mirror of
https://github.com/pezkuwichain/pezkuwi-subxt.git
synced 2026-11-17 16:16:09 +00:00
[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P networking library. It supports all of the features of `rust-libp2p` that are currently being utilized by Polkadot SDK. Compared to `rust-libp2p`, `litep2p` has a quite different architecture which is why the new `litep2p` network backend is only able to use a little of the existing code in `sc-network`. The design has been mainly influenced by how we'd wish to structure our networking-related code in Polkadot SDK: independent higher-levels protocols directly communicating with the network over links that support bidirectional backpressure. A good example would be `NotificationHandle`/`RequestResponseHandle` abstractions which allow, e.g., `SyncingEngine` to directly communicate with peers to announce/request blocks. I've tried running `polkadot --network-backend litep2p` with a few different peer configurations and there is a noticeable reduction in networking CPU usage. For high load (`--out-peers 200`), networking CPU usage goes down from ~110% to ~30% (80 pp) and for normal load (`--out-peers 40`), the usage goes down from ~55% to ~18% (37 pp). These should not be taken as final numbers because: a) there are still some low-hanging optimization fruits, such as enabling [receive window auto-tuning](https://github.com/libp2p/rust-yamux/pull/176), integrating `Peerset` more closely with `litep2p` or improving memory usage of the WebSocket transport b) fixing bugs/instabilities that incorrectly cause `litep2p` to do less work will increase the networking CPU usage c) verification in a more diverse set of tests/conditions is needed Nevertheless, these numbers should give an early estimate for CPU usage of the new networking backend. This PR consists of three separate changes: * introduce a generic `PeerId` (wrapper around `Multihash`) so that we don't have use `NetworkService::PeerId` in every part of the code that uses a `PeerId` * introduce `NetworkBackend` trait, implement it for the libp2p network stack and make Polkadot SDK generic over `NetworkBackend` * implement `NetworkBackend` for litep2p The new library should be considered experimental which is why `rust-libp2p` will remain as the default option for the time being. This PR currently depends on the master branch of `litep2p` but I'll cut a new release for the library once all review comments have been addresses. --------- Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io> Co-authored-by: Dmitry Markin <dmitry@markin.tech> Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com> Co-authored-by: Alexandru Vasile <alexandru.vasile@parity.io>
161 lines
6.2 KiB
Rust
161 lines
6.2 KiB
Rust
// This file is part of Substrate.
|
|
|
|
// Copyright (C) Parity Technologies (UK) Ltd.
|
|
// SPDX-License-Identifier: GPL-3.0-or-later WITH Classpath-exception-2.0
|
|
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
|
|
// You should have received a copy of the GNU General Public License
|
|
// along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
|
|
//! Communication streams for the BEEFY networking protocols.
|
|
|
|
pub mod notification;
|
|
pub mod request_response;
|
|
|
|
pub(crate) mod gossip;
|
|
pub(crate) mod peers;
|
|
|
|
pub(crate) mod beefy_protocol_name {
|
|
use array_bytes::bytes2hex;
|
|
use sc_network::ProtocolName;
|
|
|
|
/// BEEFY votes gossip protocol name suffix.
|
|
const GOSSIP_NAME: &str = "/beefy/2";
|
|
/// BEEFY justifications protocol name suffix.
|
|
const JUSTIFICATIONS_NAME: &str = "/beefy/justifications/1";
|
|
|
|
/// Name of the votes gossip protocol used by BEEFY.
|
|
///
|
|
/// Must be registered towards the networking in order for BEEFY voter to properly function.
|
|
pub fn gossip_protocol_name<Hash: AsRef<[u8]>>(
|
|
genesis_hash: Hash,
|
|
fork_id: Option<&str>,
|
|
) -> ProtocolName {
|
|
let genesis_hash = genesis_hash.as_ref();
|
|
if let Some(fork_id) = fork_id {
|
|
format!("/{}/{}{}", bytes2hex("", genesis_hash), fork_id, GOSSIP_NAME).into()
|
|
} else {
|
|
format!("/{}{}", bytes2hex("", genesis_hash), GOSSIP_NAME).into()
|
|
}
|
|
}
|
|
|
|
/// Name of the BEEFY justifications request-response protocol.
|
|
pub fn justifications_protocol_name<Hash: AsRef<[u8]>>(
|
|
genesis_hash: Hash,
|
|
fork_id: Option<&str>,
|
|
) -> ProtocolName {
|
|
let genesis_hash = genesis_hash.as_ref();
|
|
if let Some(fork_id) = fork_id {
|
|
format!("/{}/{}{}", bytes2hex("", genesis_hash), fork_id, JUSTIFICATIONS_NAME).into()
|
|
} else {
|
|
format!("/{}{}", bytes2hex("", genesis_hash), JUSTIFICATIONS_NAME).into()
|
|
}
|
|
}
|
|
}
|
|
|
|
/// Returns the configuration value to put in
|
|
/// [`sc_network::config::FullNetworkConfiguration`].
|
|
/// For standard protocol name see [`beefy_protocol_name::gossip_protocol_name`].
|
|
pub fn beefy_peers_set_config<
|
|
B: sp_runtime::traits::Block,
|
|
N: sc_network::NetworkBackend<B, <B as sp_runtime::traits::Block>::Hash>,
|
|
>(
|
|
gossip_protocol_name: sc_network::ProtocolName,
|
|
metrics: sc_network::service::NotificationMetrics,
|
|
peer_store_handle: std::sync::Arc<dyn sc_network::peer_store::PeerStoreProvider>,
|
|
) -> (N::NotificationProtocolConfig, Box<dyn sc_network::NotificationService>) {
|
|
let (cfg, notification_service) = N::notification_config(
|
|
gossip_protocol_name,
|
|
Vec::new(),
|
|
1024 * 1024,
|
|
None,
|
|
sc_network::config::SetConfig {
|
|
in_peers: 25,
|
|
out_peers: 25,
|
|
reserved_nodes: Vec::new(),
|
|
non_reserved_mode: sc_network::config::NonReservedPeerMode::Accept,
|
|
},
|
|
metrics,
|
|
peer_store_handle,
|
|
);
|
|
(cfg, notification_service)
|
|
}
|
|
|
|
// cost scalars for reporting peers.
|
|
mod cost {
|
|
use sc_network::ReputationChange as Rep;
|
|
// Message that's for an outdated round.
|
|
pub(super) const OUTDATED_MESSAGE: Rep = Rep::new(-50, "BEEFY: Past message");
|
|
// Message that's from the future relative to our current set-id.
|
|
pub(super) const FUTURE_MESSAGE: Rep = Rep::new(-100, "BEEFY: Future message");
|
|
// Vote message containing bad signature.
|
|
pub(super) const BAD_SIGNATURE: Rep = Rep::new(-100, "BEEFY: Bad signature");
|
|
// Message received with vote from voter not in validator set.
|
|
pub(super) const UNKNOWN_VOTER: Rep = Rep::new(-150, "BEEFY: Unknown voter");
|
|
// Message containing invalid proof.
|
|
pub(super) const INVALID_PROOF: Rep = Rep::new(-5000, "BEEFY: Invalid commit");
|
|
// Reputation cost per signature checked for invalid proof.
|
|
pub(super) const PER_SIGNATURE_CHECKED: i32 = -25;
|
|
// Reputation cost per byte for un-decodable message.
|
|
pub(super) const PER_UNDECODABLE_BYTE: i32 = -5;
|
|
// On-demand request was refused by peer.
|
|
pub(super) const REFUSAL_RESPONSE: Rep = Rep::new(-100, "BEEFY: Proof request refused");
|
|
// On-demand request for a proof that can't be found in the backend.
|
|
pub(super) const UNKNOWN_PROOF_REQUEST: Rep = Rep::new(-150, "BEEFY: Unknown proof request");
|
|
}
|
|
|
|
// benefit scalars for reporting peers.
|
|
mod benefit {
|
|
use sc_network::ReputationChange as Rep;
|
|
pub(super) const VOTE_MESSAGE: Rep = Rep::new(100, "BEEFY: Round vote message");
|
|
pub(super) const NOT_INTERESTED: Rep = Rep::new(10, "BEEFY: Not interested in round");
|
|
pub(super) const VALIDATED_PROOF: Rep = Rep::new(100, "BEEFY: Justification");
|
|
}
|
|
|
|
#[cfg(test)]
|
|
mod tests {
|
|
use super::*;
|
|
|
|
use sp_core::H256;
|
|
|
|
#[test]
|
|
fn beefy_protocols_names() {
|
|
use beefy_protocol_name::{gossip_protocol_name, justifications_protocol_name};
|
|
// Create protocol name using random genesis hash.
|
|
let genesis_hash = H256::random();
|
|
let genesis_hex = array_bytes::bytes2hex("", genesis_hash);
|
|
|
|
let expected_gossip_name = format!("/{}/beefy/2", genesis_hex);
|
|
let gossip_proto_name = gossip_protocol_name(&genesis_hash, None);
|
|
assert_eq!(gossip_proto_name.to_string(), expected_gossip_name);
|
|
|
|
let expected_justif_name = format!("/{}/beefy/justifications/1", genesis_hex);
|
|
let justif_proto_name = justifications_protocol_name(&genesis_hash, None);
|
|
assert_eq!(justif_proto_name.to_string(), expected_justif_name);
|
|
|
|
// Create protocol name using hardcoded genesis hash. Verify exact representation.
|
|
let genesis_hash = [
|
|
50, 4, 60, 123, 58, 106, 216, 246, 194, 188, 139, 193, 33, 212, 202, 171, 9, 55, 123,
|
|
94, 8, 43, 12, 251, 187, 57, 173, 19, 188, 74, 205, 147,
|
|
];
|
|
let genesis_hex = "32043c7b3a6ad8f6c2bc8bc121d4caab09377b5e082b0cfbbb39ad13bc4acd93";
|
|
|
|
let expected_gossip_name = format!("/{}/beefy/2", genesis_hex);
|
|
let gossip_proto_name = gossip_protocol_name(&genesis_hash, None);
|
|
assert_eq!(gossip_proto_name.to_string(), expected_gossip_name);
|
|
|
|
let expected_justif_name = format!("/{}/beefy/justifications/1", genesis_hex);
|
|
let justif_proto_name = justifications_protocol_name(&genesis_hash, None);
|
|
assert_eq!(justif_proto_name.to_string(), expected_justif_name);
|
|
}
|
|
}
|