155 Commits

Author	SHA1	Message	Date
Aaro Altonen	80616f6d03	Integrate litep2p into Polkadot SDK (#2944) ... [litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P networking library. It supports all of the features of `rust-libp2p` that are currently being utilized by Polkadot SDK. Compared to `rust-libp2p`, `litep2p` has a quite different architecture which is why the new `litep2p` network backend is only able to use a little of the existing code in `sc-network`. The design has been mainly influenced by how we'd wish to structure our networking-related code in Polkadot SDK: independent higher-levels protocols directly communicating with the network over links that support bidirectional backpressure. A good example would be `NotificationHandle`/`RequestResponseHandle` abstractions which allow, e.g., `SyncingEngine` to directly communicate with peers to announce/request blocks. I've tried running `polkadot --network-backend litep2p` with a few different peer configurations and there is a noticeable reduction in networking CPU usage. For high load (`--out-peers 200`), networking CPU usage goes down from ~110% to ~30% (80 pp) and for normal load (`--out-peers 40`), the usage goes down from ~55% to ~18% (37 pp). These should not be taken as final numbers because: a) there are still some low-hanging optimization fruits, such as enabling [receive window auto-tuning](https://github.com/libp2p/rust-yamux/pull/176), integrating `Peerset` more closely with `litep2p` or improving memory usage of the WebSocket transport b) fixing bugs/instabilities that incorrectly cause `litep2p` to do less work will increase the networking CPU usage c) verification in a more diverse set of tests/conditions is needed Nevertheless, these numbers should give an early estimate for CPU usage of the new networking backend. This PR consists of three separate changes: * introduce a generic `PeerId` (wrapper around `Multihash`) so that we don't have use `NetworkService::PeerId` in every part of the code that uses a `PeerId` * introduce `NetworkBackend` trait, implement it for the libp2p network stack and make Polkadot SDK generic over `NetworkBackend` * implement `NetworkBackend` for litep2p The new library should be considered experimental which is why `rust-libp2p` will remain as the default option for the time being. This PR currently depends on the master branch of `litep2p` but I'll cut a new release for the library once all review comments have been addresses. --------- Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io> Co-authored-by: Dmitry Markin <dmitry@markin.tech> Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com> Co-authored-by: Alexandru Vasile <alexandru.vasile@parity.io>	2024-04-08 16:44:13 +00:00
Serban Iorga	8e95a3e1aa	Align dependencies with parity-bridges-common (#3937) ... Working towards migrating the `parity-bridges-common` repo inside `polkadot-sdk`. This PR upgrades some dependencies in order to align them with the versions used in `parity-bridges-common` Related to https://github.com/paritytech/parity-bridges-common/issues/2538	2024-04-02 13:41:01 +00:00
Dcompoze	002d9260f9	Fix spelling mistakes across the whole repository (#3808) ... **Update:** Pushed additional changes based on the review comments. **This pull request fixes various spelling mistakes in this repository.** Most of the changes are contained in the first **3** commits: - `Fix spelling mistakes in comments and docs` - `Fix spelling mistakes in test names` - `Fix spelling mistakes in error messages, panic messages, logs and tracing` Other source code spelling mistakes are separated into individual commits for easier reviewing: - `Fix the spelling of 'authority'` - `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'` - `Fix the spelling of 'prev_enqueud_messages'` - `Fix the spelling of 'endpoint'` - `Fix the spelling of 'children'` - `Fix the spelling of 'PenpalSiblingSovereignAccount'` - `Fix the spelling of 'PenpalSudoAccount'` - `Fix the spelling of 'insufficient'` - `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'` - `Fix the spelling of 'subtracted'` - `Fix the spelling of 'CandidatePendingAvailability'` - `Fix the spelling of 'exclusive'` - `Fix the spelling of 'until'` - `Fix the spelling of 'discriminator'` - `Fix the spelling of 'nonexistent'` - `Fix the spelling of 'subsystem'` - `Fix the spelling of 'indices'` - `Fix the spelling of 'committed'` - `Fix the spelling of 'topology'` - `Fix the spelling of 'response'` - `Fix the spelling of 'beneficiary'` - `Fix the spelling of 'formatted'` - `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'` - `Fix the spelling of 'succeeded'` - `Fix the spelling of 'reopened'` - `Fix the spelling of 'proposer'` - `Fix the spelling of 'InstantiationNonce'` - `Fix the spelling of 'depositor'` - `Fix the spelling of 'expiration'` - `Fix the spelling of 'phantom'` - `Fix the spelling of 'AggregatedKeyValue'` - `Fix the spelling of 'randomness'` - `Fix the spelling of 'defendant'` - `Fix the spelling of 'AquaticMammal'` - `Fix the spelling of 'transactions'` - `Fix the spelling of 'PassingTracingSubscriber'` - `Fix the spelling of 'TxSignaturePayload'` - `Fix the spelling of 'versioning'` - `Fix the spelling of 'descendant'` - `Fix the spelling of 'overridden'` - `Fix the spelling of 'network'` Let me know if this structure is adequate. **Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`, `Merkelization`, `Merkleization`, is somewhat inconsistent but I left it as it is. ~~**Note:** In some places the term `Receival` is used to refer to message reception, IMO `Reception` is the correct word here, but I left it as it is.~~ ~~**Note:** In some places the term `Overlayed` is used instead of the more acceptable version `Overlaid` but I also left it as it is.~~ ~~**Note:** In some places the term `Applyable` is used instead of the correct version `Applicable` but I also left it as it is.~~ **Note:** Some usage of British vs American english e.g. `judgement` vs `judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc. are both present in different places, but I suppose that's understandable given the number of contributors. ~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it triggers errors in CI when I make changes to it, so I left it as it is.~~	2024-03-26 13:57:57 +00:00
Oliver Tale-Yazdi	e89d0fca35	Lift dependencies to the workspace (Part 2/x) (#3366) ... Lifting some more dependencies to the workspace. Just using the most-often updated ones for now. It can be reproduced locally. ```sh # First you can check if there would be semver incompatible bumps (looks good in this case): $ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*" # Then apply the changes: $ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix # And format the changes: $ taplo format --config .config/taplo.toml ``` --------- Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>	2024-02-20 14:28:05 +00:00
dependabot[bot]	4b484e6a84	Bump the known_good_semver group with 6 updates (#3347) ... Bumps the known_good_semver group with 6 updates: | Package | From | To | | --- | --- | --- | | [serde](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` | | [serde_json](https://github.com/serde-rs/json) | `1.0.111` | `1.0.113` | | [clap](https://github.com/clap-rs/clap) | `4.4.18` | `4.5.0` | | [syn](https://github.com/dtolnay/syn) | `2.0.48` | `2.0.49` | | [serde_yaml](https://github.com/dtolnay/serde-yaml) | `0.9.30` | `0.9.31` | | [serde_derive](https://github.com/serde-rs/serde) | `1.0.195` | `1.0.196` | Updates `serde` from 1.0.195 to 1.0.196 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.196</h2> <ul> <li>Improve formatting of &quot;invalid type&quot; error messages involving floats (<a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a> Release 1.0.196</li> <li><a href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a> from dtolnay/decimalpoint</li> <li><a href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a> Format Unexpected::Float with decimal point</li> <li><a href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a> from dtolnay/workspacedeps</li> <li><a href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a> Fix workspace.dependencies default-features future compat warning</li> <li><a href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a> Sort workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a> from rodoufu/workspaceDependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a> Adding workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a> from Sky9x/msrv-badge</li> <li><a href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a> Use shields.io's MSRV badges</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.111 to 1.0.113 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.113</h2> <ul> <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods on Map (<a href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a>)</li> </ul> <h2>v1.0.112</h2> <ul> <li>Improve formatting of &quot;invalid type&quot; error messages involving floats (<a href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/09d865b34b9701be52764dc9bf571b1a16e9d3dc"><code>09d865b</code></a> Release 1.0.113</li> <li><a href="https://github.com/serde-rs/json/commit/5aeab4eaf69d7959f013f8081865c264d6c00551"><code>5aeab4e</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1109">#1109</a> from serde-rs/remove</li> <li><a href="https://github.com/serde-rs/json/commit/ca3c2ca3696cab79b8b279be7569ee1647250f1e"><code>ca3c2ca</code></a> Add swap_remove and shift_remove methods on Map</li> <li><a href="https://github.com/serde-rs/json/commit/7fece969e3b480ec620419d65c2aeb08776bebcb"><code>7fece96</code></a> Release 1.0.112</li> <li><a href="https://github.com/serde-rs/json/commit/6a6d2bbd9e8b8bd72573b863f12a4ec991f33232"><code>6a6d2bb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1107">#1107</a> from serde-rs/unexpectedfloat</li> <li><a href="https://github.com/serde-rs/json/commit/83d7bad54ba5db3a44198d6df0ff2e81621683fa"><code>83d7bad</code></a> Format f64 in error messages using ryu</li> <li><a href="https://github.com/serde-rs/json/commit/107c2d1c42817f0d71f07a4d5b0ea2f29dbce8b8"><code>107c2d1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1106">#1106</a> from serde-rs/invalidvalue</li> <li><a href="https://github.com/serde-rs/json/commit/62ca3e4c01c2e62cd5c2a32e9104f386e5ce7808"><code>62ca3e4</code></a> Handle Unexpected::Unit in Error::invalid_value</li> <li><a href="https://github.com/serde-rs/json/commit/296fafb8f32e8442ef8e4d5725c15ffca726b288"><code>296fafb</code></a> Factor out JSON-specific Display impl for serde::de::Unexpected</li> <li><a href="https://github.com/serde-rs/json/commit/e56cc696bd7c112e5dd4ccfa23d094c3a1c1c1ff"><code>e56cc69</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1105">#1105</a> from keienWang/master</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.111...v1.0.113">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.18 to 4.5.0 <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.5.0] - 2024-02-08</h2> <h3>Compatibility</h3> <ul> <li>Update MSRV to 1.74</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/a751c5fe65cd33cb09e85ff3039b4fd0182cdb6e"><code>a751c5f</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/9ec6c942b81c370a8c14652e42295933244555ac"><code>9ec6c94</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/0735119775c2d27fef6b3c232cb9ef2fcbbd963f"><code>0735119</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/c4d3959506f5068f86ffb7ab34b622bd2da40dd8"><code>c4d3959</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5344">#5344</a> from epage/encode</li> <li><a href="https://github.com/clap-rs/clap/commit/f750e577789e1dd34c6950d8c8fe16d1bfd1f49c"><code>f750e57</code></a> fix(lex): Use new-ish OsStr API</li> <li><a href="https://github.com/clap-rs/clap/commit/1d9a554cdfddffcb92d197706b9720e2760cb443"><code>1d9a554</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5343">#5343</a> from epage/msrv</li> <li><a href="https://github.com/clap-rs/clap/commit/4b45d361b1b96eb1f37b7d1db2684203ca828a94"><code>4b45d36</code></a> chore: Update MSRV to 1.74</li> <li><a href="https://github.com/clap-rs/clap/commit/55b1f945157d4d0e480dea6c492e04d0b541088a"><code>55b1f94</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5342">#5342</a> from epage/divan</li> <li><a href="https://github.com/clap-rs/clap/commit/ea77b98da3f321069ae136a241a2d266c2b28bd7"><code>ea77b98</code></a> test(complete): Make it order independent</li> <li><a href="https://github.com/clap-rs/clap/commit/b0fea2bac60819bdb042e10c032817fded67f815"><code>b0fea2b</code></a> test(bench): Switch to divan</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.18...clap_complete-v4.5.0">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.48 to 2.0.49 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.49</h2> <ul> <li>Improve error location when parsing from an empty string literal using <code>LitStr::parse</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/e64c0636042bcd8cf56f9e6c3e828a49cb434649"><code>e64c063</code></a> Release 2.0.49</li> <li><a href="https://github.com/dtolnay/syn/commit/981359c5f46f25f3db42d1b341cc607f634688e7"><code>981359c</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1590">#1590</a> from dtolnay/streof</li> <li><a href="https://github.com/dtolnay/syn/commit/51298d40a447b9e5b3cd8c898c2ea9d24b31cd6d"><code>51298d4</code></a> Improve error location at eof in LitStr::parse</li> <li><a href="https://github.com/dtolnay/syn/commit/270c63384a9d891f65880a03a5a92f0bf4605bbf"><code>270c633</code></a> Update test suite to nightly-2024-02-13</li> <li><a href="https://github.com/dtolnay/syn/commit/dc9cf16b9b0601d2d393d059c46a8f8e0220cc21"><code>dc9cf16</code></a> Remove FilterAttrs trait when unused</li> <li><a href="https://github.com/dtolnay/syn/commit/7dcfac79eda716fa806d68cc0aa811f3be717dc0"><code>7dcfac7</code></a> Ignore dead_code warning in test</li> <li><a href="https://github.com/dtolnay/syn/commit/98318441089f9a9bb596fc010ed14c3b593d4bda"><code>9831844</code></a> Update signature of Emitter::emit_diagnostic in nightly-2024-02-07</li> <li><a href="https://github.com/dtolnay/syn/commit/9e8033f63da93dfb6a3e698449c6edff5e56727d"><code>9e8033f</code></a> Update test suite to nightly-2024-02-07</li> <li><a href="https://github.com/dtolnay/syn/commit/cb3348cd94be50995054796facdfa055b6e0e9e8"><code>cb3348c</code></a> Update test suite to nightly-2024-01-23</li> <li><a href="https://github.com/dtolnay/syn/commit/15b9dbcd67bc56f3da7d33bbede46f7380fc7164"><code>15b9dbc</code></a> Update test suite to nightly-2024-01-19</li> <li>Additional commits viewable in <a href="https://github.com/dtolnay/syn/compare/2.0.48...2.0.49">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.30 to 0.9.31 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.31</h2> <ul> <li>Add <code>swap_remove</code> and <code>shift_remove</code> methods on Mapping (<a href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/2a77483b23897115bdd69af32ae34d593268d555"><code>2a77483</code></a> Release 0.9.31</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/d8d1a839cf42ef4627c66bebd743f5fecd24e3ed"><code>d8d1a83</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/408">#408</a> from dtolnay/remove</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/f8a99a496836ccfa6c547af9136986d13011be98"><code>f8a99a4</code></a> Add swap_remove and shift_remove methods on Mapping</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/8b26413e3307e39329dc68a96b065058aec38f9a"><code>8b26413</code></a> Work around dead_code warning in tests</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.30...0.9.31">compare view</a></li> </ul> </details> <br /> Updates `serde_derive` from 1.0.195 to 1.0.196 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde_derive's releases</a>.</em></p> <blockquote> <h2>v1.0.196</h2> <ul> <li>Improve formatting of &quot;invalid type&quot; error messages involving floats (<a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/ede9762a583c3cc3b87c10a53551828fad339525"><code>ede9762</code></a> Release 1.0.196</li> <li><a href="https://github.com/serde-rs/serde/commit/d438c2d67bf30e3edab31c2272c4829c12cf4cb5"><code>d438c2d</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2682">#2682</a> from dtolnay/decimalpoint</li> <li><a href="https://github.com/serde-rs/serde/commit/bef110b92a171ac568a47339f5bd97938a8c9da2"><code>bef110b</code></a> Format Unexpected::Float with decimal point</li> <li><a href="https://github.com/serde-rs/serde/commit/b971ef11d1b53da7673e0c8199e87509c003c1a8"><code>b971ef1</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2681">#2681</a> from dtolnay/workspacedeps</li> <li><a href="https://github.com/serde-rs/serde/commit/29d9f693996d199748136d5561a971ed68626724"><code>29d9f69</code></a> Fix workspace.dependencies default-features future compat warning</li> <li><a href="https://github.com/serde-rs/serde/commit/aecb4083bde754155752f5d7d442b64eb7dc636f"><code>aecb408</code></a> Sort workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/1c675ab3a38e46df4e62465800970f8b20a2055d"><code>1c675ab</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2678">#2678</a> from rodoufu/workspaceDependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/dd619630a337139424725697ccd9a9f7596a2d3a"><code>dd61963</code></a> Adding workspace dependencies</li> <li><a href="https://github.com/serde-rs/serde/commit/111803ab0768d010c606f2fc0d0add12750d5eef"><code>111803a</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2673">#2673</a> from Sky9x/msrv-badge</li> <li><a href="https://github.com/serde-rs/serde/commit/0024f74f34fbbdc44a7b22457faebe36c5cbe7f8"><code>0024f74</code></a> Use shields.io's MSRV badges</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.195...v1.0.196">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2024-02-16 11:47:28 +00:00
Oliver Tale-Yazdi	e80c24733f	Lift dependencies to the workspace (Part 1) (#2070) ... Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994): - Set log to `0.4.20` everywhere - Lift `log` to the workspace Starting with a simpler one after seeing https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw. This sets the `default-features` to `false` in the root and then overwrites that in each create to its original value. This is necessary since otherwise the `default` features are additive and its impossible to disable them in the crate again once they are enabled in the workspace. I am using a tool to do this, so its mostly a test to see that it works as expected. --------- Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>	2024-02-12 11:19:20 +00:00
Liam Aharon	3717ec3802	Sync Cargo.toml and crates.io versions (#3034) ... Related https://github.com/paritytech/polkadot-sdk/issues/3032 --- Using https://github.com/liamaharon/cargo-workspace-version-tools/ `cargo run -- sync --path ../polkadot-sdk` --------- Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io> Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>	2024-01-26 18:14:03 +00:00
dependabot[bot]	204fe7ffd7	Bump the known_good_semver group with 4 updates (#2865) ... Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [syn](https://github.com/dtolnay/syn). Updates `serde` from 1.0.194 to 1.0.195 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.195</h2> <ul> <li>Prevent remote definitions of tuple struct or tuple variant from triggering dead_code warning (<a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/03eec42c3313b36da416be1486e9ecac345784d5"><code>03eec42</code></a> Release 1.0.195</li> <li><a href="https://github.com/serde-rs/serde/commit/196f311ae2fd8ad94fe38a57830419859a4d3dbb"><code>196f311</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2671">#2671</a> from dtolnay/deadremote</li> <li><a href="https://github.com/serde-rs/serde/commit/38d9e0b2091e9b6150486c2c37367819b86bcc39"><code>38d9e0b</code></a> Revert &quot;Add FIXME to fix dead_code warning when using serde(remote)&quot;</li> <li><a href="https://github.com/serde-rs/serde/commit/6502b3131697eff6420786ad71f87f29cfff3a13"><code>6502b31</code></a> Fix new dead_code warning in tuple struct and tuple variant remote defs</li> <li><a href="https://github.com/serde-rs/serde/commit/6f1a8c3115c8d2502178c25d610fbaee2e82c46b"><code>6f1a8c3</code></a> Add FIXME to fix dead_code warning when using serde(remote)</li> <li><a href="https://github.com/serde-rs/serde/commit/d883c94cc9fe72d0512dc7f4def7191a401595c9"><code>d883c94</code></a> Work around dead_code warning in tests</li> <li><a href="https://github.com/serde-rs/serde/commit/961fa59a7469c5b5e323b9723323df412048d60d"><code>961fa59</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2670">#2670</a> from serde-rs/exhaustive</li> <li><a href="https://github.com/serde-rs/serde/commit/8bc71def551df190e6817d3311e5c76f751f53e6"><code>8bc71de</code></a> Fill in omitted patterns for GenericArguments match</li> <li><a href="https://github.com/serde-rs/serde/commit/7c65a9dc0eab2d4d829b258a7b3549351bbe8dcd"><code>7c65a9d</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.194...v1.0.195">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.110 to 1.0.111 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.111</h2> <ul> <li>Improve floating point parsing performance on loongarch64 (<a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a>, thanks <a href="https://github.com/heiher"><code>@​heiher</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/0131ac68212e8094bd14ee618587d731b4f9a68b"><code>0131ac6</code></a> Release 1.0.111</li> <li><a href="https://github.com/serde-rs/json/commit/96ecfadd3f7dd6366a2d07a098e228d15df93cb4"><code>96ecfad</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1100">#1100</a> from heiher/limb-64-la64</li> <li><a href="https://github.com/serde-rs/json/commit/c80dbaf8ff5902ca670e0a48bbe495065b9314f5"><code>c80dbaf</code></a> Set limb width to 64 for loongarch64</li> <li>See full diff in <a href="https://github.com/serde-rs/json/compare/v1.0.110...v1.0.111">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.12 to 4.4.13 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.13</h2> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.13] - 2024-01-04</h2> <h3>Documentation</h3> <ul> <li>Fix link to structopt migration guide</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/2ab48b295c2463ce8c141a9868095b811ccf3b99"><code>2ab48b2</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/7a06a8cd619db704c6d826bf752eae3b86ce23a8"><code>7a06a8c</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/cca190efedf40f48147a3a4a777a9cc17728abdf"><code>cca190e</code></a> docs: Correct link to StructOpt migration guide</li> <li><a href="https://github.com/clap-rs/clap/commit/5c31f453c1a9f46109db8e0a47ed212748c0556c"><code>5c31f45</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5281">#5281</a> from Manishearth/safety-docs</li> <li><a href="https://github.com/clap-rs/clap/commit/ddae7e6f411c4c87294212152b8d9beea16637e7"><code>ddae7e6</code></a> Correct safety docs</li> <li><a href="https://github.com/clap-rs/clap/commit/48d28aa689bfd0fb44ec025244b30ba261e2515a"><code>48d28aa</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/748ce18cc2ccc3f7c07fa8b7c5b6f90ed9242b72"><code>748ce18</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/adbe6ec4cb6a617070c41927a389d0bea7b30936"><code>adbe6ec</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5278">#5278</a> from henry-hsieh/fix-nosort</li> <li><a href="https://github.com/clap-rs/clap/commit/2b48858ba84c62e9af97bee4734d70530254cd8a"><code>2b48858</code></a> fix: Skip nosort option below bash 4.4</li> <li><a href="https://github.com/clap-rs/clap/commit/777b744102cde324dc75534ef043efc15a9f40be"><code>777b744</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5277">#5277</a> from clap-rs/renovate/actions-setup-python-5.x</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.12...v4.4.13">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.47 to 2.0.48 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.48</h2> <ul> <li>Improve error message on unexpected token after <code>else</code> (<a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/5e16fc24e68b16a381cb7ef22455dba9db143083"><code>5e16fc2</code></a> Release 2.0.48</li> <li><a href="https://github.com/dtolnay/syn/commit/dc40084b15ab4a443179fc39cbadac6452408838"><code>dc40084</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1578">#1578</a> from dtolnay/elseblock</li> <li><a href="https://github.com/dtolnay/syn/commit/82fcefce69d36e78301936c5af91f005d6a24357"><code>82fcefc</code></a> Fix error message on unexpected token after 'else'</li> <li><a href="https://github.com/dtolnay/syn/commit/e8a5c68ad45194e575a923f6b1e08f1817196331"><code>e8a5c68</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1576">#1576</a> from dtolnay/exhaustive</li> <li><a href="https://github.com/dtolnay/syn/commit/97b1df6d935cb4801f4090782304577c8574d024"><code>97b1df6</code></a> Pick up changes to non_exhaustive_omitted_patterns lint</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.47...2.0.48">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2024-01-07 11:42:37 +01:00
dependabot[bot]	88e7b49c1d	Bump the known_good_semver group with 4 updates (#2845) ... Bumps the known_good_semver group with 4 updates: [serde](https://github.com/serde-rs/serde), [serde_json](https://github.com/serde-rs/json), [clap](https://github.com/clap-rs/clap) and [serde_yaml](https://github.com/dtolnay/serde-yaml). Updates `serde` from 1.0.193 to 1.0.194 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.194</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/d2d977a6c6dcff237ae956336d18b0c900c61aad"><code>d2d977a</code></a> Release 1.0.194</li> <li><a href="https://github.com/serde-rs/serde/commit/a9a6ee9d7f2e3a3306ad7c7a8f21dcf369c6acb7"><code>a9a6ee9</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/serde/commit/28c5d215c11b66368b725f04cb92e49e4350bcdc"><code>28c5d21</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2669">#2669</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/serde-rs/serde/commit/3d6a789562579fb7ea783e0d7f35530914d8baca"><code>3d6a789</code></a> Remove option_if_let_else clippy suppression</li> <li><a href="https://github.com/serde-rs/serde/commit/a0e68698e33fa928f1d9f208d68b17df9f8bb568"><code>a0e6869</code></a> Work around doc_link_with_quotes pedantic clippy lint</li> <li>See full diff in <a href="https://github.com/serde-rs/serde/compare/v1.0.193...v1.0.194">compare view</a></li> </ul> </details> <br /> Updates `serde_json` from 1.0.108 to 1.0.110 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.109</h2> <ul> <li>Documentation improvements</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/df5cf215b70fb6341b255e7c0a210c06f64c0669"><code>df5cf21</code></a> Release 1.0.110</li> <li><a href="https://github.com/serde-rs/json/commit/c35856a93c37b48b3d6efc4fec8e05554dd3f9d5"><code>c35856a</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/serde-rs/json/commit/f88bf1fccb05aa4de129675de44eb6aaf3fec0a0"><code>f88bf1f</code></a> Release 1.0.109</li> <li><a href="https://github.com/serde-rs/json/commit/bb62c73ecef901e689b0a7a67ed613a32975520c"><code>bb62c73</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1097">#1097</a> from serde-rs/doccfg</li> <li><a href="https://github.com/serde-rs/json/commit/df36d109fd9f9cdd22a874c0177cafec12237f95"><code>df36d10</code></a> Restore doc cfg on re-exports</li> <li><a href="https://github.com/serde-rs/json/commit/c3670913423329c166add9d85ecdfc3e3da21e7a"><code>c367091</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1095">#1095</a> from dtolnay/hashtest</li> <li><a href="https://github.com/serde-rs/json/commit/b328ee7df4dd772922f084600aa7cea39218b694"><code>b328ee7</code></a> Eliminate hash closure in favor of calling hash_one directly</li> <li><a href="https://github.com/serde-rs/json/commit/b9bcbad3c094042f79f1a45189ec0edbb8f9f322"><code>b9bcbad</code></a> Use BuildHasher::hash_one</li> <li><a href="https://github.com/serde-rs/json/commit/7ff6c9e30c2ecc2cdcf089ed86c7ccfe7a41721c"><code>7ff6c9e</code></a> Use random hasher state for number hashing test</li> <li><a href="https://github.com/serde-rs/json/commit/fe031cd1de4dde5b47e0f18934632b41bd18b48d"><code>fe031cd</code></a> Delete trace_macros! functionality from test</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.108...v1.0.110">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.11 to 4.4.12 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.12</h2> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.12] - 2023-12-28</h2> <h3>Performance</h3> <ul> <li>Only ask <code>TypedValueParser</code> for possible values if needed</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/6d601e6f312857d78f47741268f1748840484d4a"><code>6d601e6</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/048e7f0fbc4f8108894e4307af768c8d332a0576"><code>048e7f0</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/53f5b820988c1c03f0d2696fc144857ad461edc1"><code>53f5b82</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5267">#5267</a> from vermiculus/sa/avoid-pv-expansion-in-help</li> <li><a href="https://github.com/clap-rs/clap/commit/05cd057978db743a65fb5fde33213af752d064e7"><code>05cd057</code></a> perf: Avoid retrieving possible_values unless used</li> <li><a href="https://github.com/clap-rs/clap/commit/29208083b0598ba7d1b80e79821c0ba3eb2342ce"><code>2920808</code></a> test: Update snapshots</li> <li><a href="https://github.com/clap-rs/clap/commit/28763ebb6d8714f6ca588bf477729040e0e760b0"><code>28763eb</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/ace7bb5b4570b030f7c2d0fa91e0afaaac1b0030"><code>ace7bb5</code></a> docs(complete): Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/76beca4d4d42a817bbb578f23553c64ded2aea97"><code>76beca4</code></a> docs(complete): Polish API reference for dynamic</li> <li><a href="https://github.com/clap-rs/clap/commit/3630e582d3ec59912b8e9369c38687695ddb1f43"><code>3630e58</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5273">#5273</a> from epage/docsrs</li> <li><a href="https://github.com/clap-rs/clap/commit/3724b9e2e4c2a2e69337b6d809949b246d3fef39"><code>3724b9e</code></a> docs: Include more content on docs.rs</li> <li>See full diff in <a href="https://github.com/clap-rs/clap/compare/v4.4.11...v4.4.12">compare view</a></li> </ul> </details> <br /> Updates `serde_yaml` from 0.9.29 to 0.9.30 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/serde-yaml/releases">serde_yaml's releases</a>.</em></p> <blockquote> <h2>0.9.30</h2> <ul> <li>Update proc-macro2 to fix caching issue when using a rustc-wrapper such as sccache</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/serde-yaml/commit/09ee25156f608f95150b27edd120bd5471db3c64"><code>09ee251</code></a> Release 0.9.30</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/caea939ece85ab54ac41de0672d683905f1e406a"><code>caea939</code></a> Pull in proc-macro2 sccache fix</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/d255918c141fd72d01f169bb5aa0152234981699"><code>d255918</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/serde-yaml/issues/403">#403</a> from dtolnay/optionifletelse</li> <li><a href="https://github.com/dtolnay/serde-yaml/commit/8cfeedd766f83dab24d03b9fb11b72886a247425"><code>8cfeedd</code></a> Remove option_if_let_else clippy suppression</li> <li>See full diff in <a href="https://github.com/dtolnay/serde-yaml/compare/0.9.29...0.9.30">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2024-01-04 10:32:09 +01:00
dependabot[bot]	d32f66fb8f	Bump chrono from 0.4.27 to 0.4.31 (#2761) ... Bumps [chrono](https://github.com/chronotope/chrono) from 0.4.27 to 0.4.31. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/chronotope/chrono/releases">chrono's releases</a>.</em></p> <blockquote> <h2>0.4.31</h2> <p>Another maintenance release. It was not a planned effort to improve our support for UNIX timestamps, yet most PRs seem related to this.</p> <h3>Deprecations</h3> <ul> <li>Deprecate <code>timestamp_nanos</code> in favor of the non-panicking <code>timestamp_nanos_opt</code> (<a href="https://redirect.github.com/chronotope/chrono/issues/1275">#1275</a>)</li> </ul> <h3>Additions</h3> <ul> <li>Add <code>DateTime::&lt;Utc&gt;::from_timestamp</code> (<a href="https://redirect.github.com/chronotope/chrono/issues/1279">#1279</a>, thanks <a href="https://github.com/demurgos"><code>@​demurgos</code></a>)</li> <li>Add <code>TimeZone::timestamp_micros</code> (<a href="https://redirect.github.com/chronotope/chrono/issues/1285">#1285</a>, thanks <a href="https://github.com/emikitas"><code>@​emikitas</code></a>)</li> <li>Add <code>DateTime&lt;Tz&gt;::timestamp_nanos_opt</code> and <code>NaiveDateTime::timestamp_nanos_opt</code> (<a href="https://redirect.github.com/chronotope/chrono/issues/1275">#1275</a>)</li> <li>Add <code>UNIX_EPOCH</code> constants (<a href="https://redirect.github.com/chronotope/chrono/issues/1291">#1291</a>)</li> </ul> <h3>Fixes</h3> <ul> <li>Format day of month in RFC 2822 without padding (<a href="https://redirect.github.com/chronotope/chrono/issues/1272">#1272</a>)</li> <li>Don't allow strange leap seconds which are not on a minute boundary initialization methods (<a href="https://redirect.github.com/chronotope/chrono/issues/1283">#1283</a>) This makes many methods a little more strict: <ul> <li><code>NaiveTime::from_hms_milli</code></li> <li><code>NaiveTime::from_hms_milli_opt</code></li> <li><code>NaiveTime::from_hms_micro</code></li> <li><code>NaiveTime::from_hms_micro_opt</code></li> <li><code>NaiveTime::from_hms_nano</code></li> <li><code>NaiveTime::from_hms_nano_opt</code></li> <li><code>NaiveTime::from_num_seconds_from_midnight</code></li> <li><code>NaiveTime::from_num_seconds_from_midnight_opt</code></li> <li><code>NaiveDate::and_hms_milli</code></li> <li><code>NaiveDate::and_hms_milli_opt</code></li> <li><code>NaiveDate::and_hms_micro</code></li> <li><code>NaiveDate::and_hms_micro_opt</code></li> <li><code>NaiveDate::and_hms_nano</code></li> <li><code>NaiveDate::and_hms_nano_opt</code></li> <li><code>NaiveDateTime::from_timestamp</code></li> <li><code>NaiveDateTime::from_timestamp_opt</code></li> <li><code>TimeZone::timestamp</code></li> <li><code>TimeZone::timestamp_opt</code></li> </ul> </li> <li>Fix underflow in <code>NaiveDateTime::timestamp_nanos_opt</code> (<a href="https://redirect.github.com/chronotope/chrono/issues/1294">#1294</a>, thanks <a href="https://github.com/crepererum"><code>@​crepererum</code></a>)</li> </ul> <h3>Documentation</h3> <ul> <li>Add more documentation about the RFC 2822 obsolete date format (<a href="https://redirect.github.com/chronotope/chrono/issues/1267">#1267</a>)</li> </ul> <h3>Internal</h3> <ul> <li>Remove internal <code>__doctest</code> feature and <code>doc_comment</code> dependency (<a href="https://redirect.github.com/chronotope/chrono/issues/1276">#1276</a>)</li> <li>CI: Bump <code>actions/checkout</code> from 3 to 4 (<a href="https://redirect.github.com/chronotope/chrono/issues/1280">#1280</a>)</li> <li>Optimize <code>NaiveDate::add_days</code> for small values (<a href="https://redirect.github.com/chronotope/chrono/issues/1214">#1214</a>)</li> <li>Upgrade <code>pure-rust-locales</code> to 0.7.0 (<a href="https://redirect.github.com/chronotope/chrono/issues/1288">#1288</a>, thanks <a href="https://github.com/jeremija"><code>@​jeremija</code></a> wo did good improvements on <code>pure-rust-locales</code>)</li> </ul> <p>Thanks to all contributors on behalf of the chrono team, <a href="https://github.com/djc"><code>@​djc</code></a> and <a href="https://github.com/pitdicker"><code>@​pitdicker</code></a>!</p> <h2>0.4.30</h2> <p>In this release, we have decided to swap out the <code>chrono::Duration</code> type (which has been a re-export of time 0.1 <code>Duration</code> type) with our own definition, which exposes a strict superset of the <code>time::Duration</code> API. This helps avoid warnings about the [CVE-2020-26235] and [RUSTSEC-2020-0071] advisories for downstream users and allows us to improve the <code>Duration</code> API going forward.</p> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/chronotope/chrono/commit/e730c6ac45649a6a636abf30b796304bc46ecd15"><code>e730c6a</code></a> Bump version to 0.4.31</li> <li><a href="https://github.com/chronotope/chrono/commit/2afdde8f7f23f087b5027662e2882dba0663fef7"><code>2afdde8</code></a> fix: underflow during datetime-&gt;nanos conversion</li> <li><a href="https://github.com/chronotope/chrono/commit/46ad2c2b2c901eb20e43a7fca025aac02605bda4"><code>46ad2c2</code></a> Add <code>UNIX_EPOCH</code> constants</li> <li><a href="https://github.com/chronotope/chrono/commit/1df8db3a547bf50929d3d1774306f996b63e9e7c"><code>1df8db3</code></a> Add TimeZone::timestamp_micros</li> <li><a href="https://github.com/chronotope/chrono/commit/861d4e12487181e71744478a320db20f56bd61af"><code>861d4e1</code></a> Make TimeZone::timestamp_millis_opt use</li> <li><a href="https://github.com/chronotope/chrono/commit/3c4846a88235a38105a047b0acd34ce239a1cfb5"><code>3c4846a</code></a> Upgrade pure-rust-locales to 0.7.0</li> <li><a href="https://github.com/chronotope/chrono/commit/6665804676e55e9e2375eed7c10cc9e0910abf11"><code>6665804</code></a> Deny leap second if secs != 59 in <code>from_num_seconds_from_midnight_opt</code></li> <li><a href="https://github.com/chronotope/chrono/commit/61b7ffbb7a95df577c308eb0f2ab5c68e1566cf1"><code>61b7ffb</code></a> Deny leap second if secs != 59 in <code>from_hms_nano_opt</code></li> <li><a href="https://github.com/chronotope/chrono/commit/202af6cfda9bfdb195dc96377fcdeee7ed024b65"><code>202af6c</code></a> Don't generate leap seconds that are not 60 in NaiveTime's Arbitrary impl</li> <li><a href="https://github.com/chronotope/chrono/commit/60283ab55cbc9ea6caa86e19bf5da2c086cdf4bc"><code>60283ab</code></a> Don't create strange leap seconds in tests</li> <li>Additional commits viewable in <a href="https://github.com/chronotope/chrono/compare/v0.4.27...v0.4.31">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-12-20 09:48:26 +01:00
André Silva	421af26b1f	Update schnorrkel to 0.11.4 (#2524)	2023-12-19 23:24:02 +00:00
Squirrel	be8e626806	Set clippy lints in workspace (requires rust 1.74) (#2390) ... We currently use a bit of a hack in `.cargo/config` to make sure that clippy isn't too annoying by specifying the list of lints. There is now a stable way to define lints for a workspace. The only down side is that every crate seems to have to opt into this so there's a *few* files modified in this PR. Dependencies: - [x] PR that upgrades CI to use rust 1.74 is merged. --------- Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com> Co-authored-by: Branislav Kontur <bkontur@gmail.com> Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>	2023-12-13 15:11:07 +01:00
dependabot[bot]	6742aba05f	Bump the known_good_semver group with 2 updates (#2570) ... Bumps the known_good_semver group with 2 updates: [serde](https://github.com/serde-rs/serde) and [clap](https://github.com/clap-rs/clap). Updates `serde` from 1.0.188 to 1.0.193 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/serde/releases">serde's releases</a>.</em></p> <blockquote> <h2>v1.0.193</h2> <ul> <li>Fix field names used for the deserialization of <code>RangeFrom</code> and <code>RangeTo</code> (<a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a>, <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a>, thanks <a href="https://github.com/emilbonnek"><code>@​emilbonnek</code></a>)</li> </ul> <h2>v1.0.192</h2> <ul> <li>Allow internal tag field in untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a>, thanks <a href="https://github.com/robsdedude"><code>@​robsdedude</code></a>)</li> </ul> <h2>v1.0.191</h2> <ul> <li>Documentation improvements</li> </ul> <h2>v1.0.190</h2> <ul> <li>Preserve NaN sign when deserializing f32 from f64 or vice versa (<a href="https://redirect.github.com/serde-rs/serde/issues/2637">#2637</a>)</li> </ul> <h2>v1.0.189</h2> <ul> <li>Fix &quot;cannot infer type&quot; error when internally tagged enum contains untagged variant (<a href="https://redirect.github.com/serde-rs/serde/issues/2613">#2613</a>, thanks <a href="https://github.com/ahl"><code>@​ahl</code></a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/serde/commit/44613c7d0190dbb5ecd2d5ec19c636f45b7488cc"><code>44613c7</code></a> Release 1.0.193</li> <li><a href="https://github.com/serde-rs/serde/commit/c706281df3c8d50dba1763f19c856df2746eba6c"><code>c706281</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2655">#2655</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/65d75b8fe3105f00ab2e01537d568d4587167582"><code>65d75b8</code></a> Add RangeFrom and RangeTo tests</li> <li><a href="https://github.com/serde-rs/serde/commit/332b0cba40bcbcc7a6b23a9706277c54791a9856"><code>332b0cb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2654">#2654</a> from dtolnay/rangestartend</li> <li><a href="https://github.com/serde-rs/serde/commit/8c4af412969086bc8f54fdc2a079d373632e0a03"><code>8c4af41</code></a> Fix more RangeFrom / RangeEnd mixups</li> <li><a href="https://github.com/serde-rs/serde/commit/24a78f071b22ae491eec4127be696ac255b9b5d3"><code>24a78f0</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2653">#2653</a> from emilbonnek/fix/range-to-from-de-mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/c91c33436d7aaef7472ebc18b734ddc9b5bd11fa"><code>c91c334</code></a> Fix Range{From,To} deserialize mixup</li> <li><a href="https://github.com/serde-rs/serde/commit/2083f43a287cac8302009fda5bbe41518dd83209"><code>2083f43</code></a> Update ui test suite to nightly-2023-11-19</li> <li><a href="https://github.com/serde-rs/serde/commit/4676abdc9e6bbbddfb33a00ce8d7e81e92f01120"><code>4676abd</code></a> Release 1.0.192</li> <li><a href="https://github.com/serde-rs/serde/commit/35700eb23e21d8cb198ef4a422ddad13b855ce3b"><code>35700eb</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/serde/issues/2646">#2646</a> from robsdedude/fix/2643/allow-tag-field-in-untagged</li> <li>Additional commits viewable in <a href="https://github.com/serde-rs/serde/compare/v1.0.188...v1.0.193">compare view</a></li> </ul> </details> <br /> Updates `clap` from 4.4.6 to 4.4.10 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/releases">clap's releases</a>.</em></p> <blockquote> <h2>v4.4.10</h2> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>v4.4.9</h2> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>v4.4.8</h2> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/clap-rs/clap/blob/master/CHANGELOG.md">clap's changelog</a>.</em></p> <blockquote> <h2>[4.4.10] - 2023-11-28</h2> <h3>Documentation</h3> <ul> <li>Link out to changelog</li> <li>Cross link derive's attribute reference to derive tutorial</li> </ul> <h2>[4.4.9] - 2023-11-27</h2> <h3>Fixes</h3> <ul> <li><em>(help)</em> Show correct <code>Command::about</code> under flattened headings</li> <li><em>(help)</em> Respect <code>hide</code> when flattening subcommands</li> </ul> <h2>[4.4.8] - 2023-11-10</h2> <h3>Features</h3> <ul> <li>Add <code>Command::flatten_help</code> to allow <code>git stash -h</code> like help for subcommands</li> </ul> <h2>[4.4.7] - 2023-10-24</h2> <h3>Performance</h3> <ul> <li>Reduced code size</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/clap-rs/clap/commit/c0a1814d3c1d93c18faaedc95fd251846e47f4fe"><code>c0a1814</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/c83e681e20b05f7e128088f47f8fcfc44e8ea166"><code>c83e681</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/91bcac4ca9d442786f554abeb7b1ed6d7a464a42"><code>91bcac4</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5230">#5230</a> from epage/migrate</li> <li><a href="https://github.com/clap-rs/clap/commit/030d87505d150345ddd425c1df21c034d2ae7748"><code>030d875</code></a> docs: Link out to the changelog at the relevant tag</li> <li><a href="https://github.com/clap-rs/clap/commit/b661a9de04aebd1adaaafdbf7e470f07a8d8a36d"><code>b661a9d</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5229">#5229</a> from epage/derive</li> <li><a href="https://github.com/clap-rs/clap/commit/a08587b00e347492165ded1415bad6ab339e9f0b"><code>a08587b</code></a> docs(derive): Link to tutorial sections for attributes</li> <li><a href="https://github.com/clap-rs/clap/commit/21b671f689bc0b8d790dc8c42902c22822bf6f82"><code>21b671f</code></a> chore: Release</li> <li><a href="https://github.com/clap-rs/clap/commit/93ba76dbaaf9136313a4fe2978693cc39fa467dd"><code>93ba76d</code></a> docs: Update changelog</li> <li><a href="https://github.com/clap-rs/clap/commit/c1c55b30d853446e2cab78664c0d22c1b77d4dfd"><code>c1c55b3</code></a> Merge pull request <a href="https://redirect.github.com/clap-rs/clap/issues/5228">#5228</a> from epage/flat</li> <li><a href="https://github.com/clap-rs/clap/commit/b13f6d98622b80ba30e63c2c6e65d218cc8a4de3"><code>b13f6d9</code></a> fix(help): Hide 'help' if only flattened subcommand</li> <li>Additional commits viewable in <a href="https://github.com/clap-rs/clap/compare/v4.4.6...v4.4.10">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-11-30 18:04:12 +01:00
Michal Kucharczyk	305aefc43d	serde_json: bumped to 1.0.108 (#2168) ... This PR updates the version of `serde_json` to `1.0.108` throughout the codebase.	2023-11-06 14:00:06 +02:00
dependabot[bot]	1882e9e457	Bump the known_good_semver group with 2 updates (#1553) ... Bumps the known_good_semver group with 2 updates: [serde_json](https://github.com/serde-rs/json) and [syn](https://github.com/dtolnay/syn). Updates `serde_json` from 1.0.106 to 1.0.107 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p> <blockquote> <h2>v1.0.107</h2> <ul> <li>impl IntoDeserializer for &amp;RawValue (<a href="https://redirect.github.com/serde-rs/json/issues/1071">#1071</a>)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/serde-rs/json/commit/b6e113f2036c52e994ca805e530ee4ffae791f71"><code>b6e113f</code></a> Release 1.0.107</li> <li><a href="https://github.com/serde-rs/json/commit/00626a0a95b3d4cee8d57709f0acc804c1296716"><code>00626a0</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1073">#1073</a> from dtolnay/rawvalue</li> <li><a href="https://github.com/serde-rs/json/commit/b9d296f87d6081afdd590d5a6006737db961302b"><code>b9d296f</code></a> IntoDeserializer for &amp;RawValue</li> <li><a href="https://github.com/serde-rs/json/commit/4ea34a2566ba82a2e602526d0919d23e88c9e5ef"><code>4ea34a2</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1072">#1072</a> from dtolnay/rawvalue</li> <li><a href="https://github.com/serde-rs/json/commit/fe30766ae5c79bfb670b2de1c5596e6e11e22f8c"><code>fe30766</code></a> Support deserializing from &amp;RawValue</li> <li><a href="https://github.com/serde-rs/json/commit/2c22077f0e2decfda5cdfd5821c5f9547d584b76"><code>2c22077</code></a> Merge pull request <a href="https://redirect.github.com/serde-rs/json/issues/1062">#1062</a> from osiewicz/remove_build_rs</li> <li><a href="https://github.com/serde-rs/json/commit/04f7758b6eae935237574b25a1e63cf5e281e19e"><code>04f7758</code></a> fixup! chore: Remove no_btreemap_get_key_value and no_btreemap_remove_entry.</li> <li><a href="https://github.com/serde-rs/json/commit/83bdc5fd4213d94201a3d9ad0f2943da7eba1dd6"><code>83bdc5f</code></a> Omit return keyword in <code>remove_entry</code></li> <li><a href="https://github.com/serde-rs/json/commit/89a274195680d3ea6a2b442ff633b81ccf60bbe4"><code>89a2741</code></a> Revert &quot;Remove limb_width32 and limb_width64 features&quot;</li> <li><a href="https://github.com/serde-rs/json/commit/16e04ceeddfdfad18fb1ae8530695a318fa9bc02"><code>16e04ce</code></a> fixup! Remove limb_width32 and limb_width64 features</li> <li>See full diff in <a href="https://github.com/serde-rs/json/compare/v1.0.106...v1.0.107">compare view</a></li> </ul> </details> <br /> Updates `syn` from 2.0.32 to 2.0.33 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/dtolnay/syn/releases">syn's releases</a>.</em></p> <blockquote> <h2>2.0.33</h2> <ul> <li>Special handling for the <code>(/*ERROR*/)</code> placeholder that rustc uses for macros that fail to expand</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/dtolnay/syn/commit/5e3f55e684b7e33424b9f551105463418b196eb4"><code>5e3f55e</code></a> Release 2.0.33</li> <li><a href="https://github.com/dtolnay/syn/commit/3e04809f5218c6d5fb2b09a6c55933e785825c75"><code>3e04809</code></a> Pull in proc-macro2 error placeholder change</li> <li><a href="https://github.com/dtolnay/syn/commit/2cd5608a4c37810bb0947b0c161a20695b3ce487"><code>2cd5608</code></a> Merge pull request <a href="https://redirect.github.com/dtolnay/syn/issues/1508">#1508</a> from dtolnay/error</li> <li><a href="https://github.com/dtolnay/syn/commit/84cfe09484f6468bc85fb01db11c6a10fcb2d988"><code>84cfe09</code></a> Fall through to 'Unrecognized literal' error</li> <li><a href="https://github.com/dtolnay/syn/commit/a80570c81bf15c9afcf8e2470ab06f60f7a8183d"><code>a80570c</code></a> Parse rustc's representation of macro expansion error</li> <li>See full diff in <a href="https://github.com/dtolnay/syn/compare/2.0.32...2.0.33">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-09-15 11:45:49 +02:00
dependabot[bot]	056c4221af	Bump the known_good_semver group with 2 updates (#1485) ... Bumps the known_good_semver group with 2 updates: [serde_json](https://github.com/serde-rs/json) and [syn](https://github.com/dtolnay/syn). Updates `serde_json` from 1.0.105 to 1.0.106 - [Release notes](https://github.com/serde-rs/json/releases) - [Commits](https://github.com/serde-rs/json/compare/v1.0.105...v1.0.106) Updates `syn` from 2.0.31 to 2.0.32 - [Release notes](https://github.com/dtolnay/syn/releases) - [Commits](https://github.com/dtolnay/syn/compare/2.0.31...2.0.32) --- updated-dependencies: - dependency-name: serde_json dependency-type: direct:production update-type: version-update:semver-patch dependency-group: known_good_semver - dependency-name: syn dependency-type: direct:production update-type: version-update:semver-patch dependency-group: known_good_semver ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-09-11 13:09:34 +02:00
dependabot[bot]	711132c961	Bump thiserror from 1.0.47 to 1.0.48 (#1396) ... Bumps [thiserror](https://github.com/dtolnay/thiserror) from 1.0.47 to 1.0.48. - [Release notes](https://github.com/dtolnay/thiserror/releases) - [Commits](https://github.com/dtolnay/thiserror/compare/1.0.47...1.0.48) --- updated-dependencies: - dependency-name: thiserror dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>	2023-09-05 09:27:19 +02:00
Chevdor	a30092ab42	Markdown linter (#1309) ... * Add markdown linting - add linter default rules - adapt rules to current code - fix the code for linting to pass - add CI check fix #1243 * Fix markdown for Substrate * Fix tooling install * Fix workflow * Add documentation * Remove trailing spaces * Update .github/.markdownlint.yaml Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io> * Fix mangled markdown/lists * Fix captalization issues on known words	2023-09-04 12:02:32 +03:00
dependabot[bot]	c5060a5d5a	Bump the known_good_semver group with 2 updates (#1284) ... Bumps the known_good_semver group with 2 updates: [serde](https://github.com/serde-rs/serde) and [clap](https://github.com/clap-rs/clap). Updates `serde` from 1.0.186 to 1.0.188 - [Release notes](https://github.com/serde-rs/serde/releases) - [Commits](https://github.com/serde-rs/serde/compare/v1.0.186...v1.0.188) Updates `clap` from 4.4.0 to 4.4.1 - [Release notes](https://github.com/clap-rs/clap/releases) - [Changelog](https://github.com/clap-rs/clap/blob/master/CHANGELOG.md) - [Commits](https://github.com/clap-rs/clap/compare/clap_complete-v4.4.0...v4.4.1) --- updated-dependencies: - dependency-name: serde dependency-type: direct:production update-type: version-update:semver-patch dependency-group: known_good_semver - dependency-name: clap dependency-type: direct:production update-type: version-update:semver-patch dependency-group: known_good_semver ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-08-30 10:54:15 +02:00
dependabot[bot]	b4ee6f2aa9	Bump chrono from 0.4.26 to 0.4.27 (#1286) ... Bumps [chrono](https://github.com/chronotope/chrono) from 0.4.26 to 0.4.27. - [Release notes](https://github.com/chronotope/chrono/releases) - [Changelog](https://github.com/chronotope/chrono/blob/main/CHANGELOG.md) - [Commits](https://github.com/chronotope/chrono/compare/v0.4.26...v0.4.27) --- updated-dependencies: - dependency-name: chrono dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2023-08-30 11:20:35 +10:00
Oliver Tale-Yazdi	dcda0e50f5	Fix build profiles (#1229) ... * Fix build profiles Closes https://github.com/paritytech/polkadot-sdk/issues/1155 Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io> * Manually set version to 1.0.0 Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io> * Use workspace repo Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io> * 'Authors and Edition from workspace Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io> --------- Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>	2023-08-29 13:39:41 +02:00
alvicsam	f441a5fc93	Diener workspacify ... Signed-off-by: alvicsam <alvicsam@gmail.com>	2023-08-25 11:05:17 +02:00
Aaro Altonen	dd1b29c2f8	Revert "chore: update libp2p to 0.52.1 (#14429)" (#14722) ... * Revert "chore: update libp2p to 0.52.1 (#14429)" This reverts commit 59d8b86450. * Fix dependencies * Update dependencies * Update Cargo.lock	2023-08-16 10:06:13 +00:00
Anton	59d8b86450	chore: update libp2p to 0.52.1 (#14429) ... * update libp2p to 0.52.0 * proto name now must implement `AsRef<str>` * update libp2p version everywhere * ToSwarm, FromBehaviour, ToBehaviour also LocalProtocolsChange and RemoteProtocolsChange * new NetworkBehaviour invariants * replace `Vec<u8>` with `StreamProtocol` * rename ConnectionHandlerEvent::Custom to NotifyBehaviour * remove DialError & ListenError invariants also fix pending_events * use connection_limits::Behaviour See https://github.com/libp2p/rust-libp2p/pull/3885 * impl `void::Void` for `BehaviourOut` also use `Behaviour::with_codec` * KademliaHandler no longer public * fix StreamProtocol construction * update libp2p-identify to 0.2.0 * remove non-existing methods from PollParameters rename ConnectionHandlerUpgrErr to StreamUpgradeError * `P2p` now contains `PeerId`, not `Multihash` * use multihash-codetable crate * update Cargo.lock * reformat text * comment out tests for now * remove `.into()` from P2p * confirm observed addr manually See https://github.com/libp2p/rust-libp2p/blob/master/protocols/identify/CHANGELOG.md#0430 * remove SwarmEvent::Banned since we're not using `ban_peer_id`, this can be safely removed. we may want to introduce `libp2p::allow_block_list` module in the future. * fix imports * replace `libp2p` with smaller deps in network-gossip * bring back tests * finish rewriting tests * uncomment handler tests * Revert "uncomment handler tests" This reverts commit 720a06815887f4e10767c62b58864a7ec3a48e50. * add a fixme * update Cargo.lock * remove extra From * make void uninhabited * fix discovery test * use autonat protocols confirming external addresses manually is unsafe in open networks * fix SyncNotificationsClogged invariant * only set server mode manually in tests doubt that we need to set it on node since we're adding public addresses * address @dmitry-markin comments * remove autonat * removed unused var * fix EOL * update smallvec and sha2 in attempt to compile polkadot * bump k256 in attempt to build cumulus --------- Co-authored-by: parity-processbot <>	2023-07-25 11:12:24 +00:00
dependabot[bot]	688ac3d1c7	Bump serde from 1.0.162 to 1.0.163 (#14271) ... * Bump serde from 1.0.162 to 1.0.163 Bumps [serde](https://github.com/serde-rs/serde) from 1.0.162 to 1.0.163. - [Release notes](https://github.com/serde-rs/serde/releases) - [Commits](https://github.com/serde-rs/serde/compare/v1.0.162...v1.0.163) --- updated-dependencies: - dependency-name: serde dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * bump ci * bump ci for cumulus * bump ci again --------- Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Sam Johnson <sam@durosoft.com>	2023-05-31 17:10:00 +00:00
Anton	e4b1aa1811	Upgrade to libp2p 0.51.3 (#13587) ... * client/network: upgrade to libp2p 0.51.0 * make discovery.rs compile * make peer_info.rs compile * changes to notifications and request-response proto * make service.rs compile * towards making request_responses.rs compile * make request_responses.rs compile * make request_responses.rs compile * fix notifications/behaviour.rs tests * fix warnings * remove old code * allow deprecated code (temporary) * upgrade to libp2p 0.51.1 * add TODO for behaviour tests * return empty vec if peer_id is absent https://github.com/paritytech/substrate/pull/13587#discussion_r1141695167 fyi: I don't really know what the old behaviour was. * update comment to reflect new defaults Closes #13338 * Revert "update comment to reflect new defaults" This reverts commit 7a981abd69308e9d522ec94905f181439a1b1dba. * remove config.rs (from wrong merge) * upgrade to libp2p 0.51.2 * fix formatting * use handle_pending_outbound_connection in networt_state RPC * update deps * use re-exports when we use other libp2p packages * Apply suggestions from code review Co-authored-by: Dmitry Markin <dmitry@markin.tech> * format code * handle potential errors in network_state RPC * only update libp2p crate * update libp2p-core * fix docs * use libp2p-identity instead of libp2p where it's possible. libp2p-identity is much smaller, hence makes sense to use it instead of larger libp2p crate. * Update client/network/src/discovery.rs Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com> * update Cargo.lock * add comment for per_connection_event_buffer_size current value is somewhat arbitrary and needs to be tweaked depending on memory usage and network worker sleep stats. * fix link format * update Cargo.lock * upgrade to libp2p 0.51.3 * deprecate mplex * Revert "deprecate mplex" This reverts commit 9e25820e706e464a0e962a8604861fcb2a7641eb. * Revert "upgrade to libp2p 0.51.3" This reverts commit 6544dd4138e2f89517bd7c7281fc78a638ec7040. * use new libp2p version in `statement` crate * pin version temporarily * libp2p 0.51.3 * deprecate mplex * deprecate legacy noise handshake * fix build error * update libp2p-identity * enable libp2p-identity:ed25519 feature in sc-consensus * enable ed25519 for peerset as well --------- Co-authored-by: Dmitry Markin <dmitry@markin.tech> Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com> Co-authored-by: parity-processbot <>	2023-05-12 07:12:51 +00:00
Vivek Pandya	bc53b9a03a	Remove years from copyright notes. (#13415) ... * Change copyright year to 2023 from 2022 * Fix incorrect update of copyright year * Remove years from copy right header * Fix remaining files * Fix typo in a header and remove update-copyright.sh	2023-02-21 18:46:41 +00:00
Anton	f2dcd9520c	upgrade libp2p to 0.50.0 (#12734) ... * upgrade libp2p to 0.50.0 * on_swarm_event and on_connection_handler_event * replace `Swarm::new` with `Swarm::with_threadpool_executor` * on_swarm_event and on_connection_handler_event part 2 * on_swarm_event and on_connection_handler_event part 3 * on_swarm_event and on_connection_handler_event part 4 * update libp2p * libp2p 0.50.0 * rename OutboundQueryCompleted to OutboundQueryProgressed refs https://github.com/libp2p/rust-libp2p/pull/2712 * remove unused var * accumulate outbound_query_records until query is finished * format code * use p_handler instead of new_handler https://github.com/paritytech/substrate/pull/12734#discussion_r1027640610 * pass ListenFailure to kademlia https://github.com/paritytech/substrate/pull/12734#discussion_r1034716664 * use tokio executor in tests https://github.com/paritytech/substrate/pull/12734#discussion_r1039291776 * use chrono Local::now instead of deprecated Local::today * remove unused vars from request_responses tests * attempt to fix pallet UI tests * restart CI * restart CI * restart CI * restart CI * restart CI * restart CI * restart CI * restart CI	2023-01-05 12:03:41 +00:00
Dmitry Markin	34eb463d99	Runtime diagnostics for leaked messages in unbounded channels (#12971)	2022-12-23 16:03:08 +03:00
Qinxuan Chen	40c04cf11d	*: update rand to v0.8.5 (#12962) ... * *: update rand to v0.8.5 * *: remove useless deps from Cargo.toml * fix pallet-session-benchmarking * fix pallet-election-provider-support test * remove useless rand from dev-dependencies	2022-12-19 07:38:51 +01:00
Dmitry Markin	5eb84f9cc6	Upgrade tokio to 1.22.0 and replace async-std with tokio (#12646) ... * Replace deprecated libp2p feature specs with correct ones * Bump tokio to 1.21.2 * Replace async-std libp2p primitives with tokio ones * minor: rustfmt * Fix TestNet to run initialization in the tokio context * Convert telemetry test from async-std to tokio * Convert notifications tests from async-std to tokio * Convert chain sync tests from async-std to tokio * Ditch async-std completely * Make executor mandatory * Bump tokio to 1.22.0 * minor: rustfmt * Explicitly use tokio runtime in tests * Move more tests to explicit tokio runtime * Explicitly set multithreaded runtime in tokio test * minor: rustfmt * minor: fix comment * Replace async-std with tokio in MMR tests	2022-12-05 08:18:46 +00:00
Dmitrii Markin	bb175f0373	Upgrade libp2p to 0.49.0 (#12256) ... * cargo upgrade libp2p * Get rid of `NetworkBehaviourEventProcess` in handling of `CustomMessageOutcome` * Get rid of `NetworkBehaviourEventProcess` in handling of `request_responses::Event` * Get rid of `NetworkBehaviourEventProcess` in handling of `peer_info::PeerInfoEvent` * Get rid of `NetworkBehaviourEventProcess` in handling of `DiscoveryOut` * Get rid of `poll()` method in `Bahaviour` * minor: comments * Upgrade libp2p to 0.49.0 (unreleased) * Support multiple Kad protocol names * Make borrow checker happy * minor: wording * Make substrate build with libp2p-0.49.0 * rustfmt * Get rid of MdnsWrapper * Resolve deprecation warnings * Fix documentation * Apply suggestions from code review: fix typos Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com> * Apply suggestion: simplify kad protocol name matching Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>	2022-10-17 11:02:37 +00:00
Bastian Köcher	fc3f9268f6	Upgrade pin-project (#12426) ... This fixes some warnings on latest nightly.	2022-10-07 10:46:57 +00:00
dependabot[bot]	75a76d967b	Bump serde_json from 1.0.79 to 1.0.85 (#12079) ... Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.79 to 1.0.85. - [Release notes](https://github.com/serde-rs/json/releases) - [Commits](https://github.com/serde-rs/json/compare/v1.0.79...v1.0.85) --- updated-dependencies: - dependency-name: serde_json dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2022-08-26 09:32:20 +02:00
dependabot[bot]	5318bf53d4	Bump parking_lot from 0.12.0 to 0.12.1 (#12098) ... Bumps [parking_lot](https://github.com/Amanieu/parking_lot) from 0.12.0 to 0.12.1. - [Release notes](https://github.com/Amanieu/parking_lot/releases) - [Changelog](https://github.com/Amanieu/parking_lot/blob/master/CHANGELOG.md) - [Commits](https://github.com/Amanieu/parking_lot/compare/0.12.0...0.12.1) --- updated-dependencies: - dependency-name: parking_lot dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2022-08-25 23:52:19 +02:00
Roman	1902dc169d	Upgrade libp2p to 0.46.1 (#11787) ... * Update libp2p to 0.46.0 * Update libp2p to 0.46.1 * Fix telemetry initialization * Fix tests	2022-07-12 17:00:00 +00:00
Roman	1988c4ac1d	Upgrade to libp2p 0.45.1 (#11682) ... * Upgrade to libp2p 0.45.1 * Limit max_negotiating_inbound_streams to 512 * Upgrade prost-build to 0.10 * Set max_negotiating_inbound_streams to 2048 Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com> * Fix authority discovery protobuf * Fix comments in authority-discovery schema Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com> * Add a comment about transport initialization Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>	2022-06-17 13:47:14 +00:00
dependabot[bot]	4a3758d9b8	Bump log from 0.4.16 to 0.4.17 (#11369) ... * Bump log from 0.4.16 to 0.4.17 Bumps [log](https://github.com/rust-lang/log) from 0.4.16 to 0.4.17. - [Release notes](https://github.com/rust-lang/log/releases) - [Changelog](https://github.com/rust-lang/log/blob/master/CHANGELOG.md) - [Commits](https://github.com/rust-lang/log/commits/0.4.17) --- updated-dependencies: - dependency-name: log dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> * Update Cargo.lock Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>	2022-05-15 22:21:04 -04:00
Shawn Tabrizi	7d5202341b	Basic TOML Lint (#11348) ... * basic lint * lint ordering	2022-05-04 13:38:54 +00:00
Falco Hirschenberger	b581604aa7	Apply some clippy lints (#11154) ... * Apply some clippy hints * Revert clippy ci changes * Update client/cli/src/commands/generate.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update client/cli/src/commands/inspect_key.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update client/db/src/bench.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update client/db/src/bench.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update client/service/src/client/block_rules.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update client/service/src/client/block_rules.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update client/network/src/transactions.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update client/network/src/protocol.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Revert due to missing `or_default` function. * Fix compilation and simplify code * Undo change that corrupts benchmark. * fix clippy * Update client/service/test/src/lib.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update client/state-db/src/noncanonical.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update client/state-db/src/noncanonical.rs remove leftovers! * Update client/tracing/src/logging/directives.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update utils/fork-tree/src/lib.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * added needed ref * Update frame/referenda/src/benchmarking.rs * Simplify byte-vec creation * let's just not overlap the ranges * Correction * cargo fmt * Update utils/frame/benchmarking-cli/src/shared/stats.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update utils/frame/benchmarking-cli/src/pallet/command.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> * Update utils/frame/benchmarking-cli/src/pallet/command.rs Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com> Co-authored-by: Giles Cope <gilescope@gmail.com>	2022-04-30 21:28:27 +00:00
Roman	887acda7d0	Upgrade to libp2p 0.44.0 (#11009) ... * Update libp2p to 0.43.0, lru to 0.7.3 * Fix websoket Incoming::Data * Rename ProtocolsHandler -> ConnectionHandler, remove inject_dis/connected, minor fixes * Fix args for inject_connection* callbacks * Fix DialPeer/DialAddress * Fix debug fmt * Add Endpoint to NetworkState * Fix Kad::get_record by key * Fix Sha2_256::digest * Fix IntoConnectionHandler * Fix borrowchk * Fix DialError::WrongPeerId * Remove NodeHandlerWrapperError * Fix KademliaEvent variants * Fix impl Add for String * Fix tabs in network_state * Apply cargo fmt * Fix a typo in req/resp * Fix tests * Fix peer_info:entry.info_expire * Fix PeerInfoBehaviour inject_address_change and inject_connection_closed * Patch libp2p to 0.44.0#6cc3b4e * Fix inject_connection_closed kad, req/resp * Apply cargo fmt * Use libp2p from crates.io * Fix review notes	2022-04-29 10:49:05 +02:00
dependabot[bot]	5c4fa55f09	Bump log from 0.4.14 to 0.4.16 (#11236) ... Bumps [log](https://github.com/rust-lang/log) from 0.4.14 to 0.4.16. - [Release notes](https://github.com/rust-lang/log/releases) - [Changelog](https://github.com/rust-lang/log/blob/master/CHANGELOG.md) - [Commits](https://github.com/rust-lang/log/commits) --- updated-dependencies: - dependency-name: log dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2022-04-20 15:39:28 +02:00
Koute	8351ada6a3	Add new hardware and software metrics (#11062) ... * Add new hardware and software metrics * Move sysinfo tests into `mod tests` * Correct a typo in a comment * Remove unnecessary `nix` dependency * Fix the version tests * Add a `--disable-hardware-benchmarks` CLI argument * Disable hardware benchmarks in the integration tests * Remove unused import * Fix benchmarks compilation * Move code to a new `sc-sysinfo` crate * Correct `impl_version` comment * Move `--disable-hardware-benchmarks` to the chain-specific bin crate * Move printing out of hardware bench results to `sc-sysinfo` * Move hardware benchmarks to a separate messages; trigger them manually * Rename some of the fields in the `HwBench` struct * Revert changes to the telemetry crate; manually send hwbench messages * Move sysinfo logs into the sysinfo crate * Move the `TARGET_OS_*` constants into the sysinfo crate * Minor cleanups * Move the `HwBench` struct to the sysinfo crate * Derive `Clone` for `HwBench` * Fix broken telemetry connection notification stream * Prevent the telemetry connection notifiers from leaking if they're disconnected * Turn the telemetry notification failure log into a debug log * Rename `--disable-hardware-benchmarks` to `--no-hardware-benchmarks`	2022-04-11 18:46:53 +09:00
dependabot[bot]	98ed4afe45	Bump futures from 0.3.19 to 0.3.21 (#11133) ... Bumps [futures](https://github.com/rust-lang/futures-rs) from 0.3.19 to 0.3.21. - [Release notes](https://github.com/rust-lang/futures-rs/releases) - [Changelog](https://github.com/rust-lang/futures-rs/blob/master/CHANGELOG.md) - [Commits](https://github.com/rust-lang/futures-rs/compare/0.3.19...0.3.21) --- updated-dependencies: - dependency-name: futures dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2022-04-03 19:34:13 +00:00
dependabot[bot]	8227673745	Bump serde_json from 1.0.74 to 1.0.79 (#11020) ... Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.74 to 1.0.79. - [Release notes](https://github.com/serde-rs/json/releases) - [Commits](https://github.com/serde-rs/json/compare/v1.0.74...v1.0.79) --- updated-dependencies: - dependency-name: serde_json dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2022-03-18 15:25:16 +00:00
dependabot[bot]	e3377ddc4e	Bump futures from 0.3.16 to 0.3.19 (#10930) ... Bumps [futures](https://github.com/rust-lang/futures-rs) from 0.3.16 to 0.3.19. - [Release notes](https://github.com/rust-lang/futures-rs/releases) - [Changelog](https://github.com/rust-lang/futures-rs/blob/master/CHANGELOG.md) - [Commits](https://github.com/rust-lang/futures-rs/compare/0.3.16...0.3.19) --- updated-dependencies: - dependency-name: futures dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2022-03-01 10:22:10 +01:00
wigy	535325d2e6	Upgrading parity-scale-codec to v3 (#10825) ... * Upgraded dependencies * Adapting code to scale v3 * Empty commit to trigger CI * Triggering CI * Fixing UI test * Remove superfluous dev-dep added by #9228 * Cryout for CI	2022-02-24 15:34:34 +01:00
dependabot[bot]	2632cbb866	Bump serde from 1.0.132 to 1.0.136 (#10816) ... Bumps [serde](https://github.com/serde-rs/serde) from 1.0.132 to 1.0.136. - [Release notes](https://github.com/serde-rs/serde/releases) - [Commits](https://github.com/serde-rs/serde/compare/v1.0.132...v1.0.136) --- updated-dependencies: - dependency-name: serde dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2022-02-08 19:27:08 +00:00
dependabot[bot]	b9bc515506	Bump pin-project from 1.0.8 to 1.0.10 (#10578) ... Bumps [pin-project](https://github.com/taiki-e/pin-project) from 1.0.8 to 1.0.10. - [Release notes](https://github.com/taiki-e/pin-project/releases) - [Changelog](https://github.com/taiki-e/pin-project/blob/main/CHANGELOG.md) - [Commits](https://github.com/taiki-e/pin-project/compare/v1.0.8...v1.0.10) --- updated-dependencies: - dependency-name: pin-project dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2022-01-04 13:18:16 +00:00
dependabot[bot]	4b9573ca38	Bump serde_json from 1.0.71 to 1.0.74 (#10577) ... Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.71 to 1.0.74. - [Release notes](https://github.com/serde-rs/json/releases) - [Commits](https://github.com/serde-rs/json/compare/v1.0.71...v1.0.74) --- updated-dependencies: - dependency-name: serde_json dependency-type: direct:production update-type: version-update:semver-patch ... Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>	2022-01-04 10:05:01 +01:00