I found out during the cleanup of this deprecation message in the
`polkadot-fellows` repository that we deprecated `CurrencyAdapter`
without making the recommended changes.
## TODO
- [ ] fix `polkadot-fellows` bump to 1.6.0
https://github.com/polkadot-fellows/runtimes/pull/159
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
## Problem
The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.
It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.
**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
/// from pallet_nis
#[pallet::composite_enum]
pub enum HoldReason {
NftReceipt,
}
/// from pallet_preimage
#[pallet::composite_enum]
pub enum HoldReason {
Preimage,
}
// from pallet_state-trie-migration
#[pallet::composite_enum]
pub enum HoldReason {
SlashForContinueMigrate,
SlashForMigrateCustomTop,
SlashForMigrateCustomChild,
}
```
- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {
#[codec(index = 32u8)]
Preimage(pallet_preimage::HoldReason),
#[codec(index = 38u8)]
Nis(pallet_nis::HoldReason),
#[codec(index = 42u8)]
StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```
- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)
However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
```
// pseudo-code - if we try to call all of these:
T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;
// With `type MaxHolds = ConstU32<3>` these two will fail
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
```
## Solutions
A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.
The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {
#[pallet::composite_enum]
pub enum HoldReason {
ModuleSingleInstanceReason1,
ModuleSingleInstanceReason2,
}
...
}
#[frame_support::pallet(dev_mode)]
mod module_multi_instance {
#[pallet::composite_enum]
pub enum HoldReason<I: 'static = ()> {
ModuleMultiInstanceReason1,
ModuleMultiInstanceReason2,
ModuleMultiInstanceReason3,
}
...
}
impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
for RuntimeHoldReason
{
const VARIANT_COUNT: u32 = 0
+ module_single_instance::HoldReason::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```
In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.
## For reviewers
Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs`
- `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
- `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`
And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`
## Next steps
Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.
---------
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
The `parachains-common` contains a lots of constants and type
definitions which are used for `polkadot-sdk`'s testnet runtimes and
also for `polkadot-fellows`'s production [SP
runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants).
This PR cleans `parachains-common` module to contain only common and
generic functionality.
Testnet-specific constants have been moved to the separate module
dedicated just for testnets:
`polkadot-sdk/cumulus/parachains/runtimes/constants/`
Part of: https://github.com/paritytech/polkadot-sdk/issues/3054
---------
Co-authored-by: georgepisaltu <george.pisaltu@parity.io>
Reverts paritytech/polkadot-sdk#2302. 🤦♂️ should have checked the
migration CI first.
We either need to reduce the `max_message_size` for the open HRMP
channels on the failing chains or increase the `PageSize` of the XCMP
queue.
Both would be fine on a test-net, but i assume this will also fail
before the next SP runtime upgrade so first need to think what best to
do.
AFAIK its not possible currently to change the `max_message_size` of an
open HRMP channel.
Remove `without_storage_info` from the XCMP queue pallet. Part of
https://github.com/paritytech/polkadot-sdk/issues/323
Changes:
- Limit the number of channels that can be suspended at the same time.
- Limit the number of channels that can have messages or signals pending
at the same time.
A No-OP migration is put in place to ensure that all `BoundedVec`s still
decode and not truncate after upgrade. The storage version is thereby
bumped to 4 to have our tooling remind us to deploy that migration.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
There were several improvements and PRs that didn't apply to all
runtimes, so this PR attempts to align those small differences. In
addition, the PR eliminates unused dependencies across multiple modules.
Relates to PR for `polkadot-fellows`:
https://github.com/polkadot-fellows/runtimes/pull/154
This PR backports version bumps from release branch
`release-polkadot-v1.6.0` back to `master` and also moved `prdoc` files
related to the release to the appropriate folder
# Note for reviewer
Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.
# Description
Added XCMv4.
## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation
In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.
## Removed `Abstract` asset id
It was not being used anywhere and this simplifies the code.
Now assets are just constructed as follows:
```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```
No need for specifying `Concrete` anymore.
## Outcome is now a named fields struct
Instead of
```rust
pub enum Outcome {
Complete(Weight),
Incomplete(Weight, Error),
Error(Error),
}
```
we now have
```rust
pub enum Outcome {
Complete { used: Weight },
Incomplete { used: Weight, error: Error },
Error { error: Error },
}
```
## Added Reanchorable trait
Now both locations and assets implement this trait, making it easier to
reanchor both.
## New syntax for building locations and junctions
Now junctions are built using the following methods:
```rust
let location = Location {
parents: 1,
interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```
or
```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```
And they are matched like so:
```rust
match location.unpack() {
(1, [Parachain(id)]) => ...
(0, Here) => ...,
(1, [_]) => ...,
}
```
This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.
This was needed to make all sizes smaller.
# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id
---------
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
In the move from the old `Currency` traits to the new `fungible/s`
family of traits, we already had the `FungiblesAdapter` and
`NonFungiblesAdapter` for multiple fungible and non fungible assets
respectively. However, for handling only one fungible asset, we were
missing a `FungibleAdapter`, and so used the old `CurrencyAdapter`
instead. This PR aims to fill in that gap, and provide the new adapter
for more updated examples.
I marked the old `CurrencyAdapter` as deprecated as part of this PR, and
I'll change it to the new `FungibleAdapter` in a following PR.
The two stages are separated so as to not bloat this PR with some name
fixes in tests.
---------
Co-authored-by: command-bot <>
We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
This PR introduces a script and some templates to use the prdoc involved
in a release and build:
- the changelog
- a simple draft of audience documentation
Since the prdoc presence was enforced in the middle of the version
1.5.0, not all PRs did come with a `prdoc` file.
This PR creates all the missing `prdoc` files with some minimum content
allowing to properly generate the changelog.
The generated content is **not** suitable for the audience
documentation.
The audience documentation will be possible with the next version, when
all PR come with a proper `prdoc`.
## Assumptions
- the prdoc files for release `vX.Y.Z` have been moved under
`prdoc/X.Y.Z`
- the changelog requires for now for the prdoc files to contain author +
topic. Thos fields are optional.
The build script can be called as:
```
VERSION=X.Y.Z ./scripts/release/build-changelogs.sh
```
Related:
- #1408
---------
Co-authored-by: EgorPopelyaev <egor@parity.io>
Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.
If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html
@ggwpez, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.
TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
## Overview
This PR aligns the `spec_version` formatting to the [recent
changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142)
made for the Polkadot/Kusama runtimes.
It also backports the latest version `v1.4.0` bumps as `1_004_000`.
## Details
During the switch from `v0.9` to `v1.x`, the format of the
`spec_version` was modified from: `(M)m_ppp` for a runtime considered on
version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`.
With the transition to `v1.x`, the format was changed to a bigger number
(still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as
`01_02_003`.
This PR aligns the format with that has been introduced in the
fellowship repo: `MMM_mmm_ppp`.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
## Motivation
`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.
While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.
## Solution
This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.
Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.
All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.
#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).
Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
(imported from https://github.com/paritytech/cumulus/pull/2157)
## Changes
This MR refactores the XCMP, Parachains System and DMP pallets to use
the [MessageQueue](https://github.com/paritytech/substrate/pull/12485)
for delayed execution of incoming messages. The DMP pallet is entirely
replaced by the MQ and thereby removed. This allows for PoV-bounded
execution and resolves a number of issues that stem from the current
work-around.
All System Parachains adopt this change.
The most important changes are in `primitives/core/src/lib.rs`,
`parachains/common/src/process_xcm_message.rs`,
`pallets/parachain-system/src/lib.rs`, `pallets/xcmp-queue/src/lib.rs`
and the runtime configs.
### DMP Queue Pallet
The pallet got removed and its logic refactored into parachain-system.
Overweight message management can be done directly through the MQ
pallet.
Final undeployment migrations are provided by
`cumulus_pallet_dmp_queue::UndeployDmpQueue` and `DeleteDmpQueue` that
can be configured with an aux config trait like:
```rust
parameter_types! {
pub const DmpQueuePalletName: &'static str = \"DmpQueue\" < CHANGE ME;
pub const RelayOrigin: AggregateMessageOrigin = AggregateMessageOrigin::Parent;
}
impl cumulus_pallet_dmp_queue::MigrationConfig for Runtime {
type PalletName = DmpQueuePalletName;
type DmpHandler = frame_support::traits::EnqueueWithOrigin<MessageQueue, RelayOrigin>;
type DbWeight = <Runtime as frame_system::Config>::DbWeight;
}
// And adding them to your Migrations tuple:
pub type Migrations = (
...
cumulus_pallet_dmp_queue::UndeployDmpQueue<Runtime>,
cumulus_pallet_dmp_queue::DeleteDmpQueue<Runtime>,
);
```
### XCMP Queue pallet
Removed all dispatch queue functionality. Incoming XCMP messages are now
either: Immediately handled if they are Signals, enqueued into the MQ
pallet otherwise.
New config items for the XCMP queue pallet:
```rust
/// The actual queue implementation that retains the messages for later processing.
type XcmpQueue: EnqueueMessage<ParaId>;
/// How a XCM over HRMP from a sibling parachain should be processed.
type XcmpProcessor: ProcessMessage<Origin = ParaId>;
/// The maximal number of suspended XCMP channels at the same time.
#[pallet::constant]
type MaxInboundSuspended: Get<u32>;
```
How to configure those:
```rust
// Use the MessageQueue pallet to store messages for later processing. The `TransformOrigin` is needed since
// the MQ pallet itself operators on `AggregateMessageOrigin` but we want to enqueue `ParaId`s.
type XcmpQueue = TransformOrigin<MessageQueue, AggregateMessageOrigin, ParaId, ParaIdToSibling>;
// Process XCMP messages from siblings. This is type-safe to only accept `ParaId`s. They will be dispatched
// with origin `Junction::Sibling(…)`.
type XcmpProcessor = ProcessFromSibling<
ProcessXcmMessage<
AggregateMessageOrigin,
xcm_executor::XcmExecutor<xcm_config::XcmConfig>,
RuntimeCall,
>,
>;
// Not really important what to choose here. Just something larger than the maximal number of channels.
type MaxInboundSuspended = sp_core::ConstU32<1_000>;
```
The `InboundXcmpStatus` storage item was replaced by
`InboundXcmpSuspended` since it now only tracks inbound queue suspension
and no message indices anymore.
Now only sends the most recent channel `Signals`, as all prio ones are
out-dated anyway.
### Parachain System pallet
For `DMP` messages instead of forwarding them to the `DMP` pallet, it
now pushes them to the configured `DmpQueue`. The message processing
which was triggered in `set_validation_data` is now being done by the MQ
pallet `on_initialize`.
XCMP messages are still handed off to the `XcmpMessageHandler`
(XCMP-Queue pallet) - no change here.
New config items for the parachain system pallet:
```rust
/// Queues inbound downward messages for delayed processing.
///
/// Analogous to the `XcmpQueue` of the XCMP queue pallet.
type DmpQueue: EnqueueMessage<AggregateMessageOrigin>;
```
How to configure:
```rust
/// Use the MQ pallet to store DMP messages for delayed processing.
type DmpQueue = MessageQueue;
```
## Message Flow
The flow of messages on the parachain side. Messages come in from the
left via the `Validation Data` and finally end up at the `Xcm Executor`
on the right.
## Further changes
- Bumped the default suspension, drop and resume thresholds in
`QueueConfigData::default()`.
- `XcmpQueue::{suspend_xcm_execution, resume_xcm_execution}` errors when
they would be a noop.
- Properly validate the `QueueConfigData` before setting it.
- Marked weight files as auto-generated so they wont auto-expand in the
MR files view.
- Move the `hypothetical` asserts to `frame_support` under the name
`experimental_hypothetically`
Questions:
- [ ] What about the ugly `#[cfg(feature = \"runtime-benchmarks\")]` in
the runtimes? Not sure how to best fix. Just having them like this makes
tests fail that rely on the real message processor when the feature is
enabled.
- [ ] Need a good weight for `MessageQueueServiceWeight`. The scheduler
already takes 80% so I put it to 10% but that is quite low.
TODO:
- [x] Remove c&p code after
https://github.com/paritytech/polkadot/pull/6271
- [x] Use `HandleMessage` once it is public in Substrate
- [x] fix `runtime-benchmarks` feature
https://github.com/paritytech/polkadot/pull/6966
- [x] Benchmarks
- [x] Tests
- [ ] Migrate `InboundXcmpStatus` to `InboundXcmpSuspended`
- [x] Possibly cleanup Migrations (DMP+XCMP)
- [x] optional: create `TransformProcessMessageOrigin` in Substrate and
replace `ProcessFromSibling`
- [ ] Rerun weights on ref HW
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: command-bot <>
closes https://github.com/paritytech/polkadot-sdk/issues/1882
## Breaking Changes
This PR introduces a new item to `pallet_balances::Config`:
```diff
trait Config {
++ type RuntimeFreezeReasons;
}
```
This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.
In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.
This requires: https://github.com/paritytech/scale-info/pull/197
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Combination of paritytech/polkadot#7005, its addon PR
paritytech/polkadot#7585 and its companion paritytech/cumulus#2433.
This PR introduces a new XcmFeesToAccount struct which implements the
`FeeManager` trait, and assigns this struct as the `FeeManager` in the
XCM config for all runtimes.
The struct simply deposits all fees handled by the XCM executor to a
specified account. In all runtimes, the specified account is configured
as the treasury account.
XCM __delivery__ fees are now being introduced (unless the root origin
is sending a message to a system parachain on behalf of the originating
chain).
# Note for reviewers
Most file changes are tests that had to be modified to account for the
new fees.
Main changes are in:
- cumulus/pallets/xcmp-queue/src/lib.rs <- To make it track the delivery
fees exponential factor
- polkadot/xcm/xcm-builder/src/fee_handling.rs <- Added. Has the
FeeManager implementation
- All runtime xcm_config files <- To add the FeeManager to the XCM
configuration
# Important note
After this change, instructions that create and send a new XCM (Query*,
Report*, ExportMessage, InitiateReserveWithdraw, InitiateTeleport,
DepositReserveAsset, TransferReserveAsset, LockAsset and RequestUnlock)
will require the corresponding origin account in the origin register to
pay for transport delivery fees, and the onward message will fail to be
sent if the origin account does not have the required amount. This
delivery fee is on top of what we already collect as tx fees in
pallet-xcm and XCM BuyExecution fees!
Wallet UIs that want to expose the new delivery fee can do so using the
formula:
```
delivery_fee_factor * (base_fee + encoded_msg_len * per_byte_fee)
```
where the delivery fee factor can be obtained from the corresponding
pallet based on which transport you are using (UMP, HRMP or bridges),
the base fee is a constant, the encoded message length from the message
itself and the per byte fee is the same as the configured per byte fee
for txs (i.e. `TransactionByteFee`).
---------
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Giles Cope <gilescope@gmail.com>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Enable `runtime-benchmarks` feature for `parachain-common` and
`cumulus-primitives-utility` crates' dependencies.
After adding `runtime-benchmarks = []` under `features` category in
`Cargo.toml` files for the creates, I did run,
> zepter lint propagate-feature --feature runtime-benchmarks --workspace
--fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking"
This changes required for
https://github.com/paritytech/polkadot-sdk/pull/1333
* Rename `polkadot-parachain` to `polkadot-parachain-primitives`
While doing this it also fixes some last `rustdoc` issues and fixes
another Cargo warning related to `pallet-paged-list`.
* Fix compilation
* ".git/.scripts/commands/fmt/fmt.sh"
* Fix XCM docs
---------
Co-authored-by: command-bot <>
* Rename squatted crates
This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io.
Using the staging- prefix is a temp fix until we decide on replacement names.
https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6
* Fix test after crate renames
* Update Lockfile
* Set test crates to nopublish
* Don't publish more crates
* Set even more crates to nopublish
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update substrate & polkadot
* min changes to make async backing compile
* (async backing) parachain-system: track limitations for unincluded blocks (#2438)
* unincluded segment draft
* read para head from storage proof
* read_para_head -> read_included_para_head
* Provide pub interface
* add errors
* fix unincluded segment update
* BlockTracker -> Ancestor
* add a dmp limit
* Read para head depending on the storage switch
* doc comments
* storage items docs
* add a sanity check on block initialize
* Check watermark
* append to the segment on block finalize
* Move segment update into set_validation_data
* Resolve para head todo
* option watermark
* fix comment
* Drop dmq check
* fix weight
* doc-comments on inherent invariant
* Remove TODO
* add todo
* primitives tests
* pallet tests
* doc comments
* refactor unincluded segment length into a ConsensusHook (#2501)
* refactor unincluded segment length into a ConsensusHook
* add docs
* refactor bandwidth_out calculation
Co-authored-by: Chris Sosnin <48099298+slumber@users.noreply.github.com>
* test for limits from impl
* fmt
* make tests compile
* update comment
* uncomment test
* fix collator test by adding parent to state proof
* patch HRMP watermark rules for unincluded segment
* get consensus-common tests to pass, using unincluded segment
* fix unincluded segment tests
* get all tests passing
* fmt
* rustdoc CI
* aura-ext: limit the number of authored blocks per slot (#2551)
* aura_ext consensus hook
* reverse dependency
* include weight into hook
* fix tests
* remove stray println
Co-authored-by: Chris Sosnin <48099298+slumber@users.noreply.github.com>
* fix test warning
* fix doc link
---------
Co-authored-by: Chris Sosnin <48099298+slumber@users.noreply.github.com>
Co-authored-by: Chris Sosnin <chris125_@live.com>
* parachain-system: ignore go ahead signal once upgrade is processed (#2594)
* handle goahead signal for unincluded segment
* doc comment
* add test
* parachain-system: drop processed messages from inherent data (#2590)
* implement `drop_processed_messages`
* drop messages based on relay parent number
* adjust tests
* drop changes to mqc
* fix comment
* drop test
* drop more dead code
* clippy
* aura-ext: check slot in consensus hook and remove all `CheckInherents` logic (#2658)
* aura-ext: check slot in consensus hook
* convert relay chain slot
* Make relay chain slot duration generic
* use fixed velocity hook for pallets with aura
* purge timestamp inherent
* fix warning
* adjust runtime tests
* fix slots in tests
* Make `xcm-emulator` test pass for new consensus hook (#2722)
* add pallets on_initialize
* tests pass
* add AuraExt on_init
* ".git/.scripts/commands/fmt/fmt.sh"
---------
Co-authored-by: command-bot <>
---------
Co-authored-by: Ignacio Palacios <ignacio.palacios.santos@gmail.com>
* update polkadot git refs
* CollationGenerationConfig closure is now optional (#2772)
* CollationGenerationConfig closure is now optional
* fix test
* propagate network-protocol-staging feature (#2899)
* Feature Flagging Consensus Hook Type Parameter (#2911)
* First pass
* fmt
* Added as default feature in tomls
* Changed to direct dependency feature
* Dealing with clippy error
* Update pallets/parachain-system/src/lib.rs
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
---------
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
* fmt
* bump deps and remove warning
* parachain-system: update RelevantMessagingState according to the unincluded segment (#2948)
* mostly address 2471 with a bug introduced
* adjust relevant messaging state after computing total
* fmt
* max -> min
* fix test implementation of xcmp source
* add test
* fix test message sending logic
* fix + test
* add more to unincluded segment test
* fmt
---------
Co-authored-by: Chris Sosnin <chris125_@live.com>
* Integrate new Aura / Parachain Consensus Logic in Parachain-Template / Polkadot-Parachain (#2864)
* add a comment
* refactor client/service utilities
* deprecate start_collator
* update parachain-template
* update test-service in the same way
* update polkadot-parachain crate
* fmt
* wire up new SubmitCollation message
* some runtime utilities for implementing unincluded segment runtime APIs
* allow parachains to configure their level of sybil-resistance when starting the network
* make aura-ext compile
* update to specify sybil resistance levels
* fmt
* specify relay chain slot duration in milliseconds
* update Aura to explicitly produce Send futures
also, make relay_chain_slot_duration a Duration
* add authoring duration to basic collator and document params
* integrate new basic collator into parachain-template
* remove assert_send used for testing
* basic-aura: only author when parent included
* update polkadot-parachain-bin
* fmt
* some fixes
* fixes
* add a RelayNumberMonotonicallyIncreases
* add a utility function for initializing subsystems
* some logging for timestamp adjustment
* fmt
* some fixes for lookahead collator
* add a log
* update `find_potential_parents` to account for sessions
* bound the loop
* restore & deprecate old start_collator and start_full_node functions.
* remove unnecessary await calls
* fix warning
* clippy
* more clippy
* remove unneeded logic
* ci
* update comment
Co-authored-by: Marcin S. <marcin@bytedude.com>
* (async backing) restore `CheckInherents` for backwards-compatibility (#2977)
* bring back timestamp
* Restore CheckInherents
* revert to empty CheckInherents
* make CheckInherents optional
* attempt
* properly end system blocks
* add some more comments
* ignore failing system parachain tests
* update refs after main feature branch merge
* comment out the offending tests because CI runs ignored tests
* fix warnings
* fmt
* revert to polkadot master
* cargo update -p polkadot-primitives -p sp-io
---------
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
Co-authored-by: Ignacio Palacios <ignacio.palacios.santos@gmail.com>
Co-authored-by: Bradley Olson <34992650+BradleyOlson64@users.noreply.github.com>
Co-authored-by: Marcin S. <marcin@bytedude.com>
Co-authored-by: eskimor <eskimor@users.noreply.github.com>
Co-authored-by: Andronik <write@reusable.software>
* Update all uses of pallet-aura to disallow multiple blocks per slot
* use ConstBool
* update lockfile for {"substrate", "polkadot"}
---------
Co-authored-by: parity-processbot <>
* companion for xcm alias origin
* update lockfile for {"polkadot", "substrate"}
* add benchmark function for runtimes
---------
Co-authored-by: parity-processbot <>
* change dir names
* cargo toml updates
* fix crate imports for build
* change chain spec names and PR review rule
* update cli to accept asset-hub
* find/replace benchmark commands
* integration tests
* bridges docs
* more integration tests
* AuraId
* other statemint tidying
* rename statemint mod
* chain spec mod
* rename e2e test dirs
* one more Runtime::Statemine
* benchmark westmint
* rename chain spec name and id
* rename chain spec files
* more tidying in scripts/docs/tests
* rename old dir if exists
* Force people to manually do the move.
(Safer as there could be additional considerations with their setup)
* review touchups
* more renaming
* Update polkadot-parachain/src/command.rs
Co-authored-by: Bastian Köcher <git@kchr.de>
* better error message
* do not break on-chain spec_name
* log info message that path has been renamed
* better penpal docs
---------
Co-authored-by: gilescope <gilescope@gmail.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: parity-processbot <>
Branislav Kontur