[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.
Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.
I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`--out-peers 200`), networking CPU
usage goes down from ~110% to ~30% (80 pp) and for normal load
(`--out-peers 40`), the usage goes down from ~55% to ~18% (37 pp).
These should not be taken as final numbers because:
a) there are still some low-hanging optimization fruits, such as
enabling [receive window
auto-tuning](https://github.com/libp2p/rust-yamux/pull/176), integrating
`Peerset` more closely with `litep2p` or improving memory usage of the
WebSocket transport
b) fixing bugs/instabilities that incorrectly cause `litep2p` to do less
work will increase the networking CPU usage
c) verification in a more diverse set of tests/conditions is needed
Nevertheless, these numbers should give an early estimate for CPU usage
of the new networking backend.
This PR consists of three separate changes:
* introduce a generic `PeerId` (wrapper around `Multihash`) so that we
don't have use `NetworkService::PeerId` in every part of the code that
uses a `PeerId`
* introduce `NetworkBackend` trait, implement it for the libp2p network
stack and make Polkadot SDK generic over `NetworkBackend`
* implement `NetworkBackend` for litep2p
The new library should be considered experimental which is why
`rust-libp2p` will remain as the default option for the time being. This
PR currently depends on the master branch of `litep2p` but I'll cut a
new release for the library once all review comments have been
addresses.
---------
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexandru Vasile <alexandru.vasile@parity.io>
Working towards migrating the `parity-bridges-common` repo inside
`polkadot-sdk`. This PR upgrades some dependencies in order to align
them with the versions used in `parity-bridges-common`
Related to
https://github.com/paritytech/parity-bridges-common/issues/2538
Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.
```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"
# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix
# And format the changes:
$ taplo format --config .config/taplo.toml
```
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace
Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.
I am using a tool to do this, so its mostly a test to see that it works
as expected.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.
If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html
@ggwpez, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.
TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
* update libp2p to 0.52.0
* proto name now must implement `AsRef<str>`
* update libp2p version everywhere
* ToSwarm, FromBehaviour, ToBehaviour
also LocalProtocolsChange and RemoteProtocolsChange
* new NetworkBehaviour invariants
* replace `Vec<u8>` with `StreamProtocol`
* rename ConnectionHandlerEvent::Custom to NotifyBehaviour
* remove DialError & ListenError invariants
also fix pending_events
* use connection_limits::Behaviour
See https://github.com/libp2p/rust-libp2p/pull/3885
* impl `void::Void` for `BehaviourOut`
also use `Behaviour::with_codec`
* KademliaHandler no longer public
* fix StreamProtocol construction
* update libp2p-identify to 0.2.0
* remove non-existing methods from PollParameters
rename ConnectionHandlerUpgrErr to StreamUpgradeError
* `P2p` now contains `PeerId`, not `Multihash`
* use multihash-codetable crate
* update Cargo.lock
* reformat text
* comment out tests for now
* remove `.into()` from P2p
* confirm observed addr manually
See https://github.com/libp2p/rust-libp2p/blob/master/protocols/identify/CHANGELOG.md#0430
* remove SwarmEvent::Banned
since we're not using `ban_peer_id`, this can be safely removed.
we may want to introduce `libp2p::allow_block_list` module in the future.
* fix imports
* replace `libp2p` with smaller deps in network-gossip
* bring back tests
* finish rewriting tests
* uncomment handler tests
* Revert "uncomment handler tests"
This reverts commit 720a06815887f4e10767c62b58864a7ec3a48e50.
* add a fixme
* update Cargo.lock
* remove extra From
* make void uninhabited
* fix discovery test
* use autonat protocols
confirming external addresses manually is unsafe in open networks
* fix SyncNotificationsClogged invariant
* only set server mode manually in tests
doubt that we need to set it on node since we're adding public addresses
* address @dmitry-markin comments
* remove autonat
* removed unused var
* fix EOL
* update smallvec and sha2
in attempt to compile polkadot
* bump k256
in attempt to build cumulus
---------
Co-authored-by: parity-processbot <>
* client/network: upgrade to libp2p 0.51.0
* make discovery.rs compile
* make peer_info.rs compile
* changes to notifications and request-response proto
* make service.rs compile
* towards making request_responses.rs compile
* make request_responses.rs compile
* make request_responses.rs compile
* fix notifications/behaviour.rs tests
* fix warnings
* remove old code
* allow deprecated code (temporary)
* upgrade to libp2p 0.51.1
* add TODO for behaviour tests
* return empty vec if peer_id is absent
https://github.com/paritytech/substrate/pull/13587#discussion_r1141695167
fyi: I don't really know what the old behaviour was.
* update comment to reflect new defaults
Closes#13338
* Revert "update comment to reflect new defaults"
This reverts commit 7a981abd69308e9d522ec94905f181439a1b1dba.
* remove config.rs (from wrong merge)
* upgrade to libp2p 0.51.2
* fix formatting
* use handle_pending_outbound_connection in networt_state RPC
* update deps
* use re-exports when we use other libp2p packages
* Apply suggestions from code review
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* format code
* handle potential errors in network_state RPC
* only update libp2p crate
* update libp2p-core
* fix docs
* use libp2p-identity instead of libp2p
where it's possible. libp2p-identity is much smaller, hence makes sense
to use it instead of larger libp2p crate.
* Update client/network/src/discovery.rs
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
* update Cargo.lock
* add comment for per_connection_event_buffer_size
current value is somewhat arbitrary and needs to be tweaked depending on
memory usage and network worker sleep stats.
* fix link format
* update Cargo.lock
* upgrade to libp2p 0.51.3
* deprecate mplex
* Revert "deprecate mplex"
This reverts commit 9e25820e706e464a0e962a8604861fcb2a7641eb.
* Revert "upgrade to libp2p 0.51.3"
This reverts commit 6544dd4138e2f89517bd7c7281fc78a638ec7040.
* use new libp2p version in `statement` crate
* pin version temporarily
* libp2p 0.51.3
* deprecate mplex
* deprecate legacy noise handshake
* fix build error
* update libp2p-identity
* enable libp2p-identity:ed25519 feature in sc-consensus
* enable ed25519 for peerset as well
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
Co-authored-by: parity-processbot <>
* Move service tests to `client/network/tests`
These tests depend on `sc-network` and `sc-network-sync` so they should
live outside the crate.
* Move some configs from `sc-network-common` to `sc-network`
* Move `NetworkService` traits to `sc-network`
* Move request-responses to `sc-network`
* Remove more stuff
* Remove rest of configs from `sc-network-common` to `sc-network`
* Remove more stuff
* Fix warnings
* Update client/network/src/request_responses.rs
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Fix cargo doc
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* upgrade libp2p to 0.50.0
* on_swarm_event and on_connection_handler_event
* replace `Swarm::new` with `Swarm::with_threadpool_executor`
* on_swarm_event and on_connection_handler_event part 2
* on_swarm_event and on_connection_handler_event part 3
* on_swarm_event and on_connection_handler_event part 4
* update libp2p
* libp2p 0.50.0
* rename OutboundQueryCompleted to OutboundQueryProgressed
refs https://github.com/libp2p/rust-libp2p/pull/2712
* remove unused var
* accumulate outbound_query_records until query is finished
* format code
* use p_handler instead of new_handler
https://github.com/paritytech/substrate/pull/12734#discussion_r1027640610
* pass ListenFailure to kademlia
https://github.com/paritytech/substrate/pull/12734#discussion_r1034716664
* use tokio executor in tests
https://github.com/paritytech/substrate/pull/12734#discussion_r1039291776
* use chrono Local::now
instead of deprecated Local::today
* remove unused vars from request_responses tests
* attempt to fix pallet UI tests
* restart CI
* restart CI
* restart CI
* restart CI
* restart CI
* restart CI
* restart CI
* restart CI
* cargo upgrade libp2p
* Get rid of `NetworkBehaviourEventProcess` in handling of `CustomMessageOutcome`
* Get rid of `NetworkBehaviourEventProcess` in handling of `request_responses::Event`
* Get rid of `NetworkBehaviourEventProcess` in handling of `peer_info::PeerInfoEvent`
* Get rid of `NetworkBehaviourEventProcess` in handling of `DiscoveryOut`
* Get rid of `poll()` method in `Bahaviour`
* minor: comments
* Upgrade libp2p to 0.49.0 (unreleased)
* Support multiple Kad protocol names
* Make borrow checker happy
* minor: wording
* Make substrate build with libp2p-0.49.0
* rustfmt
* Get rid of MdnsWrapper
* Resolve deprecation warnings
* Fix documentation
* Apply suggestions from code review: fix typos
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
* Apply suggestion: simplify kad protocol name matching
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
* Move `MultiaddrWithPeerId` and related parsing functions into `sc-network-common`, remove dependency on `sc-network` from `sc-chain-spec`
* Remove dependency on `sc-network` from `sc-offchain`
* Remove dependency on `sc-network` from `sc-network-gossip`
* Extract `NetworkKVProvider` trait in `sc-authority-discovery` and remove unnecessary dependency
* Extract `NetworkSyncForkRequest` trait in `sc-finality-grandpa`
* Relax requirements on `SyncOracle` trait, remove extra native methods from `NetworkService` that are already provided by trait impls
* Move `NetworkSigner` trait from `sc-authority-discovery` into `sc-network-common` and de-duplicate methods on `NetworkService`
* Move `NetworkKVProvider` trait from `sc-authority-discovery` into `sc-network-common` and de-duplicate methods on `NetworkService`
* Minimize `sc-authority-discovery` dependency on `sc-network`
* Move `NetworkSyncForkRequest` trait from `sc-finality-grandpa` to `sc-network-common` and de-duplicate methods in `NetworkService`
* Extract `NetworkStatusProvider` trait and de-duplicate methods on `NetworkService`
* Extract `NetworkPeers` trait and de-duplicate methods on `NetworkService`
* Extract `NetworkEventStream` trait and de-duplicate methods on `NetworkService`
* Move more methods from `NetworkService` into `NetworkPeers` trait
* Move `NetworkStateInfo` trait into `sc-network-common`
* Extract `NetworkNotification` trait and de-duplicate methods on `NetworkService`
* Extract `NetworkRequest` trait and de-duplicate methods on `NetworkService`
* Remove `NetworkService::local_peer_id()`, it is already provided by `NetworkStateInfo` impl
* Extract `NetworkTransaction` trait and de-duplicate methods on `NetworkService`
* Extract `NetworkBlock` trait and de-duplicate methods on `NetworkService`
* Remove dependencies on `NetworkService` from most of the methods of `sc-service`
* Address simple review comments
* Upgrade to libp2p 0.45.1
* Limit max_negotiating_inbound_streams to 512
* Upgrade prost-build to 0.10
* Set max_negotiating_inbound_streams to 2048
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix authority discovery protobuf
* Fix comments in authority-discovery schema
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Add a comment about transport initialization
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Upgraded dependencies
* Adapting code to scale v3
* Empty commit to trigger CI
* Triggering CI
* Fixing UI test
* Remove superfluous dev-dep added by #9228
* Cryout for CI
* Introduce `SecretUri`
* `inspect-key`: Adds support for `expect-public`
`expect-public` can be used to check that a given secret uri corresponds to the given public key.
This is mainly useful when the secret uri is protected by a password and a new derived account
should be generated. With `--expect-public` the user can pass the public key/account-id of the
"base" secret uri aka the one without any derivation to ensure the correct password was inserted.
* Fixes
* 🤦
* Apply suggestions from code review
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
* Review feedback
* FMT
* Bump the versions
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
Aaro Altonen