**Update:** Pushed additional changes based on the review comments.
**This pull request fixes various spelling mistakes in this
repository.**
Most of the changes are contained in the first **3** commits:
- `Fix spelling mistakes in comments and docs`
- `Fix spelling mistakes in test names`
- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`
Other source code spelling mistakes are separated into individual
commits for easier reviewing:
- `Fix the spelling of 'authority'`
- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`
- `Fix the spelling of 'prev_enqueud_messages'`
- `Fix the spelling of 'endpoint'`
- `Fix the spelling of 'children'`
- `Fix the spelling of 'PenpalSiblingSovereignAccount'`
- `Fix the spelling of 'PenpalSudoAccount'`
- `Fix the spelling of 'insufficient'`
- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`
- `Fix the spelling of 'subtracted'`
- `Fix the spelling of 'CandidatePendingAvailability'`
- `Fix the spelling of 'exclusive'`
- `Fix the spelling of 'until'`
- `Fix the spelling of 'discriminator'`
- `Fix the spelling of 'nonexistent'`
- `Fix the spelling of 'subsystem'`
- `Fix the spelling of 'indices'`
- `Fix the spelling of 'committed'`
- `Fix the spelling of 'topology'`
- `Fix the spelling of 'response'`
- `Fix the spelling of 'beneficiary'`
- `Fix the spelling of 'formatted'`
- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`
- `Fix the spelling of 'succeeded'`
- `Fix the spelling of 'reopened'`
- `Fix the spelling of 'proposer'`
- `Fix the spelling of 'InstantiationNonce'`
- `Fix the spelling of 'depositor'`
- `Fix the spelling of 'expiration'`
- `Fix the spelling of 'phantom'`
- `Fix the spelling of 'AggregatedKeyValue'`
- `Fix the spelling of 'randomness'`
- `Fix the spelling of 'defendant'`
- `Fix the spelling of 'AquaticMammal'`
- `Fix the spelling of 'transactions'`
- `Fix the spelling of 'PassingTracingSubscriber'`
- `Fix the spelling of 'TxSignaturePayload'`
- `Fix the spelling of 'versioning'`
- `Fix the spelling of 'descendant'`
- `Fix the spelling of 'overridden'`
- `Fix the spelling of 'network'`
Let me know if this structure is adequate.
**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.
~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~
~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~
~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~
**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.
~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~
Closes#2160
First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)
Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.
Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)
Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
- Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
- Signed transactions (with a hardcoded signature).
- General transactions (without a hardcoded signature).
`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.
There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).
Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.
For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.
## Code Migration
### NOW: Getting it to build
Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:
```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
/* snip */
MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```
After:
```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
/* snip */
AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```
You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let extra: SignedExtra = (
/* snip */
MySpecialSignedExtension::new(/* snip */),
);
let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
extra,
)
}
```
After:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let tx_ext: TxExtension = (
/* snip */
MySpecialSignedExtension::new(/* snip */).into(),
);
let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
tx_ext,
)
}
```
### SOON: Migrating to `TransactionExtension`
Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.
- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.
#### `TransactionExtensionBase`
This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.
#### `TransactionExtension`
Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.
Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.
Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)
Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.
If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.
## TODO
- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
- [x] `ChargeTransactionPayment`
- [x] `DummyExtension`
- [x] `ChargeAssetTxPayment` (asset-tx-payment)
- [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
- [x] `CheckWeight`
- [x] `CheckTxVersion`
- [x] `CheckSpecVersion`
- [x] `CheckNonce`
- [x] `CheckNonZeroSender`
- [x] `CheckMortality`
- [x] `CheckGenesis`
- [x] `CheckOnlySudoAccount`
- [x] `WatchDummy`
- [x] `PrevalidateAttests`
- [x] `GenericSignedExtension`
- [x] `SignedExtension` (chain-polkadot-bulletin)
- [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
- [ ]
- [x] Fix any broken tests.
---------
Signed-off-by: georgepisaltu <george.pisaltu@parity.io>
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Signed-off-by: Alexandru Gheorghe <alexandru.gheorghe@parity.io>
Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>
Co-authored-by: Nikhil Gupta <17176722+gupnik@users.noreply.github.com>
Co-authored-by: georgepisaltu <52418509+georgepisaltu@users.noreply.github.com>
Co-authored-by: Chevdor <chevdor@users.noreply.github.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Maciej <maciej.zyszkiewicz@parity.io>
Co-authored-by: Javier Viola <javier@parity.io>
Co-authored-by: Marcin S. <marcin@realemail.net>
Co-authored-by: Tsvetomir Dimitrov <tsvetomir@parity.io>
Co-authored-by: Javier Bullrich <javier@bullrich.dev>
Co-authored-by: Koute <koute@users.noreply.github.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: Vladimir Istyufeev <vladimir@parity.io>
Co-authored-by: Ross Bulat <ross@parity.io>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Svyatoslav Nikolsky <svyatonik@gmail.com>
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: s0me0ne-unkn0wn <48632512+s0me0ne-unkn0wn@users.noreply.github.com>
Co-authored-by: ordian <write@reusable.software>
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexander Samusev <41779041+alvicsam@users.noreply.github.com>
Co-authored-by: Julian Eager <eagr@tutanota.com>
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: yjh <yjh465402634@gmail.com>
Co-authored-by: Tom Mi <tommi@niemi.lol>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <79228812+paradox-tt@users.noreply.github.com>
Co-authored-by: Bastian Köcher <info@kchr.de>
Co-authored-by: Joshy Orndorff <JoshOrndorff@users.noreply.github.com>
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
Co-authored-by: PG Herveou <pgherveou@gmail.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Juan Girini <juangirini@gmail.com>
Co-authored-by: bader y <ibnbassem@gmail.com>
Co-authored-by: James Wilson <james@jsdw.me>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
Co-authored-by: Parth <desaiparth08@gmail.com>
Co-authored-by: Andrew Jones <ascjones@gmail.com>
Co-authored-by: Jonathan Udd <jonathan@dwellir.com>
Co-authored-by: Serban Iorga <serban@parity.io>
Co-authored-by: Egor_P <egor@parity.io>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Evgeny Snitko <evgeny@parity.io>
Co-authored-by: Just van Stam <vstam1@users.noreply.github.com>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
Co-authored-by: dzmitry-lahoda <dzmitry@lahoda.pro>
Co-authored-by: zhiqiangxu <652732310@qq.com>
Co-authored-by: Nazar Mokrynskyi <nazar@mokrynskyi.com>
Co-authored-by: Anwesh <anweshknayak@gmail.com>
Co-authored-by: cheme <emericchevalier.pro@gmail.com>
Co-authored-by: Sam Johnson <sam@durosoft.com>
Co-authored-by: kianenigma <kian@parity.io>
Co-authored-by: Jegor Sidorenko <5252494+jsidorenko@users.noreply.github.com>
Co-authored-by: Muharem <ismailov.m.h@gmail.com>
Co-authored-by: joepetrowski <joe@parity.io>
Co-authored-by: Alexandru Gheorghe <49718502+alexggh@users.noreply.github.com>
Co-authored-by: Gabriel Facco de Arruda <arrudagates@gmail.com>
Co-authored-by: Squirrel <gilescope@gmail.com>
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com>
Co-authored-by: georgepisaltu <george.pisaltu@parity.io>
Co-authored-by: command-bot <>
* Change copyright year to 2023 from 2022
* Fix incorrect update of copyright year
* Remove years from copy right header
* Fix remaining files
* Fix typo in a header and remove update-copyright.sh
* initial impl
* add template test
* linear fit proof size
* always record proof when tracking storage
* calculate worst case pov
* remove duplicate worst case
* cargo run --quiet --profile=production --features=runtime-benchmarks --manifest-path=bin/node/cli/Cargo.toml -- benchmark pallet --chain=dev --steps=50 --repeat=20 --pallet=pallet_assets --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --output=./frame/assets/src/weights.rs --template=./.maintain/frame-weight-template.hbs
* more comment output
* add cli for worst case map size
* update name
* clap does not support underscores
* rename
* expose worst case map values
* improve some comments
* cargo run --quiet --profile=production --features=runtime-benchmarks --manifest-path=bin/node/cli/Cargo.toml -- benchmark pallet --chain=dev --steps=50 --repeat=20 --pallet=pallet_assets --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --output=./frame/assets/src/weights.rs --template=./.maintain/frame-weight-template.hbs
* update template
* cargo run --quiet --profile=production --features=runtime-benchmarks --manifest-path=bin/node/cli/Cargo.toml -- benchmark pallet --chain=dev --steps=50 --repeat=20 --pallet=pallet_assets --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --output=./frame/assets/src/weights.rs --template=./.maintain/frame-weight-template.hbs
* fix fmt
* more fmt
* more fmt
* Dont panic when there is no proof
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix test features
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Whitelist :extrinsic_index
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Use whitelist when recording proof
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add logs
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add PoV testing pallet
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Deploy PoV testing pallet
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Storage benches reside in the PoV pallet
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Linear regress PoV per component
Splits the PoV calculation into "measured" and "estimated".
The measured part is reported by the Proof recorder and linear
regressed over all components at once.
The estimated part is calculated as worst-case by using the max
PoV size per storage access and calculating one linear regress per
component. This gives each component a (possibly) independent PoV.
For now the measured size will always be lower than the PoV on
Polkadot since it is measured on an empty snapshot. The measured
part is therefor only used as diagnostic for debugging.
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Put PoV into the weight templates
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* fmt
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Extra alanysis choise for PoV
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add+Fix tests
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Make benches faster
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Cleanup
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Use same template comments
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* ".git/.scripts/bench-bot.sh" pallet dev pallet_balances
* ".git/.scripts/bench-bot.sh" pallet dev pallet_democracy
* Update referenda mock BlockWeights
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Take measured value size into account
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* clippy
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* ".git/.scripts/bench-bot.sh" pallet dev pallet_scheduler
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* proof_size: None
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* ugly, but works
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* wup
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add pov_mode attribute to the benchmarks! macro
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Use pov_mode attribute in PoV benchmarking
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update tests
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Scheduler, Whitelist: Add pov_mode attr
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update PoV weights
* Add CLI arg: default-pov-mode
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix tests
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* fmt
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* fix
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert "Update PoV weights"
This reverts commit 2f3ac2387396470b118122a6ff8fa4ee12216f4b.
* Revert "WIP"
This reverts commit c34b538cd2bc45da4544e887180184e30957904a.
* Revert first approach
This reverts commit range 8ddaa2fffe5930f225a30bee314d0b7c94c344dd^..4c84f8748e5395852a9e0e25b0404953fee1a59e
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Clippy
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add extra benchmarks
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_alliance
* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_whitelist
* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_scheduler
* fmt
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Clippy
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Clippy 🤦
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add reference benchmarks
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix doc comments
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Undo logging
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add 'Ignored' pov_mode
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Allow multiple attributes per benchmark
Turns out that the current benchmarking syntax does not support
multiple attributes per bench 🤦. Changing it to support that
since otherwise the `pov_mode` would conflict with the others.
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Validate pov_mode syntax
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Ignore PoV for all contract benchmarks
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Test
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* test
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Bump macro recursion limit
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* fmt
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update contract weights
They dont have a PoV component anymore.
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* fix test ffs
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* pov_mode is unsupported in V2 syntax
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix pallet ui tests
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* update pallet ui
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix pallet ui tests
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update weights
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Parity Bot <admin@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: command-bot <>
Co-authored-by: Your Name <you@example.com>
* sc-client-db: utils::open_database(...) — return OpenDbError so that the caller could tell the `OpenDbError::DoesNotExist` clearly
* sc-client-db: utils::open_database(..) — accept the `create: bool` argument
* sc-client-db: pruning — optional argument in the DatabaseSettings
* sc-state-db: Split `Error<E>` into separate `Error<E>` and `StateDbError`
* StateDb::open: choose the pruning-mode depending on the requested and stored values
* sc-state-db: test for different combinations of stored and requested pruning-modes
* CLI-argument: mark the unsafe-pruning as deprecated
* Fix tests
* tests: do not specify --pruning when running the substrate over the existing storage
* fix types for benches
* cargo fmt
* Check whether the pruning-mode and sync-mode are compatible
* cargo fmt
* parity-db: 0.3.11 -> 0.3.12
* sc-state-db: MetaDb::set_meta — a better doc-test
* cargo fmt
* make MetaDb read-only again!
* Remove the stray newline (and run the CI once again please)
* Last nitpicks
* A more comprehensive error message
* Store the database in a role specific subdirectory
This is a cleaned up version of #8658 fixing #6880
polkadot companion: paritytech/polkadot#2923
* Disable prometheus in tests
* Also change p2p port
* Fix migration logic
* Use different identification file for rocks and parity db
Add tests for paritydb migration
Remove unneeded dependencies and dev-dependencies.
Made self_destruct test not dependent on wasm bin size.
Updated code related to deprecated warning on tracing-subscriber `scope()`
( See https://github.com/tokio-rs/tracing/issues/1429 )
* implement "auto" database backend in client/db, in progress, #9201
* move fn supports_ref_counting from DatabaseSource enum to Database trait to make it work correctly for all types of dbs
* update kvdb_rocksdb to 0.13 and use it's new config feature to properly auto start existing database
* tests for auto database reopening
* introduce OpenDbError to cleanup opening database error handling and handle case when database is not enabled at the compile time
* cargo fmt strings again
* cargo fmt strings again
* rename DataSettingsSrc to fix test compilation
* fix the call to the new kvdb-rocksdb interdace in tests to fix compilation
* simplify OpenDbError and make it compile even when paritydb and rocksdb are disabled
* cargo fmt
* fix compilation without flag with-parity-db
* fix unused var compilation warning
* support different paths for rocksdb and paritydb in DatabaseSouce::Auto
* support "auto" database option in substrate cli
* enable Lz4 compression for some of the parity-db colums as per review suggestion
* applied review suggestions
* Run cargo fmt on the whole code base
* Second run
* Add CI check
* Fix compilation
* More unnecessary braces
* Handle weights
* Use --all
* Use correct attributes...
* Fix UI tests
* AHHHHHHHHH
* 🤦
* Docs
* Fix compilation
* 🤷
* Please stop
* 🤦 x 2
* More
* make rustfmt.toml consistent with polkadot
Co-authored-by: André Silva <andrerfosilva@gmail.com>
* Simplify some Option / Result / ? operator patterns
When those match a combinator exactly.
Tool-aided by [comby-rust](https://github.com/huitseeker/comby-rust).
* adjust after review
* adjust post-review
* change (ci): docs job optimized; runs every commit; fails on warnings
* change (ci): rename jobs; temporary allow failing
* change (ci): better warnings filtering
* fix (ci): hotfix Docker release
* test (ci): run docs job with flags
* test (ci): pwd fails
* change (ci): pass just //doc dir as an artifact; debug
* change (ci): return to the previous structure; undebug
* change (ci): typo
* rebase on upstream 2
* fix the jobname
* Fix some warnings (#7079)
* Partial fix for transaction priority (#7034)
* Partial fix for priority stuff.
* Small fix
* Fix tests.
* Update frame/transaction-payment/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Better doc
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* What happens if we remove wat? (#7056)
* What happens if we remove wat?
* Update Cargo.lock
* Make SlashingSpans Public (#6961)
* Make SlashingSpans Public
Offchain Applications will often need to inspect this type because it is directly used in staking election, thus worthy of being `pub`. Rest of the slashing api can remain private, only this and the `fn last_non_zero_slash()` of `SlashingSpans` are of interest.
* Update frame/staking/src/lib.rs
* client/authority-discovery/src/service: Improve docs (#7059)
* Decrease poll interval (#7063)
* Remove unused code (#7027)
Signed-off-by: Jimmy Chu <jimmychu0807@gmail.com>
* Disambiguate `BlockNumber` type in `decl_module` (#7061)
* Disambiguate `BlockNumber` type in `decl_module`
* fix `frame-support-tests`
* fix ui tests
* fix trait order
* Implement `FromStr` for `Ss58AddressFormat` (#7068)
* Implement `FromStr` for `Ss58AddressFormat`
* Update primitives/core/src/crypto.rs
Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>
Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>
* Set reserved nodes with offchain worker. (#6996)
* add offchain worker api to set reserved nodes.
* new offchain api to get node public key.
* node public key from converter
* refactor set reserved nodes ocw api.
* new ndoe authorization pallet
* remove unnecessary clone and more.
* more
* tests for node authorization pallet
* remove dependency
* fix build
* more tests.
* refactor
* Update primitives/core/src/offchain/testing.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Update frame/node-authorization/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Update frame/node-authorization/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Update frame/node-authorization/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* format code
* expose NetworkService
* remove NetworkStateInfo in offchain
* replace NodePublicKey with PeerId.
* set max length of peer id.
* clear more
* use BTreeSet for set of peers.
* decode opaque peer id.
* extract NetworkProvider for client offchain.
* use OpaquePeerId in node authorization pallet.
* fix test
* better documentation
* fix test
* doc
* more fix
* Update primitives/core/src/offchain/mod.rs
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update client/offchain/src/api.rs
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* derive serialize and deserialize
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix some warnings
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
Co-authored-by: Sergei Shulepov <sergei@parity.io>
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: s3krit <pugh@s3kr.it>
Co-authored-by: Jimmy Chu <jimmy@parity.io>
Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: kaichao <kaichaosuna@gmail.com>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix more doc errors
* More doc fixes
* Remove subdb to make `rustdoc` happy
* Make the line length check happy
* Fix compilation error
* Another try
* Allow unused
Co-authored-by: Dan Forbes <dan@danforbes.dev>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
Co-authored-by: Sergei Shulepov <sergei@parity.io>
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: s3krit <pugh@s3kr.it>
Co-authored-by: Jimmy Chu <jimmy@parity.io>
Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: kaichao <kaichaosuna@gmail.com>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
* make all features explicit
* Change to -feature suffix to with- prefix
* Add newline at the end of the Cargo.toml file
* Remove rhd feature
* Remove some features from Cargo.toml
* Remove test-helpers feature in tx pool
* Return db_open_error("with-"..
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Rename subdb feature to with-subdb
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Remove 'strict' feature and cfg_attr
* Check for with-subdb feature instead of subdb
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Related to #4776
Related to https://github.com/paritytech/polkadot/pull/832
To summarize the changes:
1. I did not manage to validate with types the service's Configuration. But I did reduce the possibility of errors by moving all the "fill" functions to their respective structopts
2. I split params.rs to multiple modules: one module params for just CLI parameters and one module commands for CLI subcommands (and RunCmd). Every command and params are in their own file so things are grouped better together and easier to remove
3. I removed the run and run_subcommand helpers as they are not helping much anymore. Running a command is always a set of 3 commands: 1. init 2. update config 3. run. This still allow the user to change the config before arguments get parsed or right after.
4. I added tests for all subcommands.
5. [deleted]
Overall the aim is to improve the situation with the Configuration and the optional parameters, add tests, make the API more consistent and simpler.
* Run offchain workers at particular hash, not number.
* Don't run if not new best.
* Don't run if not new best.
* Update client/service/src/builder.rs
Co-Authored-By: Nikolay Volf <nikvolf@gmail.com>
* Update client/service/src/builder.rs
Co-Authored-By: Nikolay Volf <nikvolf@gmail.com>
* Update client/service/src/builder.rs
Co-authored-by: Nikolay Volf <nikvolf@gmail.com>
* Adding script for rename, could be applicable for nodes on top of it, too
* add stderr and gitlab ci features
* apply script
* fix now minor details in expected stderr
* Update the Cargo.lock
* fix name: sc-transaction -> sc-tracing
* fix rename in script, too
* Move transaction pool to primitives
* move backend, errors into primitives
* remove unused client depencies
* Move rpc-api into primitives
* Move peerset back to client
* Move rpc/api back to client, move palette/support/rpc into utils
* move support-rpc into subfolder
* move system-rpc into utils
* move transaction-pool and -graph back into client
* fix broken imports
* Clean up test primitives
* Make support test utils independent of frame
* remove unnecessary node dependencies from service
* Reactivate dependency script:
- only enforce the now achieved status quo will remain
- allow for primitives to depend on /client for now without failing
- more discriptive error message so people understand, what it wants
- minor fix to differentiative between ../client and /client (which may be a subfolder)
- don't allow this to fail anylonger.
* fix doc comment
* 'Should not' rather than 'must not'.
* Revert unwanted dependency changes
* fix faulty import
* fixup derive_more version
* fix wrong import path
* Switch to new rocksdb with some hacks to resolve linking errors
Rocksdb and `wasmtime-environ` both link `zstd`. In the final link step,
this leads to linking errors because of duplicate symbols. The linked
Rocksdb fixes this by using `zstd-sys` as well. However, this currently
also requires modifications in `zstd-sys`. Someone will need to come up
with a better implementation.
* Switch to new version of kvdb-rocksdb
* Update client/db/src/utils.rs
Co-Authored-By: Shawn Tabrizi <shawntabrizi@gmail.com>
* Adding first rough ouline of the repository structure
* Remove old CI stuff
* add title
* formatting fixes
* move node-exits job's script to scripts dir
* Move docs into subdir
* move to bin
* move maintainence scripts, configs and helpers into its own dir
* add .local to ignore
* move core->client
* start up 'test' area
* move test client
* move test runtime
* make test move compile
* Add dependencies rule enforcement.
* Fix indexing.
* Update docs to reflect latest changes
* Moving /srml->/paint
* update docs
* move client/sr-* -> primitives/
* clean old readme
* remove old broken code in rhd
* update lock
* Step 1.
* starting to untangle client
* Fix after merge.
* start splitting out client interfaces
* move children and blockchain interfaces
* Move trie and state-machine to primitives.
* Fix WASM builds.
* fixing broken imports
* more interface moves
* move backend and light to interfaces
* move CallExecutor
* move cli off client
* moving around more interfaces
* re-add consensus crates into the mix
* fix subkey path
* relieve client from executor
* starting to pull out client from grandpa
* move is_decendent_of out of client
* grandpa still depends on client directly
* lemme tests pass
* rename srml->paint
* Make it compile.
* rename interfaces->client-api
* Move keyring to primitives.
* fixup libp2p dep
* fix broken use
* allow dependency enforcement to fail
* move fork-tree
* Moving wasm-builder
* make env
* move build-script-utils
* fixup broken crate depdencies and names
* fix imports for authority discovery
* fix typo
* update cargo.lock
* fixing imports
* Fix paths and add missing crates
* re-add missing crates
Dcompoze