First in a series of PRs that reduces our use of sp-std with a view to
deprecating it.
This is just looking at /substrate and moving some of the references
from `sp-std` to `core`.
These particular changes should be uncontroversial.
Where macros are used `::core` should be used to remove any ambiguity.
part of https://github.com/paritytech/polkadot-sdk/issues/2101
I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
## Problem
The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.
It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.
**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
/// from pallet_nis
#[pallet::composite_enum]
pub enum HoldReason {
NftReceipt,
}
/// from pallet_preimage
#[pallet::composite_enum]
pub enum HoldReason {
Preimage,
}
// from pallet_state-trie-migration
#[pallet::composite_enum]
pub enum HoldReason {
SlashForContinueMigrate,
SlashForMigrateCustomTop,
SlashForMigrateCustomChild,
}
```
- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {
#[codec(index = 32u8)]
Preimage(pallet_preimage::HoldReason),
#[codec(index = 38u8)]
Nis(pallet_nis::HoldReason),
#[codec(index = 42u8)]
StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```
- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)
However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
```
// pseudo-code - if we try to call all of these:
T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;
// With `type MaxHolds = ConstU32<3>` these two will fail
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
```
## Solutions
A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.
The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {
#[pallet::composite_enum]
pub enum HoldReason {
ModuleSingleInstanceReason1,
ModuleSingleInstanceReason2,
}
...
}
#[frame_support::pallet(dev_mode)]
mod module_multi_instance {
#[pallet::composite_enum]
pub enum HoldReason<I: 'static = ()> {
ModuleMultiInstanceReason1,
ModuleMultiInstanceReason2,
ModuleMultiInstanceReason3,
}
...
}
impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
for RuntimeHoldReason
{
const VARIANT_COUNT: u32 = 0
+ module_single_instance::HoldReason::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```
In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.
## For reviewers
Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs`
- `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
- `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`
And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`
## Next steps
Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.
---------
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
Step towards https://github.com/paritytech/polkadot-sdk/issues/1975
As reported
https://github.com/paritytech/polkadot-sdk/issues/1975#issuecomment-1774534225
I'd like to encapsulate crypto related stuff in a dedicated folder.
Currently all cryptographic primitive wrappers are all sparsed in
`substrate/core` which contains "misc core" stuff.
To simplify the process, as the first step with this PR I propose to
move the cryptographic hashing there.
The `substrate/crypto` folder was already created to contains `ec-utils`
crate.
Notes:
- rename `sp-core-hashing` to `sp-crypto-hashing`
- rename `sp-core-hashing-proc-macro` to `sp-crypto-hashing-proc-macro`
- As the crates name is changed I took the freedom to restart fresh from
version 0.1.0 for both crates
---------
Co-authored-by: Robert Hambrock <roberthambrock@gmail.com>
This PR allows _username authorities_ to issue unique usernames that
correspond with an account. It also provides two-way lookup, that is
from `AccountId` to a single, "primary" `Username` (alongside
`Registration`) and multiple unique `Username`s to an `AccountId`.
Key features:
- Username Authorities added (and removed) via privileged origin.
- Authorities have a `suffix` and an `allocation`. They can grant up to
`allocation` usernames. Their `suffix` will be appended to the usernames
that they issue. A suffix may be up to 7 characters long.
- Users can ask an authority to grant them a username. This will take
the form `myusername.suffix`. The entire name (including suffix) must be
less than or equal to 32 alphanumeric characters.
- Users can approve a username for themselves in one of two ways (that
is, authorities cannot grant them arbitrarily):
- Pre-sign the entire username (including suffix) with a secret key that
corresponds to their `AccountId` (for keyed accounts, obviously); or
- Accept the username after it has been granted by an authority (it will
be queued until accepted) (for non-keyed accounts like pure proxies or
multisigs).
- The system does not require any funds or deposits. Users without an
identity will be given a default one (presumably all fields set to
`None`). If they update this info, they will need to place the normal
storage deposit.
- If a user does not have any username, their first one will be set as
`Primary`, and their `AccountId` will map to that one. If they get
subsequent usernames, they can choose which one to be their primary via
`set_primary_username`.
- There are some state cleanup functions to remove expired usernames
that have not been accepted and dangling usernames whose owners have
called `clear_identity`.
TODO:
- [x] Add migration to runtimes
- [x] Probably do off-chain migration into People Chain genesis
- [x] Address a few TODO questions in code (please review)
---------
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
This PR is a follow up to #1661
- [x] rename the `simple` module to `legacy`
- [x] fix benchmarks to disregard the number of additional fields
- [x] change the storage deposits to charge per encoded byte of the
identity information instance, removing the need for `fn
additional(&self) -> usize` in `IdentityInformationProvider`
- [x] ~add an extrinsic to rejig deposits to account for the change
above~
- [ ] ~ensure through proper configuration that the new byte-based
deposit is always lower than whatever is reserved now~
- [x] remove `IdentityFields` from the `set_fields` extrinsic signature,
as per [this
discussion](https://github.com/paritytech/polkadot-sdk/pull/1661#discussion_r1371703403)
> ensure through proper configuration that the new byte-based deposit is
always lower than whatever is reserved now
Not sure this is needed anymore. If the new deposits are higher than
what is currently on chain and users don't have enough funds to reserve
what is needed, the extrinisc fails and they're basically grandfathered
and frozen until they add more funds and/or make a change to their
identity. This behavior seems fine to me. Original idea
[here](https://github.com/paritytech/polkadot-sdk/pull/1661#issuecomment-1779606319).
> add an extrinsic to rejig deposits to account for the change above
This was initially implemented but now removed from this PR in favor of
the implementation detailed
[here](https://github.com/paritytech/polkadot-sdk/pull/2088).
---------
Signed-off-by: georgepisaltu <george.pisaltu@parity.io>
Co-authored-by: joepetrowski <joe@parity.io>
Fixes#179
# Description
This PR makes the structure containing identity information used in
`pallet-identity` generic through the pallet `Config`. Additionally, the
old structure is now available in a separate module called `simple`
(pending rename) and is compatible with the new interface.
Another change in this PR is that while the `additional` field in
`IdentityInfo` stays for backwards compatibility reasons, the associated
costs are stil present in the pallet through the `additional` function
in the `IdentityInformationProvider` interface. This function is marked
as deprecated as it is only a temporary solution to the backwards
compatibility problem we had. In short, we could have removed the
additional fields in the struct and done a migration, but we chose to
wait and do it off-chain through the genesis of the system parachain.
After we move the identity pallet to the parachain, additional fields
will be migrated into the existing fields and the `additional` key-value
store will be removed. Until that happens, this interface will provide
the necessary information to properly account for the associated costs.
Additionally, this PR fixes an unrelated issue; the `IdentityField` enum
used to represent the fields as bitflags couldn't store more than 8
fields, even though it was marked as `#[repr(u64)]`. This was because of
the `derive` implementation of `TypeInfo`, which assumed `u8` semantics.
The custom implementation of this trait in
https://github.com/paritytech/polkadot-sdk/commit/0105cc0396b7a53d0b290f48b1225847f6d17321
fixes the issue.
---------
Signed-off-by: georgepisaltu <george.pisaltu@parity.io>
Co-authored-by: Sam Johnson <sam@durosoft.com>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
closes https://github.com/paritytech/polkadot-sdk/issues/1882
## Breaking Changes
This PR introduces a new item to `pallet_balances::Config`:
```diff
trait Config {
++ type RuntimeFreezeReasons;
}
```
This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.
In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Moving a few pallets to the latest and greatest `derive_impl` to give it
a try.
Part of #171
---------
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* wip
* remove index in lieu of nonce
* wip
* remove accountnonce in lieu of nonce
* add minor improvement
* rebase and merge conflicts
* HoldReason: Improve usage
`HoldReason` was switched recently to use the `composite_enum` attribute that will merge the enums
from all pallets in the runtime to `RuntimeHoldReason`. `pallet-nis` was still requiring that the
variant was passed as constant to call `hold`. The proper implementation is to use the `HoldReason`
from inside the pallet directly when calling `hold`. This is done by adding a `RuntimeHoldReason` as
type to the `Config` trait and requiring that `Currency` is using the same reason. Besides that the
pr changes the name `HoldIdentifier` in `pallet_balances::Config` to `RuntimeHoldReason`.
* Update frame/nis/src/lib.rs
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Review comment
* Fixes
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* chore: reduce copy bytes for core-hashing
* improve by suggestions and remove unused `xx_into`
* chore: replace sha2 crate by `sp_core::hashing` for pallet-alliance
* fix features
* use sp-core-hashing directly
* add to dev-dep
* Change copyright year to 2023 from 2022
* Fix incorrect update of copyright year
* Remove years from copy right header
* Fix remaining files
* Fix typo in a header and remove update-copyright.sh
* allow fellows to abdicate voting rights
* rename founders to founding fellows, give equal power
* Drop FoundingFellow role and veto call (#12762)
* drop FoundingFellow role
* drop veto call
* Storage migration to remove founder role (#12766)
* storage migration to remove founder role
* skip migration if no members
* truncate the final fellows set if overflows
* change log - action order
* MemberAbdicated -> FellowAbdicated
Co-authored-by: Muharem Ismailov <ismailov.m.h@gmail.com>
* BREAKING: Rename Origin
* more renaming
* a bit more renaming
* fix
* more fixing
* fix in frame_support
* even more fixes
* fix
* small fix
* ...
* update .stderr
* docs
* update docs
* update docs
* docs
* pallet-identity: Be more paranoid ;)
Check that a registrar is providing judgement for the correct identity.
* Fixes
* Fix alliance
* 🤦
* Fixes
* ...
* Alliance pallet: add force_set_members instead of init_members function
* benchmark with witness data
* remove invalid limit for clear
* Apply suggestions from code review
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
* Revert "remove invalid limit for clear"
This reverts commit dba54e3071b63bfea908087aef213f4640e3ccbf.
* compile constructor only for test
* Update comments for force_set_members
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
* ".git/.scripts/bench-bot.sh" pallet dev pallet_alliance
* benchmark - founders count range
* Revert "benchmark - founders count range"
This reverts commit aad16796f8dfed48079fb7f587b8f5b59382cda6.
* witness members count instead votable members count
* update the doc
* use decode_len for witness data checks
* change witness data member count to voting member count; update clear limits
* ".git/.scripts/bench-bot.sh" pallet dev pallet_alliance
* merge master
* fixes after merge master
* revert to cb3e63
* disband alliance and return deposits
* revert debug changes
* weights
* update docs
* update test comments
* Apply Joe suggestions from code review
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
* rename event from AllianceDisband to AllianceDisbanded
* ".git/.scripts/bench-bot.sh" pallet dev pallet_alliance
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: command-bot <>
gupnik