Currently the xcm-executor returns an `Unimplemented` error if it
receives any HRMP-related instruction.
What I propose here, which is what we are currently doing in our forked
executor at polimec, is to introduce a trait implemented by the executor
which will handle those instructions.
This way, if parachains want to keep the default behavior, they just use
`()` and it will return unimplemented, but they can also implement their
own logic to establish HRMP channels with other chains in an automated
fashion, without requiring to go through governance.
Our implementation is mentioned in the [polkadot HRMP
docs](https://arc.net/l/quote/hduiivbu), and it was suggested to us to
submit a PR to add these changes to polkadot-sdk.
---------
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: command-bot <>
Closes#2160
First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)
Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.
Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)
Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
- Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
- Signed transactions (with a hardcoded signature).
- General transactions (without a hardcoded signature).
`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.
There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).
Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.
For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.
## Code Migration
### NOW: Getting it to build
Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:
```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
/* snip */
MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```
After:
```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
/* snip */
AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```
You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let extra: SignedExtra = (
/* snip */
MySpecialSignedExtension::new(/* snip */),
);
let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
extra,
)
}
```
After:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let tx_ext: TxExtension = (
/* snip */
MySpecialSignedExtension::new(/* snip */).into(),
);
let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
tx_ext,
)
}
```
### SOON: Migrating to `TransactionExtension`
Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.
- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.
#### `TransactionExtensionBase`
This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.
#### `TransactionExtension`
Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.
Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.
Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)
Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.
If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.
## TODO
- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
- [x] `ChargeTransactionPayment`
- [x] `DummyExtension`
- [x] `ChargeAssetTxPayment` (asset-tx-payment)
- [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
- [x] `CheckWeight`
- [x] `CheckTxVersion`
- [x] `CheckSpecVersion`
- [x] `CheckNonce`
- [x] `CheckNonZeroSender`
- [x] `CheckMortality`
- [x] `CheckGenesis`
- [x] `CheckOnlySudoAccount`
- [x] `WatchDummy`
- [x] `PrevalidateAttests`
- [x] `GenericSignedExtension`
- [x] `SignedExtension` (chain-polkadot-bulletin)
- [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
- [ ]
- [x] Fix any broken tests.
---------
Signed-off-by: georgepisaltu <george.pisaltu@parity.io>
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Signed-off-by: Alexandru Gheorghe <alexandru.gheorghe@parity.io>
Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>
Co-authored-by: Nikhil Gupta <17176722+gupnik@users.noreply.github.com>
Co-authored-by: georgepisaltu <52418509+georgepisaltu@users.noreply.github.com>
Co-authored-by: Chevdor <chevdor@users.noreply.github.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Maciej <maciej.zyszkiewicz@parity.io>
Co-authored-by: Javier Viola <javier@parity.io>
Co-authored-by: Marcin S. <marcin@realemail.net>
Co-authored-by: Tsvetomir Dimitrov <tsvetomir@parity.io>
Co-authored-by: Javier Bullrich <javier@bullrich.dev>
Co-authored-by: Koute <koute@users.noreply.github.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: Vladimir Istyufeev <vladimir@parity.io>
Co-authored-by: Ross Bulat <ross@parity.io>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Svyatoslav Nikolsky <svyatonik@gmail.com>
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: s0me0ne-unkn0wn <48632512+s0me0ne-unkn0wn@users.noreply.github.com>
Co-authored-by: ordian <write@reusable.software>
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexander Samusev <41779041+alvicsam@users.noreply.github.com>
Co-authored-by: Julian Eager <eagr@tutanota.com>
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: yjh <yjh465402634@gmail.com>
Co-authored-by: Tom Mi <tommi@niemi.lol>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <79228812+paradox-tt@users.noreply.github.com>
Co-authored-by: Bastian Köcher <info@kchr.de>
Co-authored-by: Joshy Orndorff <JoshOrndorff@users.noreply.github.com>
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
Co-authored-by: PG Herveou <pgherveou@gmail.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Juan Girini <juangirini@gmail.com>
Co-authored-by: bader y <ibnbassem@gmail.com>
Co-authored-by: James Wilson <james@jsdw.me>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
Co-authored-by: Parth <desaiparth08@gmail.com>
Co-authored-by: Andrew Jones <ascjones@gmail.com>
Co-authored-by: Jonathan Udd <jonathan@dwellir.com>
Co-authored-by: Serban Iorga <serban@parity.io>
Co-authored-by: Egor_P <egor@parity.io>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Evgeny Snitko <evgeny@parity.io>
Co-authored-by: Just van Stam <vstam1@users.noreply.github.com>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
Co-authored-by: dzmitry-lahoda <dzmitry@lahoda.pro>
Co-authored-by: zhiqiangxu <652732310@qq.com>
Co-authored-by: Nazar Mokrynskyi <nazar@mokrynskyi.com>
Co-authored-by: Anwesh <anweshknayak@gmail.com>
Co-authored-by: cheme <emericchevalier.pro@gmail.com>
Co-authored-by: Sam Johnson <sam@durosoft.com>
Co-authored-by: kianenigma <kian@parity.io>
Co-authored-by: Jegor Sidorenko <5252494+jsidorenko@users.noreply.github.com>
Co-authored-by: Muharem <ismailov.m.h@gmail.com>
Co-authored-by: joepetrowski <joe@parity.io>
Co-authored-by: Alexandru Gheorghe <49718502+alexggh@users.noreply.github.com>
Co-authored-by: Gabriel Facco de Arruda <arrudagates@gmail.com>
Co-authored-by: Squirrel <gilescope@gmail.com>
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com>
Co-authored-by: georgepisaltu <george.pisaltu@parity.io>
Co-authored-by: command-bot <>
I found out during the cleanup of this deprecation message in the
`polkadot-fellows` repository that we deprecated `CurrencyAdapter`
without making the recommended changes.
## TODO
- [ ] fix `polkadot-fellows` bump to 1.6.0
https://github.com/polkadot-fellows/runtimes/pull/159
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace
Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.
I am using a tool to do this, so its mostly a test to see that it works
as expected.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
## Problem
The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.
It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.
**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
/// from pallet_nis
#[pallet::composite_enum]
pub enum HoldReason {
NftReceipt,
}
/// from pallet_preimage
#[pallet::composite_enum]
pub enum HoldReason {
Preimage,
}
// from pallet_state-trie-migration
#[pallet::composite_enum]
pub enum HoldReason {
SlashForContinueMigrate,
SlashForMigrateCustomTop,
SlashForMigrateCustomChild,
}
```
- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {
#[codec(index = 32u8)]
Preimage(pallet_preimage::HoldReason),
#[codec(index = 38u8)]
Nis(pallet_nis::HoldReason),
#[codec(index = 42u8)]
StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```
- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)
However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
```
// pseudo-code - if we try to call all of these:
T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;
// With `type MaxHolds = ConstU32<3>` these two will fail
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
```
## Solutions
A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.
The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {
#[pallet::composite_enum]
pub enum HoldReason {
ModuleSingleInstanceReason1,
ModuleSingleInstanceReason2,
}
...
}
#[frame_support::pallet(dev_mode)]
mod module_multi_instance {
#[pallet::composite_enum]
pub enum HoldReason<I: 'static = ()> {
ModuleMultiInstanceReason1,
ModuleMultiInstanceReason2,
ModuleMultiInstanceReason3,
}
...
}
impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
for RuntimeHoldReason
{
const VARIANT_COUNT: u32 = 0
+ module_single_instance::HoldReason::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```
In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.
## For reviewers
Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs`
- `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
- `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`
And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`
## Next steps
Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.
---------
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
# Note for reviewer
Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.
# Description
Added XCMv4.
## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation
In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.
## Removed `Abstract` asset id
It was not being used anywhere and this simplifies the code.
Now assets are just constructed as follows:
```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```
No need for specifying `Concrete` anymore.
## Outcome is now a named fields struct
Instead of
```rust
pub enum Outcome {
Complete(Weight),
Incomplete(Weight, Error),
Error(Error),
}
```
we now have
```rust
pub enum Outcome {
Complete { used: Weight },
Incomplete { used: Weight, error: Error },
Error { error: Error },
}
```
## Added Reanchorable trait
Now both locations and assets implement this trait, making it easier to
reanchor both.
## New syntax for building locations and junctions
Now junctions are built using the following methods:
```rust
let location = Location {
parents: 1,
interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```
or
```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```
And they are matched like so:
```rust
match location.unpack() {
(1, [Parachain(id)]) => ...
(0, Here) => ...,
(1, [_]) => ...,
}
```
This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.
This was needed to make all sizes smaller.
# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id
---------
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
Many clippy lints usually enforced by `-Dcomplexity` and `-Dcorrectness`
are not caught by CI as they are gated by `features`, like
`runtime-benchmarks`, while the clippy CI job runs with only the default
features for all targets.
This PR also adds a CI step to run clippy with `--all-features` to
ensure the code quality is maintained behind feature gates from now on.
To improve local development, clippy lints are downgraded to warnings,
but they still will result in an error at CI due to the `-Dwarnings`
rustflag.
---------
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
In the move from the old `Currency` traits to the new `fungible/s`
family of traits, we already had the `FungiblesAdapter` and
`NonFungiblesAdapter` for multiple fungible and non fungible assets
respectively. However, for handling only one fungible asset, we were
missing a `FungibleAdapter`, and so used the old `CurrencyAdapter`
instead. This PR aims to fill in that gap, and provide the new adapter
for more updated examples.
I marked the old `CurrencyAdapter` as deprecated as part of this PR, and
I'll change it to the new `FungibleAdapter` in a following PR.
The two stages are separated so as to not bloat this PR with some name
fixes in tests.
---------
Co-authored-by: command-bot <>
We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Adding on top of the new builder pattern for creating XCM programs, I'm
adding some more APIs:
```rust
let paying_fees: Xcm<()> = Xcm::builder() // Only allow paying for fees
.withdraw_asset() // First instruction has to load the holding register
.buy_execution() // Second instruction has to be `buy_execution`
.build();
let paying_fees_invalid: Xcm<()> = Xcm::builder()
.withdraw_asset()
.build(); // Invalid, need to pay for fees
let not_paying_fees: Xcm<()> = Xcm::builder_unpaid()
.unpaid_execution() // Needed
.withdraw_asset()
.deposit_asset()
.build();
let all_goes: Xcm<()> = Xcm::builder_unsafe() // You can do anything
.withdraw_asset()
.deposit_asset()
.build();
```
The invalid bits are because the methods don't even exist on the types
that you'd want to call them on.
---------
Co-authored-by: command-bot <>
## Motivation
`pallet-xcm` is the main user-facing interface for XCM functionality,
including assets manipulation functions like `teleportAssets()` and
`reserve_transfer_assets()` calls.
While `teleportAsset()` works both ways, `reserve_transfer_assets()`
works only for sending reserve-based assets to a remote destination and
beneficiary when the reserve is the _local chain_.
## Solution
This PR enhances `pallet_xcm::(limited_)reserve_withdraw_assets` to
support transfers when reserves are other chains.
This will allow complete, **bi-directional** reserve-based asset
transfers user stories using `pallet-xcm`.
Enables following scenarios:
- transferring assets with local reserve (was previously supported iff
asset used as fee also had local reserve - now it works in all cases),
- transferring assets with reserve on destination,
- transferring assets with reserve on remote/third-party chain (iff
assets and fees have same remote reserve),
- transferring assets with reserve different than the reserve of the
asset to be used as fees - meaning can be used to transfer random asset
with local/dest reserve while using DOT for fees on all involved chains,
even if DOT local/dest reserve doesn't match asset reserve,
- transferring assets with any type of local/dest reserve while using
fees which can be teleported between involved chains.
All of the above is done by pallet inner logic without the user having
to specify which scenario/reserves/teleports/etc. The correct scenario
and corresponding XCM programs are identified, and respectively, built
automatically based on runtime configuration of trusted teleporters and
trusted reserves.
#### Current limitations:
- while `fees` and "non-fee" `assets` CAN have different reserves (or
fees CAN be teleported), the remaining "non-fee" `assets` CANNOT, among
themselves, have different reserve locations (this is also implicitly
enforced by `MAX_ASSETS_FOR_TRANSFER=2`, but this can be safely
increased in the future).
- `fees` and "non-fee" `assets` CANNOT have **different remote**
reserves (this could also be supported in the future, but adds even more
complexity while possibly not being worth it - we'll see what the future
holds).
Fixes https://github.com/paritytech/polkadot-sdk/issues/1584
Fixes https://github.com/paritytech/polkadot-sdk/issues/2055
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Added a proc macro to be able to write XCMs using the builder pattern.
This means we go from having to do this:
```rust
let message: Xcm<()> = Xcm(vec![
WithdrawAsset(assets),
BuyExecution { fees: asset, weight_limit: Unlimited },
DepositAsset { assets, beneficiary },
]);
```
to this:
```rust
let message: Xcm<()> = Xcm::builder()
.withdraw_asset(assets)
.buy_execution(asset, Unlimited),
.deposit_asset(assets, beneficiary)
.build();
```
---------
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
Co-authored-by: command-bot <>
closes https://github.com/paritytech/polkadot-sdk/issues/1882
## Breaking Changes
This PR introduces a new item to `pallet_balances::Config`:
```diff
trait Config {
++ type RuntimeFreezeReasons;
}
```
This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.
In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.
This requires: https://github.com/paritytech/scale-info/pull/197
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
* Rename `polkadot-parachain` to `polkadot-parachain-primitives`
While doing this it also fixes some last `rustdoc` issues and fixes
another Cargo warning related to `pallet-paged-list`.
* Fix compilation
* ".git/.scripts/commands/fmt/fmt.sh"
* Fix XCM docs
---------
Co-authored-by: command-bot <>
* Rename squatted crates
This commit adds the staging- prefix to squatted crates so we can go forward and publish them to crates.io.
Using the staging- prefix is a temp fix until we decide on replacement names.
https://forum.parity.io/t/renaming-squated-crates-in-substrate-polkadot-cumulus/1964/6
* Fix test after crate renames
* Update Lockfile
* Set test crates to nopublish
* Don't publish more crates
* Set even more crates to nopublish
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Happy New Year!
* Remove year entierly
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Remove years from copyright notice in the entire repo
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Juan Ignacio Rios