash. This includes which hash function to use and how to construct the metadata types tree. So, all implementations are following the same security criteria. As the chains will calculate the metadata hash at compile time, the build process needs to be trusted. However, this is already a solved problem in the Polkadot ecosystem by using reproducible builds. So, anyone can rebuild a chain runtime to ensure that a proposal is actually containing the changes as advertised.
Implementations can also be tested easily against each other by taking some metadata and ensuring that they all come to the same metadata hash.
Privacy of users should also not be impacted. This assumes that wallets will generate the metadata hash locally and don't leak any information to third party services about which chunks a user will send to their offline wallet. Besides that, there is no leak of private information as getting the raw metadata from the chain is an operation that is done by almost everyone.
There should be no measurable impact on performance to Polkadot or any other chain using this feature. The metadata root hash is calculated at compile time and at runtime it is optionally used when checking the signature of a transaction. This means that at runtime no performance heavy operations are done.
The proposal alters the way a transaction is built, signed, and verified. So, this imposes some required changes to any kind of developer who wants to construct transactions for Polkadot or any chain using this feature. As the developer can pass 0 for disabling the verification of the metadata root hash, it can be easily ignored.
RFC 46 produced by the Alzymologist team is a previous work reference that goes in this direction as well.
On other ecosystems, there are other solutions to the problem of trusted signing. Cosmos for example has a standardized way of transforming a transaction into some textual representation and this textual representation is included in the signed data. Basically achieving the same as what the RFC proposes, but it requires that for every transaction applied in a block, every node in the network always has to generate this textual representation to ensure the transaction signature is valid.
This RFC proposes a change to the extrinsic format to incorporate a new transaction type, the "general" transaction.
"General" transactions, a new type of transaction that this RFC aims to support, are transactions which obey the runtime's extensions and have according extension data yet do not have hard-coded signatures. They are first described in Extrinsic Horizon and supported in 3685. They enable users to authorize origins in new, more flexible ways (e.g. ZK proofs, mutations over pre-authenticated origins). As of now, all transactions are limited to the account signing model for origin authorization and any additional origin changes happen in extrinsic logic, which cannot leverage the validation process of extensions.
An example of a use case for such an extension would be sponsoring the transaction fee for some other user. A new extension would be put in place to verify that a part of the initial payload was signed by the author under who the extrinsic should run and change the origin, but the payment for the whole transaction should be handled under a sponsor's account. A POC for this can be found in 3712.
The new "general" transaction type would coexist with both current transaction types for a while and, therefore, the current number of supported transaction types, capped at 2, is insufficient. A new extrinsic type must be introduced alongside the current signed and unsigned types. Currently, an encoded extrinsic's first byte indicate the type of extrinsic using the most significant bit - 0 for unsigned, 1 for signed - and the 7 following bits indicate the extrinsic format version, which has been equal to 4 for a long time.
By taking one bit from the extrinsic format version encoding, we can support 2 additional extrinsic types while also having a minimal impact on our capability to extend and change the extrinsic format in the future.
An extrinsic is currently encoded as one byte to identify the extrinsic type and version. This RFC aims to change the interpretation of this byte regarding the reserved bits for the extrinsic type and version. In the following explanation, bits represented using T make up the extrinsic type and bits represented using V make up the extrinsic version.
T
V
Currently, the bit allocation within the leading encoded byte is 0bTVVV_VVVV. In practice in the Polkadot ecosystem, the leading byte would be 0bT000_0100 as the version has been equal to 4 for a long time.
0bTVVV_VVVV
0bT000_0100
This RFC proposes for the bit allocation to change to 0bTTVV_VVVV. As a result, the extrinsic format version will be bumped to 5 and the extrinsic type bit representation would change as follows:
0bTTVV_VVVV
5
This change would reduce the maximum possible transaction version from the current 127 to 63. In order to bypass the new, lower limit, the extrinsic format would have to change again.
127
63
This change would allow Polkadot to support new types of transactions, with the specific "general" transaction type in mind at the time of writing this proposal.
The impact to developers and end-users is minimal as it would just be a bitmask update on their part for parsing the extrinsic type along with the version.
This change breaks backwards compatiblity because any transaction that is neither signed nor unsigned, but a new transaction type, would be interpreted as having a future extrinsic format version.
The original design was originally proposed in the TransactionExtension PR, which is also the motivation behind this effort.
Following this change, the "general" transaction type will be introduced as part of the Extrinsic Horizon effort, which will shape future work.
Extend the DHT authority discovery records with a signed creation time, so that nodes can determine which record is newer and always decide to prefer the newer records to the old ones.
Currently, we use the Kademlia DHT for storing records regarding the p2p address of an authority discovery key, the problem is that if the nodes decide to change its PeerId/Network key it will publish a new record, however because of the distributed and replicated nature of the DHT there is no way to tell which record is newer so both old PeerId and the new PeerId will live in the network until the old one expires(36h), that creates all sort of problem and leads to the node changing its address not being properly connected for up to 36h.
After this RFC, nodes are extended to decide to keep the new record and propagate the new record to nodes that have the old record stored, so in the end all the nodes will converge faster to the new record(in the order of minutes, not 36h)
Implementation of the rfc: https://github.com/paritytech/polkadot-sdk/pull/3786.
Current issue without this enhacement: https://github.com/paritytech/polkadot-sdk/issues/3673
Polkadot node developers.
This RFC heavily relies on the functionalities of the Kademlia DHT already in use by Polkadot. You can find a link to the specification here.
In a nutshell, on a specific node the current authority-discovery protocol publishes Kademila DHT records at startup and periodically. The records contain the full address of the node for each authorithy key it owns. The node tries also to find the full address of all authorities in the network by querying the DHT and picking up the first record it finds for each of the authority id it found on chain.
In theory the new protocol creates a bit more traffic on the DHT network, because it waits for DHT records to be received from more than one node, while in the current implementation we just take the first record that we receive and cancel all in-flight requests to other peers. However, because the redundancy factor will be relatively small and this operation happens rarerly, every 10min, this cost is negligible.
This RFC's implementation https://github.com/paritytech/polkadot-sdk/pull/3786 had been tested on various local test networks and versi.
With regard to security the creation time is wrapped inside SignedAuthorityRecord wo it will be signed with the authority id key, so there is no way for other malicious nodes to manipulate this field without the received node observing.
The changes are backwards compatible with the existing protocol, so nodes with both the old protocol and newer protocol can exist in the network, this is achieved by the fact that we use protobuf for serializing and deserializing the records, so new fields will be ignore when deserializing with the older protocol and vice-versa when deserializing an old record with the new protocol the new field will be None and the new code accepts this record as being valid.
The enhancements have been inspired by the algorithm specified in here
This RFC proposes a flexible unbonding mechanism for tokens that are locked from staking on the Relay Chain (DOT/KSM), aiming to enhance user convenience without compromising system security.
Locking tokens for staking ensures that Polkadot is able to slash tokens backing misbehaving validators. With changing the locking period, we still need to make sure that Polkadot can slash enough tokens to deter misbehaviour. This means that not all tokens can be unbonded immediately, however we can still allow some tokens to be unbonded quickly.
The new mechanism leads to a signficantly reduced unbonding time on average, by queuing up new unbonding requests and scaling their unbonding duration relative to the size of the queue. New requests are executed with a minimum of 2 days, when the queue is comparatively empty, to the conventional 28 days, if the sum of requests (in terms of stake) exceed some threshold. In scenarios between these two bounds, the unbonding duration scales proportionately. The new mechanism will never be worse than the current fixed 28 days.
In this document we also present an empirical analysis by retrospectively fitting the proposed mechanism to the historic unbonding timeline and show that the average unbonding duration would drastically reduce, while still being sensitive to large unbonding events. Additionally, we discuss implications for UI, UX, and conviction voting.
Note: Our proposition solely focuses on the locks imposed from staking. Other locks, such as governance, remain unchanged. Also, this mechanism should not be confused with the already existing feature of FastUnstake, which lets users unstake tokens immediately that have not received rewards for 28 days or longer.
As an initial step to gauge its effectiveness and stability, it is recommended to implement and test this model on Kusama before considering its integration into Polkadot, with appropriate adjustments to the parameters. In the following, however, we limit our discussion to Polkadot.
Polkadot has one of the longest unbonding periods among all Proof-of-Stake protocols, because security is the most important goal. Staking on Polkadot is still attractive compared to other protocols because of its above-average staking APY. However the long unbonding period harms usability and deters potential participants that want to contribute to the security of the network.
The current length of the unbonding period imposes significant costs for any entity that even wants to perform basic tasks such as a reorganization / consolidation of their stashes, or updating their private key infrastructure. It also limits participation of users that have a large preference for liquidity.
The combination of long unbonding periods and high returns has lead to the proliferation of liquid staking, where parachains or centralised exchanges offer users their staked tokens before the 28 days unbonding period is over either in original DOT/KSM form or derivative tokens. Liquid staking is harmless if few tokens are involved but it could result in many validators being selected by a few entities if a large fraction of DOTs were involved. This may lead to centralization (see here for more discussion on threats of liquid staking) and an opportunity for attacks.
The new mechanism greatly increases the competitiveness of Polkadot, while maintaining sufficient security.
Before diving into the details of how to implement the unbonding queue, we give readers context about why Polkadot has a 28-day unbonding period in the first place. The reason for it is to prevent long-range attacks (LRA) that becomes theoretically possible if more than 1/3 of validators collude. In essence, a LRA describes the inability of users, who disconnect from the consensus at time t0 and reconnects later, to realize that validators which were legitimate at a certain time, say t0 but dropped out in the meantime, are not to be trusted anymore. That means, for example, a user syncing the state could be fooled by trusting validators that fell outside the active set of validators after t0, and are building a competitive and malicious chain (fork).
LRAs of longer than 28 days are mitigated by the use of trusted checkpoints, which are assumed to be no more than 28 days old. A new node that syncs Polkadot will start at the checkpoint and look for proofs of finality of later blocks, signed by 2/3 of the validators. In an LRA fork, some of the validator sets may be different but only if 2/3 of some validator set in the last 28 days signed something incorrect.
If we detect an LRA of no more than 28 days with the current unbonding period, then we should be able to detect misbehaviour from over 1/3 of validators whose nominators are still bonded. The stake backing these validators is considerable fraction of the total stake (empirically it is 0.287 or so). If we allowed more than this stake to unbond, without checking who it was backing, then the LRA attack might be free of cost for an attacker. The proposed mechansim allows up to half this stake to unbond within 28 days. This halves the amount of tokens that can be slashed, but this is still very high in absolute terms. For example, at the time of writing (19.06.2024) this would translate to around 120 millions DOTs.
In addition to a simple queue, we could add a market component that lets users always unbond from staking at the minimum possible waiting time)(== LOWER_BOUND, e.g., 2 days), by paying a variable fee. To achieve this, it is reasonable to split the total unbonding capacity into two chunks, with the first capacity for the simple queue and the remaining capacity for the fee-based unbonding. By doing so, we allow users to choose whether they want the quickest unbond and paying a dynamic fee or join the simple queue. Setting a capacity restriction for both queues enables us to guarantee a predictable unbonding time in the simple queue, while allowing users with the respective willingness to pay to get out even earlier. The fees are dynamically adjusted and are proportional to the unbonding stake (and thereby expressed in a percentage of the requested unbonding stake). In contrast to a unified queue, this prevents the issue that users paying a fee jump in front of other users not paying a fee, pushing their unbonding time back (which would be bad for UX). The revenue generated could be burned.
LOWER_BOUND
This extension and further specifications are left out of this RFC, because it adds further complexity and the empirical analysis above suggests that average unbonding times will already be close the LOWER_BOUND, making a more complex design unnecessary. We advise to first implement the discussed mechanism and assess after some experience whether an extension is desirable.
UPPER_BOUND
NA
The authors cannot see any potential impact on performance.
The authors cannot see any potential impact on ergonomics for developers. We discussed potential impact on UX/UI for users above.
The authors cannot see any potential impact on compatibility. This should be assessed by the technical fellows.
This RFC proposes a change to the extrinsic format to include a transaction extension version.
The extrinsic format supports to be extended with transaction extensions. These transaction extensions are runtime specific and can be different per chain. Each transaction extension can add data to the extrinsic itself or extend the signed payload. This means that adding a transaction extension is breaking the chain specific extrinsic format. A recent example was the introduction of the CheckMetadatHash to Polkadot and all its system chains. As the extension was adding one byte to the extrinsic, it broke a lot of tooling. By introducing an extra version for the transaction extensions it will be possible to introduce changes to these transaction extensions while still being backwards compatible. Based on the version of the transaction extensions, each chain runtime could decode the extrinsic correctly and also create the correct signed payload.
CheckMetadatHash
RFC84 introduced the extrinsic format 5. The idea is to piggyback onto this change of the extrinsic format to add the extra version for the transaction extensions. If required, this could also come as extrinsic format 6, but 5 is not yet deployed anywhere.
6
The extrinsic format supports the following types of transactions:
The Version being a SCALE encoded u8 representing the version of the transaction extensions.
Version
In the chain runtime the version can be used to determine which set of transaction extensions should be used to decode and to validate the transaction.
This adds one byte more to each signed transaction.
This will ensure that changes to the transactions extensions can be done in a backwards compatible way.
Runtime developers need to take care of the versioning and ensure to bump as required, so that there are no compatibility breaking changes without a bump of the version. It will also add a little bit more code in the runtime to decode these old versions, but this should be neglectable.
When introduced together with extrinsic format version 5 from RFC84, it can be implemented in a backwards compatible way. So, transactions can still be send using the old extrinsic format and decoded by the runtime.
This RFC proposes a new instruction that provides a way to initiate on remote chains, asset transfers which transfer multiple types (teleports, local-reserve, destination-reserve) of assets, using XCM alone.
The currently existing instructions are too opinionated and force each XCM asset transfer to a single transfer type (teleport, local-reserve, destination-reserve). This results in inability to combine different types of transfers in single transfer which results in overall poor UX when trying to move assets across chains.
XCM is the de-facto cross-chain messaging protocol within the Polkadot ecosystem, and cross-chain assets transfers is one of its main use-cases. Unfortunately, in its current spec, it does not support initiating on a remote chain, one or more transfers that combine assets with different transfer types. @@ -6208,14 +6621,14 @@ For example, allows single XCM program execution to transfer multiple assets fro Kusama Asset Hub, over the bridge through Polkadot Asset Hub with final destination ParaP on Polkadot.
ParaP
With current XCM, we are limited to doing multiple independent transfers for each individual hop in order to move both "interesting" assets, but also "supporting" assets (used to pay fees).
A new instruction InitiateAssetsTransfer is introduced that initiates an assets transfer from the chain it is executed on, to another chain. The executed transfer is point-to-point (chain-to-chain) with all of the transfer properties specified in the instruction parameters. The instruction also @@ -6403,9 +6816,9 @@ by executing a single XCM message, even though we'll be mixing multiple ).unwrap(); }) }
InitiateAssetsTransfer
No drawbacks identified.
There should be no security risks related to the new instruction from the XCVM perspective. It follows the same pattern as with single-type asset transfers, only now it allows combining multiple types at once.
Improves security by enabling @@ -6414,16 +6827,16 @@ which minimizes the potential free/unpaid work that a receiving chain has to do. required execution fee payment, part of the instruction logic through the remote_fees: Option<AssetTransferFilter> parameter, which will make sure the remote XCM starts with a single-asset-holding-loading-instruction, immediately followed by a BuyExecution using said asset.
remote_fees: Option<AssetTransferFilter>
BuyExecution
This brings no impact to the rest of the XCM spec. It is a new, independent instruction, no changes to existing instructions.
Enhances the exposed functionality of Polkadot. Will allow multi-chain transfers that are currently forced to happen in multiple programs per asset per "hop", to be possible in a single XCM program.
No performance changes/implications.
The proposal enhances developers' and users' cross-chain asset transfer capabilities. This enhancement is optimized for XCM programs transferring multiple assets, needing to run their logic across multiple chains.
Does this proposal break compatibility with existing interfaces, older versions of implementations? Summarize necessary migrations or upgrade strategies, if any.
This enhancement is compatible with all existing XCM programs and versions.
The Transact XCM instruction currently forces the user to set a specific maximum weight allowed to the inner call and then also pay for that much weight regardless of how much the call actually needs in practice.
This RFC proposes improving the usability of Transact by removing that parameter and instead get and charge the actual weight of the inner call from its dispatch info on the remote chain.
The UX of using Transact is poor because of having to guess/estimate the require_weight_at_most weight used by the inner call on the target.
require_weight_at_most
We've seen multiple Transact on-chain failures caused by guessing wrong values for this require_weight_at_most even though the rest of the XCM program would have worked.
In practice, this parameter only adds UX overhead with no real practical value. Use cases fall in one of two categories:
We've had multiple OpenGov root/whitelisted_caller proposals initiated by core-devs completely or partially fail because of incorrect configuration of require_weight_at_most parameter. This is a strong indication that the instruction is hard to use.
root/whitelisted_caller
The proposed enhancement is simple: remove require_weight_at_most parameter from the instruction:
- Transact { origin_kind: OriginKind, require_weight_at_most: Weight, call: DoubleEncoded<Call> }, + Transact { origin_kind: OriginKind, call: DoubleEncoded<Call> },
The XCVM implementation shall no longer use require_weight_at_most for weighing. Instead, it shall weigh the Transact instruction by decoding and weighing the inner call.
call
No drawbacks, existing scenarios work as before, while this also allows new/easier flows.
Currently, an XCVM implementation can weigh a message just by looking at the decoded instructions without decoding the Transact's call, but assuming require_weight_at_most weight for it. With the new version it has to decode the inner call to know its actual weight.
But this does not actually change the security considerations, as can be seen below.
With the new Transact the weighing happens after decoding the inner call. The entirety of the XCM program containing this Transact needs to be either covered by enough bought weight using a BuyExecution, or the origin has to be allowed to do free execution.
The security considerations around how much can someone execute for free are the same for both this new version and the old. In both cases, an "attacker" can do the XCM decoding (including Transact inner calls) for free by adding a large enough BuyExecution without actually having the funds available.
In both cases, decoding is done for free, but in both cases execution fails early on BuyExecution.
No performance change.
Ergonomics are slightly improved by simplifying Transact API.
Compatible with previous XCM programs.
Elastic scaling is not resilient against griefing attacks without a way for a PoV (Proof of Validity) to commit to the particular core index it was intended for. This RFC proposes a way to include core index information in the candidate commitments and the CandidateDescriptor data structure in a backward compatible way. Additionally, it proposes the addition of a SessionIndex field in the CandidateDescriptor to make dispute resolution more secure and robust.
CandidateDescriptor
SessionIndex
This RFC proposes a way to solve two different problems:
This approach and alternatives have been considered and discussed in this issue.
The approach proposed below was chosen primarily because it minimizes the number of breaking changes, the complexity and takes less implementation and testing time. The proposal is to change the existing primitives while keeping binary compatibility with the older versions. We repurpose @@ -6736,28 +7149,28 @@ A candidate must not be backed if any of the following are true:
The only drawback is that further additions to the descriptor are limited to the amount of remaining unused space.
Standard testing (unit tests, CI zombienet tests) for functionality and mandatory security audit to ensure the implementation does not introduce any new security issues.
Backward compatibility of the implementation will be tested on testnets (Versi and Westend).
There is no impact on privacy.
Overall performance will be improved by not checking the collator signatures in runtime and nodes. The impact on the UMP queue and candidate receipt processing is negligible.
The ClaimQueueOffset along with the relay parent choice allows parachains to optimize their block production for either throughput or lower XCM message processing latency. A value of 0 with the newest relay parent provides the best latency while picking older relay parents avoids re-orgs.
ClaimQueueOffset
It is mandatory for elastic parachains to switch to the new receipt format and commit to a core by sending the UMPSignal::SelectCore message. It is optional but desired that all parachains switch to the new receipts for providing the session index for disputes.
UMPSignal::SelectCore
The implementation of this RFC itself must not introduce any breaking changes for the parachain runtime or collator nodes.
The proposed changes are not fully backward compatible, because older validators verify the collator signature of candidate descriptors.
Additional care must be taken before enabling the new descriptors by waiting for at least @@ -6782,12 +7195,12 @@ present in the receipt.
Any tooling that decodes UMP XCM messages needs an update to support or ignore the new UMP messages, but they should be fine to decode the regular XCM messages that come before the separator.
Forum discussion about a new CandidateReceipt format: https://forum.polkadot.network/t/pre-rfc-discussion-candidate-receipt-format-v2/3738
The implementation is extensible and future-proof to some extent. With minimal or no breaking changes, additional fields can be added in the candidate descriptor until the reserved space is exhausted
version
XCM already handles execution fees in an effective and efficient manner using the BuyExecution instruction. However, other types of fees are not handled as effectively -- for example, delivery fees. Fees exist that can't be measured using Weight -- as execution fees can -- so a new method should be thought up for those cases. @@ -6838,7 +7251,7 @@ This RFC proposes making the fee handling system simpler and more general, by do
Weight
fees
PayFees
Execution fees are handled correctly by XCM right now. However, the addition of extra fees, like for message delivery, result in awkward ways of integrating them into the XCVM implementation. This is because these types of fees are not included in the language. @@ -6846,14 +7259,14 @@ The standard should have a way to correctly deal with these implementation speci The new instruction moves the specified amount of fees from the holding register to a dedicated fees register that the XCVM can use in flexible ways depending on its implementation. The XCVM implementation is free to use these fees to pay for execution fees, transport fees, or any other type of fee that might be necessary. This moves the specifics of fees further away from the XCM standard, and more into the actual underlying XCVM implementation, which is a good thing.
The new instruction that will replace BuyExecution is a much simpler and general version: PayFees. This instruction takes one Asset, takes it from the holding register, and puts it into a new fees register. The XCVM implementation can now use this Asset to make sure every necessary fee is paid for, this includes execution fees, delivery fees, and any other type of fee @@ -6884,27 +7297,27 @@ BuyExecution { asset, weight_limit } PayFees { asset } // ...rest } -
Asset
There needs to be an explicit change from BuyExecution to PayFees, most often accompanied by a reduction in the assets passed in.
It might become a security concern if leftover fees are trapped, since a lot of them are expected.
There should be no performance downsides to this approach. The fees register is a simplification that may actually result in better performance, in the case an implementation is doing a workaround to achieve what this RFC proposes.
The interface is going to be very similar to the already existing one. Even simpler since PayFees will only receive one asset. That asset will allow users to limit the amount of fees they are willing to pay.
This RFC can't just change the semantics of the BuyExecution instruction since that instruction accepts any funds, uses what it needs and returns the rest immediately. The new proposed instruction, PayFees, doesn't return the leftover immediately, it keeps it in the fees register. In practice, the deprecated BuyExecution needs to be slowly rolled out in favour of PayFees.
The closed RFC PR on the xcm-format repository, before XCM RFCs got moved to fellowship RFCs: https://github.com/polkadot-fellows/xcm-format/pull/53.
This proposal would greatly benefit from an improved asset trapping system.
CustomAssetClaimer is also related, as it directly improves the ergonomics of this proposal.
LeftoverAssetsDestination execution hint would also similarly improve the ergonomics.
A previous XCM RFC (https://github.com/polkadot-fellows/xcm-format/pull/37) introduced a SetAssetClaimer instruction. This idea of instructing the XCVM to change some implementation-specific behavior is useful. In order to generalize this mechanism, this RFC introduces a new instruction SetHints and makes the SetAssetClaimer be just one of many possible execution hints.
SetAssetClaimer
SetHints
There is a need for specifying how certain implementation-specific things should behave. Things like who can claim the assets or what can be done instead of trapping assets. Another idea for a hint:
AssetForFees
LeftoverAssetsDestination
A new instruction, SetHints, will be added. This instruction will take a single parameter of type Hint, an enumeration. The first variant for this enum is AssetClaimer, which allows to specify a location that should be able to claim trapped assets. @@ -6980,27 +7393,27 @@ enum Hint { type NumVariants = /* Number of variants of the `Hint` enum */; } -
Hint
AssetClaimer
The SetHints instruction might be hard to benchmark, since we should look into the actual hints being set to know how much weight to attribute to it.
Hints are specified on a per-message basis, so they have to be specified at the beginning of a message. If they were to be specified at the end, hints like AssetClaimer would be useless if an error occurs beforehand and assets get trapped before ever reaching the hint.
The instruction takes a bounded vector of hints so as to not force barriers to allow an arbitrary number of SetHint instructions.
SetHint
The SetHints instruction provides a better integration with barriers. If we had to add one barrier for SetAssetClaimer and another for each new hint that's added, barriers would need to be changed all the time. Also, this instruction would make it simpler to write XCM programs. You only need to specify the hints you want in one single instruction at the top of your program.
The previous RFC PR in the xcm-format repository before XCM RFCs moved to fellowship RFCs: https://github.com/polkadot-fellows/xcm-format/pull/59.
This RFC aims to remove the NetworkIds of Westend and Rococo, arguing that testnets shouldn't go in the language.
NetworkId
Westend
Rococo
We've already seen the plans to phase out Rococo and Paseo has appeared. Instead of constantly changing the testnets included in the language, we should favor specifying them via their genesis hash, using NetworkId::ByGenesis.
NetworkId::ByGenesis
Remove Westend and Rococo from the included NetworkIds in the language.
This RFC will make it less convenient to specify a testnet, but not by a large amount.
It will very slightly reduce the ergonomics of testnet developers but improve the stability of the language.
NetworkId::Rococo and NetworkId::Westend can just use NetworkId::ByGenesis, as can other testnets.
NetworkId::Rococo
NetworkId::Westend
A previous attempt to add NetworkId::Paseo: https://github.com/polkadot-fellows/xcm-format/pull/58.
NetworkId::Paseo
XCM programs generated by the InitiateAssetTransfer instruction shall have the option to carry over the original origin all the way to the final destination. They shall do so by internally making use of AliasOrigin or ClearOrigin depending on given parameters.
InitiateAssetTransfer
AliasOrigin
ClearOrigin
This allows asset transfers to retain their original origin even across multiple hops.
Ecosystem chains would have to change their trusted aliasing rules to effectively make use of this feature.
Currently, all XCM asset transfer instructions ultimately clear the origin in the remote XCM message by use of the ClearOrigin instruction. This is done for security considerations to ensure that subsequent (user-controlled) instructions cannot command the authority of the sending chain.
The problem with this approach is that it limits what can be achieved on remote chains through XCM. Most XCM operations require having an origin, and following any asset transfer the origin is lost, meaning not much can be done other than depositing the transferred assets to some local account or transferring them onward to another chain.
For example, we cannot transfer some funds for buying execution, then do a Transact (all in the same XCM message).
Transact XCM programs today require a two step process:
And we want to be able to do it using a single XCM program.
Runtime Users, Runtime Devs, wallets, cross-chain dApps.
In the case of XCM programs going from source-chain directly to dest-chain without an intermediary hop, we can enable scenarios such as above by using the AliasOrigin instruction instead of the ClearOrigin instruction.
source-chain
dest-chain
Instead of clearing the source-chain origin, the destination chain shall attempt to alias source-chain to "original origin" on the source chain. Most common such origin aliasing would be X1(Parachain(source-chain)) -> X2(Parachain(source-chain), AccountId32(origin-account)) for the case of a single hop transfer where the initiator is a (signed/pure/proxy) account origin-account on source-chain. @@ -7165,35 +7578,35 @@ involved chains.
X1(Parachain(source-chain))
X2(Parachain(source-chain), AccountId32(origin-account))
origin-account
In terms of ergonomics and user experience, this support for combining an asset transfer with a subsequent action (like Transact) is a net positive.
In terms of performance, and privacy, this is neutral with no changes.
In terms of security, the feature by itself is also neutral because it allows preserve_origin: false usage for operating with no extra trust assumptions. When wanting to support preserving origin, chains need to configure secure origin aliasing filters. The one suggested in this RFC should be the right choice for the majority of chains, but each chain will ultimately choose depending on their business model and logic (e.g. chain does not plan to integrate with Asset Hub). It is up to the individual chains to configure accordingly.
preserve_origin: false
Barriers should now allow AliasOrigin, DescendOrigin or ClearOrigin.
DescendOrigin
Normally, XCM program builders should audit their programs and eliminate assumptions of "no origin" on remote side of this instruction. In this case, the InitiateAssetsTransfer has not been released yet, it will be part of XCMv5, and we can make this change part of the same XCMv5 so that there isn't even the possibility of someone in the wild having built XCM programs using this instruction on those wrong assumptions.
The working assumption going forward is that the origin on the remote side can either be cleared or it can be the local origin's reanchored location. This assumption is in line with the current behavior of remote XCM programs sent over using pallet_xcm::send.
pallet_xcm::send
The existing DepositReserveAsset, InitiateReserveWithdraw and InitiateTeleport cross chain asset transfer instructions will not attempt to do origin aliasing and will always clear origin same as before for compatibility reasons.
DepositReserveAsset
InitiateReserveWithdraw
InitiateTeleport
No impact.
Improves ergonomics by allowing the local origin to operate on the remote chain even when the XCM program includes an asset transfer.
At the executor-level this change is backwards and forwards compatible. Both types of programs can be executed on new and old versions of XCM with no changes in behavior.
New version of the InitiateAssetsTransfer instruction acts same as before when used with preserve_origin: false.
For using the new capabilities, the XCM builder has to verify that the involved chains have the required origin-aliasing filters configured and use some new version of Barriers aware of AliasOrigin as an allowed alternative to ClearOrigin.
For compatibility reasons, this RFC proposes this mechanism be added as an enhancement to the yet unreleased InitiateAssetsTransfer instruction, thus eliminating possibilities of XCM logic breakages in the wild. Following the same logic, the existing DepositReserveAsset, InitiateReserveWithdraw and InitiateTeleport cross chain asset transfer instructions will not attempt to do origin aliasing and will always clear the origin same as before for compatibility reasons.
Any one of DepositReserveAsset, InitiateReserveWithdraw and InitiateTeleport instructions can be replaced with a InitiateAssetsTransfer instruction with or without origin aliasing, thus providing a clean and clear upgrade path for opting-in this new feature.
I AuthorsJeff Burdges, ... -Summary +Summary An off-chain approximation protocol should assign rewards based upon the approvals and availability work done by validators. All validators track which approval votes they actually use, reporting the aggregate, after which an on-chain median computation gives a good approximation under byzantine assumptions. Approval checkers report aggregate information about which availability chunks they use too, but in availability we need a tit-for-tat game to enforce honesty, because approval committees could often bias results thanks to their small size. -Motivation +Motivation We want all polkadot subsystems be profitable for validataors, because otherwise operators might profit from running modified code. In particular, almost all rewards in Kusama/Polkadot should come from work done securing parachains, primarily approval checking, but also backing, availability, and support of XCMP. Among these task, our highest priorities must be approval checks, which ensure soundness, and sending availability chunks to approval checkers. We prove backers must be paid strictly less than approval checkers. At present though, validators' rewards have relatively little relationship to validators operating costs, in terms of bandwidth and CPU time. Worse, polkadot's scaling makes us particular vulnerable "no-shows" caused by validators skipping their approval checks. We're particularly concernned about hardware specks impact upon the number of parachain cores. We've requested relatively low spec machines so far, only four physical CPU cores, although some run even lower specs like only two physical CPU cores. Alone, rewards cannot fix our low speced validator problem, but rewards and outreach together should far more impact than either alone. In future, we'll further increase validator spec requirements, which directly improve polkadot's throughput, and which repeats this dynamic of purging underspeced nodes, except outreach becomes more important because de facto too many slow validators can "out vote" the faster ones -Stakeholders +Stakeholders We alter the validators rewards protocol, but with negligable impact upon rewards for honest validators who comply with hardware and bandwidth recommendations. We shall still reward participation in relay chain concensus of course, which de facto means block production but not finality, but these current reward levels shall wind up greatly reduced. Any validators who manipulate block rewards now could lose rewards here, simply because of rewards being shifted from block production to availability, but this sounds desirable. We've discussed roughly this rewards protocol in https://hackmd.io/@rgbPIkIdTwSICPuAq67Jbw/S1fHcvXSF and https://github.com/paritytech/polkadot-sdk/issues/1811 as well as related topics like https://github.com/paritytech/polkadot-sdk/issues/5122 @@ -7333,7 +7746,7 @@ for (mmu,atm) in my_missing_uploads.iter_mut().zip(approvals_tally_messages) { We distribute rewards on-chain using approval_usages_medians and reweighted_total_used_downloads. Approval checkers could later change from who they download chunks using my_missing_uploads. Strategies In theory, validators could adopt whatever strategy they like to penalize validators who stiff them on availability redistribution rewards, except they should not stiff back, only choose other availability providers. We discuss one good strategy below, but initially this could go unimplemented. -Explanation +Explanation Backing Polkadot's efficency creates subtle liveness concerns: Anytime one node cannot perform one of its approval checks then Polkadot loses in expectation 3.25 approval checks, or 0.10833 parablocks. This makes back pressure essential. We cannot throttle approval checks securely either, so reactive off-chain back pressure only makes sense during or before the backing phase. In other words, if nodes feel overworked themselves, or perhaps beleive others to be, then they should drop backing checks, never approval checks. It follows backing work must be rewarded less well and less reliably than approvals, as otherwise validators could benefit from behavior that harms the network. @@ -7384,7 +7797,7 @@ At this point, we compute $\beta\prime_w = \sum_v \beta\prime_{w,v}$ on-chain fo We discuss approvals being considered by the tit-for-tat in earlier drafts. An adversary who successfuly manipulates the rewards median votes would've alraedy violated polkadot's security assumptions though, which requires a hard fork and correcting the dot allocation. Incorrect report wrong approval_usages remain interesting statistics though. Adversarial validators could manipulates their availability votes though, even without being a supermajority. If they still download honestly, then this costs them more rewards than they earn. We do not prevent validators from preferentially obtaining their pieces from their friends though. We should analyze, or at least observe, the long-term consequences. A priori, whale nominator's validators could stiff validators but then rotate their validators quickly enough so that they never suffered being skipped back. We discuss several possible solution, and their difficulties, under "Rob's nominator-wise skipping" in https://hackmd.io/@rgbPIkIdTwSICPuAq67Jbw/S1fHcvXSF but overall less seems like more here. Also frequent validator rotation could be penalized elsewhere. -Performance, Ergonomics, and Compatibility +Performance, Ergonomics, and Compatibility We operate off-chain except for final rewards votes and median tallies. We expect lower overhead rewards protocols would lack information, thereby admitting easier cheating. Initially, we designed the ELVES approval gadget to allow on-chain operation, in part for rewards computation, but doing so looks expensive. Also, on-chain rewards computaiton remains only an approximation too, but could even be biased more easily than our off-chain protocol presented here. @@ -7392,11 +7805,11 @@ At this point, we compute $\beta\prime_w = \sum_v \beta\prime_{w,v}$ on-chain fo We alraedy teach validators about missed parachain blocks, but we'll teach approval checking more going forwards, because current efforts focus more upon backing. JAM's block exports should not complicate availability rewards, but could impact some alternative schemes. -Prior Art and References +Prior Art and References None -Unresolved Questions +Unresolved Questions Provide specific questions to discuss and address before the RFC is voted on by the Fellowship. This should include, for example, alternatives to aspects of the proposed design where the appropriate trade-off to make is unclear. -Future Directions and Related Material +Future Directions and Related Material Synthetic parachain flag Any rewards protocol could simply be "out voted" by too many slow validators: An increase the number of parachain cores increases more workload, but this creates no-shows if too few validators could handle this workload. We could add a synthetic parachain flag, only settable by governance, which treats no-shows as positive approval votes for that parachain, but without adding rewards. We should never enable this for real parachains, only for synthetic ones like gluttons. We should not enable the synthetic parachain flag long-term even for gluttonsm, because validators could easily modify their code. Yet, synthetic approval checks might enable pushing the hardware upgrades more agressively over the short-term. @@ -7428,16 +7841,16 @@ At this point, we compute $\beta\prime_w = \sum_v \beta\prime_{w,v}$ on-chain fo AuthorsPierre Krieger -Summary +Summary Update the runtime-host interface to no longer make use of a host-side allocator. -Motivation +Motivation The heap allocation of the runtime is currently controlled by the host using a memory allocator on the host side. The API of many host functions consists in allocating a buffer. For example, when calling ext_hashing_twox_256_version_1, the host allocates a 32 bytes buffer using the host allocator, and returns a pointer to this buffer to the runtime. The runtime later has to call ext_allocator_free_version_1 on this pointer in order to free the buffer. Even though no benchmark has been done, it is pretty obvious that this design is very inefficient. To continue with the example of ext_hashing_twox_256_version_1, it would be more efficient to instead write the output hash to a buffer that was allocated by the runtime on its stack and passed by pointer to the function. Allocating a buffer on the stack in the worst case scenario simply consists in decreasing a number, and in the best case scenario is free. Doing so would save many Wasm memory reads and writes by the allocator, and would save a function call to ext_allocator_free_version_1. Furthermore, the existence of the host-side allocator has become questionable over time. It is implemented in a very naive way, and for determinism and backwards compatibility reasons it needs to be implemented exactly identically in every client implementation. Runtimes make substantial use of heap memory allocations, and each allocation needs to go twice through the runtime <-> host boundary (once for allocating and once for freeing). Moving the allocator to the runtime side, while it would increase the size of the runtime, would be a good idea. But before the host-side allocator can be deprecated, all the host functions that make use of it need to be updated to not use it. -Stakeholders +Stakeholders No attempt was made at convincing stakeholders. -Explanation +Explanation New host functions This section contains a list of new host functions to introduce. (func $ext_storage_read_version_2 @@ -7640,11 +8053,11 @@ The following other host functions are similarly also considered deprecated: ext_allocator_free_version_1 ext_offchain_network_state_version_1
An off-chain approximation protocol should assign rewards based upon the approvals and availability work done by validators.
All validators track which approval votes they actually use, reporting the aggregate, after which an on-chain median computation gives a good approximation under byzantine assumptions. Approval checkers report aggregate information about which availability chunks they use too, but in availability we need a tit-for-tat game to enforce honesty, because approval committees could often bias results thanks to their small size.
We want all polkadot subsystems be profitable for validataors, because otherwise operators might profit from running modified code. In particular, almost all rewards in Kusama/Polkadot should come from work done securing parachains, primarily approval checking, but also backing, availability, and support of XCMP.
Among these task, our highest priorities must be approval checks, which ensure soundness, and sending availability chunks to approval checkers. We prove backers must be paid strictly less than approval checkers.
At present though, validators' rewards have relatively little relationship to validators operating costs, in terms of bandwidth and CPU time. Worse, polkadot's scaling makes us particular vulnerable "no-shows" caused by validators skipping their approval checks.
We're particularly concernned about hardware specks impact upon the number of parachain cores. We've requested relatively low spec machines so far, only four physical CPU cores, although some run even lower specs like only two physical CPU cores. Alone, rewards cannot fix our low speced validator problem, but rewards and outreach together should far more impact than either alone.
In future, we'll further increase validator spec requirements, which directly improve polkadot's throughput, and which repeats this dynamic of purging underspeced nodes, except outreach becomes more important because de facto too many slow validators can "out vote" the faster ones
We alter the validators rewards protocol, but with negligable impact upon rewards for honest validators who comply with hardware and bandwidth recommendations.
We shall still reward participation in relay chain concensus of course, which de facto means block production but not finality, but these current reward levels shall wind up greatly reduced. Any validators who manipulate block rewards now could lose rewards here, simply because of rewards being shifted from block production to availability, but this sounds desirable.
We've discussed roughly this rewards protocol in https://hackmd.io/@rgbPIkIdTwSICPuAq67Jbw/S1fHcvXSF and https://github.com/paritytech/polkadot-sdk/issues/1811 as well as related topics like https://github.com/paritytech/polkadot-sdk/issues/5122
We distribute rewards on-chain using approval_usages_medians and reweighted_total_used_downloads. Approval checkers could later change from who they download chunks using my_missing_uploads.
approval_usages_medians
reweighted_total_used_downloads
my_missing_uploads
In theory, validators could adopt whatever strategy they like to penalize validators who stiff them on availability redistribution rewards, except they should not stiff back, only choose other availability providers. We discuss one good strategy below, but initially this could go unimplemented.
Polkadot's efficency creates subtle liveness concerns: Anytime one node cannot perform one of its approval checks then Polkadot loses in expectation 3.25 approval checks, or 0.10833 parablocks. This makes back pressure essential.
We cannot throttle approval checks securely either, so reactive off-chain back pressure only makes sense during or before the backing phase. In other words, if nodes feel overworked themselves, or perhaps beleive others to be, then they should drop backing checks, never approval checks. It follows backing work must be rewarded less well and less reliably than approvals, as otherwise validators could benefit from behavior that harms the network.
We discuss approvals being considered by the tit-for-tat in earlier drafts. An adversary who successfuly manipulates the rewards median votes would've alraedy violated polkadot's security assumptions though, which requires a hard fork and correcting the dot allocation. Incorrect report wrong approval_usages remain interesting statistics though.
approval_usages
Adversarial validators could manipulates their availability votes though, even without being a supermajority. If they still download honestly, then this costs them more rewards than they earn. We do not prevent validators from preferentially obtaining their pieces from their friends though. We should analyze, or at least observe, the long-term consequences.
A priori, whale nominator's validators could stiff validators but then rotate their validators quickly enough so that they never suffered being skipped back. We discuss several possible solution, and their difficulties, under "Rob's nominator-wise skipping" in https://hackmd.io/@rgbPIkIdTwSICPuAq67Jbw/S1fHcvXSF but overall less seems like more here. Also frequent validator rotation could be penalized elsewhere.
We operate off-chain except for final rewards votes and median tallies. We expect lower overhead rewards protocols would lack information, thereby admitting easier cheating.
Initially, we designed the ELVES approval gadget to allow on-chain operation, in part for rewards computation, but doing so looks expensive. Also, on-chain rewards computaiton remains only an approximation too, but could even be biased more easily than our off-chain protocol presented here.
We alraedy teach validators about missed parachain blocks, but we'll teach approval checking more going forwards, because current efforts focus more upon backing.
JAM's block exports should not complicate availability rewards, but could impact some alternative schemes.
Provide specific questions to discuss and address before the RFC is voted on by the Fellowship. This should include, for example, alternatives to aspects of the proposed design where the appropriate trade-off to make is unclear.
Any rewards protocol could simply be "out voted" by too many slow validators: An increase the number of parachain cores increases more workload, but this creates no-shows if too few validators could handle this workload.
We could add a synthetic parachain flag, only settable by governance, which treats no-shows as positive approval votes for that parachain, but without adding rewards. We should never enable this for real parachains, only for synthetic ones like gluttons. We should not enable the synthetic parachain flag long-term even for gluttonsm, because validators could easily modify their code. Yet, synthetic approval checks might enable pushing the hardware upgrades more agressively over the short-term.
Update the runtime-host interface to no longer make use of a host-side allocator.
The heap allocation of the runtime is currently controlled by the host using a memory allocator on the host side.
The API of many host functions consists in allocating a buffer. For example, when calling ext_hashing_twox_256_version_1, the host allocates a 32 bytes buffer using the host allocator, and returns a pointer to this buffer to the runtime. The runtime later has to call ext_allocator_free_version_1 on this pointer in order to free the buffer.
ext_hashing_twox_256_version_1
ext_allocator_free_version_1
Even though no benchmark has been done, it is pretty obvious that this design is very inefficient. To continue with the example of ext_hashing_twox_256_version_1, it would be more efficient to instead write the output hash to a buffer that was allocated by the runtime on its stack and passed by pointer to the function. Allocating a buffer on the stack in the worst case scenario simply consists in decreasing a number, and in the best case scenario is free. Doing so would save many Wasm memory reads and writes by the allocator, and would save a function call to ext_allocator_free_version_1.
Furthermore, the existence of the host-side allocator has become questionable over time. It is implemented in a very naive way, and for determinism and backwards compatibility reasons it needs to be implemented exactly identically in every client implementation. Runtimes make substantial use of heap memory allocations, and each allocation needs to go twice through the runtime <-> host boundary (once for allocating and once for freeing). Moving the allocator to the runtime side, while it would increase the size of the runtime, would be a good idea. But before the host-side allocator can be deprecated, all the host functions that make use of it need to be updated to not use it.
No attempt was made at convincing stakeholders.
This section contains a list of new host functions to introduce.
(func $ext_storage_read_version_2 @@ -7640,11 +8053,11 @@ The following other host functions are similarly also considered deprecated: ext_allocator_free_version_1 ext_offchain_network_state_version_1
ext_offchain_network_state_version_1
This RFC might be difficult to implement in Substrate due to the internal code design. It is not clear to the author of this RFC how difficult it would be.
The API of these new functions was heavily inspired by API used by the C programming language.
The changes in this RFC would need to be benchmarked. This involves implementing the RFC and measuring the speed difference.
It is expected that most host functions are faster or equal speed to their deprecated counterparts, with the following exceptions:
This RFC proposes a dynamic pricing model for the sale of Bulk Coretime on the Polkadot UC. The proposed model updates the regular price of cores for each sale period, by taking into account the number of cores sold in the previous sale, as well as a limit of cores and a target number of cores sold. It ensures a minimum price and limits price growth to a maximum price increase factor, while also giving govenance control over the steepness of the price change curve. It allows governance to address challenges arising from changing market conditions and should offer predictable and controlled price adjustments.
Accompanying visualizations are provided at [1].
RFC-1 proposes periodic Bulk Coretime Sales as a mechanism to sell continouos regions of blockspace (suggested to be 4 weeks in length). A number of Blockspace Regions (compare RFC-1 & RFC-3) are provided for sale to the Broker-Chain each period and shall be sold in a way that provides value-capture for the Polkadot network. The exact pricing mechanism is out of scope for RFC-1 and shall be provided by this RFC.
A dynamic pricing model is needed. A limited number of Regions are offered for sale each period. The model needs to find the price for a period based on supply and demand of the previous period.
The model shall give Coretime consumers predictability about upcoming price developments and confidence that Polkadot governance can adapt the pricing model to changing market conditions.
The primary stakeholders of this RFC are:
The dynamic pricing model sets the new price based on supply and demand in the previous period. The model is a function of the number of Regions sold, piecewise-defined by two power functions.
This pricing model is based on the requirements from the basic linear solution proposed in RFC-1, which is a simple dynamic pricing model and only used as proof. The present model adds additional considerations to make the model more adaptable under real conditions.
This RFC, if accepted, shall be implemented in conjunction with RFC-1.
Improve the networking messages that query storage items from the remote, in order to reduce the bandwidth usage and number of round trips of light clients.
Clients on the Polkadot peer-to-peer network can be divided into two categories: full nodes and light clients. So-called full nodes are nodes that store the content of the chain locally on their disk, while light clients are nodes that don't. In order to access for example the balance of an account, a full node can do a disk read, while a light client needs to send a network message to a full node and wait for the full node to reply with the desired value. This reply is in the form of a Merkle proof, which makes it possible for the light client to verify the exactness of the value.
Unfortunately, this network protocol is suffering from some issues:
Once Polkadot and Kusama will have transitioned to state_version = 1, which modifies the format of the trie entries, it will be possible to generate Merkle proofs that contain only the hashes of values in the storage. Thanks to this, it is already possible to prove the existence of a key without sending its entire value (only its hash), or to prove that a value has changed or not between two blocks (by sending just their hashes). Thus, the only reason why aforementioned issues exist is because the existing networking messages don't give the possibility for the querier to query this. This is what this proposal aims at fixing.
state_version = 1
This is the continuation of https://github.com/w3f/PPPs/pull/10, which itself is the continuation of https://github.com/w3f/PPPs/pull/5.
The protobuf schema of the networking protocol can be found here: https://github.com/paritytech/substrate/blob/5b6519a7ff4a2d3cc424d78bc4830688f3b184c0/client/network/light/src/schema/light.v1.proto
The proposal is to modify this protocol in this way:
@@ -11,6 +11,7 @@ message Request { @@ -7936,26 +8349,26 @@ An alternative could have been to specify the child_trie_info for e Also note that child tries aren't considered as descendants of the main trie when it comes to the includeDescendants flag. In other words, if the request concerns the main trie, no content coming from child tries is ever sent back. This protocol keeps the same maximum response size limit as currently exists (16 MiB). It is not possible for the querier to know in advance whether its query will lead to a reply that exceeds the maximum size. If the reply is too large, the replier should send back only a limited number (but at least one) of requested items in the proof. The querier should then send additional requests for the rest of the items. A response containing none of the requested items is invalid. The server is allowed to silently discard some keys of the request if it judges that the number of requested keys is too high. This is in line with the fact that the server might truncate the response. -Drawbacks +Drawbacks This proposal doesn't handle one specific situation: what if a proof containing a single specific item would exceed the response size limit? For example, if the response size limit was 1 MiB, querying the runtime code (which is typically 1.0 to 1.5 MiB) would be impossible as it's impossible to generate a proof less than 1 MiB. The response size limit is currently 16 MiB, meaning that no single storage item must exceed 16 MiB. Unfortunately, because it's impossible to verify a Merkle proof before having received it entirely, parsing the proof in a streaming way is also not possible. A way to solve this issue would be to Merkle-ize large storage items, so that a proof could include only a portion of a large storage item. Since this would require a change to the trie format, it is not realistically feasible in a short time frame. -Testing, Security, and Privacy +Testing, Security, and Privacy The main security consideration concerns the size of replies and the resources necessary to generate them. It is for example easily possible to ask for all keys and values of the chain, which would take a very long time to generate. Since responses to this networking protocol have a maximum size, the replier should truncate proofs that would lead to the response being too large. Note that it is already possible to send a query that would lead to a very large reply with the existing network protocol. The only thing that this proposal changes is that it would make it less complicated to perform such an attack. Implementers of the replier side should be careful to detect early on when a reply would exceed the maximum reply size, rather than inconditionally generate a reply, as this could take a very large amount of CPU, disk I/O, and memory. Existing implementations might currently be accidentally protected from such an attack thanks to the fact that requests have a maximum size, and thus that the list of keys in the query was bounded. After this proposal, this accidental protection would no longer exist. Malicious server nodes might truncate Merkle proofs even when they don't strictly need to, and it is not possible for the client to (easily) detect this situation. However, malicious server nodes can already do undesirable things such as throttle down their upload bandwidth or simply not respond. There is no need to handle unnecessarily truncated Merkle proofs any differently than a server simply not answering the request. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance It is unclear to the author of the RFC what the performance implications are. Servers are supposed to have limits to the amount of resources they use to respond to requests, and as such the worst that can happen is that light client requests become a bit slower than they currently are. -Ergonomics +Ergonomics Irrelevant. -Compatibility +Compatibility The prior networking protocol is maintained for now. The older version of this protocol could get removed in a long time. -Prior Art and References +Prior Art and References None. This RFC is a clean-up of an existing mechanism. -Unresolved Questions +Unresolved Questions None -Future Directions and Related Material +Future Directions and Related Material The current networking protocol could be deprecated in a long time. Additionally, the current "state requests" protocol (used for warp syncing) could also be deprecated in favor of this one. (source) Table of Contents @@ -7985,9 +8398,9 @@ Also note that child tries aren't considered as descendants of the main trie whe AuthorsJonas Gehrlein -Summary +Summary This document is a proposal for restructuring the bulk markets in the Polkadot UC's coretime allocation system to improve efficiency and fairness. The proposal suggests separating the BULK_PERIOD into MARKET_PERIOD and RENEWAL_PERIOD, allowing for a market-driven price discovery through a clearing price Dutch auction during the MARKET_PERIOD followed by renewal offers at the MARKET_PRICE during the RENEWAL_PERIOD. The new system ensures synchronicity between renewal and market prices, fairness among all current tenants, and efficient price discovery, while preserving price caps to provide security for current tenants. It seeks to start a discussion about the possibility of long-term leases. -Motivation +Motivation While the initial RFC-1 has provided a robust framework for Coretime allocation within the Polkadot UC, this proposal builds upon its strengths and uses many provided building blocks to address some areas that could be further improved. In particular, this proposal introduces the following changes: @@ -8007,14 +8420,14 @@ Also note that child tries aren't considered as descendants of the main trie whe The premise of this proposal is to reduce complexity by introducing a common price (that develops releative to capacity consumption of Polkadot UC), while still allowing for market forces to add efficiency. Longterm lease owners still receive priority IF they can pay (close to) the market price. This prevents a situation where the renewal price significantly diverges from renewal prices which allows for core captures. While maximum price increase certainty might seem contradictory to efficient price discovery, the proposed model aims to balance these elements, utilizing market forces to determine the price and allocate cores effectively within certain bounds. It must be stated, that potential price increases remain predictable (in the worst-case) but could be higher than in the originally proposed design. The argument remains, however, that we need to allow market forces to affect all prices for an efficient Coretime pricing and allocation. Ultimately, this the framework proposed here adheres to all requirements stated in RFC-1. -Stakeholders +Stakeholders Primary stakeholder sets are: Protocol researchers and developers, largely represented by the Polkadot Fellowship and Parity Technologies' Engineering division. Polkadot Parachain teams both present and future, and their users. Polkadot DOT token holders. -Explanation +Explanation Bulk Markets The BULK_PERIOD has been restructured into two primary segments: the MARKET_PERIOD and RENEWAL_PERIOD, along with an auxiliary SETTLEMENT_PERIOD. This latter period doesn't necessitate any actions from the coretime system chain, but it facilitates a more efficient allocation of coretime in secondary markets. A significant departure from the original proposal lies in the timing of renewals, which now occur post-market phase. This adjustment aims to harmonize renewal prices with their market counterparts, ensuring a more consistent and equitable pricing model. Market Period (14 days) @@ -8061,12 +8474,12 @@ Also note that child tries aren't considered as descendants of the main trie whe Long-term Coretime: The Polkadot UC is undergoing a transition from two-year leases without an instantaneous market to a model encompassing instantaneous and one-month leases. This shift seems to pivot from one extreme to another. While the introduction of short-term leases, both instantaneous and for one month, is a constructive move to lower barriers to entry and promote experimentation, it seems to be the case that established projects might benefit from more extended lease options. We could consider offering another product, such as a six-month Coretime lease, using the same mechanism described herein. Although the majority of leases would still be sold on a one-month basis, the addition of this option would enhance market efficiency as it would strengthen the impact of a secondary market. -Drawbacks +Drawbacks There are trade-offs that arise from this proposal, compared to the initial model. The most notable one is that here, I prioritize requirement 6 over requirement 2. The price, in the very "worst-case" (meaning a huge explosion in demand for coretime) could lead to a much larger increase of prices in Coretime. From an economic perspective, this (rare edgecase) would also mean that we'd vastly underprice Coretime in the original model, leading to highly inefficient allocations. -Prior Art and References +Prior Art and References This RFC builds extensively on the available ideas put forward in RFC-1. Additionally, I want to express a special thanks to Samuel Haefner and Shahar Dobzinski for fruitful discussions and helping me structure my thoughts. -Unresolved Questions +Unresolved Questions The technical feasability needs to be assessed. (source) Table of Contents @@ -8098,16 +8511,16 @@ Also note that child tries aren't considered as descendants of the main trie whe AuthorsGabriel Facco de Arruda -Summary +Summary This RFC proposes changes that enable the use of absolute locations in AccountId derivations, which allows protocols built using XCM to have static account derivations in any runtime, regardless of its position in the family hierarchy. -Motivation +Motivation These changes would allow protocol builders to leverage absolute locations to maintain the exact same derived account address across all networks in the ecosystem, thus enhancing user experience. One such protocol, that is the original motivation for this proposal, is InvArch's Saturn Multisig, which gives users a unifying multisig and DAO experience across all XCM connected chains. -Stakeholders +Stakeholders Ecosystem developers -Explanation +Explanation This proposal aims to make it possible to derive accounts for absolute locations, enabling protocols that require the ability to maintain the same derived account in any runtime. This is done by deriving accounts from the hash of described absolute locations, which are static across different destinations. The same location can be represented in relative form and absolute form like so: #![allow(unused)] @@ -8164,25 +8577,25 @@ Also note that child tries aren't considered as descendants of the main trie whe DescribeFamily The DescribeFamily location descriptor is part of the HashedDescription MultiLocation hashing system and exists to describe locations in an easy format for encoding and hashing, so that an AccountId can be derived from this MultiLocation. This implementation contains a match statement that does not match against absolute locations, so changes to it involve matching against absolute locations and providing appropriate descriptions for hashing. -Drawbacks +Drawbacks No drawbacks have been identified with this proposal. -Testing, Security, and Privacy +Testing, Security, and Privacy Tests can be done using simple unit tests, as this is not a change to XCM itself but rather to types defined in xcm-builder. Security considerations should be taken with the implementation to make sure no unwanted behavior is introduced. This proposal does not introduce any privacy considerations. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance Depending on the final implementation, this proposal should not introduce much overhead to performance. -Ergonomics +Ergonomics The ergonomics of this proposal depend on the final implementation details. -Compatibility +Compatibility Backwards compatibility should remain unchanged, although that depend on the final implementation. -Prior Art and References +Prior Art and References DescirbeFamily type: https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/location_conversion.rs#L122 WithComputedOrigin type: https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/barriers.rs#L153 -Unresolved Questions +Unresolved Questions Implementation details and overall code is still up to discussion. (source) Table of Contents @@ -8214,7 +8627,7 @@ Also note that child tries aren't considered as descendants of the main trie whe ChaosDAO -Summary +Summary This RFC proposes to make modifications to voting power delegations as part of the Conviction Voting pallet. The changes being proposed include: Allow a Delegator to vote independently of their Delegate if they so desire. @@ -8222,7 +8635,7 @@ Also note that child tries aren't considered as descendants of the main trie whe Make a change so that when a delegate votes abstain their delegated votes also vote abstain. Allow a Delegator to delegate/ undelegate their votes for all tracks with a single call. -Motivation +Motivation It has become clear since the launch of OpenGov that there are a few common tropes which pop up time and time again: The frequency of referenda is often too high for network participants to have sufficient time to review, comprehend, and ultimately vote on each individual referendum. This means that these network participants end up being inactive in on-chain governance. @@ -8230,13 +8643,13 @@ Also note that child tries aren't considered as descendants of the main trie whe Delegating votes for all tracks currently requires long batched calls which result in high fees for the Delegator - resulting in a reluctance from many to delegate their votes. We believe (based on feedback from token holders with a larger stake in the network) that if there were some changes made to delegation mechanics, these larger stake holders would be more likely to delegate their voting power to active network participants – thus greatly increasing the support turnout. -Stakeholders +Stakeholders The primary stakeholders of this RFC are: The Polkadot Technical Fellowship who will have to research and implement the technical aspects of this RFC DOT token holders in general -Explanation +Explanation This RFC proposes to make 4 changes to the convictionVoting pallet logic in order to improve the user experience of those delegating their voting power to another account. @@ -8252,21 +8665,21 @@ Also note that child tries aren't considered as descendants of the main trie whe Allow a Delegator to delegate/ undelegate their votes for all tracks with a single call - in order to delegate votes across all tracks, a user must batch 15 calls - resulting in high costs for delegation. A single call for delegate_all/ undelegate_all would reduce the complexity and therefore costs of delegations considerably for prospective Delegators. -Drawbacks +Drawbacks We do not foresee any drawbacks by implementing these changes. If anything we believe that this should help to increase overall voter turnout (via the means of delegation) which we see as a net positive. -Testing, Security, and Privacy +Testing, Security, and Privacy We feel that the Polkadot Technical Fellowship would be the most competent collective to identify the testing requirements for the ideas presented in this RFC. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance This change may add extra chain storage requirements on Polkadot, especially with respect to nested delegations. Ergonomics & Compatibility The change to add nested delegations may affect governance interfaces such as Nova Wallet who will have to apply changes to their indexers to support nested delegations. It may also affect the Polkadot Delegation Dashboard as well as Polkassembly & SubSquare. We want to highlight the importance for ecosystem builders to create a mechanism for indexers and wallets to be able to understand that changes have occurred such as increasing the pallet version, etc. -Prior Art and References +Prior Art and References N/A -Unresolved Questions +Unresolved Questions N/A -Future Directions and Related Material +Future Directions and Related Material Additionally we would like to re-open the conversation about the potential for there to be free delegations. This was discussed by Dr Gavin Wood at Sub0 2022 and we feel like this would go a great way towards increasing the amount of network participants that are delegating: https://youtu.be/hSoSA6laK3Q?t=526 Overall, we strongly feel that delegations are a great way to increase voter turnout, and the ideas presented in this RFC would hopefully help in that aspect. (source) @@ -8308,9 +8721,9 @@ Also note that child tries aren't considered as descendants of the main trie whe AuthorsSergej Sakac -Summary +Summary This RFC proposes a new model for a sustainable on-demand parachain registration, involving a smaller initial deposit and periodic rent payments. The new model considers that on-demand chains may be unregistered and later re-registered. The proposed solution also ensures a quick startup for on-demand chains on Polkadot in such cases. -Motivation +Motivation With the support of on-demand parachains on Polkadot, there is a need to explore a new, more cost-effective model for registering validation code. In the current model, the parachain manager is responsible for reserving a unique ParaId and covering the cost of storing the validation code of the parachain. These costs can escalate, particularly if the validation code is large. We need a better, sustainable model for registering on-demand parachains on Polkadot to help smaller teams deploy more easily. This RFC suggests a new payment model to create a more financially viable approach to on-demand parachain registration. In this model, a lower initial deposit is required, followed by recurring payments upon parachain registration. This new model will coexist with the existing one-time deposit payment model, offering teams seeking to deploy on-demand parachains on Polkadot a more cost-effective alternative. @@ -8324,11 +8737,11 @@ Also note that child tries aren't considered as descendants of the main trie whe The solution MUST allow anyone to pay the rent. The solution MUST prevent the removal of validation code if it could still be required for disputes or approval checking. -Stakeholders +Stakeholders Future Polkadot on-demand Parachains -Explanation +Explanation This RFC proposes a set of changes that will enable the new rent based approach to registering and storing validation code on-chain. The new model, compared to the current one, will require periodic rent payments. The parachain won't be pruned automatically if the rent is not paid, but by permitting anyone to prune the parachain and rewarding the caller, there will be an incentive for the removal of the validation code. On-demand parachains should still be able to utilize the current one-time payment model. However, given the size of the deposit required, it's highly likely that most on-demand parachains will opt for the new rent-based model. @@ -8435,27 +8848,27 @@ pub(super) type CheckedCodeHash<T: Config> = StorageMap<_, Twox64Concat, ParaId, ValidationCodeHash>; } To enable parachain re-registration, we should introduce a new extrinsic in the paras-registrar pallet that allows this. The logic of this extrinsic will be same as regular registration, with the distinction that it can be called by anyone, and the required deposit will be smaller since it only has to cover for the storage of the validation code. -Drawbacks +Drawbacks This RFC does not alter the process of reserving a ParaId, and therefore, it does not propose reducing it, even though such a reduction could be beneficial. Even though this RFC doesn't delve into the specifics of the configuration values for parachain registration but rather focuses on the mechanism, configuring it carelessly could lead to potential problems. Since the validation code hash and head data are not removed when the parachain is pruned but only when the deregister extrinsic is called, the T::DataDepositPerByte must be set to a higher value to create a strong enough incentive for removing it from the state. -Testing, Security, and Privacy +Testing, Security, and Privacy The implementation of this RFC will be tested on Rococo first. Proper research should be conducted on setting the configuration values of the new system since these values can have great impact on the network. An audit is required to ensure the implementation's correctness. The proposal introduces no new privacy concerns. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance This RFC should not introduce any performance impact. -Ergonomics +Ergonomics This RFC does not affect the current parachains, nor the parachains that intend to use the one-time payment model for parachain registration. -Compatibility +Compatibility This RFC does not break compatibility. -Prior Art and References +Prior Art and References Prior discussion on this topic: https://github.com/paritytech/polkadot-sdk/issues/1796 -Unresolved Questions +Unresolved Questions None at this time. -Future Directions and Related Material +Future Directions and Related Material As noted in this GitHub issue, we want to raise the per-byte cost of on-chain data storage. However, a substantial increase in this cost would make it highly impractical for on-demand parachains to register on Polkadot. This RFC offers an alternative solution for on-demand parachains, ensuring that the per-byte cost increase doesn't overly burden the registration process. (source) @@ -8489,16 +8902,16 @@ This RFC offers an alternative solution for on-demand parachains, ensuring that AuthorsPierre Krieger -Summary +Summary Rather than enforce a limit to the total memory consumption on the client side by loading the value at :heappages, enforce that limit on the runtime side. -Motivation +Motivation From the early days of Substrate up until recently, the runtime was present in two forms: the wasm runtime (wasm bytecode passed through an interpreter) and the native runtime (native code directly run by the client). Since the wasm runtime has a lower amount of available memory (4 GiB maximum) compared to the native runtime, and in order to ensure sure that the wasm and native runtimes always produce the same outcome, it was necessary to clamp the amount of memory available to both runtimes to the same value. In order to achieve this, a special storage key (a "well-known" key) :heappages was introduced and represents the number of "wasm pages" (one page equals 64kiB) of memory that are available to the memory allocator of the runtimes. If this storage key is absent, it defaults to 2048, which is 128 MiB. The native runtime has since then been disappeared, but the concept of "heap pages" still exists. This RFC proposes a simplification to the design of Polkadot by removing the concept of "heap pages" as is currently known, and proposes alternative ways to achieve the goal of limiting the amount of memory available. -Stakeholders +Stakeholders Client implementers and low-level runtime developers. -Explanation +Explanation This RFC proposes the following changes to the client: The client no longer considers :heappages as special. @@ -8524,27 +8937,27 @@ This RFC offers an alternative solution for on-demand parachains, ensuring that Each parachain can choose the option that they prefer, but the author of this RFC strongly suggests either option C or B. -Drawbacks +Drawbacks In case of path A, there is one situation where the behaviour pre-RFC is not equivalent to the one post-RFC: when a host function that performs an allocation (for example ext_storage_get) is called, without this RFC this allocation might fail due to reaching the maximum heap pages, while after this RFC this will always succeed. This is most likely not a problem, as storage values aren't supposed to be larger than a few megabytes at the very maximum. In the unfortunate event where the runtime runs out of memory, path B would make it more difficult to relax the memory limit, as we would need to re-upload the entire Wasm, compared to updating only :heappages in path A or before this RFC. In the case where the runtime runs out of memory only in the specific event where the Wasm runtime is modified, this could brick the chain. However, this situation is no different than the thousands of other ways that a bug in the runtime can brick a chain, and there's no reason to be particularily worried about this situation in particular. -Testing, Security, and Privacy +Testing, Security, and Privacy This RFC would reduce the chance of a consensus issue between clients. The :heappages are a rather obscure feature, and it is not clear what happens in some corner cases such as the value being too large (error? clamp?) or malformed. This RFC would completely erase these questions. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance In case of path A, it is unclear how performances would be affected. Path A consists in moving client-side operations to the runtime without changing these operations, and as such performance differences are expected to be minimal. Overall, we're talking about one addition/subtraction per malloc and per free, so this is more than likely completely negligible. In case of path B and C, the performance gain would be a net positive, as this RFC strictly removes things. -Ergonomics +Ergonomics This RFC would isolate the client and runtime more from each other, making it a bit easier to reason about the client or the runtime in isolation. -Compatibility +Compatibility Not a breaking change. The runtime-side changes can be applied immediately (without even having to wait for changes in the client), then as soon as the runtime is updated, the client can be updated without any transition period. One can even consider updating the client before the runtime, as it corresponds to path C. -Prior Art and References +Prior Art and References None. -Unresolved Questions +Unresolved Questions None. -Future Directions and Related Material +Future Directions and Related Material This RFC follows the same path as https://github.com/polkadot-fellows/RFCs/pull/4 by scoping everything related to memory allocations to the runtime. (source) Table of Contents @@ -8582,7 +8995,7 @@ The :heappages are a rather obscure feature, and it is not clear wh AuthorAdam Clay Steeber -Summary +Summary This RFC proposes adding a trivial governance track on Kusama to facilitate X (formerly known as Twitter) posts on the @kusamanetwork account. The technical aspect of implementing this in the runtime is very inconsequential and straight-forward, though it might get more technical if the Fellowship wants to regulate this track with a non-existent permission set. If this is implemented it would need to be followed up with: @@ -8590,7 +9003,7 @@ with a non-existent permission set. If this is implemented it would need to be f the establishment of specifications for proposing X posts via this track, and the development of tools/processes to ensure that the content contained in referenda enacted in this track would be automatically posted on X. -Motivation +Motivation The overall motivation for this RFC is to decentralize the management of the Kusama brand/communication channel to KSM holders. This is necessary in my opinion primarily because of the inactivity of the account in recent history, with posts spanning weeks or months apart. I am currently unaware of who/what entity manages the Kusama X account, but if they are affiliated with Parity or W3F this proposed solution could also offload some of the legal ramifications of making (or not making) @@ -8600,11 +9013,11 @@ and the community becomes totally autonomous in the management of Kusama's X pos that could be offloaded to openGov, provided this proof-of-concept is successful. Finally, this RFC is the epitome of experimentation that Kusama is ideal for. This proposal may spark newfound excitement for Kusama and help us realize Kusama's potential for pushing boundaries and trying new unconventional ideas. -Stakeholders +Stakeholders This idea has not been formalized by any individual (or group of) KSM holder(s). To my knowledge the socialization of this idea is contained entirely in my recent X post here, but it is possible that an idea like this one has been discussed in other places. It appears to me that the ecosystem would welcome a change like this which is why I am taking action to formalize the discussion. -Explanation +Explanation The implementation of this idea can be broken down into 3 primary phases: Phase 1 - Track configurations First, we begin with this RFC to ensure all feedback can be discussed and implemented in the proposal. After the Fellowship and the community come to a reasonable @@ -8657,7 +9070,7 @@ to implement them. Here's what would be needed: a UI to allow layman users to propose referenda on this track After everything is complete, we can update the Kusama wiki to include documentation on the X post specifications and include links to the tools/UI. -Drawbacks +Drawbacks The main drawback to this change is that it requires a lot of off-chain coordination. It's easy enough to include the track on Kusama but it's a totally different challenge to make it function as intended. The tools need to be built and the auth tokens need to be managed. It would certainly add an administrative burden to whoever manages the X account since they would either need to run the tools themselves or manage auth tokens. @@ -8669,28 +9082,28 @@ If that happens, we risk getting Kusama banned on X! agency to manage posts. It wouldn't be decentralized but it would probably be more effective in terms of creating good content. Finally, this solution is merely pseudo-decentralization since the X account manager would still have ultimate control of the account. It's decentralized insofar as the auth tokens are given to people actually running the tools; a house of cards is required to facilitate X posts via this track. Not ideal. -Testing, Security, and Privacy +Testing, Security, and Privacy There's major precedent for configuring tracks on openGov given the amount of power tracks have, so it shouldn't be hard to come up with a sound configuration. That's why I recommend restricting permissions of this track to remarks and batches of remarks, or something equally inconsequential. Building the tools for this implementation is really straight-forward and could be audited by Fellowship members, and the community at large, on Github. The largest security concern would be the management of Kusama's X account's auth tokens. We would need to ensure that they aren't compromised. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance If a track on Kusama promises users that compliant referenda enacted therein would be posted on Kusama's X account, users would expect that track to perform as promised. If the house of cards tumbles down and a compliant referendum doesn't actually get anything posted, users might think that Kusama is broken or unreliable. This could be damaging to Kusama's image and cause people to question the soundness of other features on Kusama. As mentioned in the drawbacks, the performance of this feature would depend on off-chain coordinations. We can reduce the administrative burden of these coordinations by funding third parties with the Treasury to deal with it, but then we're relying on trusting these parties. -Ergonomics +Ergonomics By adding a new track to Kusama, governance platforms like Polkassembly or Nova Wallet would need to include it on their applications. This shouldn't be too much of a burden or overhead since they've already built the infrastructure for other openGov tracks. -Compatibility +Compatibility This change wouldn't break any compatibility as far as I know. References One reference to a similar feature requiring on-chain/off-chain coordination would be the Kappa-Sigma-Mu Society. Nothing on-chain necessarily enforces the rules or facilitates bids, challenges, defenses, etc. However, the Society has managed to maintain itself with integrity to its rules. So I don't think this is totally out of Kusama's scope. But it will require some off-chain effort to maintain. -Unresolved Questions +Unresolved Questions Who will develop the tools necessary to implement this feature? How do we select them? How can this idea be better implemented with on-chain/substrate features? @@ -8729,11 +9142,11 @@ out of Kusama's scope. But it will require some off-chain effort to maintain.AuthorsJelliedOwl -Summary +Summary The current size of the decision deposit on some tracks is too high for many proposers. As a result, those needing to use it have to find someone else willing to put up the deposit for them - and a number of legitimate attempts to use the root track have timed out. This track would provide a more affordable (though slower) route for these holders to use the root track. -Motivation +Motivation There have been recent attempts to use the Kusama root track which have timed out with no decision deposit placed. Usually, these referenda have been related to parachain registration related issues. -Explanation +Explanation Propose to address this by adding a new referendum track [22] Referendum Deposit which can place the decision deposit on another referendum. This would require the following changes: [Referenda Pallet] Modify the placeDecisionDesposit function to additionally allow it to be called by root, with root call bypassing the requirements for a deposit payment. @@ -8757,23 +9170,23 @@ out of Kusama's scope. But it will require some off-chain effort to maintain.Approval & Support curves: As per the root track, timed to match the decision period Maximum deciding: 10 -Drawbacks +Drawbacks This track would provide a route to starting a root referendum with a much-reduced slashable deposit. This might be undesirable but, assuming the decision deposit cost for this track is still high enough, slashing would still act as a disincentive. An alternative to this might be to reduce the decision deposit size some of the more expensive tracks. However, part of the purpose of the high deposit - at least on the root track - is to prevent spamming the limited queue with junk referenda. -Testing, Security, and Privacy +Testing, Security, and Privacy Will need additional tests case for the modified pallet and runtime. No security or privacy issues. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance No significant performance impact. -Ergonomics +Ergonomics Only changes related to adding the track. Existing functionality is unchanged. -Compatibility +Compatibility No compatibility issues. -Prior Art and References +Prior Art and References Recent discussion / referendum for an alternative way to address this issue: Kusama Referendum 340 - Funding a Decision Deposit Sponsor -Unresolved Questions +Unresolved Questions Feedback on whether my proposed implementation of this is the best way to address the issue - including which calls the track should be allowed to make. Are the track parameters correct or should be use something different? Alternative would be welcome. (source) Table of Contents @@ -8818,7 +9231,7 @@ out of Kusama's scope. But it will require some off-chain effort to maintain.AuthorsAbdelrahman Soliman (Boda) -Summary +Summary A pallet to facilitate enhanced multisig accounts. The main enhancement is that we store a multisig account in the state with related info (signers, threshold,..etc). The module affords enhanced control over administrative operations such as adding/removing signers, changing the threshold, account deletion, canceling an existing proposal. Each signer can approve/reject a proposal while still exists. The proposal is not intended for migrating or getting rid of existing multisig. It's to allow both options to coexist. For the rest of the RFC We use the following terms: @@ -8826,7 +9239,7 @@ out of Kusama's scope. But it will require some off-chain effort to maintain.Stateful Multisig to refer to the proposed pallet. Stateless Multisig to refer to the current multisig pallet in polkadot-sdk. -Motivation +Motivation Problem Entities in the Polkadot ecosystem need to have a way to manage their funds and other operations in a secure and efficient way. Multisig accounts are a common way to achieve this. Entities by definition change over time, members of the entity may change, threshold requirements may change, and the multisig account may need to be deleted. For even more enhanced hierarchical control, the multisig account may need to be controlled by other multisig accounts. Current native solutions for multisig operations are less optimal, performance-wise (as we'll explain later in the RFC), and lack fine-grained control over the multisig account. @@ -8868,12 +9281,12 @@ DAOs can utilize multisig accounts to ensure that decisions are made collectivel and much more... -Stakeholders +Stakeholders Polkadot holders Polkadot developers -Explanation +Explanation I've created the stateful multisig pallet during my studies in Polkadot Blockchain Academy under supervision from @shawntabrizi and @ank4n. After that, I've enhanced it to be fully functional and this is a draft PR#3300 in polkadot-sdk. I'll list all the details and design decisions in the following sections. Note that the PR is not 1-1 exactly to the current RFC as the RFC is a more polished version of the PR after updating based on the feedback and discussions. Let's start with a sequence diagram to illustrate the main operations of the Stateful Multisig. @@ -9286,14 +9699,14 @@ pub type PendingProposals<T: Config> = StorageDoubleMap< In case threshold is lower than the number of approvers then the proposal is still valid. In case threshold is higher than the number of approvers then we catch it during execute proposal and error. -Drawbacks +Drawbacks New pallet to maintain. -Testing, Security, and Privacy +Testing, Security, and Privacy Standard audit/review requirements apply. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance Doing back of the envelop calculation to proof that the stateful multisig is more efficient than the stateless multisig given it's smaller footprint size on blocks. Quick review over the extrinsics for both as it affects the block size: Stateless Multisig: @@ -9357,17 +9770,17 @@ We have the following extrinsics: | Stateless | N^2 | Nil | | Stateful | N | N | So even though the stateful multisig has a larger state size, it's still more efficient in terms of block size and total footprint on the blockchain. -Ergonomics +Ergonomics The Stateful Multisig will have better ergonomics for managing multisig accounts for both developers and end-users. -Compatibility +Compatibility This RFC is compatible with the existing implementation and can be handled via upgrades and migration. It's not intended to replace the existing multisig pallet. -Prior Art and References +Prior Art and References multisig pallet in polkadot-sdk -Unresolved Questions +Unresolved Questions On account deletion, should we transfer remaining deposits to treasury or remove signers' addition deposits completely and consider it as fees to start with? -Future Directions and Related Material +Future Directions and Related Material Batch addition/removal of signers. @@ -9413,9 +9826,9 @@ Implement call filters. This will allow multisig accounts to only accept certain AuthorsLuke Schoen -Summary +Summary This proposes to increase the maximum length of PGP Fingerprint values from a 20 bytes/chars limit to a 40 bytes/chars limit. -Motivation +Motivation Background Pretty Good Privacy (PGP) Fingerprints are shorter versions of their corresponding Public Key that may be printed on a business card. They may be used by someone to validate the correct corresponding Public Key. @@ -9433,7 +9846,7 @@ Implement call filters. This will allow multisig accounts to only accept certain Solution Requirements The maximum length of identity PGP Fingerprint values should be increased from the current 20 bytes/chars limit at least a 40 bytes/chars limit to support PGP Fingerprints and GPG Fingerprints. -Stakeholders +Stakeholders Any Polkadot account holder wishing to use a Polkadot on-chain identity for their: @@ -9442,30 +9855,30 @@ Implement call filters. This will allow multisig accounts to only accept certain -Explanation +Explanation If a user tries to setting an on-chain identity by creating an extrinsic using Polkadot.js with identity > setIdentity(info), then if they try to provide their 40 character long PGP Fingerprint or GPG Fingerprint, which is longer than the maximum length of 20 bytes/chars [u8;20], then they will encounter this error: createType(Call):: Call: failed decoding identity.setIdentity:: Struct: failed on args: {...}:: Struct: failed on pgpFingerprint: Option<[u8;20]>:: Expected input with 20 bytes (160 bits), found 40 bytes Increasing maximum length of identity PGP Fingerprint values from the current 20 bytes/chars limit to at least a 40 bytes/chars limit would overcome these errors and support PGP Fingerprints and GPG Fingerprints, satisfying the solution requirements. -Drawbacks +Drawbacks No drawbacks have been identified. -Testing, Security, and Privacy +Testing, Security, and Privacy Implementations would be tested for adherance by checking that 40 bytes/chars PGP Fingerprints are supported. No effect on security or privacy has been identified than already exists. No implementation pitfalls have been identified. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance It would be an optimization, since the associated exposed interfaces to developers and end-users could start being used. To minimize additional overhead the proposal suggests a 40 bytes/chars limit since that would at least provide support for PGP Fingerprints, satisfying the solution requirements. -Ergonomics +Ergonomics No potential ergonomic optimizations have been identified. -Compatibility +Compatibility Updates to Polkadot.js Apps, API and its documentation and those referring to it may be required. -Prior Art and References +Prior Art and References No prior articles or references. -Unresolved Questions +Unresolved Questions No further questions at this stage. -Future Directions and Related Material +Future Directions and Related Material Relates to RFC entitled "Increase maximum length of identity raw data values from 32 bytes". (source) Table of Contents @@ -9511,10 +9924,10 @@ Implement call filters. This will allow multisig accounts to only accept certain AuthorsLuke Schoen -Summary +Summary This proposes to require a slashable deposit in the broker pallet when initially purchasing or renewing Bulk Coretime or Instantaneous Coretime cores. Additionally, it proposes to record a reputational status based on the behavior of the purchaser, as it relates to their use of Kusama Coretime cores that they purchase, and to possibly reserve a proportion of the cores for prospective purchasers that have an on-chain identity. -Motivation +Motivation Background There are sales of Kusama Coretime cores that are scheduled to occur later this month by Coretime Marketplace Lastic.xyz initially in limited quantities, and potentially also by RegionX in future that is subject to their Polkadot referendum #582. This poses a risk in that some Kusama Coretime core purchasers may buy Kusama Coretime cores when they have no intention of actually placing a workload on them or leasing them out, which would prevent those that wish to purchase and actually use Kusama Coretime cores from being able to use any at cores at all. Problem @@ -9546,34 +9959,34 @@ Implement call filters. This will allow multisig accounts to only accept certain Reputation. To disincentivise certain behaviours, a reputational status indicator could be used to record the historic behavior of the purchaser and whether on-chain judgement has determined they have adequately rectified that behaviour, as it relates to their usage of Kusama Coretime cores that they purchase. -Stakeholders +Stakeholders Any Kusama account holder wishing to use the Broker pallet in any upcoming Kusama Coretime sales. Any prospective Kusama Coretime purchaser, developer, and user. KSM holders. -Drawbacks -Performance +Drawbacks +Performance The slashable deposit if set too high, may result in an economic impact, where less Kusama Coretime core sales are purchased. -Testing, Security, and Privacy +Testing, Security, and Privacy Lack of a slashable deposit in the Broker pallet is a security concern, since it exposes Kusama Coretime sales to potential abuse. Reserving a proportion of Kusama Coretime sales cores for those with on-chain identities should not be to the exclusion of accounts that wish to remain anonymous or cause cores to be wasted unnecessarily. As such, if cores that are reserved for on-chain identities remain unsold then they should be released to anonymous accounts that are on a waiting list. No implementation pitfalls have been identified. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance It should improve performance as it reduces the potential for state bloat since there is less risk of undesirable Kusama Coretime sales activity that would be apparent with no requirement for a slashable deposit or there being no reputational risk to purchasers that waste or misuse Kusama Coretime cores. The solution proposes to minimize the risk of some Kusama Coretime cores not even being used or leased to perform any tasks at all. It will be important to monitor and manage the slashable deposits, purchaser reputations, and utilization of the proportion of cores that are reserved for accounts with an on-chain identity. -Ergonomics +Ergonomics The mechanism for setting a slashable deposit amount, should avoid undue complexity for users. -Compatibility +Compatibility Updates to Polkadot.js Apps, API and its documentation and those referring to it may be required. -Prior Art and References +Prior Art and References Prior Art No prior articles. -Unresolved Questions +Unresolved Questions None -Future Directions and Related Material +Future Directions and Related Material None (source) Table of Contents @@ -9606,7 +10019,7 @@ Implement call filters. This will allow multisig accounts to only accept certain AuthorsKian Paimani -Summary +Summary This RFC proposes a new pallet_inflation to be added to the Polkadot runtime, which improves inflation machinery of the Polkadot relay chain in a number of ways: @@ -9616,7 +10029,7 @@ inflation machinery of the Polkadot relay chain in a number of ways: systems, as proposed RFC32. -Motivation +Motivation The existing inflation logic in the relay chain suffers from a number of drawbacks: It is dated, as the number of parachain slots (and consequently auctions) will soon no longer be a @@ -9649,7 +10062,7 @@ changes to the token holders and researchers and further governance proposals. -Stakeholders +Stakeholders This RFC is relevant to the following stakeholders, listed from high to low impact: All token holders who participate in governance, as they can possibly now propose (some degree of) @@ -9659,7 +10072,7 @@ changes may or may not require a particular governance track. the means that this pallet provides. All other token holders. -Explanation +Explanation Existing Order First, let's further elaborate on the existing order. The current inflation logic is deeply nested in pallet_staking, and pallet_staking::Config::EraPayout interface. Through this trait, the @@ -9782,7 +10195,7 @@ prefixed by dynamic_params.
child_trie_info
includeDescendants
This protocol keeps the same maximum response size limit as currently exists (16 MiB). It is not possible for the querier to know in advance whether its query will lead to a reply that exceeds the maximum size. If the reply is too large, the replier should send back only a limited number (but at least one) of requested items in the proof. The querier should then send additional requests for the rest of the items. A response containing none of the requested items is invalid.
The server is allowed to silently discard some keys of the request if it judges that the number of requested keys is too high. This is in line with the fact that the server might truncate the response.
This proposal doesn't handle one specific situation: what if a proof containing a single specific item would exceed the response size limit? For example, if the response size limit was 1 MiB, querying the runtime code (which is typically 1.0 to 1.5 MiB) would be impossible as it's impossible to generate a proof less than 1 MiB. The response size limit is currently 16 MiB, meaning that no single storage item must exceed 16 MiB.
Unfortunately, because it's impossible to verify a Merkle proof before having received it entirely, parsing the proof in a streaming way is also not possible.
A way to solve this issue would be to Merkle-ize large storage items, so that a proof could include only a portion of a large storage item. Since this would require a change to the trie format, it is not realistically feasible in a short time frame.
The main security consideration concerns the size of replies and the resources necessary to generate them. It is for example easily possible to ask for all keys and values of the chain, which would take a very long time to generate. Since responses to this networking protocol have a maximum size, the replier should truncate proofs that would lead to the response being too large. Note that it is already possible to send a query that would lead to a very large reply with the existing network protocol. The only thing that this proposal changes is that it would make it less complicated to perform such an attack.
Implementers of the replier side should be careful to detect early on when a reply would exceed the maximum reply size, rather than inconditionally generate a reply, as this could take a very large amount of CPU, disk I/O, and memory. Existing implementations might currently be accidentally protected from such an attack thanks to the fact that requests have a maximum size, and thus that the list of keys in the query was bounded. After this proposal, this accidental protection would no longer exist.
Malicious server nodes might truncate Merkle proofs even when they don't strictly need to, and it is not possible for the client to (easily) detect this situation. However, malicious server nodes can already do undesirable things such as throttle down their upload bandwidth or simply not respond. There is no need to handle unnecessarily truncated Merkle proofs any differently than a server simply not answering the request.
It is unclear to the author of the RFC what the performance implications are. Servers are supposed to have limits to the amount of resources they use to respond to requests, and as such the worst that can happen is that light client requests become a bit slower than they currently are.
The prior networking protocol is maintained for now. The older version of this protocol could get removed in a long time.
None. This RFC is a clean-up of an existing mechanism.
The current networking protocol could be deprecated in a long time. Additionally, the current "state requests" protocol (used for warp syncing) could also be deprecated in favor of this one.
This document is a proposal for restructuring the bulk markets in the Polkadot UC's coretime allocation system to improve efficiency and fairness. The proposal suggests separating the BULK_PERIOD into MARKET_PERIOD and RENEWAL_PERIOD, allowing for a market-driven price discovery through a clearing price Dutch auction during the MARKET_PERIOD followed by renewal offers at the MARKET_PRICE during the RENEWAL_PERIOD. The new system ensures synchronicity between renewal and market prices, fairness among all current tenants, and efficient price discovery, while preserving price caps to provide security for current tenants. It seeks to start a discussion about the possibility of long-term leases.
BULK_PERIOD
MARKET_PERIOD
RENEWAL_PERIOD
MARKET_PRICE
While the initial RFC-1 has provided a robust framework for Coretime allocation within the Polkadot UC, this proposal builds upon its strengths and uses many provided building blocks to address some areas that could be further improved.
In particular, this proposal introduces the following changes:
The premise of this proposal is to reduce complexity by introducing a common price (that develops releative to capacity consumption of Polkadot UC), while still allowing for market forces to add efficiency. Longterm lease owners still receive priority IF they can pay (close to) the market price. This prevents a situation where the renewal price significantly diverges from renewal prices which allows for core captures. While maximum price increase certainty might seem contradictory to efficient price discovery, the proposed model aims to balance these elements, utilizing market forces to determine the price and allocate cores effectively within certain bounds. It must be stated, that potential price increases remain predictable (in the worst-case) but could be higher than in the originally proposed design. The argument remains, however, that we need to allow market forces to affect all prices for an efficient Coretime pricing and allocation.
Ultimately, this the framework proposed here adheres to all requirements stated in RFC-1.
The BULK_PERIOD has been restructured into two primary segments: the MARKET_PERIOD and RENEWAL_PERIOD, along with an auxiliary SETTLEMENT_PERIOD. This latter period doesn't necessitate any actions from the coretime system chain, but it facilitates a more efficient allocation of coretime in secondary markets. A significant departure from the original proposal lies in the timing of renewals, which now occur post-market phase. This adjustment aims to harmonize renewal prices with their market counterparts, ensuring a more consistent and equitable pricing model.
SETTLEMENT_PERIOD
There are trade-offs that arise from this proposal, compared to the initial model. The most notable one is that here, I prioritize requirement 6 over requirement 2. The price, in the very "worst-case" (meaning a huge explosion in demand for coretime) could lead to a much larger increase of prices in Coretime. From an economic perspective, this (rare edgecase) would also mean that we'd vastly underprice Coretime in the original model, leading to highly inefficient allocations.
This RFC builds extensively on the available ideas put forward in RFC-1.
Additionally, I want to express a special thanks to Samuel Haefner and Shahar Dobzinski for fruitful discussions and helping me structure my thoughts.
The technical feasability needs to be assessed.
This RFC proposes changes that enable the use of absolute locations in AccountId derivations, which allows protocols built using XCM to have static account derivations in any runtime, regardless of its position in the family hierarchy.
These changes would allow protocol builders to leverage absolute locations to maintain the exact same derived account address across all networks in the ecosystem, thus enhancing user experience.
One such protocol, that is the original motivation for this proposal, is InvArch's Saturn Multisig, which gives users a unifying multisig and DAO experience across all XCM connected chains.
This proposal aims to make it possible to derive accounts for absolute locations, enabling protocols that require the ability to maintain the same derived account in any runtime. This is done by deriving accounts from the hash of described absolute locations, which are static across different destinations.
The same location can be represented in relative form and absolute form like so:
#![allow(unused)] @@ -8164,25 +8577,25 @@ Also note that child tries aren't considered as descendants of the main trie whe DescribeFamily The DescribeFamily location descriptor is part of the HashedDescription MultiLocation hashing system and exists to describe locations in an easy format for encoding and hashing, so that an AccountId can be derived from this MultiLocation. This implementation contains a match statement that does not match against absolute locations, so changes to it involve matching against absolute locations and providing appropriate descriptions for hashing. -Drawbacks +Drawbacks No drawbacks have been identified with this proposal. -Testing, Security, and Privacy +Testing, Security, and Privacy Tests can be done using simple unit tests, as this is not a change to XCM itself but rather to types defined in xcm-builder. Security considerations should be taken with the implementation to make sure no unwanted behavior is introduced. This proposal does not introduce any privacy considerations. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance Depending on the final implementation, this proposal should not introduce much overhead to performance. -Ergonomics +Ergonomics The ergonomics of this proposal depend on the final implementation details. -Compatibility +Compatibility Backwards compatibility should remain unchanged, although that depend on the final implementation. -Prior Art and References +Prior Art and References DescirbeFamily type: https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/location_conversion.rs#L122 WithComputedOrigin type: https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/xcm-builder/src/barriers.rs#L153 -Unresolved Questions +Unresolved Questions Implementation details and overall code is still up to discussion. (source) Table of Contents @@ -8214,7 +8627,7 @@ Also note that child tries aren't considered as descendants of the main trie whe ChaosDAO -Summary +Summary This RFC proposes to make modifications to voting power delegations as part of the Conviction Voting pallet. The changes being proposed include: Allow a Delegator to vote independently of their Delegate if they so desire. @@ -8222,7 +8635,7 @@ Also note that child tries aren't considered as descendants of the main trie whe Make a change so that when a delegate votes abstain their delegated votes also vote abstain. Allow a Delegator to delegate/ undelegate their votes for all tracks with a single call. -Motivation +Motivation It has become clear since the launch of OpenGov that there are a few common tropes which pop up time and time again: The frequency of referenda is often too high for network participants to have sufficient time to review, comprehend, and ultimately vote on each individual referendum. This means that these network participants end up being inactive in on-chain governance. @@ -8230,13 +8643,13 @@ Also note that child tries aren't considered as descendants of the main trie whe Delegating votes for all tracks currently requires long batched calls which result in high fees for the Delegator - resulting in a reluctance from many to delegate their votes. We believe (based on feedback from token holders with a larger stake in the network) that if there were some changes made to delegation mechanics, these larger stake holders would be more likely to delegate their voting power to active network participants – thus greatly increasing the support turnout. -Stakeholders +Stakeholders The primary stakeholders of this RFC are: The Polkadot Technical Fellowship who will have to research and implement the technical aspects of this RFC DOT token holders in general -Explanation +Explanation This RFC proposes to make 4 changes to the convictionVoting pallet logic in order to improve the user experience of those delegating their voting power to another account. @@ -8252,21 +8665,21 @@ Also note that child tries aren't considered as descendants of the main trie whe Allow a Delegator to delegate/ undelegate their votes for all tracks with a single call - in order to delegate votes across all tracks, a user must batch 15 calls - resulting in high costs for delegation. A single call for delegate_all/ undelegate_all would reduce the complexity and therefore costs of delegations considerably for prospective Delegators. -Drawbacks +Drawbacks We do not foresee any drawbacks by implementing these changes. If anything we believe that this should help to increase overall voter turnout (via the means of delegation) which we see as a net positive. -Testing, Security, and Privacy +Testing, Security, and Privacy We feel that the Polkadot Technical Fellowship would be the most competent collective to identify the testing requirements for the ideas presented in this RFC. -Performance, Ergonomics, and Compatibility -Performance +Performance, Ergonomics, and Compatibility +Performance This change may add extra chain storage requirements on Polkadot, especially with respect to nested delegations. Ergonomics & Compatibility The change to add nested delegations may affect governance interfaces such as Nova Wallet who will have to apply changes to their indexers to support nested delegations. It may also affect the Polkadot Delegation Dashboard as well as Polkassembly & SubSquare. We want to highlight the importance for ecosystem builders to create a mechanism for indexers and wallets to be able to understand that changes have occurred such as increasing the pallet version, etc. -Prior Art and References +Prior Art and References N/A -Unresolved Questions +Unresolved Questions N/A -Future Directions and Related Material +Future Directions and Related Material Additionally we would like to re-open the conversation about the potential for there to be free delegations. This was discussed by Dr Gavin Wood at Sub0 2022 and we feel like this would go a great way towards increasing the amount of network participants that are delegating: https://youtu.be/hSoSA6laK3Q?t=526 Overall, we strongly feel that delegations are a great way to increase voter turnout, and the ideas presented in this RFC would hopefully help in that aspect. (source) @@ -8308,9 +8721,9 @@ Also note that child tries aren't considered as descendants of the main trie whe AuthorsSergej Sakac -Summary +Summary This RFC proposes a new model for a sustainable on-demand parachain registration, involving a smaller initial deposit and periodic rent payments. The new model considers that on-demand chains may be unregistered and later re-registered. The proposed solution also ensures a quick startup for on-demand chains on Polkadot in such cases. -Motivation +Motivation With the support of on-demand parachains on Polkadot, there is a need to explore a new, more cost-effective model for registering validation code. In the current model, the parachain manager is responsible for reserving a unique ParaId and covering the cost of storing the validation code of the parachain. These costs can escalate, particularly if the validation code is large. We need a better, sustainable model for registering on-demand parachains on Polkadot to help smaller teams deploy more easily. This RFC suggests a new payment model to create a more financially viable approach to on-demand parachain registration. In this model, a lower initial deposit is required, followed by recurring payments upon parachain registration. This new model will coexist with the existing one-time deposit payment model, offering teams seeking to deploy on-demand parachains on Polkadot a more cost-effective alternative. @@ -8324,11 +8737,11 @@ Also note that child tries aren't considered as descendants of the main trie whe The solution MUST allow anyone to pay the rent. The solution MUST prevent the removal of validation code if it could still be required for disputes or approval checking. -Stakeholders +Stakeholders Future Polkadot on-demand Parachains -Explanation +Explanation This RFC proposes a set of changes that will enable the new rent based approach to registering and storing validation code on-chain. The new model, compared to the current one, will require periodic rent payments. The parachain won't be pruned automatically if the rent is not paid, but by permitting anyone to prune the parachain and rewarding the caller, there will be an incentive for the removal of the validation code. On-demand parachains should still be able to utilize the current one-time payment model. However, given the size of the deposit required, it's highly likely that most on-demand parachains will opt for the new rent-based model. @@ -8435,27 +8848,27 @@ pub(super) type CheckedCodeHash<T: Config> = StorageMap<_, Twox64Concat, ParaId, ValidationCodeHash>; }
The DescribeFamily location descriptor is part of the HashedDescription MultiLocation hashing system and exists to describe locations in an easy format for encoding and hashing, so that an AccountId can be derived from this MultiLocation.
DescribeFamily
HashedDescription
This implementation contains a match statement that does not match against absolute locations, so changes to it involve matching against absolute locations and providing appropriate descriptions for hashing.
No drawbacks have been identified with this proposal.
Tests can be done using simple unit tests, as this is not a change to XCM itself but rather to types defined in xcm-builder.
xcm-builder
Security considerations should be taken with the implementation to make sure no unwanted behavior is introduced.
This proposal does not introduce any privacy considerations.
Depending on the final implementation, this proposal should not introduce much overhead to performance.
The ergonomics of this proposal depend on the final implementation details.
Backwards compatibility should remain unchanged, although that depend on the final implementation.
DescirbeFamily
WithComputedOrigin
Implementation details and overall code is still up to discussion.
This RFC proposes to make modifications to voting power delegations as part of the Conviction Voting pallet. The changes being proposed include:
It has become clear since the launch of OpenGov that there are a few common tropes which pop up time and time again:
We believe (based on feedback from token holders with a larger stake in the network) that if there were some changes made to delegation mechanics, these larger stake holders would be more likely to delegate their voting power to active network participants – thus greatly increasing the support turnout.
This RFC proposes to make 4 changes to the convictionVoting pallet logic in order to improve the user experience of those delegating their voting power to another account.
Allow a Delegator to delegate/ undelegate their votes for all tracks with a single call - in order to delegate votes across all tracks, a user must batch 15 calls - resulting in high costs for delegation. A single call for delegate_all/ undelegate_all would reduce the complexity and therefore costs of delegations considerably for prospective Delegators.
delegate_all
undelegate_all
We do not foresee any drawbacks by implementing these changes. If anything we believe that this should help to increase overall voter turnout (via the means of delegation) which we see as a net positive.
We feel that the Polkadot Technical Fellowship would be the most competent collective to identify the testing requirements for the ideas presented in this RFC.
This change may add extra chain storage requirements on Polkadot, especially with respect to nested delegations.
The change to add nested delegations may affect governance interfaces such as Nova Wallet who will have to apply changes to their indexers to support nested delegations. It may also affect the Polkadot Delegation Dashboard as well as Polkassembly & SubSquare.
We want to highlight the importance for ecosystem builders to create a mechanism for indexers and wallets to be able to understand that changes have occurred such as increasing the pallet version, etc.
Additionally we would like to re-open the conversation about the potential for there to be free delegations. This was discussed by Dr Gavin Wood at Sub0 2022 and we feel like this would go a great way towards increasing the amount of network participants that are delegating: https://youtu.be/hSoSA6laK3Q?t=526
Overall, we strongly feel that delegations are a great way to increase voter turnout, and the ideas presented in this RFC would hopefully help in that aspect.
This RFC proposes a new model for a sustainable on-demand parachain registration, involving a smaller initial deposit and periodic rent payments. The new model considers that on-demand chains may be unregistered and later re-registered. The proposed solution also ensures a quick startup for on-demand chains on Polkadot in such cases.
With the support of on-demand parachains on Polkadot, there is a need to explore a new, more cost-effective model for registering validation code. In the current model, the parachain manager is responsible for reserving a unique ParaId and covering the cost of storing the validation code of the parachain. These costs can escalate, particularly if the validation code is large. We need a better, sustainable model for registering on-demand parachains on Polkadot to help smaller teams deploy more easily.
ParaId
This RFC suggests a new payment model to create a more financially viable approach to on-demand parachain registration. In this model, a lower initial deposit is required, followed by recurring payments upon parachain registration.
This new model will coexist with the existing one-time deposit payment model, offering teams seeking to deploy on-demand parachains on Polkadot a more cost-effective alternative.
This RFC proposes a set of changes that will enable the new rent based approach to registering and storing validation code on-chain. The new model, compared to the current one, will require periodic rent payments. The parachain won't be pruned automatically if the rent is not paid, but by permitting anyone to prune the parachain and rewarding the caller, there will be an incentive for the removal of the validation code.
On-demand parachains should still be able to utilize the current one-time payment model. However, given the size of the deposit required, it's highly likely that most on-demand parachains will opt for the new rent-based model.
To enable parachain re-registration, we should introduce a new extrinsic in the paras-registrar pallet that allows this. The logic of this extrinsic will be same as regular registration, with the distinction that it can be called by anyone, and the required deposit will be smaller since it only has to cover for the storage of the validation code.
paras-registrar
This RFC does not alter the process of reserving a ParaId, and therefore, it does not propose reducing it, even though such a reduction could be beneficial.
Even though this RFC doesn't delve into the specifics of the configuration values for parachain registration but rather focuses on the mechanism, configuring it carelessly could lead to potential problems.
Since the validation code hash and head data are not removed when the parachain is pruned but only when the deregister extrinsic is called, the T::DataDepositPerByte must be set to a higher value to create a strong enough incentive for removing it from the state.
deregister
T::DataDepositPerByte
The implementation of this RFC will be tested on Rococo first.
Proper research should be conducted on setting the configuration values of the new system since these values can have great impact on the network.
An audit is required to ensure the implementation's correctness.
This RFC does not affect the current parachains, nor the parachains that intend to use the one-time payment model for parachain registration.
This RFC does not break compatibility.
Prior discussion on this topic: https://github.com/paritytech/polkadot-sdk/issues/1796
As noted in this GitHub issue, we want to raise the per-byte cost of on-chain data storage. However, a substantial increase in this cost would make it highly impractical for on-demand parachains to register on Polkadot. This RFC offers an alternative solution for on-demand parachains, ensuring that the per-byte cost increase doesn't overly burden the registration process.
Rather than enforce a limit to the total memory consumption on the client side by loading the value at :heappages, enforce that limit on the runtime side.
:heappages
From the early days of Substrate up until recently, the runtime was present in two forms: the wasm runtime (wasm bytecode passed through an interpreter) and the native runtime (native code directly run by the client).
Since the wasm runtime has a lower amount of available memory (4 GiB maximum) compared to the native runtime, and in order to ensure sure that the wasm and native runtimes always produce the same outcome, it was necessary to clamp the amount of memory available to both runtimes to the same value.
In order to achieve this, a special storage key (a "well-known" key) :heappages was introduced and represents the number of "wasm pages" (one page equals 64kiB) of memory that are available to the memory allocator of the runtimes. If this storage key is absent, it defaults to 2048, which is 128 MiB.
The native runtime has since then been disappeared, but the concept of "heap pages" still exists. This RFC proposes a simplification to the design of Polkadot by removing the concept of "heap pages" as is currently known, and proposes alternative ways to achieve the goal of limiting the amount of memory available.
Client implementers and low-level runtime developers.
This RFC proposes the following changes to the client:
Each parachain can choose the option that they prefer, but the author of this RFC strongly suggests either option C or B.
In case of path A, there is one situation where the behaviour pre-RFC is not equivalent to the one post-RFC: when a host function that performs an allocation (for example ext_storage_get) is called, without this RFC this allocation might fail due to reaching the maximum heap pages, while after this RFC this will always succeed. This is most likely not a problem, as storage values aren't supposed to be larger than a few megabytes at the very maximum.
ext_storage_get
In the unfortunate event where the runtime runs out of memory, path B would make it more difficult to relax the memory limit, as we would need to re-upload the entire Wasm, compared to updating only :heappages in path A or before this RFC. In the case where the runtime runs out of memory only in the specific event where the Wasm runtime is modified, this could brick the chain. However, this situation is no different than the thousands of other ways that a bug in the runtime can brick a chain, and there's no reason to be particularily worried about this situation in particular.
This RFC would reduce the chance of a consensus issue between clients. The :heappages are a rather obscure feature, and it is not clear what happens in some corner cases such as the value being too large (error? clamp?) or malformed. This RFC would completely erase these questions.
In case of path A, it is unclear how performances would be affected. Path A consists in moving client-side operations to the runtime without changing these operations, and as such performance differences are expected to be minimal. Overall, we're talking about one addition/subtraction per malloc and per free, so this is more than likely completely negligible.
In case of path B and C, the performance gain would be a net positive, as this RFC strictly removes things.
This RFC would isolate the client and runtime more from each other, making it a bit easier to reason about the client or the runtime in isolation.
Not a breaking change. The runtime-side changes can be applied immediately (without even having to wait for changes in the client), then as soon as the runtime is updated, the client can be updated without any transition period. One can even consider updating the client before the runtime, as it corresponds to path C.
This RFC follows the same path as https://github.com/polkadot-fellows/RFCs/pull/4 by scoping everything related to memory allocations to the runtime.
This RFC proposes adding a trivial governance track on Kusama to facilitate X (formerly known as Twitter) posts on the @kusamanetwork account. The technical aspect of implementing this in the runtime is very inconsequential and straight-forward, though it might get more technical if the Fellowship wants to regulate this track with a non-existent permission set. If this is implemented it would need to be followed up with:
The overall motivation for this RFC is to decentralize the management of the Kusama brand/communication channel to KSM holders. This is necessary in my opinion primarily because of the inactivity of the account in recent history, with posts spanning weeks or months apart. I am currently unaware of who/what entity manages the Kusama X account, but if they are affiliated with Parity or W3F this proposed solution could also offload some of the legal ramifications of making (or not making) @@ -8600,11 +9013,11 @@ and the community becomes totally autonomous in the management of Kusama's X pos that could be offloaded to openGov, provided this proof-of-concept is successful.
Finally, this RFC is the epitome of experimentation that Kusama is ideal for. This proposal may spark newfound excitement for Kusama and help us realize Kusama's potential for pushing boundaries and trying new unconventional ideas.
This idea has not been formalized by any individual (or group of) KSM holder(s). To my knowledge the socialization of this idea is contained entirely in my recent X post here, but it is possible that an idea like this one has been discussed in other places. It appears to me that the ecosystem would welcome a change like this which is why I am taking action to formalize the discussion.
The implementation of this idea can be broken down into 3 primary phases:
First, we begin with this RFC to ensure all feedback can be discussed and implemented in the proposal. After the Fellowship and the community come to a reasonable @@ -8657,7 +9070,7 @@ to implement them. Here's what would be needed:
After everything is complete, we can update the Kusama wiki to include documentation on the X post specifications and include links to the tools/UI.
The main drawback to this change is that it requires a lot of off-chain coordination. It's easy enough to include the track on Kusama but it's a totally different challenge to make it function as intended. The tools need to be built and the auth tokens need to be managed. It would certainly add an administrative burden to whoever manages the X account since they would either need to run the tools themselves or manage auth tokens.
Finally, this solution is merely pseudo-decentralization since the X account manager would still have ultimate control of the account. It's decentralized insofar as the auth tokens are given to people actually running the tools; a house of cards is required to facilitate X posts via this track. Not ideal.
There's major precedent for configuring tracks on openGov given the amount of power tracks have, so it shouldn't be hard to come up with a sound configuration. That's why I recommend restricting permissions of this track to remarks and batches of remarks, or something equally inconsequential.
Building the tools for this implementation is really straight-forward and could be audited by Fellowship members, and the community at large, on Github.
The largest security concern would be the management of Kusama's X account's auth tokens. We would need to ensure that they aren't compromised.
If a track on Kusama promises users that compliant referenda enacted therein would be posted on Kusama's X account, users would expect that track to perform as promised. If the house of cards tumbles down and a compliant referendum doesn't actually get anything posted, users might think that Kusama is broken or unreliable. This could be damaging to Kusama's image and cause people to question the soundness of other features on Kusama.
As mentioned in the drawbacks, the performance of this feature would depend on off-chain coordinations. We can reduce the administrative burden of these coordinations by funding third parties with the Treasury to deal with it, but then we're relying on trusting these parties.
By adding a new track to Kusama, governance platforms like Polkassembly or Nova Wallet would need to include it on their applications. This shouldn't be too much of a burden or overhead since they've already built the infrastructure for other openGov tracks.
This change wouldn't break any compatibility as far as I know.
One reference to a similar feature requiring on-chain/off-chain coordination would be the Kappa-Sigma-Mu Society. Nothing on-chain necessarily enforces the rules or facilitates bids, challenges, defenses, etc. However, the Society has managed to maintain itself with integrity to its rules. So I don't think this is totally out of Kusama's scope. But it will require some off-chain effort to maintain.
The current size of the decision deposit on some tracks is too high for many proposers. As a result, those needing to use it have to find someone else willing to put up the deposit for them - and a number of legitimate attempts to use the root track have timed out. This track would provide a more affordable (though slower) route for these holders to use the root track.
There have been recent attempts to use the Kusama root track which have timed out with no decision deposit placed. Usually, these referenda have been related to parachain registration related issues.
Propose to address this by adding a new referendum track [22] Referendum Deposit which can place the decision deposit on another referendum. This would require the following changes:
placeDecisionDesposit
This track would provide a route to starting a root referendum with a much-reduced slashable deposit. This might be undesirable but, assuming the decision deposit cost for this track is still high enough, slashing would still act as a disincentive.
An alternative to this might be to reduce the decision deposit size some of the more expensive tracks. However, part of the purpose of the high deposit - at least on the root track - is to prevent spamming the limited queue with junk referenda.
Will need additional tests case for the modified pallet and runtime. No security or privacy issues.
No significant performance impact.
Only changes related to adding the track. Existing functionality is unchanged.
No compatibility issues.
Feedback on whether my proposed implementation of this is the best way to address the issue - including which calls the track should be allowed to make. Are the track parameters correct or should be use something different? Alternative would be welcome.
A pallet to facilitate enhanced multisig accounts. The main enhancement is that we store a multisig account in the state with related info (signers, threshold,..etc). The module affords enhanced control over administrative operations such as adding/removing signers, changing the threshold, account deletion, canceling an existing proposal. Each signer can approve/reject a proposal while still exists. The proposal is not intended for migrating or getting rid of existing multisig. It's to allow both options to coexist.
For the rest of the RFC We use the following terms:
Stateful Multisig
Stateless Multisig
Entities in the Polkadot ecosystem need to have a way to manage their funds and other operations in a secure and efficient way. Multisig accounts are a common way to achieve this. Entities by definition change over time, members of the entity may change, threshold requirements may change, and the multisig account may need to be deleted. For even more enhanced hierarchical control, the multisig account may need to be controlled by other multisig accounts.
Current native solutions for multisig operations are less optimal, performance-wise (as we'll explain later in the RFC), and lack fine-grained control over the multisig account.
and much more...
I've created the stateful multisig pallet during my studies in Polkadot Blockchain Academy under supervision from @shawntabrizi and @ank4n. After that, I've enhanced it to be fully functional and this is a draft PR#3300 in polkadot-sdk. I'll list all the details and design decisions in the following sections. Note that the PR is not 1-1 exactly to the current RFC as the RFC is a more polished version of the PR after updating based on the feedback and discussions.
Let's start with a sequence diagram to illustrate the main operations of the Stateful Multisig.
Standard audit/review requirements apply.
Doing back of the envelop calculation to proof that the stateful multisig is more efficient than the stateless multisig given it's smaller footprint size on blocks.
Quick review over the extrinsics for both as it affects the block size:
Stateless Multisig: @@ -9357,17 +9770,17 @@ We have the following extrinsics:
So even though the stateful multisig has a larger state size, it's still more efficient in terms of block size and total footprint on the blockchain.
The Stateful Multisig will have better ergonomics for managing multisig accounts for both developers and end-users.
This RFC is compatible with the existing implementation and can be handled via upgrades and migration. It's not intended to replace the existing multisig pallet.
multisig pallet in polkadot-sdk
This proposes to increase the maximum length of PGP Fingerprint values from a 20 bytes/chars limit to a 40 bytes/chars limit.
Pretty Good Privacy (PGP) Fingerprints are shorter versions of their corresponding Public Key that may be printed on a business card.
They may be used by someone to validate the correct corresponding Public Key.
The maximum length of identity PGP Fingerprint values should be increased from the current 20 bytes/chars limit at least a 40 bytes/chars limit to support PGP Fingerprints and GPG Fingerprints.
If a user tries to setting an on-chain identity by creating an extrinsic using Polkadot.js with identity > setIdentity(info), then if they try to provide their 40 character long PGP Fingerprint or GPG Fingerprint, which is longer than the maximum length of 20 bytes/chars [u8;20], then they will encounter this error:
identity
setIdentity(info)
[u8;20]
createType(Call):: Call: failed decoding identity.setIdentity:: Struct: failed on args: {...}:: Struct: failed on pgpFingerprint: Option<[u8;20]>:: Expected input with 20 bytes (160 bits), found 40 bytes
Increasing maximum length of identity PGP Fingerprint values from the current 20 bytes/chars limit to at least a 40 bytes/chars limit would overcome these errors and support PGP Fingerprints and GPG Fingerprints, satisfying the solution requirements.
No drawbacks have been identified.
Implementations would be tested for adherance by checking that 40 bytes/chars PGP Fingerprints are supported.
No effect on security or privacy has been identified than already exists.
No implementation pitfalls have been identified.
It would be an optimization, since the associated exposed interfaces to developers and end-users could start being used.
To minimize additional overhead the proposal suggests a 40 bytes/chars limit since that would at least provide support for PGP Fingerprints, satisfying the solution requirements.
No potential ergonomic optimizations have been identified.
Updates to Polkadot.js Apps, API and its documentation and those referring to it may be required.
No prior articles or references.
No further questions at this stage.
Relates to RFC entitled "Increase maximum length of identity raw data values from 32 bytes".
This proposes to require a slashable deposit in the broker pallet when initially purchasing or renewing Bulk Coretime or Instantaneous Coretime cores.
Additionally, it proposes to record a reputational status based on the behavior of the purchaser, as it relates to their use of Kusama Coretime cores that they purchase, and to possibly reserve a proportion of the cores for prospective purchasers that have an on-chain identity.
There are sales of Kusama Coretime cores that are scheduled to occur later this month by Coretime Marketplace Lastic.xyz initially in limited quantities, and potentially also by RegionX in future that is subject to their Polkadot referendum #582. This poses a risk in that some Kusama Coretime core purchasers may buy Kusama Coretime cores when they have no intention of actually placing a workload on them or leasing them out, which would prevent those that wish to purchase and actually use Kusama Coretime cores from being able to use any at cores at all.
Reputation. To disincentivise certain behaviours, a reputational status indicator could be used to record the historic behavior of the purchaser and whether on-chain judgement has determined they have adequately rectified that behaviour, as it relates to their usage of Kusama Coretime cores that they purchase.
The slashable deposit if set too high, may result in an economic impact, where less Kusama Coretime core sales are purchased.
Lack of a slashable deposit in the Broker pallet is a security concern, since it exposes Kusama Coretime sales to potential abuse.
Reserving a proportion of Kusama Coretime sales cores for those with on-chain identities should not be to the exclusion of accounts that wish to remain anonymous or cause cores to be wasted unnecessarily. As such, if cores that are reserved for on-chain identities remain unsold then they should be released to anonymous accounts that are on a waiting list.
It should improve performance as it reduces the potential for state bloat since there is less risk of undesirable Kusama Coretime sales activity that would be apparent with no requirement for a slashable deposit or there being no reputational risk to purchasers that waste or misuse Kusama Coretime cores.
The solution proposes to minimize the risk of some Kusama Coretime cores not even being used or leased to perform any tasks at all.
It will be important to monitor and manage the slashable deposits, purchaser reputations, and utilization of the proportion of cores that are reserved for accounts with an on-chain identity.
The mechanism for setting a slashable deposit amount, should avoid undue complexity for users.
No prior articles.
This RFC proposes a new pallet_inflation to be added to the Polkadot runtime, which improves inflation machinery of the Polkadot relay chain in a number of ways:
pallet_inflation
The existing inflation logic in the relay chain suffers from a number of drawbacks:
This RFC is relevant to the following stakeholders, listed from high to low impact:
First, let's further elaborate on the existing order. The current inflation logic is deeply nested in pallet_staking, and pallet_staking::Config::EraPayout interface. Through this trait, the @@ -9782,7 +10195,7 @@ prefixed by dynamic_params.
pallet_staking
pallet_staking::Config::EraPayout
dynamic_params
Whereby FixedAnnualInflationAmount is the fixed absolute value (as opposed to ratio) by which the chain inflates annually, for example 100m DOTs.
FixedAnnualInflationAmount
The following drawbacks are noted:
The new pallet_inflation, among its integration into pallet_staking must be thoroughly audited and reviewed by fellows. We also emphasize on simulating the actual inflation logic using the real polkadot state with Chopsticks and try-runtime.
The proposed system in this RFC implies a handful of extra storage reads and writes "per inflation cycle", but given that a reasonable instance of this pallet would probably decide to inflation eg. once per day, the performance impact is negligible.
The drawback section above noted some ergonomic concerns.
The "New Order" section above notes the compatibility notes with the existing staking and inflation system.
pallet_parameters
This RFC proposes the addition of a secondary market feature to either the broker pallet or as a separate pallet maintained by Lastic, enabling users to list and purchase regions. This includes creating, purchasing, and removing listings, as well as emitting relevant events and handling associated errors.
Currently, the broker pallet lacks functionality for a secondary market, which limits users' ability to freely trade regions. This RFC aims to introduce a secure and straightforward mechanism for users to list regions they own for sale and allow other users to purchase these regions.
While integrating this functionality directly into the broker pallet is one option, another viable approach is to implement it as a separate pallet maintained by Lastic. This separate pallet would have access to the broker pallet and add minimal functionality necessary to support the secondary market.
Adding smart contracts to the Coretime chain could also address this need; however, this process is expected to be lengthy and complex. We cannot afford to wait for this extended timeline to enable basic secondary market functionality. By proposing either integration into the broker pallet or the creation of a dedicated pallet, we can quickly enhance the flexibility and utility of the broker pallet, making it more user-friendly and valuable.
Primary stakeholders include:
This RFC introduces the following key features:
The main drawback of adding the additional complexity directly to the broker pallet is the potential increase in maintenance overhead. Therefore, we propose adding additional functionality as a separate pallet on the Coretime chain. To take the pressure off from implementing these features, implementation along with unit tests would be taken care of by Lastic (Aurora Makovac, Philip Lucsok).
There are potential risks of security vulnerabilities in the new market functionalities, such as unauthorized region transfers or incorrect balance adjustments. Therefore, extensive security measures would have to be implemented.
This RFC proposes the integration of smart contracts on the Coretime chain to enhance flexibility and enable complex decentralized applications, including secondary market functionalities.
Currently, the Coretime chain lacks the capability to support smart contracts, which limits the range of decentralized applications that can be developed and deployed. By enabling smart contracts, the Coretime chain can facilitate more sophisticated functionalities such as automated region trading, dynamic pricing mechanisms, and other decentralized applications that require programmable logic. This will enhance the utility of the Coretime chain, attract more developers, and create more opportunities for innovation.
Additionally, while there is a proposal (#885) to allow EVM-compatible contracts on Polkadot’s Asset Hub, the implementation of smart contracts directly on the Coretime chain will provide synchronous interactions and avoid the complexities of asynchronous operations via XCM.
This RFC introduces the following key components:
There are several drawbacks to consider:
The SetFeesMode instruction and the fees_mode register allow for the existence of JIT withdrawal. JIT withdrawal complicates the fee mechanism and leads to bugs and unexpected behaviour. The proposal is to remove said functionality. Another effort to simplify fee handling in XCM.
SetFeesMode
fees_mode
The JIT withdrawal mechanism creates bugs such as not being able to get fees when all assets are put into holding and none left in the origin location. This is a confusing behavior, since there are funds for fees, just not where the XCVM wants them. The XCVM should have only one entrypoint to fee payment, the holding register. That way there is also less surface for bugs.
The SetFeesMode instruction will be removed. The Fees Mode register will be removed.
Fees Mode
Users will have to make sure to put enough assets in WithdrawAsset when previously some things might have been charged directly from their accounts. This leads to a more predictable behaviour though so it will only be a drawback for the minority of users.
WithdrawAsset
Implementations and benchmarking must change for most existing pallet calls that send XCMs to other locations.
Performance will be improved since unnecessary checks will be avoided.
JIT withdrawal was a way of side-stepping the regular flow of XCM programs. By removing it, the spec is simplified but now old use-cases have to work with the original intended behaviour, which may result in more implementation work.
Ergonomics for users will undoubtedly improve since the system is more predictable.
Existing programs in the ecosystem will break. The instruction should be deprecated as soon as this RFC is approved (but still fully supported), then removed in a subsequent XCM version (probably deprecate in v5, remove in v6).
The previous RFC PR on the xcm-format repo, before XCM RFCs were moved to fellowship RFCs: https://github.com/polkadot-fellows/xcm-format/pull/57.
The new generic fees mechanism is related to this proposal and further stimulates it as the JIT withdraw fees mechanism will become useless anyway.
This RFC proposes compressing the state response message during the state syncing process to reduce the amount of data transferred.
State syncing can require downloading several gigabytes of data, particularly for blockchains with large state sizes, such as Astar, which has a state size exceeding 5 GiB (https://github.com/AstarNetwork/Astar/issues/1110). This presents a significant challenge for nodes with slower network connections. Additionally, the current state sync implementation lacks a persistence feature (https://github.com/paritytech/polkadot-sdk/issues/4), meaning any network disruption forces the node to re-download the entire state, making the process even more difficult.
This RFC benefits all projects utilizing the Substrate framework, specifically in improving the efficiency of state syncing.
The largest portion of the state response message consists of either CompactProof or Vec<KeyValueStateEntry>, depending on whether a proof is requested (source):
CompactProof
Vec<KeyValueStateEntry>
None identified.
The code changes required for this RFC are straightforward: compress the state response on the sender side and decompress it on the receiver side. Existing sync tests should ensure functionality remains intact.
This RFC optimizes network bandwidth usage during state syncing, particularly for blockchains with gigabyte-sized states, while introducing negligible CPU overhead for compression and decompression. For example, compressing the state response during a recent Polkadot warp sync (around height #22076653) reduces the data transferred from 530,310,121 bytes to 352,583,455 bytes — a 33% reduction, saving approximately 169 MiB of data.
Performance data is based on this patch, with logs available here.
No compatibility issues identified.
This is a proposal to reduce the impact of stale nominations in the Polkadot staking system. With this proposal, nominators are incentivized to update or renew their selected validators once per time period. Nominators that do not update or renew their selected validators would be considered stale, and a decaying multiplier would be applied to their nominations, reducing the weight of their nomination and rewards.
Longer motivation behind the content of the RFC, presented as a combination of both problems and requirements for the solution.
One of Polkadot's primary utilities is providing a high quality security layer for applications built on top of it. To achieve this, Polkadot runs a Nominated Proof-of-Stake system, allowing nominators to vote on who they think are the best validators for Polkadot.
This system functions best when nominators and validators are active participants in the network. Nominators should consistently evaluate the quality and preferences of validators, and adjust their nominations accordingly.
Primary stakeholders are:
Detail-heavy explanation of the RFC, suitable for explanation to an implementer of the changeset. This should address corner cases in detail and provide justification behind decisions, and provide rationale for how the design meets the solution requirements.
Description of recognized drawbacks to the approach given in the RFC. Non-exhaustively, drawbacks relating to performance, ergonomics, user experience, security, or privacy.
Describe the the impact of the proposal on these three high-importance areas - how implementations can be tested for adherence, effects that the proposal has on security and privacy per-se, as well as any possible implementation pitfalls which should be clearly avoided.
Is this an optimization or a necessary pessimization? What steps have been taken to minimize additional overhead?
If the proposal alters exposed interfaces to developers or end-users, which types of usage patterns have been optimized for?
Provide references to either prior art or other relevant research for the submitted design.
Describe future work which could be enabled by this RFC, if it were accepted, as well as related RFCs. This is a place to brain-dump and explore possibilities, which themselves may become their own RFCs.