We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
## Summary
This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.
## Problem/Motivation
The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.
In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).
2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471aa0210f0ac9903bdd7d8f9351f9a635f/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.
However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
```
/// Just a simulation of possible error, which could happen on BHW
/// (this code is based on actual master without XCMv4)
let encoded = hex_literal::hex!("0400");
println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));
Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
```
- Similar compatibility issues exist between AHR and AHW.
## Solution
This pull request introduces the following solutions:
1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.
2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.
3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.
These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.
## Possible alternative solution
_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._
Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.
```
ExportMessage {
network: NetworkId,
destination: InteriorMultiLocation,
xcm: Xcm<()>
destination_xcm_version: Version, // <- new attritbute
},
```
```
pub trait ExportXcm {
fn validate(
network: NetworkId,
channel: u32,
universal_source: &mut Option<InteriorMultiLocation>,
destination: &mut Option<InteriorMultiLocation>,
message: &mut Option<Xcm<()>>,
destination_xcm_version: Version, , // <- new attritbute
) -> SendResult<Self::Ticket>;
```
## Future Directions
This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.
## TODO
- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d05f9b510f979a0cc3c7847707bacba2e/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc
Part of: https://github.com/paritytech/parity-bridges-common/issues/2719
---------
Co-authored-by: command-bot <>
Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.
If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html
@ggwpez, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.
TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
Right now governance could only control byte-fee component of Rococo <>
Westend message fees (paid at Asset Hubs). This PR changes it a bit:
1) governance now allowed to control both fee components - byte fee and
base fee;
2) base fee now includes cost of "default" delivery and confirmation
transactions, in addition to `ExportMessage` instruction cost.
## Summary
Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was
added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so
now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And
perhaps retire AssetHubWococo and the Wococo chains).
## Solution
**bridge-hub-westend-runtime**
- added new runtime as a copy of `bridge-hub-rococo-runtime`
- added support for bridging to `BridgeHubRococo`
- added tests and benchmarks
**bridge-hub-rococo-runtime**
- added support for bridging to `BridgeHubWestend`
- added tests and benchmarks
- internal refactoring by splitting bridge configuration per network,
e.g., `bridge_to_whatevernetwork_config.rs`.
**asset-hub-rococo-runtime**
- added support for asset bridging to `AssetHubWestend` (allows to
receive only WNDs)
- added new xcm router for `Westend`
- added tests and benchmarks
**asset-hub-westend-runtime**
- added support for asset bridging to `AssetHubRococo` (allows to
receive only ROCs)
- added new xcm router for `Rococo`
- added tests and benchmarks
## Deployment
All changes will be deployed as a part of
https://github.com/paritytech/polkadot-sdk/issues/1988.
## TODO
- [x] benchmarks for all pallet instances
- [x] integration tests
- [x] local run scripts
Relates to:
https://github.com/paritytech/parity-bridges-common/issues/2602
Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988
---------
Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Changes:
- Change the fungible(s) logic to treat a self-transfer as No-OP (as
long as all pre-checks pass).
Note that the self-transfer case will not emit an event since no state
was changed.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Adds a config file that allows to run `zepter` without any arguments in
the workspace to address all issues.
A secondary workflow for the CI is provided as `zepter run check`. Both
the formatting and linting are now in one check for efficiancy.
The latest version also detects some more things that `featalign` was
already showing.
Error message [in the
CI](https://gitlab.parity.io/parity/mirrors/polkadot-sdk/-/jobs/3916205)
now looks like this:
```pre
...
crate 'test-parachains' (/Users/vados/Documents/work/polkadot-sdk/polkadot/parachain/test-parachains/Cargo.toml)
feature 'std'
must propagate to:
parity-scale-codec
Found 55 issues (run with --fix to fix).
Error: Command 'lint propagate-feature' failed with exit code 1
Polkadot-SDK uses the Zepter CLI to detect abnormalities in the feature configuration.
It looks like one more more checks failed; please check the console output. You can try to automatically address them by running `zepter`.
Otherwise please ask directly in the Merge Request, GitHub Discussions or on Matrix Chat, thank you.
For more information, see:
- https://github.com/paritytech/polkadot-sdk/issues/1831
- https://github.com/ggwpez/zepter
```
TODO:
- [x] Check that CI fails correctly
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
closes https://github.com/paritytech/polkadot-sdk/issues/1882
## Breaking Changes
This PR introduces a new item to `pallet_balances::Config`:
```diff
trait Config {
++ type RuntimeFreezeReasons;
}
```
This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.
In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
This PR does not introduce any functional changes to the existing code,
it merely addresses several minor refactors:
- Moving bridging pallets to separate files.
- Improving the readability and naming of weight files for bridging
pallets and bridging pallet instances.
The reason for this refactor is to facilitate easier plugin integration
for the upcoming bridge between Rococo and Westend.
---------
Co-authored-by: command-bot <>
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.
This requires: https://github.com/paritytech/scale-info/pull/197
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
This commit adds Rococo Asset Hub dedicated runtime so we can test new
features here, before merging them in Kusama Asset Hub.
Also adds one such feature: asset transfer over bridge (Rococo AssetHub
<> Wococo AssetHub)
- clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime`
- make it use Rococo primitives, names, assets, constants, etc
- add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo
AssetHub
Fixes#1128
---------
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
## Summary
This PR introduces several enhancements.
The current implementation of `NetworkExportTable` lacks remote location
filtering support beyond `NetworkId` lookup. To provide more control and
granularity, it's essential to allow configuration for bridging to
different consensus `NetworkId` while restricting access e.g. to
particular remote parachains.
Additionally, the `StartsWith` and `Equals` and
`StartsWithExplicitGlobalConsensus` helper functions, which are in
active use, are moved to the `xcm-builder` and `frame_support` modules
for better code organization.
Adds a new `LocationWithAssetFilters` filter to enable location-based
and asset-related filtering. This filter is useful for configuring the
`pallet_xcm` filter for
[XcmTeleportFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L212)
and
[XcmReserveTransferFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L216)
to restrict specific assets.
Furthermore, the `BridgeMessage` fields are not accessible outside of
`xcm-builder`, limiting the ability to create custom logic dependent on
it.
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
- Async-backing related primitives are stable `primitives::v6`
- Async-backing API is now part of `api_version(7)`
- It's enabled on Rococo and Westend runtimes
---------
Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com>
This PR updates:
- trie-db from 0.27.1 to 0.28.0
- trie-bench from 0.37.0 to 0.38.0 (deb-dependency)
While at it, also adapts the recorder to take into account the newly
added `TrieAccess::InlineValue`.
Needed by:
- https://github.com/paritytech/polkadot-sdk/pull/1153
@paritytech/subxt-team
---------
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
Squirrel