- Adds a test to check the correct digest for Snowbridge outbound
messages. For the correct digest to be in the block, the the
MessageQueue pallet should be configured after the EthereumOutbound
queue pallet. The added test fails if the EthereumOutbound is configured
after the MessageQueue pallet.
- Adds a helper method `run_to_block_with_finalize` to simulate the
block finalizing. The existing `run_to_block` method does not finalize
and so it cannot successfully test this condition.
Closes: https://github.com/paritytech/polkadot-sdk/issues/3208
---------
Co-authored-by: claravanstaden <Cats 4 life!>
## TODO
- [x] change constants when CI fails (should fail :) )
## Result
On the AssetHubRococo: 1701175800126 -> 1700929825257 = 0.15 %
decreased.
```
# Before ( [xcm] Fix `SovereignPaidRemoteExporter` and `DepositAsset` handling (#3157))
Feb 02 12:59:05.520 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1701175800126 for runtime: statemine-1006000 (statemine-0.tx14.au1)
# After
Feb 02 13:02:40.647 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1700929825257 for runtime: statemine-1006000 (statemine-0.tx14.au1)
```
On the AssetHubWestend: 2116038876326 -> 1641718372993 = 22.4 %
decreased.
```
# Before ( [xcm] Fix `SovereignPaidRemoteExporter` and `DepositAsset` handling (#3157))
Feb 02 12:56:00.880 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 2116038876326 for runtime: westmint-1006000 (westmint-0.tx14.au1)
# After
Feb 02 13:04:42.515 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1641718372993 for runtime: westmint-1006000 (westmint-0.tx14.au1)
```
This PR addresses two issues:
- It modifies `DepositAsset`'s asset filter from `All` to
`AllCounted(1)` to prevent potentially charging excessive weight/fees.
This adjustment avoids situations where fees could be calculated based
on the count of assets, as illustrated
[here](https://github.com/paritytech/polkadot-sdk/blob/master/cumulus/parachains/runtimes/bridge-hubs/bridge-hub-rococo/src/weights/xcm/mod.rs#L38-L46).
- It encapsulates `DepositAsset` with `SetAppendix` to ensure that
`fees` are not trapped in any case. For instance, this prevents issues
when `ExportXcm::validate` encounters an error during the processing of
`ExportMessage`.
- Prepares for the Deneb hardfork on Sepolia testnet on 31 January
(needs to be deployed to Rococo before then)
- Removes `beacon-minimal-spec` flag for simpler config
- Adds test comments
---------
Co-authored-by: Ron <yrong1997@gmail.com>
Co-authored-by: claravanstaden <Cats 4 life!>
Co-authored-by: Alistair Singh <alistair.singh7@gmail.com>
# Note for reviewer
Most changes are just syntax changes necessary for the new version.
Most important files should be the ones under the `xcm` folder.
# Description
Added XCMv4.
## Removed `Multi` prefix
The following types have been renamed:
- MultiLocation -> Location
- MultiAsset -> Asset
- MultiAssets -> Assets
- InteriorMultiLocation -> InteriorLocation
- MultiAssetFilter -> AssetFilter
- VersionedMultiAsset -> VersionedAsset
- WildMultiAsset -> WildAsset
- VersionedMultiLocation -> VersionedLocation
In order to fix a name conflict, the `Assets` in `xcm-executor` were
renamed to `HoldingAssets`, as they represent assets in holding.
## Removed `Abstract` asset id
It was not being used anywhere and this simplifies the code.
Now assets are just constructed as follows:
```rust
let asset: Asset = (AssetId(Location::new(1, Here)), 100u128).into();
```
No need for specifying `Concrete` anymore.
## Outcome is now a named fields struct
Instead of
```rust
pub enum Outcome {
Complete(Weight),
Incomplete(Weight, Error),
Error(Error),
}
```
we now have
```rust
pub enum Outcome {
Complete { used: Weight },
Incomplete { used: Weight, error: Error },
Error { error: Error },
}
```
## Added Reanchorable trait
Now both locations and assets implement this trait, making it easier to
reanchor both.
## New syntax for building locations and junctions
Now junctions are built using the following methods:
```rust
let location = Location {
parents: 1,
interior: [Parachain(1000), PalletInstance(50), GeneralIndex(1984)].into()
};
```
or
```rust
let location = Location::new(1, [Parachain(1000), PalletInstance(50), GeneralIndex(1984)]);
```
And they are matched like so:
```rust
match location.unpack() {
(1, [Parachain(id)]) => ...
(0, Here) => ...,
(1, [_]) => ...,
}
```
This syntax is mandatory in v4, and has been also implemented for v2 and
v3 for easier migration.
This was needed to make all sizes smaller.
# TODO
- [x] Scaffold v4
- [x] Port github.com/paritytech/polkadot/pull/7236
- [x] Remove `Multi` prefix
- [x] Remove `Abstract` asset id
---------
Co-authored-by: command-bot <>
Co-authored-by: Keith Yeung <kungfukeith11@gmail.com>
This PR adds possibility for relay chain governance to halt and resume
bridge pallets using XCM calls. Following calls are enabled over XCM for
the `root` origin: `pallet_bridge_grandpa::set_operating_mode`,
`pallet_bridge_parachains::set_operating_mode` and
`pallet_bridge_messages::set_operating_mode`.
So far the `bridge-hub-test-utils` contained a tests set for testing
BridgeHub runtime that is bridging with the remote **parachain**. But we
have https://github.com/paritytech/polkadot-sdk/pull/2540 coming, which
would add Rococo <> Bulletin chain bridge (where Bulletin = standalone
chain that is using GRANDPA finality). Then it'll be expanded to
Polkadot BH as well.
So this PR adds the same set of tests to the `bridge-hub-test-utils`,
but for the case when remote chain is the chain with GRANDPA finality.
There's a lot of changes in this PR - I'll describe some:
- I've added `BasicParachainRuntime` trait to decrease number of lines
we need to add to `where` clause. Could revert, but imo it is useful;
- `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is
a submodule for generating test data for the test sets.
`from_parachain.rs` is used in tests for the case when remote chain is a
parachain, `from_grandpa_chain.rs` - for the bridges with remote GRANDPA
chains. `mod.rs` has some code, shared by both types of tests;
- `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is
a submodule with all test cases. The `mod.rs` has tests, suitable for
all cases. There's also `wth_parachain.rs` and `with_grandpa_chain.rs`
with the same meaning as above;
- I've merged the "core" code of two previous tests -
`relayed_incoming_message_works` and `complex_relay_extrinsic_works`
into one single `relayed_incoming_message_works` test. So now we are
always constructing extrinsics and are dispatching them using executive
module (meaning all signed extensions are also tested).
New test set is used here:
https://github.com/paritytech/polkadot-sdk/pull/2540. Once this PR is
merged, I'll merge that other PR with master to remove duplicate
changes.
I'm also planning to cleanup generic constraints + remove some
unnecessary assumptions about used chains in a follow-up PRs. But for
now I think this PR has enough changes, so don't want to complicate it
even more.
---
Breaking changes for the code that have used those tests before:
- the `construct_and_apply_extrinsic` callback now accepts the
`RuntimeCall` instead of the `pallet_utility::Call`;
- the `construct_and_apply_extrinsic` now may be called multiple times
for the single test, so make sure the `frame_system::CheckNonce` is
correctly constructed;
- all previous tests have been moved from
`bridge_hub_test_utils::test_cases` to
`bridge_hub_test_utils::test_cases::from_parachain` module;
- there are several changes in test arguments - please refer to
https://github.com/paritytech/polkadot-sdk/compare/sv-tests-for-bridge-with-remote-grandpa-chain?expand=1#diff-79a28d4d3e1749050341c2424f00c4c139825b1a20937767f83e58b95166735c
for details.
Clara van Staden