80616f6d03
Integrate litep2p into Polkadot SDK ( #2944 )
...
[litep2p](https://github.com/altonen/litep2p ) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.
Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.
I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`--out-peers 200`), networking CPU
usage goes down from ~110% to ~30% (80 pp) and for normal load
(`--out-peers 40`), the usage goes down from ~55% to ~18% (37 pp).
These should not be taken as final numbers because:
a) there are still some low-hanging optimization fruits, such as
enabling [receive window
auto-tuning](https://github.com/libp2p/rust-yamux/pull/176 ), integrating
`Peerset` more closely with `litep2p` or improving memory usage of the
WebSocket transport
b) fixing bugs/instabilities that incorrectly cause `litep2p` to do less
work will increase the networking CPU usage
c) verification in a more diverse set of tests/conditions is needed
Nevertheless, these numbers should give an early estimate for CPU usage
of the new networking backend.
This PR consists of three separate changes:
* introduce a generic `PeerId` (wrapper around `Multihash`) so that we
don't have use `NetworkService::PeerId` in every part of the code that
uses a `PeerId`
* introduce `NetworkBackend` trait, implement it for the libp2p network
stack and make Polkadot SDK generic over `NetworkBackend`
* implement `NetworkBackend` for litep2p
The new library should be considered experimental which is why
`rust-libp2p` will remain as the default option for the time being. This
PR currently depends on the master branch of `litep2p` but I'll cut a
new release for the library once all review comments have been
addresses.
---------
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io >
Co-authored-by: Dmitry Markin <dmitry@markin.tech >
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com >
Co-authored-by: Alexandru Vasile <alexandru.vasile@parity.io >
2024-04-08 16:44:13 +00:00
8e95a3e1aa
Align dependencies with parity-bridges-common ( #3937 )
...
Working towards migrating the `parity-bridges-common` repo inside
`polkadot-sdk`. This PR upgrades some dependencies in order to align
them with the versions used in `parity-bridges-common`
Related to
https://github.com/paritytech/parity-bridges-common/issues/2538
2024-04-02 13:41:01 +00:00
e89d0fca35
Lift dependencies to the workspace (Part 2/x) ( #3366 )
...
Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.
```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"
# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix
# And format the changes:
$ taplo format --config .config/taplo.toml
```
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io >
2024-02-20 14:28:05 +00:00
e80c24733f
Lift dependencies to the workspace (Part 1) ( #2070 )
...
Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994 ):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace
Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.
I am using a tool to do this, so its mostly a test to see that it works
as expected.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io >
2024-02-12 11:19:20 +00:00
3717ec3802
Sync Cargo.toml and crates.io versions ( #3034 )
...
Related https://github.com/paritytech/polkadot-sdk/issues/3032
---
Using https://github.com/liamaharon/cargo-workspace-version-tools/
`cargo run -- sync --path ../polkadot-sdk`
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io >
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io >
2024-01-26 18:14:03 +00:00
ccd55552a8
Bump parking_lot from 0.11.2 to 0.12.1 ( #2901 )
...
Bumps [parking_lot](https://github.com/Amanieu/parking_lot ) from 0.11.2
to 0.12.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/Amanieu/parking_lot/blob/master/CHANGELOG.md ">parking_lot's
changelog</a>.</em></p>
<blockquote>
<h2>parking_lot 0.12.1 (2022-05-31)</h2>
<ul>
<li>Fixed incorrect memory ordering in <code>RwLock</code>. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/344 ">#344</a>)</li>
<li>Added <code>Condvar::wait_while</code> convenience methods (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/343 ">#343</a>)</li>
</ul>
<h2>parking_lot_core 0.9.3 (2022-04-30)</h2>
<ul>
<li>Bump windows-sys dependency to 0.36. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/339 ">#339</a>)</li>
</ul>
<h2>parking_lot_core 0.9.2, lock_api 0.4.7 (2022-03-25)</h2>
<ul>
<li>Enable const new() on lock types on stable. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/325 ">#325</a>)</li>
<li>Added <code>MutexGuard::leak</code> function. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/333 ">#333</a>)</li>
<li>Bump windows-sys dependency to 0.34. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/331 ">#331</a>)</li>
<li>Bump petgraph dependency to 0.6. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/326 ">#326</a>)</li>
<li>Don't use pthread attributes on the espidf platform. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/319 ">#319</a>)</li>
</ul>
<h2>parking_lot_core 0.9.1 (2022-02-06)</h2>
<ul>
<li>Bump windows-sys dependency to 0.32. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/316 ">#316</a>)</li>
</ul>
<h2>parking_lot 0.12.0, parking_lot_core 0.9.0, lock_api 0.4.6
(2022-01-28)</h2>
<ul>
<li>The MSRV is bumped to 1.49.0.</li>
<li>Disabled eventual fairness on wasm32-unknown-unknown. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/302 ">#302</a>)</li>
<li>Added a rwlock method to report if lock is held exclusively. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/303 ">#303</a>)</li>
<li>Use new <code>asm!</code> macro. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/304 ">#304</a>)</li>
<li>Use windows-rs instead of winapi for faster builds. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/311 ">#311</a>)</li>
<li>Moved hardware lock elision support to a separate Cargo feature. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/313 ">#313</a>)</li>
<li>Removed used of deprecated <code>spin_loop_hint</code>. (<a
href="https://redirect.github.com/Amanieu/parking_lot/issues/314 ">#314</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/Amanieu/parking_lot/commit/336a9b31ff385728d00eb7ef173e4d054584b787 "><code>336a9b3</code></a>
Release parking_lot 0.12.1</li>
<li><a
href="https://github.com/Amanieu/parking_lot/commit/b69a0547ce6c92b164528c65daafa48e8f1c08bb "><code>b69a054</code></a>
Merge pull request <a
href="https://redirect.github.com/Amanieu/parking_lot/issues/343 ">#343</a>
from bryanhitc/master</li>
<li><a
href="https://github.com/Amanieu/parking_lot/commit/3fe7233ee05fbae9bc94a831d4e66df0257880a2 "><code>3fe7233</code></a>
Merge pull request <a
href="https://redirect.github.com/Amanieu/parking_lot/issues/344 ">#344</a>
from Amanieu/fix_rwlock_ordering</li>
<li><a
href="https://github.com/Amanieu/parking_lot/commit/ef12b00daf0dbc6dd025098ec2cd0517bb9f737c "><code>ef12b00</code></a>
small test update</li>
<li><a
href="https://github.com/Amanieu/parking_lot/commit/fdb063cd4e33d9c44cc08aea0c341ffec7e7b282 "><code>fdb063c</code></a>
wait_while can't timeout fix</li>
<li><a
href="https://github.com/Amanieu/parking_lot/commit/26e19dced4ae01000abc0dfca251f56695b1b8aa "><code>26e19dc</code></a>
Remove WaitWhileResult</li>
<li><a
href="https://github.com/Amanieu/parking_lot/commit/d26c284fe8413bdeeed3ef4f70e23b5919a9ffeb "><code>d26c284</code></a>
Fix incorrect memory ordering in RwLock</li>
<li><a
href="https://github.com/Amanieu/parking_lot/commit/045828381a5facff71b1aad3c01af15801959458 "><code>0458283</code></a>
Use saturating_add for WaitWhileResult</li>
<li><a
href="https://github.com/Amanieu/parking_lot/commit/686db4755913947219f83a04b21885032685d246 "><code>686db47</code></a>
Add Condvar::wait_while convenience methods</li>
<li><a
href="https://github.com/Amanieu/parking_lot/commit/6f6e021ced6f67fef8002442aa97c4a08ed5c3e4 "><code>6f6e021</code></a>
Merge pull request <a
href="https://redirect.github.com/Amanieu/parking_lot/issues/342 ">#342</a>
from MarijnS95/patch-1</li>
<li>Additional commits viewable in <a
href="https://github.com/Amanieu/parking_lot/compare/0.11.2...0.12.1 ">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores )
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions
</details>
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2024-01-10 11:07:29 +00:00
be8e626806
Set clippy lints in workspace (requires rust 1.74) ( #2390 )
...
We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com >
Co-authored-by: Branislav Kontur <bkontur@gmail.com >
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com >
2023-12-13 15:11:07 +01:00
711132c961
Bump thiserror from 1.0.47 to 1.0.48 ( #1396 )
...
Bumps [thiserror](https://github.com/dtolnay/thiserror ) from 1.0.47 to 1.0.48.
- [Release notes](https://github.com/dtolnay/thiserror/releases )
- [Commits](https://github.com/dtolnay/thiserror/compare/1.0.47...1.0.48 )
---
updated-dependencies:
- dependency-name: thiserror
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com >
2023-09-05 09:27:19 +02:00
dcda0e50f5
Fix build profiles ( #1229 )
...
* Fix build profiles
Closes https://github.com/paritytech/polkadot-sdk/issues/1155
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io >
* Manually set version to 1.0.0
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io >
* Use workspace repo
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io >
* 'Authors and Edition from workspace
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io >
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io >
2023-08-29 13:39:41 +02:00
f441a5fc93
Diener workspacify
...
Signed-off-by: alvicsam <alvicsam@gmail.com >
2023-08-25 11:05:17 +02:00
0142a01353
Add license to crates ( #7578 )
...
* Add license to crates
This is required to publish to crates.io
* Add more licenses
2023-08-04 18:33:05 +02:00
8eda0a039f
Bump parity-scale-codec to 3.6.1 ( #7382 )
2023-06-21 19:24:24 +09:00
95f0ca271e
Bump parity-scale-codec to v 3.4.0 ( #6945 )
2023-03-23 15:15:03 +00:00
36f014d3a9
Bump tokio from 1.24.1 to 1.24.2 ( #6671 )
...
Bumps [tokio](https://github.com/tokio-rs/tokio ) from 1.24.1 to 1.24.2.
- [Release notes](https://github.com/tokio-rs/tokio/releases )
- [Commits](https://github.com/tokio-rs/tokio/commits )
---
updated-dependencies:
- dependency-name: tokio
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2023-02-06 10:16:25 +01:00
1790d0ae36
Bump parity-scale-codec to 3.3.0 ( #6666 )
2023-02-03 14:03:38 +00:00
6fdaef92d5
Bump tokio from 1.22.0 to 1.24.1 ( #6523 )
...
Bumps [tokio](https://github.com/tokio-rs/tokio ) from 1.22.0 to 1.24.1.
- [Release notes](https://github.com/tokio-rs/tokio/releases )
- [Commits](https://github.com/tokio-rs/tokio/compare/tokio-1.22.0...tokio-1.24.1 )
---
updated-dependencies:
- dependency-name: tokio
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2023-01-09 12:05:11 +00:00
be403051dc
Set polkadot version in one place ( #6095 )
...
* rust 1.64 enables workspace properties
* add edition, repository and authors.
* of course, update the version in one place.
Co-authored-by: Andronik <write@reusable.software >
2022-12-05 11:36:16 +00:00
f2f5345ac2
Upgrade tokio to 1.22.0 ( #6262 )
...
Co-authored-by: Sebastian Kunert <skunert49@gmail.com >
2022-12-05 13:15:06 +03:00
b76086c617
sync versions with current release (0.9.33) ( #6363 )
...
* westend: update transaction version
* polkadot: update transaction version
* kusama: update transaction version
* Bump spec_version to 9330
* bump versions to 0.9.33
2022-11-30 10:32:20 +02:00
f8cc39a761
sync versions with current release (0.9.31) ( #6176 )
...
* Bump spec_version to 9310
* bump transaction_version (0.9.31) (#6171 )
* Bump transaction_version for polkadot
* Bump transaction_version for kusama
* Bump transaction_version for rococo
* Bump transaction_version for westend
* Bump transaction_version for polkadot
* Bump transaction_version for kusama
* Bump transaction_version for rococo
* Bump transaction_version for westend
* Bump crate versions (0.9.31)
2022-10-22 00:08:53 -04:00
1acc3fa150
Sync versions with current release (v0.9.29) ( #5982 )
...
* Bump transaction_version for westend
* Bump transaction_version for rococo
* Bump transaction_version for kusama
* Bump transaction_version for polkadot
* Bump spec_version to 9290
* Bump crate versions
2022-09-09 11:24:06 +00:00
fc97080cb2
version bumps (0.9.28) ( #5933 )
...
* Bump crate versions
* Bump spec_version to 9280 for kusama
* Bump spec_version to 9280 for polkadot
* Bump spec_version to 9280 for rococo
* Bump spec_version to 9280 for westend
* update Cargo.lock
Co-authored-by: parity-processbot <>
2022-08-29 18:01:58 +02:00
85dabbd850
Backport crate version bumps to 0.9.27 ( #5826 )
...
* Bump crate versions
* Update cargo.lock
2022-07-28 10:03:27 +00:00
9fc4e16eff
Version bump to v0.9.26/9260 ( #5755 )
...
* Bump spec_version to 9260
* Version bump to v0.9.26
2022-07-06 10:31:45 +00:00
09b10fa25e
Bump parity-scale-codec from 3.1.2 to 3.1.5 ( #5720 )
...
Bumps [parity-scale-codec](https://github.com/paritytech/parity-scale-codec ) from 3.1.2 to 3.1.5.
- [Release notes](https://github.com/paritytech/parity-scale-codec/releases )
- [Changelog](https://github.com/paritytech/parity-scale-codec/blob/master/CHANGELOG.md )
- [Commits](https://github.com/paritytech/parity-scale-codec/compare/parity-scale-codec-3.1.2...parity-scale-codec-3.1.5 )
---
updated-dependencies:
- dependency-name: parity-scale-codec
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-06-27 10:27:49 +00:00
97f9b840e4
bump versions to 0.9.25 ( #5684 )
...
* kusama: bump spec_version to 9250
* polkadot: bump spec_version to 9250
* rococo: bump spec_version to 9250
* westend: bump spec_version to 9250
* bump version to 0.9.25
* bump transaction version (polkadot & kusama) (#5690 )
* kusama: bump transaction_version to 12
* polkadot: bump transaction_version to 13
2022-06-21 13:02:04 +00:00
7eba8f2162
bump to 0.9.23 ( #5593 )
...
* bump version to 0.9.23
* bump spec_version to 9230
2022-05-27 10:18:23 +02:00
3b685fbf91
version bumps (0.9.22) ( #5495 )
...
* bump versions to 0.9.22
* bump spec_version to 9220
2022-05-16 13:24:24 +02:00
992705d127
Bump log from 0.4.16 to 0.4.17
...
Bumps [log](https://github.com/rust-lang/log ) from 0.4.16 to 0.4.17.
- [Release notes](https://github.com/rust-lang/log/releases )
- [Changelog](https://github.com/rust-lang/log/blob/master/CHANGELOG.md )
- [Commits](https://github.com/rust-lang/log/commits/0.4.17 )
---
updated-dependencies:
- dependency-name: log
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
2022-05-08 22:32:57 +02:00
bd5db20e7c
Bump thiserror from 1.0.30 to 1.0.31 ( #5439 )
...
Bumps [thiserror](https://github.com/dtolnay/thiserror ) from 1.0.30 to 1.0.31.
- [Release notes](https://github.com/dtolnay/thiserror/releases )
- [Commits](https://github.com/dtolnay/thiserror/compare/1.0.30...1.0.31 )
---
updated-dependencies:
- dependency-name: thiserror
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-05-04 13:53:53 +00:00
7ed275bff8
bump version to 0.9.19 ( #5290 )
2022-04-08 11:48:43 +00:00
d9f454f903
Bump log from 0.4.14 to 0.4.16 ( #5187 )
...
Bumps [log](https://github.com/rust-lang/log ) from 0.4.14 to 0.4.16.
- [Release notes](https://github.com/rust-lang/log/releases )
- [Changelog](https://github.com/rust-lang/log/blob/master/CHANGELOG.md )
- [Commits](https://github.com/rust-lang/log/commits )
---
updated-dependencies:
- dependency-name: log
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-03-30 13:23:27 +02:00
fbfcf3f066
Bump async-std from 1.10.0 to 1.11.0 ( #5186 )
...
Bumps [async-std](https://github.com/async-rs/async-std ) from 1.10.0 to 1.11.0.
- [Release notes](https://github.com/async-rs/async-std/releases )
- [Changelog](https://github.com/async-rs/async-std/blob/master/CHANGELOG.md )
- [Commits](https://github.com/async-rs/async-std/compare/v1.10.0...v1.11.0 )
---
updated-dependencies:
- dependency-name: async-std
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-03-23 11:16:30 +01:00
61a6004cf1
Bump parity-scale-codec from 3.1.0 to 3.1.2 ( #5153 )
...
Bumps [parity-scale-codec](https://github.com/paritytech/parity-scale-codec ) from 3.1.0 to 3.1.2.
- [Release notes](https://github.com/paritytech/parity-scale-codec/releases )
- [Changelog](https://github.com/paritytech/parity-scale-codec/blob/master/CHANGELOG.md )
- [Commits](https://github.com/paritytech/parity-scale-codec/commits )
---
updated-dependencies:
- dependency-name: parity-scale-codec
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-03-18 10:32:49 +00:00
d631f1dea8
observability: tracing gum, automatically cross ref traceID ( #5079 )
...
* add some gum
* bump expander
* gum
* fix all remaining issues
* last fixup
* Update node/gum/proc-macro/src/lib.rs
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com >
* change
* netowrk
* fixins
* chore
* allow optional fmt str + args, prep for expr as kv field
* tracing -> gum rename fallout
* restrict further
* allow multiple levels of field accesses
* another round of docs and a slip of the pen
* update ADR
* fixup lock fiel
* use target: instead of target=
* minors
* fix
* chore
* Update node/gum/README.md
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com >
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com >
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com >
2022-03-15 11:05:16 +00:00
3335ddc0da
Bump parity-scale-codec from 3.0.0 to 3.1.0 ( #5096 )
...
Bumps [parity-scale-codec](https://github.com/paritytech/parity-scale-codec ) from 3.0.0 to 3.1.0.
- [Release notes](https://github.com/paritytech/parity-scale-codec/releases )
- [Changelog](https://github.com/paritytech/parity-scale-codec/blob/master/CHANGELOG.md )
- [Commits](https://github.com/paritytech/parity-scale-codec/compare/v3.0...parity-scale-codec-v3.1.0 )
---
updated-dependencies:
- dependency-name: parity-scale-codec
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-03-14 19:34:46 +01:00
6fc2da146f
Bump all spec version to 9180 and versions to 0.9.18 ( #5083 )
...
* bump all spec version to 9180 and versions to 0.9.18
* all to 0.9.18
* lock update
2022-03-11 10:19:47 +01:00
9369dd3384
update mick jaeger and add some sanity unit tests ( #5067 )
...
* test: verify identifier generation is correct in jaeger
* bump mick jaeger to 0.1.8
Fixes the trace endianness issue.
* more docs, extra traceID field for CandidateHash as extra tag
* chore: spellcheck
* fix assert statement
2022-03-10 17:25:54 +00:00
e8cb6cdaac
Companion to "Updating scale to v3" ( #4958 )
...
* Updating dependencies
* Adapting code to scale v3
* Upgrade bitvec to 1.0.0
* Fix bitvec arithmetics
* Update Cargo.lock
* Update sp-io
* Fixing the build
* Yanked scale-info 2.0.0
Co-authored-by: Bastian Köcher <info@kchr.de >
2022-02-25 13:07:06 +01:00
d9d53c17a1
Switch to edition 2021 ( #4976 )
...
* Switch to edition 2021
* Reset bridges
* Fix compilation
* Fix test-runtime
* Fix malus
2022-02-24 10:20:58 +00:00
167df32561
Bump version ( #4904 )
...
* Bump spec_version
* Bump version to 0.9.17
2022-02-11 20:43:39 +01:00
ca81c0b50f
Bump parking_lot from 0.11.2 to 0.12.0 ( #4890 )
...
Bumps [parking_lot](https://github.com/Amanieu/parking_lot ) from 0.11.2 to 0.12.0.
- [Release notes](https://github.com/Amanieu/parking_lot/releases )
- [Changelog](https://github.com/Amanieu/parking_lot/blob/master/CHANGELOG.md )
- [Commits](https://github.com/Amanieu/parking_lot/compare/0.11.2...0.12.0 )
---
updated-dependencies:
- dependency-name: parking_lot
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2022-02-11 10:10:20 +00:00
7e9a58fc99
Version bumps to v0.9.16 and 9160 ( #4767 )
...
* Bump spec_version
* Bump version to 0.9.16
2022-02-02 15:22:32 +01:00
26f3da058d
Bump mick-jaeger from 0.1.6 to 0.1.7 ( #4538 )
...
Bumps [mick-jaeger](https://github.com/tomaka/mick-jaeger ) from 0.1.6 to 0.1.7.
- [Release notes](https://github.com/tomaka/mick-jaeger/releases )
- [Commits](https://github.com/tomaka/mick-jaeger/commits )
---
updated-dependencies:
- dependency-name: mick-jaeger
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-12-16 11:54:27 +01:00
08b8929c32
bump versions ( #4285 )
2021-11-15 14:05:12 +01:00
51e884a064
Bump mick-jaeger from 0.1.4 to 0.1.6 ( #4249 )
...
Bumps [mick-jaeger](https://github.com/tomaka/mick-jaeger ) from 0.1.4 to 0.1.6.
- [Release notes](https://github.com/tomaka/mick-jaeger/releases )
- [Commits](https://github.com/tomaka/mick-jaeger/commits )
---
updated-dependencies:
- dependency-name: mick-jaeger
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-11-10 09:05:10 +01:00
5f00ecbff2
Bump version to v0.9.12 ( #4089 )
...
* bump version
* update Cargo.lock
Co-authored-by: Andronik Ordian <write@reusable.software >
2021-10-15 16:28:20 +02:00
e017422166
Bump thiserror from 1.0.29 to 1.0.30 ( #4048 )
...
Bumps [thiserror](https://github.com/dtolnay/thiserror ) from 1.0.29 to 1.0.30.
- [Release notes](https://github.com/dtolnay/thiserror/releases )
- [Commits](https://github.com/dtolnay/thiserror/compare/1.0.29...1.0.30 )
---
updated-dependencies:
- dependency-name: thiserror
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-10-11 10:17:23 +00:00
72eab56e88
Bump version, tx_version and spec_version in prep for v0.9.11 ( #3970 )
...
* bump version and spec_version
* bump transaction version
* Bump of the default value in CI
* bump tx version for westend and kusama
Co-authored-by: Wilfried Kopp <wilfried@parity.io >
2021-09-30 14:44:19 +02:00
c0719034a1
Bump parity-scale-codec from 2.3.0 to 2.3.1 ( #3959 )
...
Bumps [parity-scale-codec](https://github.com/paritytech/parity-scale-codec ) from 2.3.0 to 2.3.1.
- [Release notes](https://github.com/paritytech/parity-scale-codec/releases )
- [Changelog](https://github.com/paritytech/parity-scale-codec/blob/master/CHANGELOG.md )
- [Commits](https://github.com/paritytech/parity-scale-codec/compare/parity-scale-codec-v2.3.0...parity-scale-codec-v2.3.1 )
---
updated-dependencies:
- dependency-name: parity-scale-codec
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-09-29 11:57:24 +02:00
Aaro Altonen