First in a series of PRs that reduces our use of sp-std with a view to
deprecating it.
This is just looking at /substrate and moving some of the references
from `sp-std` to `core`.
These particular changes should be uncontroversial.
Where macros are used `::core` should be used to remove any ambiguity.
part of https://github.com/paritytech/polkadot-sdk/issues/2101
I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
## Problem
The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.
It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.
**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
/// from pallet_nis
#[pallet::composite_enum]
pub enum HoldReason {
NftReceipt,
}
/// from pallet_preimage
#[pallet::composite_enum]
pub enum HoldReason {
Preimage,
}
// from pallet_state-trie-migration
#[pallet::composite_enum]
pub enum HoldReason {
SlashForContinueMigrate,
SlashForMigrateCustomTop,
SlashForMigrateCustomChild,
}
```
- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {
#[codec(index = 32u8)]
Preimage(pallet_preimage::HoldReason),
#[codec(index = 38u8)]
Nis(pallet_nis::HoldReason),
#[codec(index = 42u8)]
StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```
- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)
However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
```
// pseudo-code - if we try to call all of these:
T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;
// With `type MaxHolds = ConstU32<3>` these two will fail
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
```
## Solutions
A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.
The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {
#[pallet::composite_enum]
pub enum HoldReason {
ModuleSingleInstanceReason1,
ModuleSingleInstanceReason2,
}
...
}
#[frame_support::pallet(dev_mode)]
mod module_multi_instance {
#[pallet::composite_enum]
pub enum HoldReason<I: 'static = ()> {
ModuleMultiInstanceReason1,
ModuleMultiInstanceReason2,
ModuleMultiInstanceReason3,
}
...
}
impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
for RuntimeHoldReason
{
const VARIANT_COUNT: u32 = 0
+ module_single_instance::HoldReason::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```
In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.
## For reviewers
Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs`
- `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
- `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`
And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`
## Next steps
Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.
---------
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
# Note for reviewer
Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.
# Description
Added XCMv4.
## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation
In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.
## Removed `Abstract` asset id
It was not being used anywhere and this simplifies the code.
Now assets are just constructed as follows:
```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```
No need for specifying `Concrete` anymore.
## Outcome is now a named fields struct
Instead of
```rust
pub enum Outcome {
Complete(Weight),
Incomplete(Weight, Error),
Error(Error),
}
```
we now have
```rust
pub enum Outcome {
Complete { used: Weight },
Incomplete { used: Weight, error: Error },
Error { error: Error },
}
```
## Added Reanchorable trait
Now both locations and assets implement this trait, making it easier to
reanchor both.
## New syntax for building locations and junctions
Now junctions are built using the following methods:
```rust
let location = Location {
parents: 1,
interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```
or
```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```
And they are matched like so:
```rust
match location.unpack() {
(1, [Parachain(id)]) => ...
(0, Here) => ...,
(1, [_]) => ...,
}
```
This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.
This was needed to make all sizes smaller.
# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id
---------
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
Original PR https://github.com/paritytech/substrate/pull/14655
---
Partial https://github.com/paritytech/polkadot-sdk/issues/225
- [x] Adds conformance tests for Unbalanced
- [x] Adds conformance tests for Balanced
- Several minor fixes to fungible default implementations and the
Balances pallet
- [x] `Unbalanced::decrease_balance` can reap account when
`Preservation` is `Preserve`
- [x] `Balanced::pair` can return pairs of imbalances which do not
cancel each other out
- [x] Balances pallet `active_issuance` 'underflow'
- [x] Refactors the conformance test file structure to match the
fungible file structure: tests for traits in regular.rs go into a test
file named regular.rs, tests for traits in freezes.rs go into a test
file named freezes.rs, etc.
- [x] Improve doc comments
- [x] Simplify macros
## Fixes
### `Unbalanced::decrease_balance` can reap account when called with
`Preservation::Preserve`
There is a potential issue in the default implementation of
`Unbalanced::decrease_balance`. The implementation can delete an account
even when it is called with `preservation: Preservation::Preserve`. This
seems to contradict the documentation of `Preservation::Preserve`:
```rust
/// The account may not be killed and our provider reference must remain (in the context of
/// tokens, this means that the account may not be dusted).
Preserve,
```
I updated `Unbalanced::decrease_balance` to return
`Err(TokenError::BelowMinimum)` when a withdrawal would cause the
account to be reaped and `preservation: Preservation::Preserve`.
- [ ] TODO Confirm with @gavofyork that this is correct behavior
Test for this behavior:
https://github.com/paritytech/polkadot-sdk/blob/e5c876dd6b59e2b7dbacaa4538cb42c802db3730/substrate/frame/support/src/traits/tokens/fungible/conformance_tests/regular.rs#L912-L937
### `Balanced::pair` returning non-canceling pairs
`Balanced::pair` is supposed to create a pair of imbalances that cancel
each other out. However this is not the case when the method is called
with an amount greater than the total supply.
In the existing default implementation, `Balanced::pair` creates a pair
by first rescinding the balance, creating `Debt`, and then issuing the
balance, creating `Credit`.
When creating `Debt`, if the amount to create exceeds the
`total_supply`, `total_supply` units of `Debt` are created *instead* of
`amount` units of `Debt`. This can lead to non-canceling amount of
`Credit` and `Debt` being created.
To address this, I create the credit and debt directly in the method
instead of calling `issue` and `rescind`.
Test for this behavior:
https://github.com/paritytech/polkadot-sdk/blob/e5c876dd6b59e2b7dbacaa4538cb42c802db3730/substrate/frame/support/src/traits/tokens/fungible/conformance_tests/regular.rs#L1323-L1346
### `Balances` pallet `active_issuance` 'underflow'
This PR resolves an issue in the `Balances` pallet that can lead to odd
behavior of `active_issuance`.
Currently, the Balances pallet doesn't check if `InactiveIssuance`
remains less than or equal to `TotalIssuance` when supply is
deactivated. This allows `InactiveIssuance` to be greater than
`TotalIssuance`, which can result in unexpected behavior from the
perspective of the fungible API.
`active_issuance` is derived from
`TotalIssuance.saturating_sub(InactiveIssuance)`.
If an `amount` is deactivated that causes `InactiveIssuance` to become
greater TotalIssuance, `active_issuance` will return 0. However once in
that state, reactivating an amount will not increase `active_issuance`
by the reactivated `amount` as expected.
Consider this test where the last assertion would fail due to this
issue:
https://github.com/paritytech/polkadot-sdk/blob/e5c876dd6b59e2b7dbacaa4538cb42c802db3730/substrate/frame/support/src/traits/tokens/fungible/conformance_tests/regular.rs#L1036-L1071
To address this, I've modified the `deactivate` function to ensure
`InactiveIssuance` never surpasses `TotalIssuance`.
---------
Co-authored-by: Muharem <ismailov.m.h@gmail.com>
Even though it is difficult to overflow the sufficients variable, since
an attacker that is willing to rapidly increase the number must every
time deposit a minimum deposit of a given asset, it is safer to use
saturating_add().
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
# Motivation (+testing)
### Enable easy `ForeignAssets` transfers using `pallet-xcm`
We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?
This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.
This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).
Added `xcm-emulator` tests for this scenario ^.
# Description
Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.
Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.
`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.
- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.
## Review notes
Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.
---------
Co-authored-by: command-bot <>
Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.
If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html
@ggwpez, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.
TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
closes https://github.com/paritytech/polkadot-sdk/issues/1882
## Breaking Changes
This PR introduces a new item to `pallet_balances::Config`:
```diff
trait Config {
++ type RuntimeFreezeReasons;
}
```
This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.
In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.
This requires: https://github.com/paritytech/scale-info/pull/197
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
* Fix std, runtime-benchmarks and try-runtime features
zepter lint propagate-feature --feature try-runtime --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="try-runtime:frame-try-runtime"
zepter lint propagate-feature --feature runtime-benchmarks --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking"
zepter lint propagate-feature --feature std --left-side-feature-missing=ignore --workspace --fix
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add propagate feature CI check
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Test CI by adding an error
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Use --locked
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add help msg
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert "Test CI by adding an error"
This reverts commit cf4ff6cc0632269b0a109e547686e5e3314b02de.
* Test CI by adding an error
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* No newline in help msg
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert "Test CI by adding an error"
This reverts commit 5daa06ada8e01f5bebafb9d1c76804dd79bc1006.
* Test CI by adding an error
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert "Test CI by adding an error"
This reverts commit ca15de5729507a564f140a10ec2e87b19516ec4c.
* Fix msg
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert back to master
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Re-do with Zepter v0.7.4
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update Zepter to 0.7.4
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Disable rococo try-runtime check
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* More review fixes
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* wip
* remove index in lieu of nonce
* wip
* remove accountnonce in lieu of nonce
* add minor improvement
* rebase and merge conflicts
* HoldReason: Improve usage
`HoldReason` was switched recently to use the `composite_enum` attribute that will merge the enums
from all pallets in the runtime to `RuntimeHoldReason`. `pallet-nis` was still requiring that the
variant was passed as constant to call `hold`. The proper implementation is to use the `HoldReason`
from inside the pallet directly when calling `hold`. This is done by adding a `RuntimeHoldReason` as
type to the `Config` trait and requiring that `Currency` is using the same reason. Besides that the
pr changes the name `HoldIdentifier` in `pallet_balances::Config` to `RuntimeHoldReason`.
* Update frame/nis/src/lib.rs
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Review comment
* Fixes
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Remove the `Copy` bound on `AssetId`
* Also relax the `Copy` bound in the assets pallet
* Fix warnings on the newest nightly Rust
* Remove some unnecessary `clone()`s
* Try to satisfy clippy
* Remove some more unnecessary `clone()`s
* Add more `.clone()`s for newly merged code
* Also add `clone()`s in the benchmarks
---------
Co-authored-by: parity-processbot <>
* frame: Default for GenesisConfig in no_std
`Default` for `GenesisConfig` will be required for no_std in no native
runtime world. It must be possible to instantiate default GenesisConfig
for pallets and runtime.
* ".git/.scripts/commands/fmt/fmt.sh"
* hash69 in no_std reverted
* derive(DefaultNoBound) for GenesisConfig used when possible
* treasury: derive(Default)
* Cargo.lock update
* genesis_config: compiler error improved
When std feature is not enabled for pallet, the GenesisConfig will be
defined, but serde::{Serialize,Deserialize} traits will not be
implemented.
The compiler error indicates the reason of latter errors.
This is temporary and serde traits will be enabled with together with
`serde` support in frame.
---------
Co-authored-by: command-bot <>
* Fix: Incorrect implementation of can_reserve check
* Fix: Incorrect migration of consumer counting for existing accounts with frozen amounts
* Fix: Inconsistent implementation between assets can_deposit and new_account
* Fixes
* Fixes
* Another fix
* Update tests.rs
* Update fungible_tests.rs
* Use `can_accrue_consumers` in the body of `can_inc_consumer`
---------
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: parity-processbot <>
Squirrel