* Upgrade to libp2p v0.19
* Listen on IPv6 by default
* Increase channels sizes
* Use spec-compliant noise protocol
* Show legacy PeerId
* Switch order of Noise protocols
* Switch to crates.io version
* Fix subkey's version
* Fix line width and Wasm build
* I think Wasm is fixed for real this time
* Drop client from sc-network and sc-client-db, move LongestChain to sc-client-api
* move leaves, cht, in_mem to sc-client-api, drop client from sc-finality-grandpa
* drop sc-service from sc-rpc
* drop sc-service from sc-consensus-aura
* drop sc-client from manual-seal and babe
* drop sc-client from utils/frame/rpc/system and utils/frame/benchmarking-cli
* drop sc-client from bin/node and bin/node-template
* drop sc-client
* fix tests
* remove check -p sc-client from gitlab.yml
* fix warnings
* fixes ui test
* fix light client tests
* adds associated Client type to AbstractService
* adds UsageProvider to Client
* fixed ui test, again
* tried and failed to get node-cli to compile for wasm
* thanks to tomaka for helping me get node-cli to compile for wasmm
* ui test pls pas 🙏🏾
* all tests passing 🪄
* no_run documentation code
* rm -f documentation code
* ClientProvider
* fix mega trait
* move LongestChain to sc-consensus, use adds minimal bounds to AbstractService::Client
* adds license to sc-consensus
Co-authored-by: Benjamin Kampmann <ben@parity.io>
* network: Only insert global addresses into the DHT.
Currently every address reported via libp2p-identify is inserted into
the DHT which thus contains a multitude of unreachable addresses such
as from 127.0.0.0/8 or 10.0.0.0/8.
Issue #5099 suggested a dedicated service over UDP to gauge the
reachability of an address, which would however incur extra I/O costs
and be of limited use.
As an alternative and simpler tactic, this PR only allows global IP
addresses to be inserted into the DHT unless an explicit command-line
flag `--allow-non-global-addresses-in-dht` is given or a node is
started with `--dev`. This opt-in behaviour is meant to allow
site-local networks to still make use of a DHT.
* Enable non-global in more test setups.
* Replace command-line option with different name.
* Another test fix.
This PR refactors the metrics measuring and Prometheus exposing entity in sc-service into its own submodule and extends the parameters it exposes by:
- system load average (over one, five and 15min)
- the TCP connection state of the process (lsof), refs #5304
- number of tokio threads
- number of known forks
- counter for items in each unbounded queue (with internal unbounded channels)
- number of file descriptors opened by this process (*nix only at this point)
- number of system threads (*nix only at this point)
refs #4679
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Ashley <ashley.ruglys@gmail.com>
* Version bump
* Split generate_changelog.sh into separate script
Can be run in the format `generate_changelog.sh $previous_version $version`.
* remove early exit from publish_draft_release.sh
* adding changelog
* ci: change last_github_release to also find pre-releases
Co-authored-by: Martin Pugh <pugh@s3kr.it>
This updates `parity-scale-codec` to `1.2.0`, which includes multiple
performance improvements and a fix that bounds the capacity of a vector
at decoding.
* setting first batch of descriptions
* fix what I just broke
* next batch
* and pallets, too
* last batch
* set cargo.lock
* keep'em dev-deps
* bump version to alpha.2
* adding unleash to ci
* fixing formatting
* with a dot please
* alpha.3 now
* do not publish testing helpers
* remove old test-helpers cruft
* fix cargo.lock
* with alpha 4
* do not publish runtime-interface-test either
* disable more test crates from publishing
* switch to alpha.5
* replace tempdir with tempfile
* update lru
* switch to bytes 0.5
* release script fixes
* switch on and to latest alpha
* BUT THE SPACES
* setting versions to development pre-release
fixing version in dependencies
* unset already released wasm-builder
* do not publish test crates
* adding licenses
* setting homepage metadata
* set repository url
* Open one substream for each notifications protocol
* Fix WASM build
* Apply suggestions from code review
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Address concerns
* Use unsigned-varint to read the varint
* Use unsigned-varint
* Forgot Cargo.lock
Co-authored-by: Toralf Wittner <tw@dtex.org>
libp2p-0.16 allows configuring yamux through libp2p-yamux, so the
direct dependency is no longer needed.
While at it we also update to the latest versions of yamux and
nohash-hasher, though the code changes do not depend on it.
* service: Don't depend on tokio-executor
Seems to be a leftover dependency that's not used anymore.
* offchain: Upgrade hyper to 0.13, which uses tokio 0.2
* offchain: Adapt HTTP tests to Tokio 0.2
* network: Don't transitively include tokio 0.2 in WASM
1) We don't specifically depend on Tokio codec impls
2) Conflating features in Cargo means that enabling Tokio runtime
in the native environment will also do so in WASM, where it's
obviously not implemented and causes a compilation error.
* grafana-data-source: Pull hyper/tokio only in native environment
* network: Use "one shot" protocol handler.
Add two new `NetworkBehaviour`s, one handling remote block requests
and another one to handle light client requests (both local and from
remote). The change is motivated by the desire to use multiple
substreams of a single connection for different protocols. To achieve
this, libp2p's `OneShotHandler` is used as a protocol handler in each
behaviour. It will open a fresh substream for the duration of the
request and close it afterwards. For block requests, we currently only
handle incoming requests from remote and tests are missing. For light
client handling we support incoming requests from remote and also
ported a substantial amount of functionality over from
`light_dispatch.rs` (including several tests). However the result lacks
in at least two aspects:
(1) We require external updates w.r.t. the best block per peer and
currently nothing updates this information.
(2) We carry a lot of peer-related state around.
Both aspects could be simplified by externalising peer selection and
just requiring a specific peer ID where the request should be sent to.
We still have to maintain some peer related state due to the way
libp2p's swarm and network behaviour work (e.g. we must make sure to
always issue `NetworkBehaviourAction::SendEvent`s to peers we are
connected to, otherwise the actions die a silent death.
Another change implemented here is the use of protocol buffers as the
encoding for network messages. Certain individual fields of messages
are still SCALE encoded. There has been some discussion about this
in another PR (https://github.com/paritytech/substrate/pull/3452), so
far without resolution.
* Uncomment `Behaviour::light_client_request`.
* Add license headers.
* Add command-line flag to enable yamux flow control.
We never enabled proper flow-control for yamux streams which may cause
stream buffers to exceed their configured limit when the stream
producer outpaces the stream consumer. By switching the window update
mode to on-read, producers will only receive more sending credit when
all data has been consumed from the stream buffer. Using this option
creates backpressure on producers. However depending on the protocol
there is a risk of deadlock, if both endpoints concurrently attempt to
send more data than they have credit for and neither side reads before
finishing their writes. To facilitate proper testing, this PR adds a
command-line flag `use-yamux-flow-control`.
* Replace comment with generic message.
* Make WASM browser thing compile
* Fix
* updated exit-future (github repo)
* Switch to broadcast crate
* Migrate client/cli
* Switch exit-future to modernize branch
* Small changes
* Switch to cargo version and fix fg tests
* fix basic-authorship
* Fix crash on grafana macro
* Fix grafana macro
* Switch node python version
* Disable record_metrics_slice in grafana macro on wasm
* Update client/grafana-data-source/src/lib.rs
* Revert "Update client/grafana-data-source/src/lib.rs"
This reverts commit 888009a8e0b7051bd4bfbbfdb0448bcf2e2aae93.
* Add wasm support for state machine
* Switch to my own libp2p version
* Revert "Switch to my own libp2p version"
This reverts commit ce613871b59264b3165b45c37943e6560240daa7.
* Revert "Add wasm support for state machine"
This reverts commit de7eaa0694d9534fc3b164621737968e9a6a7c5f.
* Add sc-browser
* Squash
* remove sc-browser
* Fix keystore on wasm
* stubs for removed functions to make env compatible with old runtimes
* Add test (that doesn't work)
* Fix build scripts
* Revert basic-authorship due to no panics
* Revert cli/informant
* Revert consensus
* revert offchain
* Update utils/browser/Cargo.toml
Co-Authored-By: Benjamin Kampmann <ben@gnunicorn.org>
* export console functions
* Add new chainspec
* Fix ws in chain spec
* revert chainspec
* Fix chainspec
* Use an Option<PathBuf> in keystore instead of cfg flags
* Remove crud
* Only use wasm-timer for instant and systemtime
* Remove telemetry changes
* Assuming this is ok
* Add a KeystoreConfig
* Add stubs back in
* Update libp2p
* Revert "Add stubs back in"
This reverts commit 4690cf1882aa0f99f7f00a58c4080c8aa9b77c36.
* Remove commented js again
* Bump kvdb-web version
* Fix cli
* Switch branch on futures-timer
* Fix tests
* Remove sc-client test build in check-web-wasm because there isn't a good way to build futures-timer with wasm-bindgen support in the build
* Remove more things ^^
* Switch branch on futures-timer back
* Put DB io stats behind a cfg flag
* Fix things
* Don't timeout transports on wasm
* Update branch of futures-timer and fix bad merge
* Spawn informant
* Fix network test
* Fix delay resets
* Changes
* Fix tests
* use wasm_timer for transaction pool
* Fixes
* Switch futures-timer to crates
* Only diagnose futures on native
* Fix sc-network-test tests
* Select log level in js
* Fix syncing ;^)
* Allow disabling colours in the informant
* Use OutputFormat enum for informant
* MallocSizeOf impl on transaction pool broke stuff because wasm_timer::Instant doesnt impl it so just revert the transaction pool to master
* Update futures-diagnose
* Revert "MallocSizeOf impl on transaction pool broke stuff because wasm_timer::Instant doesnt impl it so just revert the transaction pool to master"
This reverts commit baa4ffc94fd968b6660a2c17ba8113e06af15548.
* Pass whole chain spec in start_client
* Get Instant::now to work in transaction pool again
* Informant dep reordering
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: Svyatoslav Nikolsky <svyatonik@gmail.com>
Co-authored-by: Benjamin Kampmann <ben.kampmann@googlemail.com>
Co-authored-by: Demi Obenour <48690212+DemiMarie-parity@users.noreply.github.com>
* reset a couple of versions down from v0.2.0
* Unstablise browser-utils (very new) and grafana-data-source (going to be replaced with prometheus sometime)
* unmark a bunch more client crates for stabilization
* fix versions in Cargo.tomls
* Downgrade network-test
* Set frame-metadata version to `10.0.0`
* Hide and documented storage generator as internal api
* Downgrade `sp-externalities`
* Downgrade `sc-cli`
* Downgrade sc-executor et al to 0.8.0
* Downgrade sp-state-machine to 0.8.0
* Downgrade pallet-contracts et al to 0.8.0
* Downgrade sp-sandbox to 0.8.0
* downgrade pallet-evm to 0.8.0
* Downgrade pallet-staking to 0.8.0
2.0 should be implementation of lazy payout alongside all the fixes of
current module
* Downgrade node-transaction-factory to 0.8.0
* frame pallets are 2.0.0
Co-authored-by: Ashley <ashley.ruglys@gmail.com>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: Sergei Pepyakin <s.pepyakin@gmail.com>
Co-authored-by: Wei Tang <accounts@that.world>
Co-authored-by: thiolliere <gui.thiolliere@gmail.com>
Co-authored-by: Marcio Diaz <marcio@parity.io>
* Entirely update substrate-telemetry to futures 0.3
* Add a Closed error
* Update to libp2p 0.14
* More work
* More work
* More work
* More work
* Fix warnings
* Remove unwrap()
* Work on tests fixing
* Fix network tests
* Fix external network tests
* Update libp2p and restore Yamux in discovery test
* Ignore DNS if initializatio nfails
* Restore variables ordering
* Forgot browser-utils
* Fix downfall after merge
* Fix tests