I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
## Problem
The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.
It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.
**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
/// from pallet_nis
#[pallet::composite_enum]
pub enum HoldReason {
NftReceipt,
}
/// from pallet_preimage
#[pallet::composite_enum]
pub enum HoldReason {
Preimage,
}
// from pallet_state-trie-migration
#[pallet::composite_enum]
pub enum HoldReason {
SlashForContinueMigrate,
SlashForMigrateCustomTop,
SlashForMigrateCustomChild,
}
```
- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {
#[codec(index = 32u8)]
Preimage(pallet_preimage::HoldReason),
#[codec(index = 38u8)]
Nis(pallet_nis::HoldReason),
#[codec(index = 42u8)]
StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```
- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)
However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
```
// pseudo-code - if we try to call all of these:
T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;
// With `type MaxHolds = ConstU32<3>` these two will fail
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
```
## Solutions
A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.
The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {
#[pallet::composite_enum]
pub enum HoldReason {
ModuleSingleInstanceReason1,
ModuleSingleInstanceReason2,
}
...
}
#[frame_support::pallet(dev_mode)]
mod module_multi_instance {
#[pallet::composite_enum]
pub enum HoldReason<I: 'static = ()> {
ModuleMultiInstanceReason1,
ModuleMultiInstanceReason2,
ModuleMultiInstanceReason3,
}
...
}
impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
for RuntimeHoldReason
{
const VARIANT_COUNT: u32 = 0
+ module_single_instance::HoldReason::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```
In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.
## For reviewers
Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs`
- `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
- `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`
And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`
## Next steps
Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.
---------
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
closes https://github.com/paritytech/polkadot-sdk/issues/1842
Decoupling Pallet from the Concept of Native Currency
Currently, the pallet is intrinsically linked with the concept of native
currency, requiring users to provide implementations of the
`fungible::*` and `fungibles::*` traits to interact with native and non
native assets. This incapsulates some non-related to the pallet
complexity and makes it less adaptable in contexts where the native
currency concept is absent.
With this PR, the dependence on `fungible::*` for liquidity-supplying
assets has been removed. Instead, the native and non-native currencies'
handling is now overseen by a single type that implements the
`fungibles::*` traits. To simplify this integration, types have been
introduced to facilitate the creation of a union between `fungible::*`
and `fungibles::*` implementations, producing a unified `fungibles::*`
type.
One of the reasons driving these changes is the ambition to create a
more user-friendly API for the `SwapCredit` implementation. Given that
it interacts with two distinct credit types from `fungible` and
`fungibles`, a unified type was introduced. Clients now manage potential
conversion failures for those credit types. In certain contexts, it's
vital to guarantee that operations are fail-safe, like in this impl -
[PR](https://github.com/paritytech/polkadot-sdk/pull/1845), place in
[code](https://github.com/paritytech/polkadot-sdk/blob/20b85a5fada8f55c98ba831964f5866ffeadf4da/cumulus/primitives/utility/src/lib.rs#L429).
Additional Updates:
- abstracted the pool ID and its account derivation logic via trait
bounds, along with common implementation offerings;
- removed `inc_providers` on a pool creation for the pool account;
- benchmarks:
-- swap complexity is N, not const;
-- removed `From<u128> + Into<u128>` bound from `T::Balance`;
-- removed swap/liquidity/.. amount constants, resolve them dynamically
based on pallet configuration;
-- migrated to v2 API;
- `OnUnbalanced` handler for the pool creation fee, replacing direct
transfers to a specified account ID;
- renamed `MultiAssetId` to `AssetKind` aligning with naming across
frame crates;
related PRs:
- (depends) https://github.com/paritytech/polkadot-sdk/pull/1677
- (caused) https://github.com/paritytech/polkadot-sdk/pull/2033
- (caused) https://github.com/paritytech/polkadot-sdk/pull/1876
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Introduces a swap implementation that allows the exchange of a credit
(aka Negative Imbalance) of one asset for a credit of another asset.
This is particularly useful when a credit swap is required but may not
have sufficient value to meet the ED constraint, hence cannot be
deposited to temp account before. An example use case is when XCM fees
are paid using an asset held in the XCM executor registry and has to be
swapped for native currency.
Additional Updates:
- encapsulates the existing `Swap` trait impl within a transactional
context, since partial storage mutation is possible when an error
occurs;
- supplied `Currency` and `Assets` impls must be implemented over the
same `Balance` type, the `AssetBalance` generic type is dropped. This
helps to avoid numerous type conversion and overflow cases. If those
types are different it should be handled outside of the pallet;
- `Box` asset kind on a pallet level, unbox on a runtime level - here
[why](https://substrate.stackexchange.com/questions/10039/boxed-argument-of-a-dispatchable/10103#10103);
- `path` uses `Vec` now, instead of `BoundedVec` since it is never used
in PoV;
- removes the `Transfer` event due to it's redundancy with the events
emitted by `fungible/s` implementations;
- modifies the `SwapExecuted` event type;
related issue:
- https://github.com/paritytech/polkadot-sdk/issues/105
related PRs:
- (required for) https://github.com/paritytech/polkadot-sdk/pull/1845
- (caused) https://github.com/paritytech/polkadot-sdk/pull/1717
// DONE make the pallet work only with `fungibles` trait and make it
free from the concept of a `native` asset -
https://github.com/paritytech/polkadot-sdk/issues/1842
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.
If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html
@ggwpez, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.
TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
closes https://github.com/paritytech/polkadot-sdk/issues/1882
## Breaking Changes
This PR introduces a new item to `pallet_balances::Config`:
```diff
trait Config {
++ type RuntimeFreezeReasons;
}
```
This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.
In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
The `xcm` crate was renamed to `staging-xcm` to be able to publish it to
crates.io as someone as squatted `xcm`. The problem with this rename is
that the `TypeInfo` includes the crate name which ultimately lands in
the metadata. The metadata is consumed by downstream users like
`polkadot-js` or people building on top of `polkadot-js`. These people
are using the entire `path` to find the type in the type registry. Thus,
their code would break as the type path would now be [`staging_xcm`,
`VersionedXcm`] instead of [`xcm`, `VersionedXcm`]. This pull request
fixes this by renaming the path segment `staging_xcm` to `xcm`.
This requires: https://github.com/paritytech/scale-info/pull/197
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
* Fix std, runtime-benchmarks and try-runtime features
zepter lint propagate-feature --feature try-runtime --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="try-runtime:frame-try-runtime"
zepter lint propagate-feature --feature runtime-benchmarks --left-side-feature-missing=ignore --workspace --fix --feature-enables-dep="runtime-benchmarks:frame-benchmarking"
zepter lint propagate-feature --feature std --left-side-feature-missing=ignore --workspace --fix
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add propagate feature CI check
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Test CI by adding an error
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Use --locked
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add help msg
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert "Test CI by adding an error"
This reverts commit cf4ff6cc0632269b0a109e547686e5e3314b02de.
* Test CI by adding an error
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* No newline in help msg
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert "Test CI by adding an error"
This reverts commit 5daa06ada8e01f5bebafb9d1c76804dd79bc1006.
* Test CI by adding an error
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert "Test CI by adding an error"
This reverts commit ca15de5729507a564f140a10ec2e87b19516ec4c.
* Fix msg
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert back to master
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Re-do with Zepter v0.7.4
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update Zepter to 0.7.4
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Disable rococo try-runtime check
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* More review fixes
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* wip
* remove index in lieu of nonce
* wip
* remove accountnonce in lieu of nonce
* add minor improvement
* rebase and merge conflicts
Branislav Kontur