* Accept only `--in-peers` many inbound full nodes in `SyncingEngine`
Due to full and light nodes being stored in the same set, it's possible
that `SyncingEngine` accepts more than `--in-peers` many inbound full
nodes which leaves some of its outbound slots unoccupied.
`ProtocolController` still tries to occupy these slots by opening
outbound substreams. As these substreams are accepted by the remote peer,
the connection is relayed to `SyncingEngine` which rejects the node
because it's already full. This in turn results in the substream being
inactive and the peer getting evicted.
Fixing this properly would require relocating the light peer slot
allocation away from `ProtocolController` or alternatively moving entire
the substream validation there, both of which are epic refactorings and
not necessarily in line with other goals. As a temporary measure, verify
in `SyncingEngine` that it doesn't accept more than the specified amount
of inbound full peers.
* Fix tests
* Apply review comments
* Don't start evicting peers right after `SyncingEngine` is started
Parachain collators may need to wait to receive a relaychain block before
they can start producing blocks which can cause `SyncingEngine` to
incorrectly evict them.
When `SyncingEngine` is started, wait 2 minutes before the eviction is
activated to give collators a chance to produce a block.
* fix doc
* Use `continue` instead of `break`
* Trigger CI
---------
Co-authored-by: parity-processbot <>
* Prepare `sc-network` for `ProtocolController`/`NotificationService`
The upcoming notification protocol refactoring requires that protocols
are able to communicate with `sc-network` over unique and direct links.
This means that `sc-network` side of the link has to be created before
`sc-network` is initialized and that it is allowed to consume the object
as the receiver half of the link may not implement `Clone`.
Remove request-response and notification protocols from `NetworkConfiguration`
and create a new object that contains the configurations of these protocols
and which is consumable by `sc-network`. This is needed needed because, e.g.,
the receiver half of `NotificationService` is not clonable so `sc-network`
must consume it when it's initializing the protocols in `Notifications`.
Similar principe applies to `PeerStore`/`ProtocolController`: as per current
design, protocols are created before the network so `Protocol` cannot be
the one creating the `PeerStore` object. `FullNetworkConfiguration` will be
used to store the objects that `sc-network` will use to communicate with
protocols and it will also allow protocols to allocate handles so they
can directly communicate with `sc-network`.
* Fixes
* Update client/service/src/builder.rs
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Updates
* Doc updates + cargo-fmt
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Pin ci-linux image for rust 1.69
* Update ui tests for rust 1.69
* Address new rust 1.69 clippy lints
* `derive_hash_xor_eq` has been renamed to `derived_hash_with_manual_eq`
* The new `extra-unused-type-parameters` complains about a bunch of
callsites where extraneous type parameters are used for consistency
with other functions.
Before this wasn't printing a warning for `VerificationFailed` when there wasn't a peer assigned to
the error message. However, if there happens an error on importing the state there wouldn't be any
error. This pr improves the situation to also print an error in this case. Besides that there are
some other cleanups.
* Evict inactive peers from `SyncingEngine`
If both halves of the block announce notification stream have been
inactive for 2 minutes, report the peer and disconnect it, allowing
`SyncingEngine` to free up a slot for some other peer that hopefully
is more active.
This needs to be done because the node may falsely believe it has open
connections to peers because the inbound substream can be closed without
any notification and closed outbound substream is noticed only when node
attempts to write to it which may not happen if the node has nothing to
send.
* zzz
* wip
* Evict peers only when timeout expires
* Use `debug!()`
---------
Co-authored-by: parity-processbot <>
* Keep track of the pending response for each peer individually
When peer disconnects or the syncing is restarted, remove the pending
response so syncing won't start sending duplicate requests/receive stale
responses from disconnected peers.
Before this commit pending responses where stored in `FuturesUnordered`
which made it hard to keep track of pending responses for each individual
peer.
* Update client/network/sync/src/lib.rs
Co-authored-by: Bastian Köcher <git@kchr.de>
* ".git/.scripts/commands/fmt/fmt.sh"
* Apply suggestions from code review
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
* Update client/network/sync/src/lib.rs
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: command-bot <>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
* Attempt to relieve pressure on `mpsc_network_worker`
`SyncingEngine` interacting with `NetworkWorker` can put a lot of strain
on the channel if the number of inbound connections is high. This is
because `SyncingEngine` is notified of each inbound substream which it
then can either accept or reject and this causes a lot of message
exchange on the already busy channel.
Use a direct channel pair between `Protocol` and `SyncingEngine`
to exchange notification events. It is a temporary change to alleviate
the problems caused by syncing being an independent protocol and the
fix will be removed once `NotificationService` is implemented.
* Apply review comments
* fixes
* trigger ci
* Fix tests
Verify that both peers have a connection now that the validation goes
through `SyncingEngine`. Depending on how the tasks are scheduled,
one of them might not have the peer registered in `SyncingEngine` at which
point the test won't make any progress because block announcement received
from an unknown peer is discarded.
Move polling of `ChainSync` at the end of the function so that if a block
announcement causes a block request to be sent, that can be sent in the
same call to `SyncingEngine::poll()`.
---------
Co-authored-by: parity-processbot <>
`Protocol` is not a reliable source for the information of connected
peers because it doesn't have real-time information of the actual
connectivity state because it's not resposible for accepting/rejecting
connections and gets that information with delay from `SyncinEngine`.
* Move service tests to `client/network/tests`
These tests depend on `sc-network` and `sc-network-sync` so they should
live outside the crate.
* Move some configs from `sc-network-common` to `sc-network`
* Move `NetworkService` traits to `sc-network`
* Move request-responses to `sc-network`
* Remove more stuff
* Remove rest of configs from `sc-network-common` to `sc-network`
* Remove more stuff
* Fix warnings
* Update client/network/src/request_responses.rs
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Fix cargo doc
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Move import queue out of `sc-network`
Add supplementary asynchronous API for the import queue which means
it can be run as an independent task and communicated with through
the `ImportQueueService`.
This commit removes removes block and justification imports from
`sc-network` and provides `ChainSync` with a handle to import queue so
it can import blocks and justifications. Polling of the import queue is
moved complete out of `sc-network` and `sc_consensus::Link` is
implemented for `ChainSyncInterfaceHandled` so the import queue
can still influence the syncing process.
* Move stuff to SyncingEngine
* Move `ChainSync` instanation to `SyncingEngine`
Some of the tests have to be rewritten
* Move peer hashmap to `SyncingEngine`
* Let `SyncingEngine` to implement `ChainSyncInterface`
* Introduce `SyncStatusProvider`
* Move `sync_peer_(connected|disconnected)` to `SyncingEngine`
* Implement `SyncEventStream`
Remove `SyncConnected`/`SyncDisconnected` events from
`NetworkEvenStream` and provide those events through
`ChainSyncInterface` instead.
Modify BEEFY/GRANDPA/transactions protocol and `NetworkGossip` to take
`SyncEventStream` object which they listen to for incoming sync peer
events.
* Introduce `ChainSyncInterface`
This interface provides a set of miscellaneous functions that other
subsystems can use to query, for example, the syncing status.
* Move event stream polling to `SyncingEngine`
Subscribe to `NetworkStreamEvent` and poll the incoming notifications
and substream events from `SyncingEngine`.
The code needs refactoring.
* Make `SyncingEngine` into an asynchronous runner
This commits removes the last hard dependency of syncing from
`sc-network` meaning the protocol now lives completely outside of
`sc-network`, ignoring the hardcoded peerset entry which will be
addressed in the future.
Code needs a lot of refactoring.
* Fix warnings
* Code refactoring
* Use `SyncingService` for BEEFY
* Use `SyncingService` for GRANDPA
* Remove call delegation from `NetworkService`
* Remove `ChainSyncService`
* Remove `ChainSync` service tests
They were written for the sole purpose of verifying that `NetworWorker`
continues to function while the calls are being dispatched to
`ChainSync`.
* Refactor code
* Refactor code
* Update client/finality-grandpa/src/communication/tests.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Fix warnings
* Apply review comments
* Fix docs
* Fix test
* cargo-fmt
* Update client/network/sync/src/engine.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Update client/network/sync/src/engine.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Add missing docs
* Refactor code
---------
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* improve error message
* removed unused argument
* docs: disconnect_peer_inner no longer accepts `ban`
* remove redundant trace message
```
sync: Too many full nodes, rejecting 12D3KooWSQAP2fh4qBkLXBW4mvCtbAiK8sqMnExWHHTZtVAxZ8bQ
sync: 12D3KooWSQAP2fh4qBkLXBW4mvCtbAiK8sqMnExWHHTZtVAxZ8bQ disconnected
```
is enough to understand that we've refused to connect to the given peer
* Revert "removed unused argument"
This reverts commit c87f755b1fd03494fb446b604fe25c2418da7c87.
* ban peer for 10s after disconnect
* do not accept incoming conns if peer was banned
* Revert "do not accept incoming conns if peer was banned"
This reverts commit 7e59d05975765f2547468e9dcfd1361516c41e06.
* Revert "ban peer for 10s after disconnect"
This reverts commit 3859201ced42a5b2d18c0600e29efd20962a7289.
* Revert "Revert "removed unused argument""
This reverts commit f1dc623646dc5a69e1822c35f428e90dffe34d95.
* format code
* Revert "remove redundant trace message"
This reverts commit a87e65f08553dbe69027e9aa4f7ca4779ccaa7f2.
* Change copyright year to 2023 from 2022
* Fix incorrect update of copyright year
* Remove years from copy right header
* Fix remaining files
* Fix typo in a header and remove update-copyright.sh
* `BlockId` removal: `BlockBuilderProvider::new_block_at`
It changes the arguments of `BlockBuilderProvider::new_block_at` from:
`BlockId<Block>` to: `Block::Hash`
* fmt
* fix
* more fixes
* Convert `NetworkWorker::poll()` into async `next_action()`
* Use `NetworkWorker::next_action` instead of `poll` in `sc-network-test`
* Revert "Use `NetworkWorker::next_action` instead of `poll` in `sc-network-test`"
This reverts commit 4b5d851ec864f78f9d083a18a618fbe117c896d2.
* Fix `sc-network-test` to poll `NetworkWorker::next_action`
* Fix `sc_network::service` tests to poll `NetworkWorker::next_action`
* Fix docs
* kick CI
* Factor out `next_worker_message()` & `next_swarm_event()`
* Error handling: replace `futures::pending!()` with `expect()`
* Simplify stream polling in `select!`
* Replace `NetworkWorker::next_action()` with `run()`
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* minor: comment
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* Print debug log when network future is shut down
* Evaluate `NetworkWorker::run()` future once before the loop
* Fix client code to match new `NetworkService` interfaces
* Make clippy happy
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* Revert "Apply suggestions from code review"
This reverts commit 9fa646d0ed613e5f8623d3d37d1d59ec0a535850.
* Make `NetworkWorker::run()` consume `self`
* Terminate system RPC future if RPC rx stream has terminated.
* Rewrite with let-else
* Fix comments
* Get `best_seen_block` and call `on_block_finalized` via `ChainSync` instead of `NetworkService`
* rustfmt
* make clippy happy
* Tests: schedule wake if `next_action()` returned true
* minor: comment
* minor: fix `NetworkWorker` rustdoc
* minor: amend the rustdoc
* Fix bug that caused `on_demand_beefy_justification_sync` test to hang
* rustfmt
* Apply review suggestions
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* Move import queue out of `sc-network`
Add supplementary asynchronous API for the import queue which means
it can be run as an independent task and communicated with through
the `ImportQueueService`.
This commit removes removes block and justification imports from
`sc-network` and provides `ChainSync` with a handle to import queue so
it can import blocks and justifications. Polling of the import queue is
moved complete out of `sc-network` and `sc_consensus::Link` is
implemented for `ChainSyncInterfaceHandled` so the import queue
can still influence the syncing process.
* Fix tests
* Apply review comments
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* Update client/network/sync/src/lib.rs
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Bastian Köcher <git@kchr.de>
* Replace deprecated libp2p feature specs with correct ones
* Bump tokio to 1.21.2
* Replace async-std libp2p primitives with tokio ones
* minor: rustfmt
* Fix TestNet to run initialization in the tokio context
* Convert telemetry test from async-std to tokio
* Convert notifications tests from async-std to tokio
* Convert chain sync tests from async-std to tokio
* Ditch async-std completely
* Make executor mandatory
* Bump tokio to 1.22.0
* minor: rustfmt
* Explicitly use tokio runtime in tests
* Move more tests to explicit tokio runtime
* Explicitly set multithreaded runtime in tokio test
* minor: rustfmt
* minor: fix comment
* Replace async-std with tokio in MMR tests
* Do not update peer information if ancestor search is in progress
If block announcement is received from a peer while ancestor search
for that same peer is still in progress, do not update the peer's best
hash and best number as that causes the ancestor search to yield
different information from what was expected and can cause, for example,
a fork of lower height not be be downloaded.
* Block until peers are in sync
* BlockId removal: refactor: Backend::block_indexed_body
It changes the arguments of `Backend::block_indexed_body` method from: `BlockId<Block>` to: `&Block::Hash`
This PR is part of BlockId::Number refactoring analysis (paritytech/substrate#11292)
* trigger CI job
* BlockId removal: refactor: Backend::justifications
It changes the arguments of `Backend::justifications` method from: `BlockId<Block>` to: `&Block::Hash`
This PR is part of BlockId::Number refactoring analysis (paritytech/substrate#11292)
* trigger CI job
* trigger CI job
* bug fix
* match -> if
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
It changes the arguments of `Backend::body` method from: `BlockId<Block>` to: `&Block::Hash`
This PR is part of BlockId::Number refactoring analysis (paritytech/substrate#11292)
Co-authored-by: parity-processbot <>
Introduce a middleware called `NetworkServiceProvider` which the
`ChainSync` can use to communicate with `NetworkService`. `ChainSync` is
given a `NetworkServiceHandle` which it uses to call `NetworkServiceProvider`
which then dispatches the calls to `NetworkService` on behalf of `ChainSync`.
This change will allow `ChainSync` to disconnect and report peers and
in the future it'll be possible to send requests and notifications
through the `NetworkServiceProvider`.
`NetworkServiceProvider` is needed only until the `ChainSync` object
has been removed from `Protocol`. After that, a normal `NetworkService`
handle can be passed onto `ChainSync` and these changes can be
deprecated.
Co-authored-by: parity-processbot <>
* BlockId removal: refactor: Finalizer
It changes the arguments of methods of `Finalizer` trait from:
block: `BlockId<Block>` to: hash: `&Block::Hash`
This PR is part of BlockId::Number refactoring analysis (paritytech/substrate#11292)
* minor corrections
* failing test corrected
* minor rework
* BlockId removal: refactor: ProofProvider
It changes the arguments of methods of `ProofProvider` trait from:
block: `BlockId<Block>` to: hash: `&Block::Hash`
This PR is part of BlockId::Number refactoring analysis (paritytech/substrate#11292)
* LightClientRequestHandler: excessive BlockIdTo bound removed
* imports cleanup
* formatting
* args tyeps cleanup
* Introduce `ChainSyncInterface`
`ChainSyncInterface` provides an asynchronous interface for other
subsystems to submit calls to `ChainSync`. This allows `NetworkService`
to delegate calls to `ChainSync` while still providing the same API
for other subsystems (for now). This makes it possible to move the
syncing code in piecemeal fashion out of `protocol.rs` as the calls
are just forwarded to `ChainSync`.
* Apply review comments
* Fix tests
* Introduce mockable `ChainSync` object for testing
`mockall` allows to mock `ChainSync` and to verify that the calls made
to `ChaiSync` are firstly executed at all, that they're executed in
correct order and with correct parameters.
This allows to verify, e.g., that delegating calls directly to
`ChainSync` from `NetworkService` still calls the correct functions with
correct arguments even if `Protocol` middleman is removed.
* Add Cargo.lock
* Fix tests
* Update client/network/Cargo.toml
Co-authored-by: Bastian Köcher <git@kchr.de>
* Update Cargo.lock
* Fix clippy and documentation
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: parity-processbot <>
Dmitry Markin