This commit introduces a new concept called `NotificationService` which
allows Polkadot protocols to communicate with the underlying
notification protocol implementation directly, without routing events
through `NetworkWorker`. This implies that each protocol has its own
service which it uses to communicate with remote peers and that each
`NotificationService` is unique with respect to the underlying
notification protocol, meaning `NotificationService` for the transaction
protocol can only be used to send and receive transaction-related
notifications.
The `NotificationService` concept introduces two additional benefits:
* allow protocols to start using custom handshakes
* allow protocols to accept/reject inbound peers
Previously the validation of inbound connections was solely the
responsibility of `ProtocolController`. This caused issues with light
peers and `SyncingEngine` as `ProtocolController` would accept more
peers than `SyncingEngine` could accept which caused peers to have
differing views of their own states. `SyncingEngine` would reject excess
peers but these rejections were not properly communicated to those peers
causing them to assume that they were accepted.
With `NotificationService`, the local handshake is not sent to remote
peer if peer is rejected which allows it to detect that it was rejected.
This commit also deprecates the use of `NetworkEventStream` for all
notification-related events and going forward only DHT events are
provided through `NetworkEventStream`. If protocols wish to follow each
other's events, they must introduce additional abtractions, as is done
for GRANDPA and transactions protocols by following the syncing protocol
through `SyncEventStream`.
Fixes https://github.com/paritytech/polkadot-sdk/issues/512
Fixes https://github.com/paritytech/polkadot-sdk/issues/514
Fixes https://github.com/paritytech/polkadot-sdk/issues/515
Fixes https://github.com/paritytech/polkadot-sdk/issues/554
Fixes https://github.com/paritytech/polkadot-sdk/issues/556
---
These changes are transferred from
https://github.com/paritytech/substrate/pull/14197 but there are no
functional changes compared to that PR
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
This PR moves syncing-related code from `sc-network-common` to
`sc-network-sync`.
Unfortunately, some parts are tightly integrated with networking, so
they were left in `sc-network-common` for now:
1. `SyncMode` in `common/src/sync.rs` (used in `NetworkConfiguration`).
2. `BlockAnnouncesHandshake`, `BlockRequest`, `BlockResponse`, etc. in
`common/src/sync/message.rs` (used in `src/protocol.rs` and
`src/protocol/message.rs`).
More substantial refactoring is needed to decouple syncing and
networking completely, including getting rid of the hardcoded sync
protocol.
## Release notes
Move syncing-related code from `sc-network-common` to `sc-network-sync`.
Delete `ChainSync` trait as it's never used (the only implementation is
accessed directly from `SyncingEngine` and exposes a lot of public
methods that are not part of the trait). Some new trait(s) for syncing
will likely be introduced as part of Sync 2.0 refactoring to represent
syncing strategies.
* client/network: upgrade to libp2p 0.51.0
* make discovery.rs compile
* make peer_info.rs compile
* changes to notifications and request-response proto
* make service.rs compile
* towards making request_responses.rs compile
* make request_responses.rs compile
* make request_responses.rs compile
* fix notifications/behaviour.rs tests
* fix warnings
* remove old code
* allow deprecated code (temporary)
* upgrade to libp2p 0.51.1
* add TODO for behaviour tests
* return empty vec if peer_id is absent
https://github.com/paritytech/substrate/pull/13587#discussion_r1141695167
fyi: I don't really know what the old behaviour was.
* update comment to reflect new defaults
Closes#13338
* Revert "update comment to reflect new defaults"
This reverts commit 7a981abd69308e9d522ec94905f181439a1b1dba.
* remove config.rs (from wrong merge)
* upgrade to libp2p 0.51.2
* fix formatting
* use handle_pending_outbound_connection in networt_state RPC
* update deps
* use re-exports when we use other libp2p packages
* Apply suggestions from code review
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* format code
* handle potential errors in network_state RPC
* only update libp2p crate
* update libp2p-core
* fix docs
* use libp2p-identity instead of libp2p
where it's possible. libp2p-identity is much smaller, hence makes sense
to use it instead of larger libp2p crate.
* Update client/network/src/discovery.rs
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
* update Cargo.lock
* add comment for per_connection_event_buffer_size
current value is somewhat arbitrary and needs to be tweaked depending on
memory usage and network worker sleep stats.
* fix link format
* update Cargo.lock
* upgrade to libp2p 0.51.3
* deprecate mplex
* Revert "deprecate mplex"
This reverts commit 9e25820e706e464a0e962a8604861fcb2a7641eb.
* Revert "upgrade to libp2p 0.51.3"
This reverts commit 6544dd4138e2f89517bd7c7281fc78a638ec7040.
* use new libp2p version in `statement` crate
* pin version temporarily
* libp2p 0.51.3
* deprecate mplex
* deprecate legacy noise handshake
* fix build error
* update libp2p-identity
* enable libp2p-identity:ed25519 feature in sc-consensus
* enable ed25519 for peerset as well
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
Co-authored-by: parity-processbot <>
* Attempt to relieve pressure on `mpsc_network_worker`
`SyncingEngine` interacting with `NetworkWorker` can put a lot of strain
on the channel if the number of inbound connections is high. This is
because `SyncingEngine` is notified of each inbound substream which it
then can either accept or reject and this causes a lot of message
exchange on the already busy channel.
Use a direct channel pair between `Protocol` and `SyncingEngine`
to exchange notification events. It is a temporary change to alleviate
the problems caused by syncing being an independent protocol and the
fix will be removed once `NotificationService` is implemented.
* Apply review comments
* fixes
* trigger ci
* Fix tests
Verify that both peers have a connection now that the validation goes
through `SyncingEngine`. Depending on how the tasks are scheduled,
one of them might not have the peer registered in `SyncingEngine` at which
point the test won't make any progress because block announcement received
from an unknown peer is discarded.
Move polling of `ChainSync` at the end of the function so that if a block
announcement causes a block request to be sent, that can be sent in the
same call to `SyncingEngine::poll()`.
---------
Co-authored-by: parity-processbot <>
* Move service tests to `client/network/tests`
These tests depend on `sc-network` and `sc-network-sync` so they should
live outside the crate.
* Move some configs from `sc-network-common` to `sc-network`
* Move `NetworkService` traits to `sc-network`
* Move request-responses to `sc-network`
* Remove more stuff
* Remove rest of configs from `sc-network-common` to `sc-network`
* Remove more stuff
* Fix warnings
* Update client/network/src/request_responses.rs
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Fix cargo doc
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Move import queue out of `sc-network`
Add supplementary asynchronous API for the import queue which means
it can be run as an independent task and communicated with through
the `ImportQueueService`.
This commit removes removes block and justification imports from
`sc-network` and provides `ChainSync` with a handle to import queue so
it can import blocks and justifications. Polling of the import queue is
moved complete out of `sc-network` and `sc_consensus::Link` is
implemented for `ChainSyncInterfaceHandled` so the import queue
can still influence the syncing process.
* Move stuff to SyncingEngine
* Move `ChainSync` instanation to `SyncingEngine`
Some of the tests have to be rewritten
* Move peer hashmap to `SyncingEngine`
* Let `SyncingEngine` to implement `ChainSyncInterface`
* Introduce `SyncStatusProvider`
* Move `sync_peer_(connected|disconnected)` to `SyncingEngine`
* Implement `SyncEventStream`
Remove `SyncConnected`/`SyncDisconnected` events from
`NetworkEvenStream` and provide those events through
`ChainSyncInterface` instead.
Modify BEEFY/GRANDPA/transactions protocol and `NetworkGossip` to take
`SyncEventStream` object which they listen to for incoming sync peer
events.
* Introduce `ChainSyncInterface`
This interface provides a set of miscellaneous functions that other
subsystems can use to query, for example, the syncing status.
* Move event stream polling to `SyncingEngine`
Subscribe to `NetworkStreamEvent` and poll the incoming notifications
and substream events from `SyncingEngine`.
The code needs refactoring.
* Make `SyncingEngine` into an asynchronous runner
This commits removes the last hard dependency of syncing from
`sc-network` meaning the protocol now lives completely outside of
`sc-network`, ignoring the hardcoded peerset entry which will be
addressed in the future.
Code needs a lot of refactoring.
* Fix warnings
* Code refactoring
* Use `SyncingService` for BEEFY
* Use `SyncingService` for GRANDPA
* Remove call delegation from `NetworkService`
* Remove `ChainSyncService`
* Remove `ChainSync` service tests
They were written for the sole purpose of verifying that `NetworWorker`
continues to function while the calls are being dispatched to
`ChainSync`.
* Refactor code
* Refactor code
* Update client/finality-grandpa/src/communication/tests.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Fix warnings
* Apply review comments
* Fix docs
* Fix test
* cargo-fmt
* Update client/network/sync/src/engine.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Update client/network/sync/src/engine.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Add missing docs
* Refactor code
---------
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Change copyright year to 2023 from 2022
* Fix incorrect update of copyright year
* Remove years from copy right header
* Fix remaining files
* Fix typo in a header and remove update-copyright.sh
* Move import queue out of `sc-network`
Add supplementary asynchronous API for the import queue which means
it can be run as an independent task and communicated with through
the `ImportQueueService`.
This commit removes removes block and justification imports from
`sc-network` and provides `ChainSync` with a handle to import queue so
it can import blocks and justifications. Polling of the import queue is
moved complete out of `sc-network` and `sc_consensus::Link` is
implemented for `ChainSyncInterfaceHandled` so the import queue
can still influence the syncing process.
* Fix tests
* Apply review comments
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* Update client/network/sync/src/lib.rs
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Bastian Köcher <git@kchr.de>
* Introduce `ChainSyncInterface`
`ChainSyncInterface` provides an asynchronous interface for other
subsystems to submit calls to `ChainSync`. This allows `NetworkService`
to delegate calls to `ChainSync` while still providing the same API
for other subsystems (for now). This makes it possible to move the
syncing code in piecemeal fashion out of `protocol.rs` as the calls
are just forwarded to `ChainSync`.
* Apply review comments
* Fix tests
* Introduce `sc-network-bitswap`
Move the bitswap protocol out of `sc-network` to its own crate.
* Improve test coverage
* Remove mention of bitswap from `sc-network`
* Fix documentation
* Fix clippy and remove the void dependency
* Remove unneeded trait bound and bump prost to 0.11
* Add ProtocolName custom type
* Use new ProtocolName in sc_network_common
* Use new ProtocolName in sc_network
* Use new ProtocolName for BEEFY and GRANDPA
* Use new ProtocolName for notifications
* Use new ProtocolName in sc_network (part 2)
* Use new ProtocolName in sc_network_gossip
* Use new ProtocolName in sc_offchain
* Remove unused imports
* Some more fixes
* Add tests
* Fix minor import issues
* Re-export ProtocolName in sc_network
* Revert "Re-export ProtocolName in sc_network"
This reverts commit 8d8ff71927e7750757f29c9bbd88dc0ba181d214.
* Re-export ProtocolName in sc_network
* Remove dependency on sc-network-common from beefy-gadget
* Extract `NetworkKVProvider` trait in `sc-authority-discovery` and remove unnecessary dependency
* Extract `NetworkSyncForkRequest` trait in `sc-finality-grandpa`
* Relax requirements on `SyncOracle` trait, remove extra native methods from `NetworkService` that are already provided by trait impls
* Move `NetworkSigner` trait from `sc-authority-discovery` into `sc-network-common` and de-duplicate methods on `NetworkService`
* Move `NetworkKVProvider` trait from `sc-authority-discovery` into `sc-network-common` and de-duplicate methods on `NetworkService`
* Minimize `sc-authority-discovery` dependency on `sc-network`
* Move `NetworkSyncForkRequest` trait from `sc-finality-grandpa` to `sc-network-common` and de-duplicate methods in `NetworkService`
* Extract `NetworkStatusProvider` trait and de-duplicate methods on `NetworkService`
* Extract `NetworkPeers` trait and de-duplicate methods on `NetworkService`
* Extract `NetworkEventStream` trait and de-duplicate methods on `NetworkService`
* Move more methods from `NetworkService` into `NetworkPeers` trait
* Move `NetworkStateInfo` trait into `sc-network-common`
* Extract `NetworkNotification` trait and de-duplicate methods on `NetworkService`
* Extract `NetworkRequest` trait and de-duplicate methods on `NetworkService`
* Remove `NetworkService::local_peer_id()`, it is already provided by `NetworkStateInfo` impl
* Extract `NetworkTransaction` trait and de-duplicate methods on `NetworkService`
* Extract `NetworkBlock` trait and de-duplicate methods on `NetworkService`
* Remove dependencies on `NetworkService` from most of the methods of `sc-service`
* Address simple review comments
* Remove direct dependency of `sc-network` on `sc-network-light`
* Move `WarpSyncProvider` trait and surrounding data structures into `sc-network-common`
* Move `WarpSyncProvider` trait and surrounding data structures into `sc-network-common`
* Create `sync` module in `sc-network-common`, create `ChainSync` trait there (not used yet), move a bunch of associated data structures from `sc-network-sync`
* Switch from concrete implementation to `ChainSync` trait from `sc-network-common`
* Introduce `OpaqueStateRequest`/`OpaqueStateResponse` to remove generics from `StateSync` trait
* Introduce `OpaqueBlockRequest`/`OpaqueBlockResponse`, make `scheme` module of `sc-network-sync` private
* Surface `sc-network-sync` into `sc-service` and make `sc-network` not depend on it anymore
* Remove now unnecessary dependency from `sc-network`
* Replace crate links with just text since dependencies are gone now
* Remove `warp_sync` re-export from `sc-network-common`
* Update copyright in network-related files
* Address review comments about documentation
* Apply review suggestion
* Rename `extra_requests` module to `metrics`
Co-authored-by: Bastian Köcher <info@kchr.de>
* Move `api.v1.proto` schema into new crate `sc-network-sync`
* Move `sc_network::protocol::sync::state` module into `sc_network_sync::state`
* Move `sc_network::protocol::sync::blocks` module into `sc_network_sync::blocks` and some data structures from `sc_network::protocol::message` module into `sc_network_sync::message`
* Move some data structures from `sc_network::config` and `sc_network::request_responses` into new `sc-network-common` crate
* Move `sc_network::protocol::sync::warm` and `sc_network::warp_request_handler` modules into `sc_network_sync`
* Move `client/network/sync/src/lib.rs` to `client/network/sync/src/lib_old.rs` to preserve history of changes of the file in the next commit
* Move `client/network/src/protocol/sync.rs` on top of `client/network/sync/src/lib.rs` to preserve history of changes
* Move `sc_network::protocol::sync` to `sc_network_sync` with submodules, move message data structures around accordingly
* Move `sc_network::block_request_handler` to `sc_network_sync::block_request_handler`
* Move `sc_network::state_request_handler` to `sc_network_sync::state_request_handler`
* Add re-exports for compatibility reasons
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Remove unnecessary imports, move one internal re-export into where it is actually used, make one import explicit
* Move a few data structures down into modules
* Use generic parameters in `sc-network` instead of `chain::Client` trait
* Remove unnecessary bound
* Consolidating test and production code
* Signing/verifying authority discovery records with PeerId
Unsigned records cannot be rejected yet, they just produce
a warning in the log.
* Upgrading to libp2p 0.40
* libp2p::identity and sp_core::crypto Ed25519 are compatible
* Rejecting authority records unsigned by peer id can be configured
* Fixes based on review comments
* No command-line argument needed
* info was still too much spam in the logs
* Added tests for both strict and loose validation
* Fixing based on review comments
* Pierre preferred a signing method
* Ooops, I need to slow down
* Update bin/node/cli/src/service.rs
* Reexport libp2p crypto used in sc-network
* Added proto3 compatibility tests. And import noise.
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Run cargo fmt on the whole code base
* Second run
* Add CI check
* Fix compilation
* More unnecessary braces
* Handle weights
* Use --all
* Use correct attributes...
* Fix UI tests
* AHHHHHHHHH
* 🤦
* Docs
* Fix compilation
* 🤷
* Please stop
* 🤦 x 2
* More
* make rustfmt.toml consistent with polkadot
Co-authored-by: André Silva <andrerfosilva@gmail.com>
* client/network: Re-enable light_client_handler.rs unit tests
* client/network: Add scaffolding for light client using req-resp
* client/network: Make it compile
* client/network: Rename OutEvent SendRequest
* client/network: Restructure light client request client and handler
* client/network: Rename light client request client to sender
* client/network: Remove light client prepare_request
* client/network/src/light: Rework configuration
* client/network: Formatting
* client/network/light: Remove RequestId
* client/network/light: Make request functions methods
* client/network/light: Refactor request wrapping
* client/network/light: Fix warnings
* client/network/light: Serialize request in method
* client/network/light: Make returning response a method
* client/network/light: Depend on request response to timeout requests
* client/network: Fix test compilation
* client/network/light: Re-enable connection test
* client/network/light: Re-enable timeout test
* client/network/light: Re-enable incorrect_response test
* client/network/light: Re-enable wrong_response_type test
* client/network/light: Re-enable retry_count_failures test
* client/network/light: Re-enable issue_request tests
* client/network/light: Re-enable send_receive tests
* client/network/light: Deduplicate test logic
* client/network/light: Remove unused imports
* client/network/light: Handle request failure
* client/network/light: Move generate_protocol_config
* client/network: Fix test compilation
* client/network: Rename light client request client to sender
* client/network: Handle too-many-requests error
* client/network: Update outdated comments
* client/network/light: Choose any peer if none has best block defined
* .maintain: Replace sentry-node with local-docker-test-network
Sentry nodes are deprecated. Thus there is no need for
`.maintain/sentry-node` to spin up a sentry node test environment.
Instead this commit rewrites the setup to contain two full-connected
validators and one light client.
With the steps below one can now spin up a local test network with
two validators, one light-client, Prometheus and Grafana.
- cargo build --release
- sudo docker-compose -f .maintain/local-docker-test-network/docker-compose.yml up
* client/network/light: Handle oneshot cancellation
* client/network/light: Do not reduce retry count on missing peer
* client/network/request-response: Assert in debug request id to be unique
* client/network/light: Choose same limit as block request protocol
* client/network: Report reputation changes via response
Allow request response protocol handlers to issue reputation changes, by
sending them back along with the response payload.
* client/network: Remove resolved TODOs
* Remove sc_network::NetworkService::register_notifications_protocol
* Missing calls to .into()
* Wrong crate name
* [WIP] Fix Grandpa tests
* One more passing
* One more. Two to go.
* This one was actually already passing 🎉
* Last one compiles
* Progress
* grandpa: fix voter_persists_its_votes test
* Restore other tests
* Try spawn future later
Co-authored-by: André Silva <andrerfosilva@gmail.com>
* change (ci): docs job optimized; runs every commit; fails on warnings
* change (ci): rename jobs; temporary allow failing
* change (ci): better warnings filtering
* fix (ci): hotfix Docker release
* test (ci): run docs job with flags
* test (ci): pwd fails
* change (ci): pass just //doc dir as an artifact; debug
* change (ci): return to the previous structure; undebug
* change (ci): typo
* rebase on upstream 2
* fix the jobname
* Fix some warnings (#7079)
* Partial fix for transaction priority (#7034)
* Partial fix for priority stuff.
* Small fix
* Fix tests.
* Update frame/transaction-payment/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Better doc
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* What happens if we remove wat? (#7056)
* What happens if we remove wat?
* Update Cargo.lock
* Make SlashingSpans Public (#6961)
* Make SlashingSpans Public
Offchain Applications will often need to inspect this type because it is directly used in staking election, thus worthy of being `pub`. Rest of the slashing api can remain private, only this and the `fn last_non_zero_slash()` of `SlashingSpans` are of interest.
* Update frame/staking/src/lib.rs
* client/authority-discovery/src/service: Improve docs (#7059)
* Decrease poll interval (#7063)
* Remove unused code (#7027)
Signed-off-by: Jimmy Chu <jimmychu0807@gmail.com>
* Disambiguate `BlockNumber` type in `decl_module` (#7061)
* Disambiguate `BlockNumber` type in `decl_module`
* fix `frame-support-tests`
* fix ui tests
* fix trait order
* Implement `FromStr` for `Ss58AddressFormat` (#7068)
* Implement `FromStr` for `Ss58AddressFormat`
* Update primitives/core/src/crypto.rs
Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>
Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>
* Set reserved nodes with offchain worker. (#6996)
* add offchain worker api to set reserved nodes.
* new offchain api to get node public key.
* node public key from converter
* refactor set reserved nodes ocw api.
* new ndoe authorization pallet
* remove unnecessary clone and more.
* more
* tests for node authorization pallet
* remove dependency
* fix build
* more tests.
* refactor
* Update primitives/core/src/offchain/testing.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Update frame/node-authorization/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Update frame/node-authorization/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Update frame/node-authorization/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* format code
* expose NetworkService
* remove NetworkStateInfo in offchain
* replace NodePublicKey with PeerId.
* set max length of peer id.
* clear more
* use BTreeSet for set of peers.
* decode opaque peer id.
* extract NetworkProvider for client offchain.
* use OpaquePeerId in node authorization pallet.
* fix test
* better documentation
* fix test
* doc
* more fix
* Update primitives/core/src/offchain/mod.rs
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update client/offchain/src/api.rs
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* derive serialize and deserialize
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix some warnings
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
Co-authored-by: Sergei Shulepov <sergei@parity.io>
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: s3krit <pugh@s3kr.it>
Co-authored-by: Jimmy Chu <jimmy@parity.io>
Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: kaichao <kaichaosuna@gmail.com>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix more doc errors
* More doc fixes
* Remove subdb to make `rustdoc` happy
* Make the line length check happy
* Fix compilation error
* Another try
* Allow unused
Co-authored-by: Dan Forbes <dan@danforbes.dev>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
Co-authored-by: Sergei Shulepov <sergei@parity.io>
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: s3krit <pugh@s3kr.it>
Co-authored-by: Jimmy Chu <jimmy@parity.io>
Co-authored-by: Shawn Tabrizi <shawntabrizi@gmail.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: kaichao <kaichaosuna@gmail.com>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
* Implement request-responses protocols
* Add tests
* Fix sc-cli
* Apply suggestions from code review
Co-authored-by: Max Inden <mail@max-inden.de>
* Fix naming
* Fix other issues
* Other naming fix
* Fix error logging
* Max sizes to u64
* Don't kill connections on refusal to process
* Adjust comment
Co-authored-by: Max Inden <mail@max-inden.de>
* Update to libp2p-0.23.
Thereby incorporate bandwidth measurement along the
lines previously done by libp2p itself.
* Tweak dependencies for wasm32 compilation.
For wasm32 we need to enable unstable features to
make `task::Builder::local` available.
* Simplify dependencies.
* Simplify.
Leave the calculation of bytes sent/received per second
to the outer layers of the code, subject to their own
individual update intervals.
* Cleanup
* Re-add lost dev dependency.
* Avoid division by zero.
* Remove redundant metric.
* Enable sending of noise legacy handshakes.
* Add comment about monotonic gauge.
* CI
Information retrieved via `DebugInfoBehaviour` is not only used for
debugging purposes, e.g. disconnecting from nodes not responding to
pings, using external addresses retrieved via indentify, ...
In order for the name to reflect the usage of the module this commit
renames it.
Aaro Altonen