Closes#2160
First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)
Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.
Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)
Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
- Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
- Signed transactions (with a hardcoded signature).
- General transactions (without a hardcoded signature).
`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.
There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).
Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.
For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.
## Code Migration
### NOW: Getting it to build
Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:
```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
/* snip */
MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```
After:
```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
/* snip */
AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```
You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let extra: SignedExtra = (
/* snip */
MySpecialSignedExtension::new(/* snip */),
);
let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
extra,
)
}
```
After:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let tx_ext: TxExtension = (
/* snip */
MySpecialSignedExtension::new(/* snip */).into(),
);
let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
tx_ext,
)
}
```
### SOON: Migrating to `TransactionExtension`
Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.
- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.
#### `TransactionExtensionBase`
This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.
#### `TransactionExtension`
Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.
Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.
Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)
Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.
If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.
## TODO
- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
- [x] `ChargeTransactionPayment`
- [x] `DummyExtension`
- [x] `ChargeAssetTxPayment` (asset-tx-payment)
- [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
- [x] `CheckWeight`
- [x] `CheckTxVersion`
- [x] `CheckSpecVersion`
- [x] `CheckNonce`
- [x] `CheckNonZeroSender`
- [x] `CheckMortality`
- [x] `CheckGenesis`
- [x] `CheckOnlySudoAccount`
- [x] `WatchDummy`
- [x] `PrevalidateAttests`
- [x] `GenericSignedExtension`
- [x] `SignedExtension` (chain-polkadot-bulletin)
- [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
- [ ]
- [x] Fix any broken tests.
---------
Signed-off-by: georgepisaltu <george.pisaltu@parity.io>
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Signed-off-by: Alexandru Gheorghe <alexandru.gheorghe@parity.io>
Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>
Co-authored-by: Nikhil Gupta <17176722+gupnik@users.noreply.github.com>
Co-authored-by: georgepisaltu <52418509+georgepisaltu@users.noreply.github.com>
Co-authored-by: Chevdor <chevdor@users.noreply.github.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Maciej <maciej.zyszkiewicz@parity.io>
Co-authored-by: Javier Viola <javier@parity.io>
Co-authored-by: Marcin S. <marcin@realemail.net>
Co-authored-by: Tsvetomir Dimitrov <tsvetomir@parity.io>
Co-authored-by: Javier Bullrich <javier@bullrich.dev>
Co-authored-by: Koute <koute@users.noreply.github.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: Vladimir Istyufeev <vladimir@parity.io>
Co-authored-by: Ross Bulat <ross@parity.io>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Svyatoslav Nikolsky <svyatonik@gmail.com>
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: s0me0ne-unkn0wn <48632512+s0me0ne-unkn0wn@users.noreply.github.com>
Co-authored-by: ordian <write@reusable.software>
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexander Samusev <41779041+alvicsam@users.noreply.github.com>
Co-authored-by: Julian Eager <eagr@tutanota.com>
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: yjh <yjh465402634@gmail.com>
Co-authored-by: Tom Mi <tommi@niemi.lol>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <79228812+paradox-tt@users.noreply.github.com>
Co-authored-by: Bastian Köcher <info@kchr.de>
Co-authored-by: Joshy Orndorff <JoshOrndorff@users.noreply.github.com>
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
Co-authored-by: PG Herveou <pgherveou@gmail.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Juan Girini <juangirini@gmail.com>
Co-authored-by: bader y <ibnbassem@gmail.com>
Co-authored-by: James Wilson <james@jsdw.me>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
Co-authored-by: Parth <desaiparth08@gmail.com>
Co-authored-by: Andrew Jones <ascjones@gmail.com>
Co-authored-by: Jonathan Udd <jonathan@dwellir.com>
Co-authored-by: Serban Iorga <serban@parity.io>
Co-authored-by: Egor_P <egor@parity.io>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Evgeny Snitko <evgeny@parity.io>
Co-authored-by: Just van Stam <vstam1@users.noreply.github.com>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
Co-authored-by: dzmitry-lahoda <dzmitry@lahoda.pro>
Co-authored-by: zhiqiangxu <652732310@qq.com>
Co-authored-by: Nazar Mokrynskyi <nazar@mokrynskyi.com>
Co-authored-by: Anwesh <anweshknayak@gmail.com>
Co-authored-by: cheme <emericchevalier.pro@gmail.com>
Co-authored-by: Sam Johnson <sam@durosoft.com>
Co-authored-by: kianenigma <kian@parity.io>
Co-authored-by: Jegor Sidorenko <5252494+jsidorenko@users.noreply.github.com>
Co-authored-by: Muharem <ismailov.m.h@gmail.com>
Co-authored-by: joepetrowski <joe@parity.io>
Co-authored-by: Alexandru Gheorghe <49718502+alexggh@users.noreply.github.com>
Co-authored-by: Gabriel Facco de Arruda <arrudagates@gmail.com>
Co-authored-by: Squirrel <gilescope@gmail.com>
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com>
Co-authored-by: georgepisaltu <george.pisaltu@parity.io>
Co-authored-by: command-bot <>
If an XCM execution fails or ends with leftover assets, these will be
trapped.
In order to claim them, a custom XCM has to be executed, with the
`ClaimAsset` instruction.
However, arbitrary XCM execution is not allowed everywhere yet and XCM
itself is still not easy enough to use for users out there with trapped
assets.
This new extrinsic in `pallet-xcm` will allow these users to easily
claim their assets, without concerning themselves with writing arbitrary
XCMs.
Part of fixing https://github.com/paritytech/polkadot-sdk/issues/3495
---------
Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
This MR is the merge of
https://github.com/paritytech/substrate/pull/14414 and
https://github.com/paritytech/substrate/pull/14275. It implements
[RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
https://github.com/paritytech/polkadot-sdk/issues/198.
-----
This Merge request introduces three major topicals:
1. Multi-Block-Migrations
1. New pallet `poll` hook for periodic service work
1. Replacement hooks for `on_initialize` and `on_finalize` in cases
where `poll` cannot be used
and some more general changes to FRAME.
The changes for each topical span over multiple crates. They are listed
in topical order below.
# 1.) Multi-Block-Migrations
Multi-Block-Migrations are facilitated by creating `pallet_migrations`
and configuring `System::Config::MultiBlockMigrator` to point to it.
Executive picks this up and triggers one step of the migrations pallet
per block.
The chain is in lockdown mode for as long as an MBM is ongoing.
Executive does this by polling `MultiBlockMigrator::ongoing` and not
allowing any transaction in a block, if true.
A MBM is defined through trait `SteppedMigration`. A condensed version
looks like this:
```rust
/// A migration that can proceed in multiple steps.
pub trait SteppedMigration {
type Cursor: FullCodec + MaxEncodedLen;
type Identifier: FullCodec + MaxEncodedLen;
fn id() -> Self::Identifier;
fn max_steps() -> Option<u32>;
fn step(
cursor: Option<Self::Cursor>,
meter: &mut WeightMeter,
) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
}
```
`pallet_migrations` can be configured with an aggregated tuple of these
migrations. It then starts to migrate them one-by-one on the next
runtime upgrade.
Two things are important here:
- 1. Doing another runtime upgrade while MBMs are ongoing is not a good
idea and can lead to messed up state.
- 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
otherwise it is not used.**
The pallet supports an `UpgradeStatusHandler` that can be used to notify
external logic of upgrade start/finish (for example to pause XCM
dispatch).
Error recovery is very limited in the case that a migration errors or
times out (exceeds its `max_steps`). Currently the runtime dev can
decide in `FailedMigrationHandler::failed` how to handle this. One
follow-up would be to pair this with the `SafeMode` pallet and enact
safe mode when an upgrade fails, to allow governance to rescue the
chain. This is currently not possible, since governance is not
`Mandatory`.
## Runtime API
- `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
inform the Block Author whether they can push transactions.
### Integration
Add it to your runtime implementation of `Core` and `BlockBuilder`:
```patch
diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
@@ impl_runtime_apis! {
impl sp_block_builder::Core<Block> for Runtime {
- fn initialize_block(header: &<Block as BlockT>::Header) {
+ fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
Executive::initialize_block(header)
}
...
}
```
# 2.) `poll` hook
A new pallet hook is introduced: `poll`. `Poll` is intended to replace
mostly all usage of `on_initialize`.
The reason for this is that any code that can be called from
`on_initialize` cannot be migrated through an MBM. Currently there is no
way to statically check this; the implication is to use `on_initialize`
as rarely as possible.
Failing to do so can result in broken storage invariants.
The implementation of the poll hook depends on the `Runtime API` changes
that are explained above.
# 3.) Hard-Deadline callbacks
Three new callbacks are introduced and configured on `System::Config`:
`PreInherents`, `PostInherents` and `PostTransactions`.
These hooks are meant as replacement for `on_initialize` and
`on_finalize` in cases where the code that runs cannot be moved to
`poll`.
The reason for this is to make the usage of HD-code (hard deadline) more
explicit - again to prevent broken invariants by MBMs.
# 4.) FRAME (general changes)
## `frame_system` pallet
A new memorize storage item `InherentsApplied` is added. It is used by
executive to track whether inherents have already been applied.
Executive and can then execute the MBMs directly between inherents and
transactions.
The `Config` gets five new items:
- `SingleBlockMigrations` this is the new way of configuring migrations
that run in a single block. Previously they were defined as last generic
argument of `Executive`. This shift is brings all central configuration
about migrations closer into view of the developer (migrations that are
configured in `Executive` will still work for now but is deprecated).
- `MultiBlockMigrator` this can be configured to an engine that drives
MBMs. One example would be the `pallet_migrations`. Note that this is
only the engine; the exact MBMs are injected into the engine.
- `PreInherents` a callback that executes after `on_initialize` but
before inherents.
- `PostInherents` a callback that executes after all inherents ran
(including MBMs and `poll`).
- `PostTransactions` in symmetry to `PreInherents`, this one is called
before `on_finalize` but after all transactions.
A sane default is to set all of these to `()`. Example diff suitable for
any chain:
```patch
@@ impl frame_system::Config for Test {
type MaxConsumers = ConstU32<16>;
+ type SingleBlockMigrations = ();
+ type MultiBlockMigrator = ();
+ type PreInherents = ();
+ type PostInherents = ();
+ type PostTransactions = ();
}
```
An overview of how the block execution now looks like is here. The same
graph is also in the rust doc.
<details><summary>Block Execution Flow</summary>
<p>
</p>
</details>
## Inherent Order
Moved to https://github.com/paritytech/polkadot-sdk/pull/2154
---------------
## TODO
- [ ] Check that `try-runtime` still works
- [ ] Ensure backwards compatibility with old Runtime APIs
- [x] Consume weight correctly
- [x] Cleanup
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Juan Girini <juangirini@gmail.com>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Gavin Wood <gavin@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
## Problem
During the bumping of the `polkadot-fellows` repository to
`polkadot-sdk@1.6.0`, I encountered a situation where the benchmarks
`teleport_assets` and `reserve_transfer_assets` in AssetHubKusama
started to fail. This issue arose due to a decreased ED balance for
AssetHubs introduced
[here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213),
and also because of a [missing CI
pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to
check the benchmarks, which went unnoticed.
These benchmarks expect the `caller` to have enough:
1. balance to transfer (BTT)
2. balance for paying delivery (BFPD).
So the initial balance was calculated as `ED * 100`, which seems
reasonable:
```
const ED_MULTIPLIER: u32 = 100;
let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());`
```
The problem arises when the price for delivery is 100 times higher than
the existential deposit. In other words, when `ED * 100` does not cover
`BTT` + `BFPD`.
I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama
```
ED: 3333333
calculated price to parent delivery: 1031666634 (from xcm logs from the benchmark)
---
3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667
```
which results in the error;
```
2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") })
Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet")
```
## Solution
The benchmarks `teleport_assets` and `reserve_transfer_assets` were
fixed by removing `ED * 100` and replacing it with `DeliveryHelper`
logic, which calculates the (almost real) price for delivery and sets it
along with the existential deposit as the initial balance for the
account used in the benchmark.
## TODO
- [ ] patch for 1.6 -
https://github.com/paritytech/polkadot-sdk/pull/3466
- [ ] patch for 1.7 -
https://github.com/paritytech/polkadot-sdk/pull/3465
- [ ] patch for 1.8 - TODO: PR
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Add a `ApiVersion` constant to the pallet-contracts Config to
communicate with developers the current state of the host functions
exposed by the pallet
I found out during the cleanup of this deprecation message in the
`polkadot-fellows` repository that we deprecated `CurrencyAdapter`
without making the recommended changes.
## TODO
- [ ] fix `polkadot-fellows` bump to 1.6.0
https://github.com/polkadot-fellows/runtimes/pull/159
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
It's a follow-up of #2949. It enables the lookahead collator to
dynamically adjust the aura slot size, which may change during the
runtime upgrade. It also addressed a couple of issues with time
constants I missed in the original PR.
Good news: it works. The parachain successfully switches from sync
backing with 12s slots to async backing with 6s slots.
Bad news: during the transitional period of a single block in which the
actual runtime upgrade is performed, it still gets the old slot duration
of 12s (as it gets it from the best block), resulting in a runtime panic
(logs follow). That doesn't affect the following block production of the
parachain. Ideas on how to improve the situation are appreciated.
<details>
```
2024-02-05 12:59:36.373 INFO tokio-runtime-worker sc_basic_authorship::basic_authorship: [Parachain] 🙌 Starting consensus session on top of parent 0x6fd2d8f904f12c22531bfabf77b16dc84a6a29e45d9ae358aa6547fbf3f0438b
2024-02-05 12:59:36.373 ERROR tokio-runtime-worker runtime: [Parachain] panicked at /home/s0me0ne/wrk/parity/polkadot-sdk/cumulus/pallets/aura-ext/src/consensus_hook.rs:69:9:
assertion `left == right` failed: slot number mismatch
left: Slot(142261198)
right: Slot(284522396)
2024-02-05 12:59:36.373 WARN tokio-runtime-worker sp_state_machine::overlayed_changes::changeset: [Parachain] 1 storage transactions are left open by the runtime. Those will be rolled back.
2024-02-05 12:59:36.373 WARN tokio-runtime-worker sp_state_machine::overlayed_changes::changeset: [Parachain] 1 storage transactions are left open by the runtime. Those will be rolled back.
2024-02-05 12:59:36.373 WARN tokio-runtime-worker basic-authorship: [Parachain] ❗ Inherent extrinsic returned unexpected error: Error at calling runtime api: Execution failed: Execution aborted due to trap: wasm trap: wasm `unreachable` instruction executed
WASM backtrace:
error while executing at wasm backtrace:
0: 0x4e4a3b - <unknown>!rust_begin_unwind
1: 0x46cf57 - <unknown>!core::panicking::panic_fmt::h3c280dba88683724
2: 0x46d238 - <unknown>!core::panicking::assert_failed_inner::hebac5970933beb4d
3: 0x3d00fc - <unknown>!core::panicking::assert_failed::h640a47e2fb5dfb4b
4: 0xd0db3 - <unknown>!frame_support::storage::transactional::with_transaction::hcbc31515f81b2ee1
5: 0x34d654 - <unknown>!<cumulus_pallet_parachain_system::pallet::Call<T> as frame_support::traits::dispatch::UnfilteredDispatchable>::dispatch_bypass_filter::{{closure}}::hb7c2c9a11fa88301
6: 0x3547db - <unknown>!environmental::local_key::LocalKey<T>::with::h783f2605ae27d6d3
7: 0x7f454 - <unknown>!<asset_hub_rococo_runtime::RuntimeCall as frame_support::traits::dispatch::UnfilteredDispatchable>::dispatch_bypass_filter::h5e11a01ab97c06c7
8: 0x7f237 - <unknown>!<asset_hub_rococo_runtime::RuntimeCall as sp_runtime::traits::Dispatchable>::dispatch::h7f8ae4a8fede71ca
9: 0x26a0f3 - <unknown>!frame_executive::Executive<System,Block,Context,UnsignedValidator,AllPalletsWithSystem,COnRuntimeUpgrade>::apply_extrinsic::h75e524ff34738391
10: 0x282211 - <unknown>!BlockBuilder_apply_extrinsic. Dropping.
2024-02-05 12:59:36.374 ERROR tokio-runtime-worker runtime: [Parachain] panicked at /home/s0me0ne/wrk/parity/polkadot-sdk/substrate/frame/aura/src/lib.rs:416:9:
assertion `left == right` failed: Timestamp slot must match `CurrentSlot`
left: Slot(142261198)
right: Slot(284522396)
2024-02-05 12:59:36.374 WARN tokio-runtime-worker sp_state_machine::overlayed_changes::changeset: [Parachain] 1 storage transactions are left open by the runtime. Those will be rolled back.
2024-02-05 12:59:36.374 WARN tokio-runtime-worker sp_state_machine::overlayed_changes::changeset: [Parachain] 1 storage transactions are left open by the runtime. Those will be rolled back.
2024-02-05 12:59:36.374 WARN tokio-runtime-worker basic-authorship: [Parachain] ❗ Inherent extrinsic returned unexpected error: Error at calling runtime api: Execution failed: Execution aborted due to trap: wasm trap: wasm `unreachable` instruction executed
WASM backtrace:
error while executing at wasm backtrace:
0: 0x4e4a3b - <unknown>!rust_begin_unwind
1: 0x46cf57 - <unknown>!core::panicking::panic_fmt::h3c280dba88683724
2: 0x46d238 - <unknown>!core::panicking::assert_failed_inner::hebac5970933beb4d
3: 0x3d00fc - <unknown>!core::panicking::assert_failed::h640a47e2fb5dfb4b
4: 0x9ece6 - <unknown>!frame_support::storage::transactional::with_transaction::h26f75cb9f9462088
5: 0x356d7e - <unknown>!environmental::local_key::LocalKey<T>::with::hbcf2d4e17b48fdb5
6: 0x7f507 - <unknown>!<asset_hub_rococo_runtime::RuntimeCall as frame_support::traits::dispatch::UnfilteredDispatchable>::dispatch_bypass_filter::h5e11a01ab97c06c7
7: 0x7f237 - <unknown>!<asset_hub_rococo_runtime::RuntimeCall as sp_runtime::traits::Dispatchable>::dispatch::h7f8ae4a8fede71ca
8: 0x26a0f3 - <unknown>!frame_executive::Executive<System,Block,Context,UnsignedValidator,AllPalletsWithSystem,COnRuntimeUpgrade>::apply_extrinsic::h75e524ff34738391
9: 0x282211 - <unknown>!BlockBuilder_apply_extrinsic. Dropping.
2024-02-05 12:59:36.374 DEBUG tokio-runtime-worker runtime::xcmp-queue-migration: [Parachain] Lazy migration finished: item gone
2024-02-05 12:59:36.374 ERROR tokio-runtime-worker runtime: [Parachain] panicked at /home/s0me0ne/wrk/parity/polkadot-sdk/cumulus/pallets/parachain-system/src/lib.rs:265:18:
set_validation_data inherent needs to be present in every block!
2024-02-05 12:59:36.374 ERROR tokio-runtime-worker aura::cumulus: [Parachain] err=Error { inner: Proposing
Caused by:
0: Error at calling runtime api: Execution failed: Execution aborted due to trap: wasm trap: wasm `unreachable` instruction executed
WASM backtrace:
error while executing at wasm backtrace:
0: 0x4e4a3b - <unknown>!rust_begin_unwind
1: 0x46cf57 - <unknown>!core::panicking::panic_fmt::h3c280dba88683724
2: 0x46da8b - <unknown>!core::option::expect_failed::hdf18d99c3adabca7
3: 0x2134cb - <unknown>!<cumulus_pallet_parachain_system::pallet::Pallet<T> as frame_support::traits::hooks::OnFinalize<<<<T as frame_system::pallet::Config>::Block as sp_runtime::traits::HeaderProvider>::HeaderT as sp_runtime::traits::Header>::Number>>::on_finalize::hf98aac39802896ba
4: 0x26a9d6 - <unknown>!frame_executive::Executive<System,Block,Context,UnsignedValidator,AllPalletsWithSystem,COnRuntimeUpgrade>::idle_and_finalize_hook::h32775c0df0749d92
5: 0x26ad9f - <unknown>!frame_executive::Executive<System,Block,Context,UnsignedValidator,AllPalletsWithSystem,COnRuntimeUpgrade>::finalize_block::h15e5a1a6b9ca8032
6: 0x2822bd - <unknown>!BlockBuilder_finalize_block
1: Execution failed: Execution aborted due to trap: wasm trap: wasm `unreachable` instruction executed
WASM backtrace:
error while executing at wasm backtrace:
0: 0x4e4a3b - <unknown>!rust_begin_unwind
1: 0x46cf57 - <unknown>!core::panicking::panic_fmt::h3c280dba88683724
2: 0x46da8b - <unknown>!core::option::expect_failed::hdf18d99c3adabca7
3: 0x2134cb - <unknown>!<cumulus_pallet_parachain_system::pallet::Pallet<T> as frame_support::traits::hooks::OnFinalize<<<<T as frame_system::pallet::Config>::Block as sp_runtime::traits::HeaderProvider>::HeaderT as sp_runtime::traits::Header>::Number>>::on_finalize::hf98aac39802896ba
4: 0x26a9d6 - <unknown>!frame_executive::Executive<System,Block,Context,UnsignedValidator,AllPalletsWithSystem,COnRuntimeUpgrade>::idle_and_finalize_hook::h32775c0df0749d92
5: 0x26ad9f - <unknown>!frame_executive::Executive<System,Block,Context,UnsignedValidator,AllPalletsWithSystem,COnRuntimeUpgrade>::finalize_block::h15e5a1a6b9ca8032
6: 0x2822bd - <unknown>!BlockBuilder_finalize_block }
```
</details>
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace
Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.
I am using a tool to do this, so its mostly a test to see that it works
as expected.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
## Problem
The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.
It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.
**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
/// from pallet_nis
#[pallet::composite_enum]
pub enum HoldReason {
NftReceipt,
}
/// from pallet_preimage
#[pallet::composite_enum]
pub enum HoldReason {
Preimage,
}
// from pallet_state-trie-migration
#[pallet::composite_enum]
pub enum HoldReason {
SlashForContinueMigrate,
SlashForMigrateCustomTop,
SlashForMigrateCustomChild,
}
```
- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {
#[codec(index = 32u8)]
Preimage(pallet_preimage::HoldReason),
#[codec(index = 38u8)]
Nis(pallet_nis::HoldReason),
#[codec(index = 42u8)]
StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```
- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)
However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
```
// pseudo-code - if we try to call all of these:
T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;
// With `type MaxHolds = ConstU32<3>` these two will fail
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
```
## Solutions
A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.
The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {
#[pallet::composite_enum]
pub enum HoldReason {
ModuleSingleInstanceReason1,
ModuleSingleInstanceReason2,
}
...
}
#[frame_support::pallet(dev_mode)]
mod module_multi_instance {
#[pallet::composite_enum]
pub enum HoldReason<I: 'static = ()> {
ModuleMultiInstanceReason1,
ModuleMultiInstanceReason2,
ModuleMultiInstanceReason3,
}
...
}
impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
for RuntimeHoldReason
{
const VARIANT_COUNT: u32 = 0
+ module_single_instance::HoldReason::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```
In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.
## For reviewers
Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs`
- `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
- `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`
And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`
## Next steps
Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.
---------
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
The `parachains-common` contains a lots of constants and type
definitions which are used for `polkadot-sdk`'s testnet runtimes and
also for `polkadot-fellows`'s production [SP
runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants).
This PR cleans `parachains-common` module to contain only common and
generic functionality.
Testnet-specific constants have been moved to the separate module
dedicated just for testnets:
`polkadot-sdk/cumulus/parachains/runtimes/constants/`
Part of: https://github.com/paritytech/polkadot-sdk/issues/3054
---------
Co-authored-by: georgepisaltu <george.pisaltu@parity.io>
Reverts paritytech/polkadot-sdk#2302. 🤦♂️ should have checked the
migration CI first.
We either need to reduce the `max_message_size` for the open HRMP
channels on the failing chains or increase the `PageSize` of the XCMP
queue.
Both would be fine on a test-net, but i assume this will also fail
before the next SP runtime upgrade so first need to think what best to
do.
AFAIK its not possible currently to change the `max_message_size` of an
open HRMP channel.
Remove `without_storage_info` from the XCMP queue pallet. Part of
https://github.com/paritytech/polkadot-sdk/issues/323
Changes:
- Limit the number of channels that can be suspended at the same time.
- Limit the number of channels that can have messages or signals pending
at the same time.
A No-OP migration is put in place to ensure that all `BoundedVec`s still
decode and not truncate after upgrade. The storage version is thereby
bumped to 4 to have our tooling remind us to deploy that migration.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
There were several improvements and PRs that didn't apply to all
runtimes, so this PR attempts to align those small differences. In
addition, the PR eliminates unused dependencies across multiple modules.
Relates to PR for `polkadot-fellows`:
https://github.com/polkadot-fellows/runtimes/pull/154
This PR backports version bumps from release branch
`release-polkadot-v1.6.0` back to `master` and also moved `prdoc` files
related to the release to the appropriate folder
# Note for reviewer
Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.
# Description
Added XCMv4.
## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation
In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.
## Removed `Abstract` asset id
It was not being used anywhere and this simplifies the code.
Now assets are just constructed as follows:
```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```
No need for specifying `Concrete` anymore.
## Outcome is now a named fields struct
Instead of
```rust
pub enum Outcome {
Complete(Weight),
Incomplete(Weight, Error),
Error(Error),
}
```
we now have
```rust
pub enum Outcome {
Complete { used: Weight },
Incomplete { used: Weight, error: Error },
Error { error: Error },
}
```
## Added Reanchorable trait
Now both locations and assets implement this trait, making it easier to
reanchor both.
## New syntax for building locations and junctions
Now junctions are built using the following methods:
```rust
let location = Location {
parents: 1,
interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```
or
```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```
And they are matched like so:
```rust
match location.unpack() {
(1, [Parachain(id)]) => ...
(0, Here) => ...,
(1, [_]) => ...,
}
```
This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.
This was needed to make all sizes smaller.
# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id
---------
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
In the move from the old `Currency` traits to the new `fungible/s`
family of traits, we already had the `FungiblesAdapter` and
`NonFungiblesAdapter` for multiple fungible and non fungible assets
respectively. However, for handling only one fungible asset, we were
missing a `FungibleAdapter`, and so used the old `CurrencyAdapter`
instead. This PR aims to fill in that gap, and provide the new adapter
for more updated examples.
I marked the old `CurrencyAdapter` as deprecated as part of this PR, and
I'll change it to the new `FungibleAdapter` in a following PR.
The two stages are separated so as to not bloat this PR with some name
fixes in tests.
---------
Co-authored-by: command-bot <>
We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
We were not filtering for sibling parachains, but for sibling anything
---------
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: command-bot <>
This PR introduces a script and some templates to use the prdoc involved
in a release and build:
- the changelog
- a simple draft of audience documentation
Since the prdoc presence was enforced in the middle of the version
1.5.0, not all PRs did come with a `prdoc` file.
This PR creates all the missing `prdoc` files with some minimum content
allowing to properly generate the changelog.
The generated content is **not** suitable for the audience
documentation.
The audience documentation will be possible with the next version, when
all PR come with a proper `prdoc`.
## Assumptions
- the prdoc files for release `vX.Y.Z` have been moved under
`prdoc/X.Y.Z`
- the changelog requires for now for the prdoc files to contain author +
topic. Thos fields are optional.
The build script can be called as:
```
VERSION=X.Y.Z ./scripts/release/build-changelogs.sh
```
Related:
- #1408
---------
Co-authored-by: EgorPopelyaev <egor@parity.io>
As suggested in this thread:
https://github.com/polkadot-fellows/runtimes/pull/87#discussion_r1400237122
We already have the `IsChildSystemParachain`, which may be used at relay
chain, but it can't be used at a parachain level. So let's use
`AllSiblingSystemParachains` for that. I was thinking about
`AllSystemParachains`, but it may cause wrong impression that it can be
used at a relay chain level.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
# Motivation (+testing)
### Enable easy `ForeignAssets` transfers using `pallet-xcm`
We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?
This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.
This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).
Added `xcm-emulator` tests for this scenario ^.
# Description
Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.
Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.
`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.
- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.
## Review notes
Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.
---------
Co-authored-by: command-bot <>
Removes obsolete fields from the `QueueConfigData` structure. For the
remaining fields, if they use the old defaults, we replace them with the
new defaults.
Resolves: https://github.com/paritytech/polkadot-sdk/issues/1795
Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.
If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html
@ggwpez, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.
TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
see #2189
This PR does the following:
- Bring the user api functions into a new pallet-contracts-uapi (They
are currently defined in ink!
[here])(https://github.com/paritytech/ink/blob/master/crates/env/src/engine/on_chain/ext.rs)
- Add older api versions and unstable to the user api trait.
- Remove pallet-contracts-primitives and bring the types it defined in
uapi / pallet-contracts
- Add the infrastructure to build fixtures from Rust files and test it
works by replacing `dummy.wat` and `call.wat`
- Move all the doc from wasm/runtime.rs to pallet-contracts-uapi.
This will be done in a follow up:
- convert the rest of the test from .wat to rust
- bring risc-v uapi up to date with wasm
- finalize the uapi host fns, making sure everything is codegen from the
source host fns in pallet-contracts
---------
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
## Overview
This PR aligns the `spec_version` formatting to the [recent
changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142)
made for the Polkadot/Kusama runtimes.
It also backports the latest version `v1.4.0` bumps as `1_004_000`.
## Details
During the switch from `v0.9` to `v1.x`, the format of the
`spec_version` was modified from: `(M)m_ppp` for a runtime considered on
version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`.
With the transition to `v1.x`, the format was changed to a bigger number
(still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as
`01_02_003`.
This PR aligns the format with that has been introduced in the
fellowship repo: `MMM_mmm_ppp`.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
Westend Collectives migration CI check can be fixed once we have
https://github.com/paritytech/try-runtime-cli/pull/58, will open another
PR once it is available.
- [x] Remove deprecated `DmpQueue` pallet from Rococo Contracts, the
migration is complete
- [x] Fix Asset Hub Rococo storage versions
- [x] Add migration check CI for Asset Hub Rococo and Westend Bridge Hub
This PR introduces:
- XCM host functions `xcm_send`, `xcm_execute`
- An Xcm trait into the config. that proxy these functions to to
`pallet_xcm`, or disable their usage by using `()`.
- A mock_network and xcm_test files to test the newly added xcm-related
functions.
---------
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
Co-authored-by: Sasha Gryaznov <hi@agryaznov.com>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
## Motivation
`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.
While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.
## Solution
This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.
Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.
All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.
#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).
Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
(imported from https://github.com/paritytech/cumulus/pull/2157)
## Changes
This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.
All System Parachains adopt this change.
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.
### DMP Queue Pallet
The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.
Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:
```rust
parameter_types! {
pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}
impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
type PalletName = DmpQueuePalletName;
type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}
// And adding them to your Migrations tuple:
pub type Migrations = (
...
cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```
### XCMP Queue pallet
Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.
New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;
/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;
/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```
How to configure those:
```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;
// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
ProcessXcmMessage<
AggregateMessageOrigin,
xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
RuntimeCall,
>,
>;
// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```
The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.
Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.
### Parachain System pallet
For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.
XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.
New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing.
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
```
How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
```
## Message Flow
The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.
## Further changes
- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`
Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.
TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966
- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: command-bot <>
This PR addresses several issues:
- simplify referencing `RelayTreasuryLocation` without needing
additional `RelayTreasury` struct
- fix for referencing `SystemParachains` from parachain with `parents:
1` instead of `parents: 0`
- removed hard-coded constants and fix tests for `asset-hub-rococo`
which was merged to master after
https://github.com/paritytech/polkadot-sdk/pull/1726
---------
Co-authored-by: command-bot <>
closes https://github.com/paritytech/polkadot-sdk/issues/1882
## Breaking Changes
This PR introduces a new item to `pallet_balances::Config`:
```diff
trait Config {
++ type RuntimeFreezeReasons;
}
```
This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.
In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.
This requires: https://github.com/paritytech/scale-info/pull/197
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.
This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.
The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.
XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).
# Note for reviewers
Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration
# Important note
After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!
Wallet UIs that want to expose the new delivery fee can do so using the
formula:
```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```
where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).
---------
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Giles Cope <gilescope@gmail.com>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Sergej Sakac