Cumulus test-parachain node and test runtime were still using relay
chain consensus and 12s blocktimes. With async backing around the corner
on the major chains we should switch our tests too.
Also needed to nicely test the changes coming to collators in #3168.
### Changes Overview
- Followed the [migration
guide](https://wiki.polkadot.network/docs/maintain-guides-async-backing)
for async backing for the cumulus-test-runtime
- Adjusted the cumulus-test-service to use the correct import-queue,
lookahead collator etc.
- The block validation function now uses the Aura Ext Executor so that
the seal of the block is validated
- Previous point requires that we seal block before calling into
`validate_block`, I introduced a helper function for that
- Test client adjusted to provide a slot to the relay chain proof and
the aura pre-digest
**Update:** Pushed additional changes based on the review comments.
**This pull request fixes various spelling mistakes in this
repository.**
Most of the changes are contained in the first **3** commits:
- `Fix spelling mistakes in comments and docs`
- `Fix spelling mistakes in test names`
- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`
Other source code spelling mistakes are separated into individual
commits for easier reviewing:
- `Fix the spelling of 'authority'`
- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`
- `Fix the spelling of 'prev_enqueud_messages'`
- `Fix the spelling of 'endpoint'`
- `Fix the spelling of 'children'`
- `Fix the spelling of 'PenpalSiblingSovereignAccount'`
- `Fix the spelling of 'PenpalSudoAccount'`
- `Fix the spelling of 'insufficient'`
- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`
- `Fix the spelling of 'subtracted'`
- `Fix the spelling of 'CandidatePendingAvailability'`
- `Fix the spelling of 'exclusive'`
- `Fix the spelling of 'until'`
- `Fix the spelling of 'discriminator'`
- `Fix the spelling of 'nonexistent'`
- `Fix the spelling of 'subsystem'`
- `Fix the spelling of 'indices'`
- `Fix the spelling of 'committed'`
- `Fix the spelling of 'topology'`
- `Fix the spelling of 'response'`
- `Fix the spelling of 'beneficiary'`
- `Fix the spelling of 'formatted'`
- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`
- `Fix the spelling of 'succeeded'`
- `Fix the spelling of 'reopened'`
- `Fix the spelling of 'proposer'`
- `Fix the spelling of 'InstantiationNonce'`
- `Fix the spelling of 'depositor'`
- `Fix the spelling of 'expiration'`
- `Fix the spelling of 'phantom'`
- `Fix the spelling of 'AggregatedKeyValue'`
- `Fix the spelling of 'randomness'`
- `Fix the spelling of 'defendant'`
- `Fix the spelling of 'AquaticMammal'`
- `Fix the spelling of 'transactions'`
- `Fix the spelling of 'PassingTracingSubscriber'`
- `Fix the spelling of 'TxSignaturePayload'`
- `Fix the spelling of 'versioning'`
- `Fix the spelling of 'descendant'`
- `Fix the spelling of 'overridden'`
- `Fix the spelling of 'network'`
Let me know if this structure is adequate.
**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.
~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~
~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~
~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~
**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.
~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~
closes#2567
Followup for https://github.com/paritytech/polkadot-sdk/pull/2331
This PR contains multiple internal cleanups:
1. This gets rid of the functionality in `generate_genesis_block` which
was only used in one benchmark
2. Fixed `transaction_pool` and `transaction_throughput` benchmarks
failing since they require a tokio runtime now.
3. Removed `parachain_id` CLI option from the test parachain
4. Removed `expect` call from `RuntimeResolver`
This PR provides the infrastructure for the pov-reclaim mechanism
discussed in #209. The goal is to provide the current proof size to the
runtime so it can be used to reclaim storage weight.
## New Host Function
- A new host function is provided
[here](https://github.com/skunert/polkadot-sdk/blob/5b317fda3be205f4136f10d4490387ccd4f9765d/cumulus/primitives/pov-reclaim/src/lib.rs#L23).
It returns the size of the current proof size to the runtime. If
recording is not enabled, it returns 0.
## Implementation Overview
- Implement option to enable proof recording during import in the
client. This is currently enabled for `polkadot-parachain`,
`parachain-template` and the cumulus test node.
- Make the proof recorder ready for no-std. It was previously only
enabled for std environments, but we need to record the proof size in
`validate_block` too.
- Provide a recorder implementation that only the records the size of
incoming nodes and does not store the nodes itself.
- Fix benchmarks that were broken by async backing changes
- Provide new externalities extension that is registered by default if
proof recording is enabled.
- I think we should discuss the naming, pov-reclaim was more intuitive
to me, but we could also go with clawback like in the issue.
## Impact of proof recording during import
With proof recording: 6.3058 Kelem/s
Without proof recording: 6.3427 Kelem/s
The measured impact on the importing performance is quite low on my
machine using the block import benchmark. With proof recording I am
seeing a performance hit of 0.585%.
---------
Co-authored-by: command-bot <>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: Bastian Köcher <git@kchr.de>
The `BlockBuilderProvider` was a trait that was defined in
`sc-block-builder`. The trait was implemented for `Client`. This
basically meant that you needed to import `sc-block-builder` any way to
have access to the block builder. So, this trait was not providing any
real value. This pull request is removing the said trait. Instead of the
trait it introduces a builder for creating a `BlockBuilder`. The builder
currently has the quite fabulous name `BlockBuilderBuilder` (I'm open to
any better name 😅). The rest of the pull request is about
replacing the old trait with the new builder.
# Downstream code changes
If you used `new_block` or `new_block_at` before you now need to switch
it over to the new `BlockBuilderBuilder` pattern:
```rust
// `new` requires a type that implements `CallApiAt`.
let mut block_builder = BlockBuilderBuilder::new(client)
// Then you need to specify the hash of the parent block the block will be build on top of
.on_parent_block(at)
// The block builder also needs the block number of the parent block.
// Here it is fetched from the given `client` using the `HeaderBackend`
// However, there also exists `with_parent_block_number` for directly passing the number
.fetch_parent_block_number(client)
.unwrap()
// Enable proof recording if required. This call is optional.
.enable_proof_recording()
// Pass the digests. This call is optional.
.with_inherent_digests(digests)
.build()
.expect("Creates new block builder");
```
---------
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
Co-authored-by: command-bot <>
* Fix APIs
* Reflect API changes
* Everything builds
* Fixes
* Fixes
* Update Cargo.toml
* Fixes
* Fixes
* No networks use freezes/holds
* update lockfile for {"polkadot", "substrate"}
* Fix test
ED cannot be zero anymore.
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix test
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: parity-processbot <>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Initial network interface preparations
* Implement get_storage_by_key
* Implement `validators` and `session_index_for_child`
* Implement persisted_validation_data and candidate_pending_availability
* Fix method name for persisted_validation_data and add encoded params
* Implement `retrieve_dmq_contents` and `retrieve_all_inbound_hrmp_channel_contents`
* Implement `prove_read`
* Introduce separate RPC client, expose JsonRpSee errors
* Simplify closure in call_remote_runtime_function
* Implement import stream, upgrade JsonRpSee
* Implement finality stream
* Remove unused method from interface
* Implement `is_major_syncing`
* Implement `wait_on_block`
* Fix tests
* Unify error handling `ApiError`
* Replace WaitError with RelayChainError
* Wrap BlockChainError in RelayChainError
* Unify error handling in relay chain intefaces
* Fix return type of proof method
* Improve error handling of new methods
* Improve error handling and move logging outside of interface
* Clean up
* Remove unwanted changes, clean up
* Remove unused import
* Add format for StatemachineError and remove nused From trait
* Use 'thiserror' crate to simplify error handling
* Expose error for overseer, further simplify error handling
* Reintroduce network interface
* Implement cli option
* Adjust call_state method to use hashes
* Disable PoV recovery when RPC is used
* Add integration test for network full node
* Use Hash instead of BlockId to ensure compatibility with RPC interface
* Fix cargo check warnings
* Implement retries
* Remove `expect` statements from code
* Update jsonrpsee to 0.8.0 and make collator keys optional
* Make cli arguments conflicting
* Remove unused `block_status` method
* Add clippy fixes
* Cargo fmt
* Validate relay chain rpc url
* Clean up dependencies and add one more integration test
* Clean up
* Clean up dependencies of relay-chain-network
* Use hash instead of blockid for rpc methods
* Fix tests
* Update client/cli/src/lib.rs
Co-authored-by: Koute <koute@users.noreply.github.com>
* Improve error message of cli validation
* Add rpc client constructor
* Do not use debug formatting for errors
* Improve logging for remote runtime methods
* Only retry on transport problems
* Use PHash by value, rename test
* Improve tracing, return error on relay-chain-interface build
* Fix naming, use generics instead of deserializing manually
* Rename RelayChainLocal and RelayChainNetwork
* lock
* Format
* Use impl trait for encodable runtime payload
* Only instantiate full node in tests when we need it
* Upgrade scale-codec to 3.0.0
* Improve expect log
Co-authored-by: Koute <koute@users.noreply.github.com>
* Adds support for returning a custom header from `validate_block`
This adds support for returning a custom header from `validate_block`. Before this, we always
returned the header of the block that was validated (and still do it by default). However, after
this pr it is possible to set a custom header or better custom head data that will be returned
instead from `validate_block`. This can be for example when a chain wants to fork.
* FMT
Sebastian Kunert