Introduces `CryptoBytes` type defined as:
```rust
pub struct CryptoBytes<const N: usize, Tag = ()>(pub [u8; N], PhantomData<fn() -> Tag>);
```
The type implements a bunch of methods and traits which are typically
expected from a byte array newtype
(NOTE: some of the methods and trait implementations IMO are a bit
redundant, but I decided to maintain them all to not change too much
stuff in this PR)
It also introduces two (generic) typical consumers of `CryptoBytes`:
`PublicBytes` and `SignatureBytes`.
```rust
pub struct PublicTag;
pub PublicBytes<const N: usize, CryptoTag> = CryptoBytes<N, (PublicTag, CryptoTag)>;
pub struct SignatureTag;
pub SignatureBytes<const N: usize, CryptoTag> = CryptoBytes<N, (SignatureTag, CryptoTag)>;
```
Both of them use a tag to differentiate the two types at a higher level.
Downstream specializations will further specialize using a dedicated
crypto tag. For example in ECDSA:
```rust
pub struct EcdsaTag;
pub type Public = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>;
pub type Signature = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>;
```
Overall we have a cleaner and most importantly **consistent** code for
all the types involved
All these details are opaque to the end user which can use `Public` and
`Signature` for the cryptos as before
I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
## Problem
The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.
It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.
**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
/// from pallet_nis
#[pallet::composite_enum]
pub enum HoldReason {
NftReceipt,
}
/// from pallet_preimage
#[pallet::composite_enum]
pub enum HoldReason {
Preimage,
}
// from pallet_state-trie-migration
#[pallet::composite_enum]
pub enum HoldReason {
SlashForContinueMigrate,
SlashForMigrateCustomTop,
SlashForMigrateCustomChild,
}
```
- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {
#[codec(index = 32u8)]
Preimage(pallet_preimage::HoldReason),
#[codec(index = 38u8)]
Nis(pallet_nis::HoldReason),
#[codec(index = 42u8)]
StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```
- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)
However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
```
// pseudo-code - if we try to call all of these:
T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;
// With `type MaxHolds = ConstU32<3>` these two will fail
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
```
## Solutions
A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.
The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {
#[pallet::composite_enum]
pub enum HoldReason {
ModuleSingleInstanceReason1,
ModuleSingleInstanceReason2,
}
...
}
#[frame_support::pallet(dev_mode)]
mod module_multi_instance {
#[pallet::composite_enum]
pub enum HoldReason<I: 'static = ()> {
ModuleMultiInstanceReason1,
ModuleMultiInstanceReason2,
ModuleMultiInstanceReason3,
}
...
}
impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
for RuntimeHoldReason
{
const VARIANT_COUNT: u32 = 0
+ module_single_instance::HoldReason::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```
In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.
## For reviewers
Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs`
- `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
- `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`
And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`
## Next steps
Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.
---------
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
This PR makes the block number provider configurable through the Config
trait in pallet-vesting, this gives parachains the option to use the
relay chain block number provider from ParachainSystem.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
closes https://github.com/paritytech/polkadot-sdk/issues/1882
## Breaking Changes
This PR introduces a new item to `pallet_balances::Config`:
```diff
trait Config {
++ type RuntimeFreezeReasons;
}
```
This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.
In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Happy New Year!
* Remove year entierly
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Remove years from copyright notice in the entire repo
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Some renames
* Fix
* Fix build for new APIs
* Remove diener
* Fixes
* Fixes
* Fix integration tests
* Fixes
* fix nis issuance
* Update Cargo.toml
* Polkadot doesn't have freezes/holds yet
* No networks use freezes/holds
* update lockfile for {"substrate"}
* Fix tests
There are more failing tests; just starting with the easy ones.
Reserved balance does not count towards ED anymore, therefore reducing
all the reserves by ED (1).
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fixes for Polkadot pallets
* Fix parachains benchmarks
* Update Substrate
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: parity-processbot <>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Remove use of Store trait from runtime directory
* Remove Store trait usage from xcm directory
* Run cargo fmt
* update lockfile for {"substrate"}
---------
Co-authored-by: parity-processbot <>
* Manage new `sr25519::Signature::from_slice` fallible constructor
Constructor now returns an `Option`
* update lockfile for {"substrate"}
Co-authored-by: parity-processbot <>
* Add `without_storage_info`
The MaxEncodedLen trait is now enforced by default in Substrate.
All pallets missing an implementation need to be marked with
`without_storage_info` now.
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Remove `generate_storage_info`
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add more `without_storage_info`
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* update lockfile for {"substrate"}
Co-authored-by: parity-processbot <>
* CI: add spellcheck
* revert me
* CI: explicit command for spellchecker
* spellcheck: edit misspells
* CI: run spellcheck on diff
* spellcheck: edits
* spellcheck: edit misspells
* spellcheck: add rules
* spellcheck: mv configs
* spellcheck: more edits
* spellcheck: chore
* spellcheck: one more thing
* spellcheck: and another one
* spellcheck: seems like it doesn't get to an end
* spellcheck: new words after rebase
* spellcheck: new words appearing out of nowhere
* chore
* review edits
* more review edits
* more edits
* wonky behavior
* wonky behavior 2
* wonky behavior 3
* change git behavior
* spellcheck: another bunch of new edits
* spellcheck: new words are koming out of nowhere
* CI: finding the master
* CI: fetching master implicitly
* CI: undebug
* new errors
* a bunch of new edits
* and some more
* Update node/core/approval-voting/src/approval_db/v1/mod.rs
Co-authored-by: Andronik Ordian <write@reusable.software>
* Update xcm/xcm-executor/src/assets.rs
Co-authored-by: Andronik Ordian <write@reusable.software>
* Apply suggestions from code review
Co-authored-by: Andronik Ordian <write@reusable.software>
* Suggestions from the code review
* CI: scan only changed files
Co-authored-by: Andronik Ordian <write@reusable.software>
Davide Galassi