## Problem
During the bumping of the `polkadot-fellows` repository to
`polkadot-sdk@1.6.0`, I encountered a situation where the benchmarks
`teleport_assets` and `reserve_transfer_assets` in AssetHubKusama
started to fail. This issue arose due to a decreased ED balance for
AssetHubs introduced
[here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213),
and also because of a [missing CI
pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to
check the benchmarks, which went unnoticed.
These benchmarks expect the `caller` to have enough:
1. balance to transfer (BTT)
2. balance for paying delivery (BFPD).
So the initial balance was calculated as `ED * 100`, which seems
reasonable:
```
const ED_MULTIPLIER: u32 = 100;
let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());`
```
The problem arises when the price for delivery is 100 times higher than
the existential deposit. In other words, when `ED * 100` does not cover
`BTT` + `BFPD`.
I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama
```
ED: 3333333
calculated price to parent delivery: 1031666634 (from xcm logs from the benchmark)
---
3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667
```
which results in the error;
```
2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") })
Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet")
```
## Solution
The benchmarks `teleport_assets` and `reserve_transfer_assets` were
fixed by removing `ED * 100` and replacing it with `DeliveryHelper`
logic, which calculates the (almost real) price for delivery and sets it
along with the existential deposit as the initial balance for the
account used in the benchmark.
## TODO
- [ ] patch for 1.6 -
https://github.com/paritytech/polkadot-sdk/pull/3466
- [ ] patch for 1.7 -
https://github.com/paritytech/polkadot-sdk/pull/3465
- [ ] patch for 1.8 - TODO: PR
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
- Adds a test to check the correct digest for Snowbridge outbound
messages. For the correct digest to be in the block, the the
MessageQueue pallet should be configured after the EthereumOutbound
queue pallet. The added test fails if the EthereumOutbound is configured
after the MessageQueue pallet.
- Adds a helper method `run_to_block_with_finalize` to simulate the
block finalizing. The existing `run_to_block` method does not finalize
and so it cannot successfully test this condition.
Closes: https://github.com/paritytech/polkadot-sdk/issues/3208
---------
Co-authored-by: claravanstaden <Cats 4 life!>
Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.
```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"
# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix
# And format the changes:
$ taplo format --config .config/taplo.toml
```
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
I found out during the cleanup of this deprecation message in the
`polkadot-fellows` repository that we deprecated `CurrencyAdapter`
without making the recommended changes.
## TODO
- [ ] fix `polkadot-fellows` bump to 1.6.0
https://github.com/polkadot-fellows/runtimes/pull/159
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace
Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.
I am using a tool to do this, so its mostly a test to see that it works
as expected.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Related to https://github.com/paritytech/polkadot-sdk/issues/3242
Reorganizing the bridge zombienet tests in order to:
- separate the environment spawning from the actual tests
- offer better control over the tests and some possibility to
orchestrate them as opposed to running everything from the zndsl file
Only rewrote the asset transfer test using this new "framework". The old
logic and old tests weren't functionally modified or deleted. The plan
is to get feedback on this approach first and if this is agreed upon,
migrate the other 2 tests later in separate PRs and also do other
improvements later.
Removes the `bridges/snowbridge/parachain` directory and moves
everything up to under `snowbridge` directly. We are cleaning up our
local dev env after merging our crates into the polkadot-sdk.
---------
Co-authored-by: claravanstaden <Cats 4 life!>
## TODO
- [x] change constants when CI fails (should fail :) )
## Result
On the AssetHubRococo: 1701175800126 -> 1700929825257 = 0.15 %
decreased.
```
# Before ( [xcm] Fix `SovereignPaidRemoteExporter` and `DepositAsset` handling (#3157))
Feb 02 12:59:05.520 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1701175800126 for runtime: statemine-1006000 (statemine-0.tx14.au1)
# After
Feb 02 13:02:40.647 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1700929825257 for runtime: statemine-1006000 (statemine-0.tx14.au1)
```
On the AssetHubWestend: 2116038876326 -> 1641718372993 = 22.4 %
decreased.
```
# Before ( [xcm] Fix `SovereignPaidRemoteExporter` and `DepositAsset` handling (#3157))
Feb 02 12:56:00.880 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 2116038876326 for runtime: westmint-1006000 (westmint-0.tx14.au1)
# After
Feb 02 13:04:42.515 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1641718372993 for runtime: westmint-1006000 (westmint-0.tx14.au1)
```
This PR addresses two issues:
- It modifies `DepositAsset`'s asset filter from `All` to
`AllCounted(1)` to prevent potentially charging excessive weight/fees.
This adjustment avoids situations where fees could be calculated based
on the count of assets, as illustrated
[here](https://github.com/paritytech/polkadot-sdk/blob/master/cumulus/parachains/runtimes/bridge-hubs/bridge-hub-rococo/src/weights/xcm/mod.rs#L38-L46).
- It encapsulates `DepositAsset` with `SetAppendix` to ensure that
`fees` are not trapped in any case. For instance, this prevents issues
when `ExportXcm::validate` encounters an error during the processing of
`ExportMessage`.
I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
## Problem
The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.
It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.
**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
/// from pallet_nis
#[pallet::composite_enum]
pub enum HoldReason {
NftReceipt,
}
/// from pallet_preimage
#[pallet::composite_enum]
pub enum HoldReason {
Preimage,
}
// from pallet_state-trie-migration
#[pallet::composite_enum]
pub enum HoldReason {
SlashForContinueMigrate,
SlashForMigrateCustomTop,
SlashForMigrateCustomChild,
}
```
- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {
#[codec(index = 32u8)]
Preimage(pallet_preimage::HoldReason),
#[codec(index = 38u8)]
Nis(pallet_nis::HoldReason),
#[codec(index = 42u8)]
StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```
- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)
However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
```
// pseudo-code - if we try to call all of these:
T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;
// With `type MaxHolds = ConstU32<3>` these two will fail
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
```
## Solutions
A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.
The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {
#[pallet::composite_enum]
pub enum HoldReason {
ModuleSingleInstanceReason1,
ModuleSingleInstanceReason2,
}
...
}
#[frame_support::pallet(dev_mode)]
mod module_multi_instance {
#[pallet::composite_enum]
pub enum HoldReason<I: 'static = ()> {
ModuleMultiInstanceReason1,
ModuleMultiInstanceReason2,
ModuleMultiInstanceReason3,
}
...
}
impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
for RuntimeHoldReason
{
const VARIANT_COUNT: u32 = 0
+ module_single_instance::HoldReason::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```
In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.
## For reviewers
Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs`
- `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
- `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`
And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`
## Next steps
Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.
---------
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
The `parachains-common` contains a lots of constants and type
definitions which are used for `polkadot-sdk`'s testnet runtimes and
also for `polkadot-fellows`'s production [SP
runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants).
This PR cleans `parachains-common` module to contain only common and
generic functionality.
Testnet-specific constants have been moved to the separate module
dedicated just for testnets:
`polkadot-sdk/cumulus/parachains/runtimes/constants/`
Part of: https://github.com/paritytech/polkadot-sdk/issues/3054
---------
Co-authored-by: georgepisaltu <george.pisaltu@parity.io>
Reverts paritytech/polkadot-sdk#2302. 🤦♂️ should have checked the
migration CI first.
We either need to reduce the `max_message_size` for the open HRMP
channels on the failing chains or increase the `PageSize` of the XCMP
queue.
Both would be fine on a test-net, but i assume this will also fail
before the next SP runtime upgrade so first need to think what best to
do.
AFAIK its not possible currently to change the `max_message_size` of an
open HRMP channel.
- Prepares for the Deneb hardfork on Sepolia testnet on 31 January
(needs to be deployed to Rococo before then)
- Removes `beacon-minimal-spec` flag for simpler config
- Adds test comments
---------
Co-authored-by: Ron <yrong1997@gmail.com>
Co-authored-by: claravanstaden <Cats 4 life!>
Co-authored-by: Alistair Singh <alistair.singh7@gmail.com>
Remove `without_storage_info` from the XCMP queue pallet. Part of
https://github.com/paritytech/polkadot-sdk/issues/323
Changes:
- Limit the number of channels that can be suspended at the same time.
- Limit the number of channels that can have messages or signals pending
at the same time.
A No-OP migration is put in place to ensure that all `BoundedVec`s still
decode and not truncate after upgrade. The storage version is thereby
bumped to 4 to have our tooling remind us to deploy that migration.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
There were several improvements and PRs that didn't apply to all
runtimes, so this PR attempts to align those small differences. In
addition, the PR eliminates unused dependencies across multiple modules.
Relates to PR for `polkadot-fellows`:
https://github.com/polkadot-fellows/runtimes/pull/154
This PR backports version bumps from release branch
`release-polkadot-v1.6.0` back to `master` and also moved `prdoc` files
related to the release to the appropriate folder
# Note for reviewer
Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.
# Description
Added XCMv4.
## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation
In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.
## Removed `Abstract` asset id
It was not being used anywhere and this simplifies the code.
Now assets are just constructed as follows:
```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```
No need for specifying `Concrete` anymore.
## Outcome is now a named fields struct
Instead of
```rust
pub enum Outcome {
Complete(Weight),
Incomplete(Weight, Error),
Error(Error),
}
```
we now have
```rust
pub enum Outcome {
Complete { used: Weight },
Incomplete { used: Weight, error: Error },
Error { error: Error },
}
```
## Added Reanchorable trait
Now both locations and assets implement this trait, making it easier to
reanchor both.
## New syntax for building locations and junctions
Now junctions are built using the following methods:
```rust
let location = Location {
parents: 1,
interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```
or
```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```
And they are matched like so:
```rust
match location.unpack() {
(1, [Parachain(id)]) => ...
(0, Here) => ...,
(1, [_]) => ...,
}
```
This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.
This was needed to make all sizes smaller.
# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id
---------
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
- updates snowbridge crates to `0.9.0`
- updates Cargo.toml files in preparation for publishing to crates.io
- adds Kusama and Polkadot Snowbridge runtime config crates
- moves runtime tests from the Snowbridge subtree into the bridge hub
tests dir
---------
Co-authored-by: claravanstaden <Cats 4 life!>
Co-authored-by: Ron <yrong1997@gmail.com>
- Includes the introduction of the `fast-runtime` feature, which cleans
up our features
- Updates beacon client fork versions config to Sepolia's versions
- Cleanup of AgentIdOf
---------
Co-authored-by: Ron <yrong1997@gmail.com>
Co-authored-by: claravanstaden <Cats 4 life!>
- Updates all safe call filters to allow `system::authorize_upgrade`.
- Updates Coretime safe call filter to allow `sudo` and
`system_set_storage`.
- Update Coretime teleports to allow teleportation with other system
chains.
---------
Co-authored-by: Bastian Köcher <info@kchr.de>
Adds the `authorize_upgrade` -> `enact_authorized_upgrade` pattern to
`frame-system`. This will be useful for upgrading bridged chains that
are under the governance of Polkadot without passing entire runtime Wasm
blobs over a bridge.
Notes:
- Changed `enact_authorized_upgrade` to `apply_authorized_upgrade`.
Personal opinion, "apply" more accurately expresses what it's doing. Can
change back if outvoted.
- Remove `check_version` in favor of two extrinsics, so as to make
_checked_ the default.
- Left calls in `parachain-system` and marked as deprecated to prevent
breaking the API. They just call into the `frame-system` functions.
- Updated `frame-system` benchmarks to v2 syntax.
---------
Co-authored-by: command-bot <>
This PR adds possibility for relay chain governance to halt and resume
bridge pallets using XCM calls. Following calls are enabled over XCM for
the `root` origin: `pallet_bridge_grandpa::set_operating_mode`,
`pallet_bridge_parachains::set_operating_mode` and
`pallet_bridge_messages::set_operating_mode`.
This PR adds [Rococo
People](https://github.com/paritytech/polkadot-sdk/pull/2281) <> [Rococo
Bulletin](https://github.com/zdave-parity/polkadot-bulletin-chain) to
the Rococo Bridge Hub code. There's a couple of things left to do here:
- [x] add remaining tests - it'd need some refactoring in the
`bridge-hub-test-utils` - will do in a separate PR;
- [x] actually run benchmarks for new messaging pallet (do we have bot
nowadays?).
The reason why I'm opening it before this ^^^ is ready, is that I'd like
to hear others opinion on how to deal with hacks with that bridge.
Initially I was assuming that Rococo Bulletin will be the 1:1 copy of
the Polkadot Bulletin (to avoid maintaining multiple
runtimes/releases/...), so you can see many `PolkadotBulletin` mentions
in this PR, even though we are going to bridge with the parallel chain
(`RococoBulletin`). That's because e.g. pallet names from
`construct_runtime` are affecting runtime storage keys and bridges are
using runtime storage proofs => it is important to use names that the
Bulletin chain expects.
But in the end, this hack won't work - we can't use Polkadot Bulletin
runtime to bridge with Rococo Bridge Hub, because Polkadot Bulletin
expects Polkadot Bridge hub to use `1002` parachain id and Rococo Bridge
Hub seats on the `1013`. This also affects storage keys using in
bridging, so I had to add the [`rococo`
feature](https://github.com/svyatonik/polkadot-bulletin-chain/blob/add-bridge-pallets/runtime/Cargo.toml#L198)
to the Bulletin chain. So now we can actually alter its runtime and
adapt it for Rococo.
So the question here is - what's better for us here
- to leave everything as is (seems hacky and non-trivial);
- change Bulletin chain runtime when `rococo` feature is used - e.g. use
proper names there (`WithPolkadotGrandpa` -> `WithRococoGrandpa`, ...)
- add another set of pallets to the Bulletin chain runtime to bridge
with Rococo and never use them in production. Similar to hack that we
had in Rococo/Wococo
cc @acatangiu @bkontur @serban300
also cc @joepetrowski as the main "client" of this bridge
---
A couple words on how this bridge is different from the Rococo <>
Westend bridge:
- it is a bridge with a chain that uses GRANDPA finality, not the
parachain finality (hence the tests needs to be changed);
- it is a fee-free bridge. So
`AllowExplicitUnpaidExecutionFrom<Equals<SiblingPeople>>` + we are not
paying any rewards to relayers (apart from compensating transaction
costs).
---------
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com>
Co-authored-by: Egor_P <egor@parity.io>
Co-authored-by: command-bot <>
In the move from the old `Currency` traits to the new `fungible/s`
family of traits, we already had the `FungiblesAdapter` and
`NonFungiblesAdapter` for multiple fungible and non fungible assets
respectively. However, for handling only one fungible asset, we were
missing a `FungibleAdapter`, and so used the old `CurrencyAdapter`
instead. This PR aims to fill in that gap, and provide the new adapter
for more updated examples.
I marked the old `CurrencyAdapter` as deprecated as part of this PR, and
I'll change it to the new `FungibleAdapter` in a following PR.
The two stages are separated so as to not bloat this PR with some name
fixes in tests.
---------
Co-authored-by: command-bot <>
We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Branislav Kontur