**Update:** Pushed additional changes based on the review comments.
**This pull request fixes various spelling mistakes in this
repository.**
Most of the changes are contained in the first **3** commits:
- `Fix spelling mistakes in comments and docs`
- `Fix spelling mistakes in test names`
- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`
Other source code spelling mistakes are separated into individual
commits for easier reviewing:
- `Fix the spelling of 'authority'`
- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`
- `Fix the spelling of 'prev_enqueud_messages'`
- `Fix the spelling of 'endpoint'`
- `Fix the spelling of 'children'`
- `Fix the spelling of 'PenpalSiblingSovereignAccount'`
- `Fix the spelling of 'PenpalSudoAccount'`
- `Fix the spelling of 'insufficient'`
- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`
- `Fix the spelling of 'subtracted'`
- `Fix the spelling of 'CandidatePendingAvailability'`
- `Fix the spelling of 'exclusive'`
- `Fix the spelling of 'until'`
- `Fix the spelling of 'discriminator'`
- `Fix the spelling of 'nonexistent'`
- `Fix the spelling of 'subsystem'`
- `Fix the spelling of 'indices'`
- `Fix the spelling of 'committed'`
- `Fix the spelling of 'topology'`
- `Fix the spelling of 'response'`
- `Fix the spelling of 'beneficiary'`
- `Fix the spelling of 'formatted'`
- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`
- `Fix the spelling of 'succeeded'`
- `Fix the spelling of 'reopened'`
- `Fix the spelling of 'proposer'`
- `Fix the spelling of 'InstantiationNonce'`
- `Fix the spelling of 'depositor'`
- `Fix the spelling of 'expiration'`
- `Fix the spelling of 'phantom'`
- `Fix the spelling of 'AggregatedKeyValue'`
- `Fix the spelling of 'randomness'`
- `Fix the spelling of 'defendant'`
- `Fix the spelling of 'AquaticMammal'`
- `Fix the spelling of 'transactions'`
- `Fix the spelling of 'PassingTracingSubscriber'`
- `Fix the spelling of 'TxSignaturePayload'`
- `Fix the spelling of 'versioning'`
- `Fix the spelling of 'descendant'`
- `Fix the spelling of 'overridden'`
- `Fix the spelling of 'network'`
Let me know if this structure is adequate.
**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.
~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~
~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~
~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~
**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.
~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~
Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace
Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.
I am using a tool to do this, so its mostly a test to see that it works
as expected.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
# Note for reviewer
Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.
# Description
Added XCMv4.
## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation
In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.
## Removed `Abstract` asset id
It was not being used anywhere and this simplifies the code.
Now assets are just constructed as follows:
```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```
No need for specifying `Concrete` anymore.
## Outcome is now a named fields struct
Instead of
```rust
pub enum Outcome {
Complete(Weight),
Incomplete(Weight, Error),
Error(Error),
}
```
we now have
```rust
pub enum Outcome {
Complete { used: Weight },
Incomplete { used: Weight, error: Error },
Error { error: Error },
}
```
## Added Reanchorable trait
Now both locations and assets implement this trait, making it easier to
reanchor both.
## New syntax for building locations and junctions
Now junctions are built using the following methods:
```rust
let location = Location {
parents: 1,
interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```
or
```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```
And they are matched like so:
```rust
match location.unpack() {
(1, [Parachain(id)]) => ...
(0, Here) => ...,
(1, [_]) => ...,
}
```
This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.
This was needed to make all sizes smaller.
# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id
---------
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
Many clippy lints usually enforced by `-Dcomplexity` and `-Dcorrectness`
are not caught by CI as they are gated by `features`, like
`runtime-benchmarks`, while the clippy CI job runs with only the default
features for all targets.
This PR also adds a CI step to run clippy with `--all-features` to
ensure the code quality is maintained behind feature gates from now on.
To improve local development, clippy lints are downgraded to warnings,
but they still will result in an error at CI due to the `-Dwarnings`
rustflag.
---------
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
This PR adds [Rococo
People](https://github.com/paritytech/polkadot-sdk/pull/2281) <> [Rococo
Bulletin](https://github.com/zdave-parity/polkadot-bulletin-chain) to
the Rococo Bridge Hub code. There's a couple of things left to do here:
- [x] add remaining tests - it'd need some refactoring in the
`bridge-hub-test-utils` - will do in a separate PR;
- [x] actually run benchmarks for new messaging pallet (do we have bot
nowadays?).
The reason why I'm opening it before this ^^^ is ready, is that I'd like
to hear others opinion on how to deal with hacks with that bridge.
Initially I was assuming that Rococo Bulletin will be the 1:1 copy of
the Polkadot Bulletin (to avoid maintaining multiple
runtimes/releases/...), so you can see many `PolkadotBulletin` mentions
in this PR, even though we are going to bridge with the parallel chain
(`RococoBulletin`). That's because e.g. pallet names from
`construct_runtime` are affecting runtime storage keys and bridges are
using runtime storage proofs => it is important to use names that the
Bulletin chain expects.
But in the end, this hack won't work - we can't use Polkadot Bulletin
runtime to bridge with Rococo Bridge Hub, because Polkadot Bulletin
expects Polkadot Bridge hub to use `1002` parachain id and Rococo Bridge
Hub seats on the `1013`. This also affects storage keys using in
bridging, so I had to add the [`rococo`
feature](https://github.com/svyatonik/polkadot-bulletin-chain/blob/add-bridge-pallets/runtime/Cargo.toml#L198)
to the Bulletin chain. So now we can actually alter its runtime and
adapt it for Rococo.
So the question here is - what's better for us here
- to leave everything as is (seems hacky and non-trivial);
- change Bulletin chain runtime when `rococo` feature is used - e.g. use
proper names there (`WithPolkadotGrandpa` -> `WithRococoGrandpa`, ...)
- add another set of pallets to the Bulletin chain runtime to bridge
with Rococo and never use them in production. Similar to hack that we
had in Rococo/Wococo
cc @acatangiu @bkontur @serban300
also cc @joepetrowski as the main "client" of this bridge
---
A couple words on how this bridge is different from the Rococo <>
Westend bridge:
- it is a bridge with a chain that uses GRANDPA finality, not the
parachain finality (hence the tests needs to be changed);
- it is a fee-free bridge. So
`AllowExplicitUnpaidExecutionFrom<Equals<SiblingPeople>>` + we are not
paying any rewards to relayers (apart from compensating transaction
costs).
---------
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com>
Co-authored-by: Egor_P <egor@parity.io>
Co-authored-by: command-bot <>
We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
## Summary
This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.
## Problem/Motivation
The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.
In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).
2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471aa0210f0ac9903bdd7d8f9351f9a635f/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.
However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
```
/// Just a simulation of possible error, which could happen on BHW
/// (this code is based on actual master without XCMv4)
let encoded = hex_literal::hex!("0400");
println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));
Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
```
- Similar compatibility issues exist between AHR and AHW.
## Solution
This pull request introduces the following solutions:
1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.
2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.
3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.
These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.
## Possible alternative solution
_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._
Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.
```
ExportMessage {
network: NetworkId,
destination: InteriorMultiLocation,
xcm: Xcm<()>
destination_xcm_version: Version, // <- new attritbute
},
```
```
pub trait ExportXcm {
fn validate(
network: NetworkId,
channel: u32,
universal_source: &mut Option<InteriorMultiLocation>,
destination: &mut Option<InteriorMultiLocation>,
message: &mut Option<Xcm<()>>,
destination_xcm_version: Version, , // <- new attritbute
) -> SendResult<Self::Ticket>;
```
## Future Directions
This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.
## TODO
- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d05f9b510f979a0cc3c7847707bacba2e/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc
Part of: https://github.com/paritytech/parity-bridges-common/issues/2719
---------
Co-authored-by: command-bot <>
Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.
If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html
@ggwpez, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.
TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
## Summary
Asset bridging support for AssetHub**Rococo** <-> AssetHub**Wococo** was
added [here](https://github.com/paritytech/polkadot-sdk/pull/1215), so
now we aim to bridge AssetHub**Rococo** and AssetHub**Westend**. (And
perhaps retire AssetHubWococo and the Wococo chains).
## Solution
**bridge-hub-westend-runtime**
- added new runtime as a copy of `bridge-hub-rococo-runtime`
- added support for bridging to `BridgeHubRococo`
- added tests and benchmarks
**bridge-hub-rococo-runtime**
- added support for bridging to `BridgeHubWestend`
- added tests and benchmarks
- internal refactoring by splitting bridge configuration per network,
e.g., `bridge_to_whatevernetwork_config.rs`.
**asset-hub-rococo-runtime**
- added support for asset bridging to `AssetHubWestend` (allows to
receive only WNDs)
- added new xcm router for `Westend`
- added tests and benchmarks
**asset-hub-westend-runtime**
- added support for asset bridging to `AssetHubRococo` (allows to
receive only ROCs)
- added new xcm router for `Rococo`
- added tests and benchmarks
## Deployment
All changes will be deployed as a part of
https://github.com/paritytech/polkadot-sdk/issues/1988.
## TODO
- [x] benchmarks for all pallet instances
- [x] integration tests
- [x] local run scripts
Relates to:
https://github.com/paritytech/parity-bridges-common/issues/2602
Relates to: https://github.com/paritytech/polkadot-sdk/issues/1988
---------
Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
closes https://github.com/paritytech/polkadot-sdk/issues/1882
## Breaking Changes
This PR introduces a new item to `pallet_balances::Config`:
```diff
trait Config {
++ type RuntimeFreezeReasons;
}
```
This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.
In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.
This requires: https://github.com/paritytech/scale-info/pull/197
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
This commit adds Rococo Asset Hub dedicated runtime so we can test new
features here, before merging them in Kusama Asset Hub.
Also adds one such feature: asset transfer over bridge (Rococo AssetHub
<> Wococo AssetHub)
- clone `asset-hub-kusama-runtime` -> `asset-hub-rococo-runtime`
- make it use Rococo primitives, names, assets, constants, etc
- add asset-transfer-over-bridge support to Rococo AssetHub <> Wococo
AssetHub
Fixes#1128
---------
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
## Summary
This PR introduces several enhancements.
The current implementation of `NetworkExportTable` lacks remote location
filtering support beyond `NetworkId` lookup. To provide more control and
granularity, it's essential to allow configuration for bridging to
different consensus `NetworkId` while restricting access e.g. to
particular remote parachains.
Additionally, the `StartsWith` and `Equals` and
`StartsWithExplicitGlobalConsensus` helper functions, which are in
active use, are moved to the `xcm-builder` and `frame_support` modules
for better code organization.
Adds a new `LocationWithAssetFilters` filter to enable location-based
and asset-related filtering. This filter is useful for configuring the
`pallet_xcm` filter for
[XcmTeleportFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L212)
and
[XcmReserveTransferFilter](https://github.com/paritytech/polkadot-sdk/blob/master/polkadot/xcm/pallet-xcm/src/lib.rs#L216)
to restrict specific assets.
Furthermore, the `BridgeMessage` fields are not accessible outside of
`xcm-builder`, limiting the ability to create custom logic dependent on
it.
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Serban Iorga