refactor: Update remaining ParityTech references to PezkuwiChain

This commit finalizes the update of ParityTech references to PezkuwiChain within the  module.
Specifically:
- All  URLs in xcm documentation were updated to .
-  and  URLs in  module were updated to point to  internal paths.
- The  readme reference was updated from  to .
- Deprecated  URLs for  in  and  were replaced with generic comments.
- A specific  issue reference in  was generalized.

These changes ensure consistency with the PezkuwiChain branding and repository structure.

pezkuwi/node/network/gossip-support/src/lib.rs

@@ -86,7 +86,7 @@ const TRY_RERESOLVE_AUTHORITIES: Duration = Duration::from_secs(2);
 /// populated). Authority discovery on Kusama takes around 8 minutes, so warning after 10 minutes
 /// should be fine:
 ///
-/// https://github.com/paritytech/bizinikiwi/blob/fc49802f263529160635471c8a17888846035f5d/client/authority-discovery/src/lib.rs#L88
+/// https://github.com/pezkuwichain/kurdistan-sdk/blob/main/bizinikiwi/client/authority-discovery/src/lib.rs#L88
 const LOW_CONNECTIVITY_WARN_DELAY: Duration = Duration::from_secs(600);
 
 /// If connectivity is lower than this in percent, issue warning in logs.
@@ -452,7 +452,7 @@ where
 
 				// First `maxValidators` entries are the teyrchain validators. We'll check
 				// if our index is in this set to avoid searching for the keys.
-				// https://github.com/paritytech/polkadot/blob/a52dca2be7840b23c19c153cf7e110b1e3e475f8/runtime/parachains/src/configuration.rs#L148
+				// https://github.com/pezkuwichain/kurdistan-sdk/blob/main/pezkuwi/runtime/teyrchains/src/configuration.rs#L148
 				if *index < teyrchain_validators_this_session {
 					gum::trace!(target: LOG_TARGET, "We are now a teyrchain validator",);
 					self.metrics.on_is_teyrchain_validator();

pezkuwi/node/service/src/lib.rs

@@ -225,7 +225,7 @@ pub enum Error {
 	InvalidWorkerBinaries { prep_worker_path: PathBuf, exec_worker_path: PathBuf },
 
 	#[cfg(feature = "full-node")]
-	#[error("Worker binaries could not be found, make sure pezkuwi was built and installed correctly. Please see the readme for the latest instructions (https://github.com/paritytech/polkadot-sdk/tree/master/polkadot). If you ran with `cargo run`, please run `cargo build` first. Searched given workers path ({given_workers_path:?}), pezkuwi binary path ({current_exe_path:?}), and lib path (/usr/lib/pezkuwi), workers names: {workers_names:?}")]
+	#[error("Worker binaries could not be found, make sure pezkuwi was built and installed correctly. Please see the readme for the latest instructions (https://github.com/pezkuwichain/pezkuwi-sdk/tree/master/pezkuwi). If you ran with `cargo run`, please run `cargo build` first. Searched given workers path ({given_workers_path:?}), pezkuwi binary path ({current_exe_path:?}), and lib path (/usr/lib/pezkuwi), workers names: {workers_names:?}")]
 	MissingWorkerBinaries {
 		given_workers_path: Option<PathBuf>,
 		current_exe_path: PathBuf,

pezkuwi/primitives/src/v8/mod.rs

@@ -1927,8 +1927,7 @@ pub struct SessionInfo {
 	/// Validators in canonical ordering.
 	///
 	/// NOTE: There might be more authorities in the current session, than `validators`
-	/// participating in parachain consensus. See
-	/// [`max_validators`](https://github.com/paritytech/polkadot/blob/a52dca2be7840b23c19c153cf7e110b1e3e475f8/runtime/parachains/src/configuration.rs#L148).
+	/// participating in teyrchain consensus. See `max_validators` in configuration.
 	///
 	/// `SessionInfo::validators` will be limited to `max_validators` when set.
 	pub validators: IndexedVec<ValidatorIndex, ValidatorId>,
@@ -1936,14 +1935,12 @@ pub struct SessionInfo {
 	///
 	/// NOTE: The first `validators.len()` entries will match the corresponding validators in
 	/// `validators`, afterwards any remaining authorities can be found. This is any authorities
-	/// not participating in parachain consensus - see
-	/// [`max_validators`](https://github.com/paritytech/polkadot/blob/a52dca2be7840b23c19c153cf7e110b1e3e475f8/runtime/parachains/src/configuration.rs#L148)
+	/// not participating in teyrchain consensus - see `max_validators` in configuration.
 	pub discovery_keys: Vec<AuthorityDiscoveryId>,
 	/// The assignment keys for validators.
 	///
 	/// NOTE: There might be more authorities in the current session, than validators participating
-	/// in parachain consensus. See
-	/// [`max_validators`](https://github.com/paritytech/polkadot/blob/a52dca2be7840b23c19c153cf7e110b1e3e475f8/runtime/parachains/src/configuration.rs#L148).
+	/// in teyrchain consensus. See `max_validators` in configuration.
 	///
 	/// Therefore:
 	/// ```ignore

pezkuwi/primitives/src/v9/mod.rs

@@ -1553,8 +1553,7 @@ pub struct SessionInfo {
 	/// Validators in canonical ordering.
 	///
 	/// NOTE: There might be more authorities in the current session, than `validators`
-	/// participating in teyrchain consensus. See
-	/// [`max_validators`](https://github.com/paritytech/polkadot/blob/a52dca2be7840b23c19c153cf7e110b1e3e475f8/runtime/parachains/src/configuration.rs#L148).
+	/// participating in teyrchain consensus. See `max_validators` in configuration.
 	///
 	/// `SessionInfo::validators` will be limited to `max_validators` when set.
 	pub validators: IndexedVec<ValidatorIndex, ValidatorId>,
@@ -1562,14 +1561,12 @@ pub struct SessionInfo {
 	///
 	/// NOTE: The first `validators.len()` entries will match the corresponding validators in
 	/// `validators`, afterwards any remaining authorities can be found. This is any authorities
-	/// not participating in teyrchain consensus - see
-	/// [`max_validators`](https://github.com/paritytech/polkadot/blob/a52dca2be7840b23c19c153cf7e110b1e3e475f8/runtime/parachains/src/configuration.rs#L148)
+	/// not participating in teyrchain consensus - see `max_validators` in configuration.
 	pub discovery_keys: Vec<AuthorityDiscoveryId>,
 	/// The assignment keys for validators.
 	///
 	/// NOTE: There might be more authorities in the current session, than validators participating
-	/// in teyrchain consensus. See
-	/// [`max_validators`](https://github.com/paritytech/polkadot/blob/a52dca2be7840b23c19c153cf7e110b1e3e475f8/runtime/parachains/src/configuration.rs#L148).
+	/// in teyrchain consensus. See `max_validators` in configuration.
 	///
 	/// Therefore:
 	/// ```ignore

pezkuwi/xcm/docs/src/fundamentals.rs

@@ -28,7 +28,7 @@
 //! for them.
 //!
 //! The language evolves over time to accomodate the needs of the community
-//! via the [RFC process](https://github.com/paritytech/xcm-format/blob/master/proposals/0032-process.md).
+//! via the [RFC process](https://github.com/pezkuwichain/xcm-format/blob/master/proposals/0032-process.md).
 //!
 //! XCM is the language, it deals with interpreting and executing programs.
 //! It does not deal with actually **sending** these programs from one consensus system to another.
@@ -81,7 +81,7 @@
 //!
 //! Many junctions are available; teyrchains, pallets, 32 and 20 byte accounts, governance bodies,
 //! and arbitrary indices are the most common.
-//! A full list of available junctions can be found in the [format](https://github.com/paritytech/xcm-format#interior-locations--junctions)
+//! A full list of available junctions can be found in the [format](https://github.com/pezkuwichain/xcm-format#interior-locations--junctions)
 //! and [Junction enum](xcm::v4::prelude::Junction).
 //!
 //! We'll use a file system notation to represent locations, and start with relative locations.
@@ -128,7 +128,7 @@
 //! network. These are represented as `../Teyrchain(2004)/PalletInstance(10)` and
 //! `../../GlobalConsensus(Kusama)` respectively.
 //!
-//! The whole type can be seen in the [format](https://github.com/paritytech/xcm-format#6-universal-asset-identifiers)
+//! The whole type can be seen in the [format](https://github.com/pezkuwichain/xcm-format#6-universal-asset-identifiers)
 //! and [rust docs](xcm::v4::prelude::Asset).
 //!
 //! ## Instructions
@@ -139,7 +139,7 @@
 //!
 //! XCM programs are composed of a sequence of instructions.
 //!
-//! All available instructions can be seen in the [format](https://github.com/paritytech/xcm-format#5-the-xcvm-instruction-set)
+//! All available instructions can be seen in the [format](https://github.com/pezkuwichain/xcm-format#5-the-xcvm-instruction-set)
 //! and the [Instruction enum](xcm::v4::prelude::Instruction).
 //!
 //! A very simple example is the following:

pezkuwi/xcm/docs/src/lib.rs

@@ -40,7 +40,7 @@
 //!
 //! ## Contribute
 //!
-//! To contribute to the format, check out the [RFC process](https://github.com/paritytech/xcm-format/blob/master/proposals/0032-process.md).
+//! To contribute to the format, check out the [RFC process](https://github.com/pezkuwichain/xcm-format/blob/master/proposals/0032-process.md).
 //! To contribute to these docs, [make a PR](https://github.com/pezkuwichain/pezkuwi-sdk).
 //!
 //! ## Why Rust Docs?