[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.
Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.
I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`--out-peers 200`), networking CPU
usage goes down from ~110% to ~30% (80 pp) and for normal load
(`--out-peers 40`), the usage goes down from ~55% to ~18% (37 pp).
These should not be taken as final numbers because:
a) there are still some low-hanging optimization fruits, such as
enabling [receive window
auto-tuning](https://github.com/libp2p/rust-yamux/pull/176), integrating
`Peerset` more closely with `litep2p` or improving memory usage of the
WebSocket transport
b) fixing bugs/instabilities that incorrectly cause `litep2p` to do less
work will increase the networking CPU usage
c) verification in a more diverse set of tests/conditions is needed
Nevertheless, these numbers should give an early estimate for CPU usage
of the new networking backend.
This PR consists of three separate changes:
* introduce a generic `PeerId` (wrapper around `Multihash`) so that we
don't have use `NetworkService::PeerId` in every part of the code that
uses a `PeerId`
* introduce `NetworkBackend` trait, implement it for the libp2p network
stack and make Polkadot SDK generic over `NetworkBackend`
* implement `NetworkBackend` for litep2p
The new library should be considered experimental which is why
`rust-libp2p` will remain as the default option for the time being. This
PR currently depends on the master branch of `litep2p` but I'll cut a
new release for the library once all review comments have been
addresses.
---------
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexandru Vasile <alexandru.vasile@parity.io>
This outputs:
```
2024-04-02 14:36:02.135 ERROR tokio-runtime-worker beefy: 🥩 for session starting at block 21990151
no BEEFY authority key found in store, you must generate valid session keys
(https://wiki.polkadot.network/docs/maintain-guides-how-to-validate-polkadot#generating-the-session-keys)
```
error log entry, once every session, for nodes running with
`Role::Authority` that have no public BEEFY key in their keystore
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
**Update:** Pushed additional changes based on the review comments.
**This pull request fixes various spelling mistakes in this
repository.**
Most of the changes are contained in the first **3** commits:
- `Fix spelling mistakes in comments and docs`
- `Fix spelling mistakes in test names`
- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`
Other source code spelling mistakes are separated into individual
commits for easier reviewing:
- `Fix the spelling of 'authority'`
- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`
- `Fix the spelling of 'prev_enqueud_messages'`
- `Fix the spelling of 'endpoint'`
- `Fix the spelling of 'children'`
- `Fix the spelling of 'PenpalSiblingSovereignAccount'`
- `Fix the spelling of 'PenpalSudoAccount'`
- `Fix the spelling of 'insufficient'`
- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`
- `Fix the spelling of 'subtracted'`
- `Fix the spelling of 'CandidatePendingAvailability'`
- `Fix the spelling of 'exclusive'`
- `Fix the spelling of 'until'`
- `Fix the spelling of 'discriminator'`
- `Fix the spelling of 'nonexistent'`
- `Fix the spelling of 'subsystem'`
- `Fix the spelling of 'indices'`
- `Fix the spelling of 'committed'`
- `Fix the spelling of 'topology'`
- `Fix the spelling of 'response'`
- `Fix the spelling of 'beneficiary'`
- `Fix the spelling of 'formatted'`
- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`
- `Fix the spelling of 'succeeded'`
- `Fix the spelling of 'reopened'`
- `Fix the spelling of 'proposer'`
- `Fix the spelling of 'InstantiationNonce'`
- `Fix the spelling of 'depositor'`
- `Fix the spelling of 'expiration'`
- `Fix the spelling of 'phantom'`
- `Fix the spelling of 'AggregatedKeyValue'`
- `Fix the spelling of 'randomness'`
- `Fix the spelling of 'defendant'`
- `Fix the spelling of 'AquaticMammal'`
- `Fix the spelling of 'transactions'`
- `Fix the spelling of 'PassingTracingSubscriber'`
- `Fix the spelling of 'TxSignaturePayload'`
- `Fix the spelling of 'versioning'`
- `Fix the spelling of 'descendant'`
- `Fix the spelling of 'overridden'`
- `Fix the spelling of 'network'`
Let me know if this structure is adequate.
**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.
~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~
~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~
~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~
**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.
~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~
Closes#2160
First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)
Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.
Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)
Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
- Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
- Signed transactions (with a hardcoded signature).
- General transactions (without a hardcoded signature).
`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.
There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).
Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.
For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.
## Code Migration
### NOW: Getting it to build
Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:
```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
/* snip */
MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```
After:
```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
/* snip */
AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```
You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let extra: SignedExtra = (
/* snip */
MySpecialSignedExtension::new(/* snip */),
);
let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
extra,
)
}
```
After:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let tx_ext: TxExtension = (
/* snip */
MySpecialSignedExtension::new(/* snip */).into(),
);
let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
tx_ext,
)
}
```
### SOON: Migrating to `TransactionExtension`
Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.
- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.
#### `TransactionExtensionBase`
This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.
#### `TransactionExtension`
Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.
Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.
Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)
Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.
If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.
## TODO
- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
- [x] `ChargeTransactionPayment`
- [x] `DummyExtension`
- [x] `ChargeAssetTxPayment` (asset-tx-payment)
- [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
- [x] `CheckWeight`
- [x] `CheckTxVersion`
- [x] `CheckSpecVersion`
- [x] `CheckNonce`
- [x] `CheckNonZeroSender`
- [x] `CheckMortality`
- [x] `CheckGenesis`
- [x] `CheckOnlySudoAccount`
- [x] `WatchDummy`
- [x] `PrevalidateAttests`
- [x] `GenericSignedExtension`
- [x] `SignedExtension` (chain-polkadot-bulletin)
- [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
- [ ]
- [x] Fix any broken tests.
---------
Signed-off-by: georgepisaltu <george.pisaltu@parity.io>
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Signed-off-by: Alexandru Gheorghe <alexandru.gheorghe@parity.io>
Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>
Co-authored-by: Nikhil Gupta <17176722+gupnik@users.noreply.github.com>
Co-authored-by: georgepisaltu <52418509+georgepisaltu@users.noreply.github.com>
Co-authored-by: Chevdor <chevdor@users.noreply.github.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Maciej <maciej.zyszkiewicz@parity.io>
Co-authored-by: Javier Viola <javier@parity.io>
Co-authored-by: Marcin S. <marcin@realemail.net>
Co-authored-by: Tsvetomir Dimitrov <tsvetomir@parity.io>
Co-authored-by: Javier Bullrich <javier@bullrich.dev>
Co-authored-by: Koute <koute@users.noreply.github.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: Vladimir Istyufeev <vladimir@parity.io>
Co-authored-by: Ross Bulat <ross@parity.io>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Svyatoslav Nikolsky <svyatonik@gmail.com>
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: s0me0ne-unkn0wn <48632512+s0me0ne-unkn0wn@users.noreply.github.com>
Co-authored-by: ordian <write@reusable.software>
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexander Samusev <41779041+alvicsam@users.noreply.github.com>
Co-authored-by: Julian Eager <eagr@tutanota.com>
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: yjh <yjh465402634@gmail.com>
Co-authored-by: Tom Mi <tommi@niemi.lol>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <79228812+paradox-tt@users.noreply.github.com>
Co-authored-by: Bastian Köcher <info@kchr.de>
Co-authored-by: Joshy Orndorff <JoshOrndorff@users.noreply.github.com>
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
Co-authored-by: PG Herveou <pgherveou@gmail.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Juan Girini <juangirini@gmail.com>
Co-authored-by: bader y <ibnbassem@gmail.com>
Co-authored-by: James Wilson <james@jsdw.me>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
Co-authored-by: Parth <desaiparth08@gmail.com>
Co-authored-by: Andrew Jones <ascjones@gmail.com>
Co-authored-by: Jonathan Udd <jonathan@dwellir.com>
Co-authored-by: Serban Iorga <serban@parity.io>
Co-authored-by: Egor_P <egor@parity.io>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Evgeny Snitko <evgeny@parity.io>
Co-authored-by: Just van Stam <vstam1@users.noreply.github.com>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
Co-authored-by: dzmitry-lahoda <dzmitry@lahoda.pro>
Co-authored-by: zhiqiangxu <652732310@qq.com>
Co-authored-by: Nazar Mokrynskyi <nazar@mokrynskyi.com>
Co-authored-by: Anwesh <anweshknayak@gmail.com>
Co-authored-by: cheme <emericchevalier.pro@gmail.com>
Co-authored-by: Sam Johnson <sam@durosoft.com>
Co-authored-by: kianenigma <kian@parity.io>
Co-authored-by: Jegor Sidorenko <5252494+jsidorenko@users.noreply.github.com>
Co-authored-by: Muharem <ismailov.m.h@gmail.com>
Co-authored-by: joepetrowski <joe@parity.io>
Co-authored-by: Alexandru Gheorghe <49718502+alexggh@users.noreply.github.com>
Co-authored-by: Gabriel Facco de Arruda <arrudagates@gmail.com>
Co-authored-by: Squirrel <gilescope@gmail.com>
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com>
Co-authored-by: georgepisaltu <george.pisaltu@parity.io>
Co-authored-by: command-bot <>
Extract `WarpSync` (and `StateSync` as part of warp sync) from
`ChainSync` as independent syncing strategy called by `SyncingEngine`.
Introduce `SyncingStrategy` enum as a proxy between `SyncingEngine` and
specific syncing strategies.
## Limitations
Gap sync is kept in `ChainSync` for now because it shares the same set
of peers as block syncing implementation in `ChainSync`. Extraction of a
common context responsible for peer management in syncing strategies
able to run in parallel is planned for a follow-up PR.
## Further improvements
A possibility of conversion of `SyncingStartegy` into a trait should be
evaluated. The main stopper for this is that different strategies need
to communicate different actions to `SyncingEngine` and respond to
different events / provide different APIs (e.g., requesting
justifications is only possible via `ChainSync` and not through
`WarpSync`; `SendWarpProofRequest` action is only relevant to
`WarpSync`, etc.)
---------
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
This removes the need to unnecessarily provide a very specific data
structure `DatabaseSource` and removes huge `sc-client-db` dependency
from storage monitor. It is now possible to use storage monitor with any
path.
P.S. I still strongly dislike that it pulls `clap` dependency for such a
small feature, but many other crates do as well, so nothing special
here.
This commit introduces a new concept called `NotificationService` which
allows Polkadot protocols to communicate with the underlying
notification protocol implementation directly, without routing events
through `NetworkWorker`. This implies that each protocol has its own
service which it uses to communicate with remote peers and that each
`NotificationService` is unique with respect to the underlying
notification protocol, meaning `NotificationService` for the transaction
protocol can only be used to send and receive transaction-related
notifications.
The `NotificationService` concept introduces two additional benefits:
* allow protocols to start using custom handshakes
* allow protocols to accept/reject inbound peers
Previously the validation of inbound connections was solely the
responsibility of `ProtocolController`. This caused issues with light
peers and `SyncingEngine` as `ProtocolController` would accept more
peers than `SyncingEngine` could accept which caused peers to have
differing views of their own states. `SyncingEngine` would reject excess
peers but these rejections were not properly communicated to those peers
causing them to assume that they were accepted.
With `NotificationService`, the local handshake is not sent to remote
peer if peer is rejected which allows it to detect that it was rejected.
This commit also deprecates the use of `NetworkEventStream` for all
notification-related events and going forward only DHT events are
provided through `NetworkEventStream`. If protocols wish to follow each
other's events, they must introduce additional abtractions, as is done
for GRANDPA and transactions protocols by following the syncing protocol
through `SyncEventStream`.
Fixes https://github.com/paritytech/polkadot-sdk/issues/512
Fixes https://github.com/paritytech/polkadot-sdk/issues/514
Fixes https://github.com/paritytech/polkadot-sdk/issues/515
Fixes https://github.com/paritytech/polkadot-sdk/issues/554
Fixes https://github.com/paritytech/polkadot-sdk/issues/556
---
These changes are transferred from
https://github.com/paritytech/substrate/pull/14197 but there are no
functional changes compared to that PR
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Fixes https://github.com/paritytech/polkadot-sdk/issues/1725
This PR adds the following changes:
1. An attribute `pallet::feeless_if` that can be optionally attached to
a call like so:
```rust
#[pallet::feeless_if(|_origin: &OriginFor<T>, something: &u32| -> bool {
*something == 0
})]
pub fn do_something(origin: OriginFor<T>, something: u32) -> DispatchResult {
....
}
```
The closure passed accepts references to arguments as specified in the
call fn. It returns a boolean that denotes the conditions required for
this call to be "feeless".
2. A signed extension `SkipCheckIfFeeless<T: SignedExtension>` that
wraps a transaction payment processor such as
`pallet_transaction_payment::ChargeTransactionPayment`. It checks for
all calls annotated with `pallet::feeless_if` to see if the conditions
are met. If so, the wrapped signed extension is not called, essentially
making the call feeless.
In order to use this, you can simply replace your existing signed
extension that manages transaction payment like so:
```diff
- pallet_transaction_payment::ChargeTransactionPayment<Runtime>,
+ pallet_skip_feeless_payment::SkipCheckIfFeeless<
+ Runtime,
+ pallet_transaction_payment::ChargeTransactionPayment<Runtime>,
+ >,
```
### Todo
- [x] Tests
- [x] Docs
- [x] Prdoc
---------
Co-authored-by: Nikhil Gupta <>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
The check_hardware functions does not give us too much information as to
what is failing, so let's return the list of failed metrics, so that callers can print
it.
This would make debugging easier, rather than try to guess which
dimension is actually failing.
Signed-off-by: Alexandru Gheorghe <alexandru.gheorghe@parity.io>
See #1345, <https://github.com/paritytech/substrate/pull/14207>.
This adds all the necessary mixnet components, and puts them together in
the "kitchen-sink" node/runtime. The components added are:
- A pallet (`frame/mixnet`). This is responsible for determining the
current mixnet session and phase, and the mixnodes to use in each
session. It provides a function that validators can call to register a
mixnode for the next session. The logic of this pallet is very similar
to that of the `im-online` pallet.
- A service (`client/mixnet`). This implements the core mixnet logic,
building on the `mixnet` crate. The service communicates with other
nodes using notifications sent over the "mixnet" protocol.
- An RPC interface. This currently only supports sending transactions
over the mixnet.
---------
Co-authored-by: David Emett <dave@sp4m.net>
Co-authored-by: Javier Viola <javier@parity.io>
Submit the outstanding PRs from the old repos(these were already
reviewed and approved before the repo rorg, but not yet submitted):
Main PR: https://github.com/paritytech/substrate/pull/14014
Companion PRs: https://github.com/paritytech/polkadot/pull/7134,
https://github.com/paritytech/cumulus/pull/2489
The changes in the PR:
1. ChainSync currently calls into the block request handler directly.
Instead, move the block request handler behind a trait. This allows new
protocols to be plugged into ChainSync.
2. BuildNetworkParams is changed so that custom relay protocol
implementations can be (optionally) passed in during network creation
time. If custom protocol is not specified, it defaults to the existing
block handler
3. BlockServer and BlockDownloader traits are introduced for the
protocol implementation. The existing block handler has been changed to
implement these traits
4. Other changes:
[X] Make TxHash serializable. This is needed for exchanging the
serialized hash in the relay protocol messages
[X] Clean up types no longer used(OpaqueBlockRequest,
OpaqueBlockResponse)
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: command-bot <>
* grandpa: avoid importing unnecessary justifications
* grandpa: make justification_import_period configurable
* grandpa: keep the first justification
* grandpa: add test for justification import period
* grandpa: fix test
* Start
* More work!
* Moar
* More changes
* More fixes
* More worrk
* More fixes
* More fixes to make it compile
* Adds `NoOffchainStorage`
* Pass the extensions
* Small basti making small progress
* Fix merge errors and remove `ExecutionContext`
* Move registration of `ReadRuntimeVersionExt` to `ExecutionExtension`
Instead of registering `ReadRuntimeVersionExt` in `sp-state-machine` it is moved to
`ExecutionExtension` which provides the default extensions.
* Fix compilation
* Register the global extensions inside runtime api instance
* Fixes
* Fix `generate_initial_session_keys` by passing the keystore extension
* Fix the grandpa tests
* Fix more tests
* Fix more tests
* Don't set any heap pages if there isn't an override
* Fix small fallout
* FMT
* Fix tests
* More tests
* Offchain worker custom extensions
* More fixes
* Make offchain tx pool creation reusable
Introduces an `OffchainTransactionPoolFactory` for creating offchain transactions pools that can be
registered in the runtime externalities context. This factory will be required for a later pr to
make the creation of offchain transaction pools easier.
* Fixes
* Fixes
* Set offchain transaction pool in BABE before using it in the runtime
* Add the `offchain_tx_pool` to Grandpa as well
* Fix the nodes
* Print some error when using the old warnings
* Fix merge issues
* Fix compilation
* Rename `babe_link`
* Rename to `offchain_tx_pool_factory`
* Cleanup
* FMT
* Fix benchmark name
* Fix `try-runtime`
* Remove `--execution` CLI args
* Make clippy happy
* Forward bls functions
* Fix docs
* Update UI tests
* Update client/api/src/execution_extensions.rs
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Koute <koute@users.noreply.github.com>
* Update client/cli/src/params/import_params.rs
Co-authored-by: Koute <koute@users.noreply.github.com>
* Update client/api/src/execution_extensions.rs
Co-authored-by: Koute <koute@users.noreply.github.com>
* Pass the offchain storage to the MMR RPC
* Update client/api/src/execution_extensions.rs
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
* Review comments
* Fixes
---------
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
Co-authored-by: Koute <koute@users.noreply.github.com>
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
* Prepare `sc-network` for `ProtocolController`/`NotificationService`
The upcoming notification protocol refactoring requires that protocols
are able to communicate with `sc-network` over unique and direct links.
This means that `sc-network` side of the link has to be created before
`sc-network` is initialized and that it is allowed to consume the object
as the receiver half of the link may not implement `Clone`.
Remove request-response and notification protocols from `NetworkConfiguration`
and create a new object that contains the configurations of these protocols
and which is consumable by `sc-network`. This is needed needed because, e.g.,
the receiver half of `NotificationService` is not clonable so `sc-network`
must consume it when it's initializing the protocols in `Notifications`.
Similar principe applies to `PeerStore`/`ProtocolController`: as per current
design, protocols are created before the network so `Protocol` cannot be
the one creating the `PeerStore` object. `FullNetworkConfiguration` will be
used to store the objects that `sc-network` will use to communicate with
protocols and it will also allow protocols to allocate handles so they
can directly communicate with `sc-network`.
* Fixes
* Update client/service/src/builder.rs
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Updates
* Doc updates + cargo-fmt
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Introduce keystore specialized sign methods
* Get rid of 'AppKey::UntypedGeneric' associated type.
Untyped generics are accessible using associated types 'Generic' associated type.
I.e. <T as AppKey>::Public::Generic
* Get rid of 'CryptoTypePublicPair'
* Trivial fix
* Small refactory of local keystore implementations
* Remove 'crypto_id' method from 'Public'
* Trivial rename of 'AppKey' to 'AppCrypto'
* Remove unused import
* Improve docs
* Better signature related errors for authority-discovery
* Apply review suggestion
* Apply review suggestions
Co-authored-by: Koute <koute@users.noreply.github.com>
* Authority discoverty signing error revisited
* Signing error revisited for babe and aura as well
* Further cleanup
---------
Co-authored-by: Koute <koute@users.noreply.github.com>
* Move service tests to `client/network/tests`
These tests depend on `sc-network` and `sc-network-sync` so they should
live outside the crate.
* Move some configs from `sc-network-common` to `sc-network`
* Move `NetworkService` traits to `sc-network`
* Move request-responses to `sc-network`
* Remove more stuff
* Remove rest of configs from `sc-network-common` to `sc-network`
* Remove more stuff
* Fix warnings
* Update client/network/src/request_responses.rs
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Fix cargo doc
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Move import queue out of `sc-network`
Add supplementary asynchronous API for the import queue which means
it can be run as an independent task and communicated with through
the `ImportQueueService`.
This commit removes removes block and justification imports from
`sc-network` and provides `ChainSync` with a handle to import queue so
it can import blocks and justifications. Polling of the import queue is
moved complete out of `sc-network` and `sc_consensus::Link` is
implemented for `ChainSyncInterfaceHandled` so the import queue
can still influence the syncing process.
* Move stuff to SyncingEngine
* Move `ChainSync` instanation to `SyncingEngine`
Some of the tests have to be rewritten
* Move peer hashmap to `SyncingEngine`
* Let `SyncingEngine` to implement `ChainSyncInterface`
* Introduce `SyncStatusProvider`
* Move `sync_peer_(connected|disconnected)` to `SyncingEngine`
* Implement `SyncEventStream`
Remove `SyncConnected`/`SyncDisconnected` events from
`NetworkEvenStream` and provide those events through
`ChainSyncInterface` instead.
Modify BEEFY/GRANDPA/transactions protocol and `NetworkGossip` to take
`SyncEventStream` object which they listen to for incoming sync peer
events.
* Introduce `ChainSyncInterface`
This interface provides a set of miscellaneous functions that other
subsystems can use to query, for example, the syncing status.
* Move event stream polling to `SyncingEngine`
Subscribe to `NetworkStreamEvent` and poll the incoming notifications
and substream events from `SyncingEngine`.
The code needs refactoring.
* Make `SyncingEngine` into an asynchronous runner
This commits removes the last hard dependency of syncing from
`sc-network` meaning the protocol now lives completely outside of
`sc-network`, ignoring the hardcoded peerset entry which will be
addressed in the future.
Code needs a lot of refactoring.
* Fix warnings
* Code refactoring
* Use `SyncingService` for BEEFY
* Use `SyncingService` for GRANDPA
* Remove call delegation from `NetworkService`
* Remove `ChainSyncService`
* Remove `ChainSync` service tests
They were written for the sole purpose of verifying that `NetworWorker`
continues to function while the calls are being dispatched to
`ChainSync`.
* Refactor code
* Refactor code
* Update client/finality-grandpa/src/communication/tests.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Fix warnings
* Apply review comments
* Fix docs
* Fix test
* cargo-fmt
* Update client/network/sync/src/engine.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Update client/network/sync/src/engine.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Add missing docs
* Refactor code
---------
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Change copyright year to 2023 from 2022
* Fix incorrect update of copyright year
* Remove years from copy right header
* Fix remaining files
* Fix typo in a header and remove update-copyright.sh
* BlockId removal: refactor of runtime API
It changes the arguments of:
- `ApiExt` methods: `has_api`, `has_api_with`, `api_version`
- `CallApiAt` method: `runtime_version_at`
from: `BlockId<Block>` to: `Block::Hash`
It also changes the first argument of all generated runtime API calls from: `BlockId<Block>` to: `Block::Hash`
This PR is part of BlockId::Number refactoring analysis (paritytech/substrate#11292)
* BlockId removal: refactor of runtime API - tests
- tests adjusted to new runtime API,
- some tests migrated from block number to block hash
* benchmarking-cli: BlockId(0) migrated to info().genesis_hash
`runtime_api.call()` now requires the block hash instead of BlockId::Number.
To access the genesis hash widely used in benchmarking engine the Client
was constrained to satisfy `sp_blockchain::HeaderBackend<Block>` trait
which provides `info().genesis_hash`.
* trivial: api.call(BlockId) -> api.call(Hash)
- Migrated all `runtime_api.calls` to use Hash
- Noteworthy (?):
-- `validate_transaction_blocking` in transaction pool,
* CallApiAtParams::at changed to Block::Hash
* missed doc updated
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* ".git/.scripts/commands/fmt/fmt.sh"
* BlockId removal: Benchmark::consumed_weight
Little refactor around `Benchmark::consumed_weight`: `BlockId` removed.
* at_hash renamed
* wrong merge fixed
* beefy worker: merged with master
* beefy: tests: missing block problem fixed
* Apply review suggestion
* fix
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: command-bot <>
* BlockId removal: Client::runtime_version_at
It changes the arguments of `Client::runtime_version_at` from: `BlockId<Block>` to: `Block::Hash`
* Apply suggestions from code review
Co-authored-by: Anton <anton.kalyaev@gmail.com>
---------
Co-authored-by: Anton <anton.kalyaev@gmail.com>
Co-authored-by: parity-processbot <>
* Move create_inherent_data call to use side
* Make provide_inherent_data async
* Fix tests
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* Log errors
* Fix test
* Fix test
* fix
* Deduplicate test code
* fix
* flag
* Update client/consensus/slots/src/lib.rs
Co-authored-by: Bastian Köcher <git@kchr.de>
* Revert "Deduplicate test code"
This reverts commit ba46adbe089329c78cd69ccdb08e27ed67bd77cf.
* Fix test
* remove commented out code
* minor to start CI run
* start CI
* Update client/consensus/slots/src/lib.rs
Co-authored-by: Marcin S. <marcin@bytedude.com>
* Apply PR suggestions
* Apply PR suggestions
* Update client/consensus/slots/src/lib.rs
Co-authored-by: Bastian Köcher <git@kchr.de>
* minor
* kickoff CI
* PR suggestions
* Compute remaining duration instead of using slot_info.duration
* Don't rely on sub implementation for Instant
* Apply PR suggestions
* Use saturating_duration_since
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Marcin S. <marcin@bytedude.com>
Co-authored-by: parity-processbot <>
* Remove timestamp from SlotInfo
* Expose as millis instead of secs
* Nits
* Fix test after field removal
* Yet another test fix
* On the fly timestamp computation
* Removed slot timestamp from logs
* Removed reference to timestamp from slots subsystem
* Slot based algorithm tests do not require timstamp inherent anymore
* Remove junk files
* Further tests cleanup
* Trigger pipeline
* Apply code suggestions
* Trigger pipeline
Co-authored-by: André Silva <andrerfosilva@gmail.com>
* Remove CanAuthorWith trait
CanAuthotWith trait removed. Also all dependencies, parameters, type
paramers were removed. This is related to removal of native runtime.
* Remove commented code
* Fix code formatting
* trigger CI job
* trigger CI job
* trigger CI job
* trigger CI job
* trigger CI job
* trigger CI job
* trigger CI job
* Fetch babe config data from runtime state
* Some renaming
* More renaming
* Final nits
* Fix tests and benches
* Rename to in BabeConfiguration
* Remove duplicate babe parameter description
Already specified over the 'PRIMARY_PROBABILITY' constant value
* trigger pipeline
* trigger pipeline
Aaro Altonen