[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.
Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.
I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`--out-peers 200`), networking CPU
usage goes down from ~110% to ~30% (80 pp) and for normal load
(`--out-peers 40`), the usage goes down from ~55% to ~18% (37 pp).
These should not be taken as final numbers because:
a) there are still some low-hanging optimization fruits, such as
enabling [receive window
auto-tuning](https://github.com/libp2p/rust-yamux/pull/176), integrating
`Peerset` more closely with `litep2p` or improving memory usage of the
WebSocket transport
b) fixing bugs/instabilities that incorrectly cause `litep2p` to do less
work will increase the networking CPU usage
c) verification in a more diverse set of tests/conditions is needed
Nevertheless, these numbers should give an early estimate for CPU usage
of the new networking backend.
This PR consists of three separate changes:
* introduce a generic `PeerId` (wrapper around `Multihash`) so that we
don't have use `NetworkService::PeerId` in every part of the code that
uses a `PeerId`
* introduce `NetworkBackend` trait, implement it for the libp2p network
stack and make Polkadot SDK generic over `NetworkBackend`
* implement `NetworkBackend` for litep2p
The new library should be considered experimental which is why
`rust-libp2p` will remain as the default option for the time being. This
PR currently depends on the master branch of `litep2p` but I'll cut a
new release for the library once all review comments have been
addresses.
---------
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexandru Vasile <alexandru.vasile@parity.io>
This PR exports unified hostfunctions needed for parachains. Basicaly
`SubstrateHostFunctions` + `storage_proof_size::HostFunctions`.
Also removes the native executor from the parachain template.
---------
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.
If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html
@ggwpez, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.
TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
This PR provides the infrastructure for the pov-reclaim mechanism
discussed in #209. The goal is to provide the current proof size to the
runtime so it can be used to reclaim storage weight.
## New Host Function
- A new host function is provided
[here](https://github.com/skunert/polkadot-sdk/blob/5b317fda3be205f4136f10d4490387ccd4f9765d/cumulus/primitives/pov-reclaim/src/lib.rs#L23).
It returns the size of the current proof size to the runtime. If
recording is not enabled, it returns 0.
## Implementation Overview
- Implement option to enable proof recording during import in the
client. This is currently enabled for `polkadot-parachain`,
`parachain-template` and the cumulus test node.
- Make the proof recorder ready for no-std. It was previously only
enabled for std environments, but we need to record the proof size in
`validate_block` too.
- Provide a recorder implementation that only the records the size of
incoming nodes and does not store the nodes itself.
- Fix benchmarks that were broken by async backing changes
- Provide new externalities extension that is registered by default if
proof recording is enabled.
- I think we should discuss the naming, pov-reclaim was more intuitive
to me, but we could also go with clawback like in the issue.
## Impact of proof recording during import
With proof recording: 6.3058 Kelem/s
Without proof recording: 6.3427 Kelem/s
The measured impact on the importing performance is quite low on my
machine using the block import benchmark. With proof recording I am
seeing a performance hit of 0.585%.
---------
Co-authored-by: command-bot <>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: Bastian Köcher <git@kchr.de>
This PR contains some fixes and cleanups for parachain nodes:
1. When using async backing, node no longer complains about being unable
to reach the prospective-parachain subsystem.
2. Parachain warp sync now informs users that the finalized para block
has been retrieved.
```
2023-11-08 13:24:42 [Parachain] 🎉 Received finalized parachain header #5747719 (0xa0aa…674b) from the relay chain.
```
3. When a user supplied an invalid `--relay-chain-rpc-url`, we were
crashing with a very verbose message. Removed the `expect` and improved
the error message.
```
2023-11-08 13:57:56 [Parachain] No valid RPC url found. Stopping RPC worker.
2023-11-08 13:57:56 [Parachain] Essential task `relay-chain-rpc-worker` failed. Shutting down service.
Error: Service(Application(WorkerCommunicationError("RPC worker channel closed. This can hint and connectivity issues with the supplied RPC endpoints. Message: oneshot canceled")))
```
- Async-backing related primitives are stable `primitives::v6`
- Async-backing API is now part of `api_version(7)`
- It's enabled on Rococo and Westend runtimes
---------
Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com>
Submit the outstanding PRs from the old repos(these were already
reviewed and approved before the repo rorg, but not yet submitted):
Main PR: https://github.com/paritytech/substrate/pull/14014
Companion PRs: https://github.com/paritytech/polkadot/pull/7134,
https://github.com/paritytech/cumulus/pull/2489
The changes in the PR:
1. ChainSync currently calls into the block request handler directly.
Instead, move the block request handler behind a trait. This allows new
protocols to be plugged into ChainSync.
2. BuildNetworkParams is changed so that custom relay protocol
implementations can be (optionally) passed in during network creation
time. If custom protocol is not specified, it defaults to the existing
block handler
3. BlockServer and BlockDownloader traits are introduced for the
protocol implementation. The existing block handler has been changed to
implement these traits
4. Other changes:
[X] Make TxHash serializable. This is needed for exchanging the
serialized hash in the relay protocol messages
[X] Clean up types no longer used(OpaqueBlockRequest,
OpaqueBlockResponse)
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: command-bot <>
* Update substrate & polkadot
* min changes to make async backing compile
* (async backing) parachain-system: track limitations for unincluded blocks (#2438)
* unincluded segment draft
* read para head from storage proof
* read_para_head -> read_included_para_head
* Provide pub interface
* add errors
* fix unincluded segment update
* BlockTracker -> Ancestor
* add a dmp limit
* Read para head depending on the storage switch
* doc comments
* storage items docs
* add a sanity check on block initialize
* Check watermark
* append to the segment on block finalize
* Move segment update into set_validation_data
* Resolve para head todo
* option watermark
* fix comment
* Drop dmq check
* fix weight
* doc-comments on inherent invariant
* Remove TODO
* add todo
* primitives tests
* pallet tests
* doc comments
* refactor unincluded segment length into a ConsensusHook (#2501)
* refactor unincluded segment length into a ConsensusHook
* add docs
* refactor bandwidth_out calculation
Co-authored-by: Chris Sosnin <48099298+slumber@users.noreply.github.com>
* test for limits from impl
* fmt
* make tests compile
* update comment
* uncomment test
* fix collator test by adding parent to state proof
* patch HRMP watermark rules for unincluded segment
* get consensus-common tests to pass, using unincluded segment
* fix unincluded segment tests
* get all tests passing
* fmt
* rustdoc CI
* aura-ext: limit the number of authored blocks per slot (#2551)
* aura_ext consensus hook
* reverse dependency
* include weight into hook
* fix tests
* remove stray println
Co-authored-by: Chris Sosnin <48099298+slumber@users.noreply.github.com>
* fix test warning
* fix doc link
---------
Co-authored-by: Chris Sosnin <48099298+slumber@users.noreply.github.com>
Co-authored-by: Chris Sosnin <chris125_@live.com>
* parachain-system: ignore go ahead signal once upgrade is processed (#2594)
* handle goahead signal for unincluded segment
* doc comment
* add test
* parachain-system: drop processed messages from inherent data (#2590)
* implement `drop_processed_messages`
* drop messages based on relay parent number
* adjust tests
* drop changes to mqc
* fix comment
* drop test
* drop more dead code
* clippy
* aura-ext: check slot in consensus hook and remove all `CheckInherents` logic (#2658)
* aura-ext: check slot in consensus hook
* convert relay chain slot
* Make relay chain slot duration generic
* use fixed velocity hook for pallets with aura
* purge timestamp inherent
* fix warning
* adjust runtime tests
* fix slots in tests
* Make `xcm-emulator` test pass for new consensus hook (#2722)
* add pallets on_initialize
* tests pass
* add AuraExt on_init
* ".git/.scripts/commands/fmt/fmt.sh"
---------
Co-authored-by: command-bot <>
---------
Co-authored-by: Ignacio Palacios <ignacio.palacios.santos@gmail.com>
* update polkadot git refs
* CollationGenerationConfig closure is now optional (#2772)
* CollationGenerationConfig closure is now optional
* fix test
* propagate network-protocol-staging feature (#2899)
* Feature Flagging Consensus Hook Type Parameter (#2911)
* First pass
* fmt
* Added as default feature in tomls
* Changed to direct dependency feature
* Dealing with clippy error
* Update pallets/parachain-system/src/lib.rs
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
---------
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
* fmt
* bump deps and remove warning
* parachain-system: update RelevantMessagingState according to the unincluded segment (#2948)
* mostly address 2471 with a bug introduced
* adjust relevant messaging state after computing total
* fmt
* max -> min
* fix test implementation of xcmp source
* add test
* fix test message sending logic
* fix + test
* add more to unincluded segment test
* fmt
---------
Co-authored-by: Chris Sosnin <chris125_@live.com>
* Integrate new Aura / Parachain Consensus Logic in Parachain-Template / Polkadot-Parachain (#2864)
* add a comment
* refactor client/service utilities
* deprecate start_collator
* update parachain-template
* update test-service in the same way
* update polkadot-parachain crate
* fmt
* wire up new SubmitCollation message
* some runtime utilities for implementing unincluded segment runtime APIs
* allow parachains to configure their level of sybil-resistance when starting the network
* make aura-ext compile
* update to specify sybil resistance levels
* fmt
* specify relay chain slot duration in milliseconds
* update Aura to explicitly produce Send futures
also, make relay_chain_slot_duration a Duration
* add authoring duration to basic collator and document params
* integrate new basic collator into parachain-template
* remove assert_send used for testing
* basic-aura: only author when parent included
* update polkadot-parachain-bin
* fmt
* some fixes
* fixes
* add a RelayNumberMonotonicallyIncreases
* add a utility function for initializing subsystems
* some logging for timestamp adjustment
* fmt
* some fixes for lookahead collator
* add a log
* update `find_potential_parents` to account for sessions
* bound the loop
* restore & deprecate old start_collator and start_full_node functions.
* remove unnecessary await calls
* fix warning
* clippy
* more clippy
* remove unneeded logic
* ci
* update comment
Co-authored-by: Marcin S. <marcin@bytedude.com>
* (async backing) restore `CheckInherents` for backwards-compatibility (#2977)
* bring back timestamp
* Restore CheckInherents
* revert to empty CheckInherents
* make CheckInherents optional
* attempt
* properly end system blocks
* add some more comments
* ignore failing system parachain tests
* update refs after main feature branch merge
* comment out the offending tests because CI runs ignored tests
* fix warnings
* fmt
* revert to polkadot master
* cargo update -p polkadot-primitives -p sp-io
---------
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
Co-authored-by: Ignacio Palacios <ignacio.palacios.santos@gmail.com>
Co-authored-by: Bradley Olson <34992650+BradleyOlson64@users.noreply.github.com>
Co-authored-by: Marcin S. <marcin@bytedude.com>
Co-authored-by: eskimor <eskimor@users.noreply.github.com>
Co-authored-by: Andronik <write@reusable.software>
* rough draft of potential parent search
* get things compiling
* fmt
* add new function to all RelayChainInterface implementations
* fix compilation
* set slot and timestamp based on relay parent, prepare for find-parent
* skeleton of new aura logic
* fmt
* introduce a collator module in the Aura crate
* extract different implementations into own modules
* make interface more convenient
* docs and todos for lookahead
* refactor basic collator to use new collator utility
* some more refactoring
* finish most of the control flow for new aura
* introduce backend as parameter
* fix compilation
* fix a couple more TODOs
* add an `announce_block` function to collator service
* announce with barrier
* rename block announcement validator to be more specific
* fmt
* clean up unused import errors
* update references to BlockAnnounceValidator
* rename unstable_reimpl
* add AuraUnincludedSegmentApi
* finish rename
* integrate AuraUnincludedSegmentApi
* add a new block announcement validator for backwards compatibility
* add some naive equivocation defenses
* rustfmt
* clean up remaining TODO [now]s
* fmt
* try to fix inprocess-interface
* actually fix compilation
* ignored -> rejected rephrase
* fix test compilation
* fmt
* clippy
* Use primitives reexported from `polkadot_primitives` crate root
* restart CI
* Fixes after merge
* update lockfile for {"polkadot", "substrate"}
Co-authored-by: parity-processbot <>
Prevents the StateDbError::TooManySiblingBlocks error from being triggered by eagerly removing
stale blocks from the backend on block import and before the error condition is met.
Introduces a just in time block recovery mechanism for blocks that were wrongly removed
via an explicit pov-recovery method
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Allow specification of multiple urls for relay chain rpc nodes
* Add pooled RPC client basics
* Add list of clients to pooled client
* Improve
* Forward requests to dispatcher
* Switch clients on error
* Implement rotation logic
* Improve subscription handling
* Error handling cleanup
* Remove retry from rpc-client
* Improve naming
* Improve documentation
* Improve `ClientManager` abstraction
* Adjust zombienet test
* Add more comments
* fmt
* Apply reviewers comments
* Extract reconnection to extra method
* Add comment to reconnection method
* Clean up some dependencies
* Fix build
* fmt
* Provide alias for cli argument
* Apply review comments
* Rename P* to Relay*
* Improve zombienet test
* fmt
* Fix zombienet sleep
* Simplify zombienet test
* Reduce log clutter and fix starting position
* Do not distribute duplicated imported and finalized blocks
* fmt
* Apply code review suggestions
* Move building of relay chain interface to `cumulus-client-service`
* Refactoring to not push back into channel
* FMT
* Add minimal overseer gen with dummy subsystems
* Fix dependencies
* no-compile: only client transaction pool missing
* Remove unused imports
* Continue to hack towards PoC
* Continue
* Make mini node compile
* Compiling version with blockchainevents trait
* Continue
* Check in lockfile
* Block with tokio
* update patches
* Update polkadot patches
* Use polkadot-primitives v2
* Fix build problems
* First working version
* Adjust cargo.lock
* Add integration test
* Make integration test work
* Allow startinc collator without relay-chain args
* Make OverseerRuntimeClient async
* Create separate integration test
* Remove unused ChainSelection code
* Remove unused parameters on new-mini
* Connect collator node in test to relay chain nodes
* Make BlockChainRPCClient obsolete
* Clean up
* Clean up
* Reimplement blockchain-rpc-events
* Revert "Allow startinc collator without relay-chain args"
This reverts commit f22c70e16521f375fe125df5616d48ceea926b1a.
* Add `strict_record_validation` to AuthorityDiscovery
* Move network to cumulus
* Remove BlockchainRPCEvents
* Remove `BlockIdTo` and `BlockchainEvents`
* Make AuthorityDiscovery async
* Use hash in OverseerRuntime
* Adjust naming of runtime client trait
* Implement more rpc-client methods
* Improve error handling for `ApiError`
* Extract authority-discovery creationand cleanup
* RPC -> Rpc
* Extract bitswap
* Adjust to changes on master
* Implement `hash` method
* Introduce DummyChainSync, remove ProofProvider and BlockBackend
* Remove `HeaderMetadata` from blockchain-rpc-client
* Make ChainSync work
* Implement NetworkHeaderBackend
* Cleanup
* Adjustments after master merge
* Remove ImportQueue from network parameters
* Remove cargo patches
* Eliminate warnings
* Revert to HeaderBackend
* Add zombienet test
* Implement `status()` method
* Add more comments, improve readability
* Remove patches from Cargo.toml
* Remove integration test in favor of zombienet
* Remove unused dependencies, rename minimal node crate
* Adjust to latest master changes
* fmt
* Execute zombienet test on gitlab ci
* Reuse network metrics
* Chainsync metrics
* fmt
* Feed RPC node as boot node to the relay chain minimal node
* fmt
* Add bootnodes to zombienet collators
* Allow specification of relay chain args
* Apply review suggestions
* Remove unnecessary casts
* Enable PoV recovery for rpc full nodes
* Revert unwanted changes
* Make overseerHandle non-optional
* Add availability-store subsystem
* Add AuxStore and ChainApiSubsystem
* Add availability distribution subsystem
* Improve pov-recovery logging and add RPC nodes to tests
* fmt
* Make availability config const
* lock
* Enable debug logs for pov-recovery in zombienet
* Add log filters to test binary
* Allow wss
* Address review comments
* Apply reviewer comments
* Adjust to master changes
* Apply reviewer suggestions
* Bump polkadot
* Add builder method for minimal node
* Bump substrate and polkadot
* Clean up overseer building
* Add bootnode to two in pov_recovery test
* Fix missing quote in pov recovery zombienet test
* Improve zombienet pov test
* More debug logs for pov-recovery
* Remove reserved nodes like on original test
* Revert zombienet test to master
* Initial network interface preparations
* Implement get_storage_by_key
* Implement `validators` and `session_index_for_child`
* Implement persisted_validation_data and candidate_pending_availability
* Fix method name for persisted_validation_data and add encoded params
* Implement `retrieve_dmq_contents` and `retrieve_all_inbound_hrmp_channel_contents`
* Implement `prove_read`
* Introduce separate RPC client, expose JsonRpSee errors
* Simplify closure in call_remote_runtime_function
* Implement import stream, upgrade JsonRpSee
* Implement finality stream
* Remove unused method from interface
* Implement `is_major_syncing`
* Implement `wait_on_block`
* Fix tests
* Unify error handling `ApiError`
* Replace WaitError with RelayChainError
* Wrap BlockChainError in RelayChainError
* Unify error handling in relay chain intefaces
* Fix return type of proof method
* Improve error handling of new methods
* Improve error handling and move logging outside of interface
* Clean up
* Remove unwanted changes, clean up
* Remove unused import
* Add format for StatemachineError and remove nused From trait
* Use 'thiserror' crate to simplify error handling
* Expose error for overseer, further simplify error handling
* Reintroduce network interface
* Implement cli option
* Adjust call_state method to use hashes
* Disable PoV recovery when RPC is used
* Add integration test for network full node
* Use Hash instead of BlockId to ensure compatibility with RPC interface
* Fix cargo check warnings
* Implement retries
* Remove `expect` statements from code
* Update jsonrpsee to 0.8.0 and make collator keys optional
* Make cli arguments conflicting
* Remove unused `block_status` method
* Add clippy fixes
* Cargo fmt
* Validate relay chain rpc url
* Clean up dependencies and add one more integration test
* Clean up
* Clean up dependencies of relay-chain-network
* Use hash instead of blockid for rpc methods
* Fix tests
* Update client/cli/src/lib.rs
Co-authored-by: Koute <koute@users.noreply.github.com>
* Improve error message of cli validation
* Add rpc client constructor
* Do not use debug formatting for errors
* Improve logging for remote runtime methods
* Only retry on transport problems
* Use PHash by value, rename test
* Improve tracing, return error on relay-chain-interface build
* Fix naming, use generics instead of deserializing manually
* Rename RelayChainLocal and RelayChainNetwork
* lock
* Format
* Use impl trait for encodable runtime payload
* Only instantiate full node in tests when we need it
* Upgrade scale-codec to 3.0.0
* Improve expect log
Co-authored-by: Koute <koute@users.noreply.github.com>
Aaro Altonen