Implements a variable deposit base calculation for EPM signed submissions (#1547)

**Note**: This is a lift-and-shift PR from the old substrate and
polkadot repos, both PRs have been reviewed and audited
(https://github.com/paritytech/substrate/pull/13983,
https://github.com/paritytech/polkadot/pull/7140)

---

This PR implements a generic `BaseDeposit` calculation for signed
submissions, based on the size of the submission queue.

It adds a new associated type to EPM's config, `type SignedDepositBase`,
that implements `Convert<usize, BalanceOf<T>>`, which is used to
calculate the base deposit for signed submissions based on the size of
the signed submissions queue.

`struct GeometricDepositBase<Balance, Fixed, Inc>` implements the
convert trait so that the deposit value increases as a geometric
progression. The deposit base is calculated by `deposit_base =
fixed_deposit_base * (1 + increase_factor)^n`, where `n` is the term of
the progression (i.e. the number of signed submissions in the queue).
`Fixed` and `Inc` generic params are getters for `Balance` and
`IncreaseFactor` to compute the geometric progression. If
`IncreaseFactor = 0`, then the signed deposit is constant and equal to
`Fixed` regardless of the size of the queue.

### Runtime configs

In Kusama, the progression with 10% increase without changing the
current signed fixed deposit is: (term == size of the queue)

Term 1: `1,333,333,332,000`
Term 2: `1,333,333,332,000 * 1.10 = 1,466,666,665,200`
Term 3: `1,333,333,332,000 * 1.10^2 = 1,613,333,331,200`
Term 4: `1,333,333,332,000 * 1.10^3 = 1,774,666,664,320`
Term 5: `1,333,333,332,000 * 1.10^4 = 1,952,133,330,752`
Term 6: `1,333,333,332,000 * 1.10^5 = 2,147,346,663,827.20`
Term 7: `1,333,333,332,000 * 1.10^6 = 2,362,081,330,210.92`
Term 8: `1,333,333,332,000 * 1.10^7 = 2,598,289,463,231.01`
Term 9: `1,333,333,332,000 * 1.10^8 = 2,858,118,409,554.11`
Term 10: `1,333,333,332,000 * 1.10^9 = 3,143,930,250,509.52`

Westend:

Term 1: `2,000,000,000,000`
Term 2: `2,000,000,000,000 * 1.10 = 2,200,000,000,000`
Term 3: `2,000,000,000,000 * 1.10^2 = 2,420,000,000,000`
Term 4: `2,000,000,000,000 * 1.10^3 = 2,662,000,000,000`
Term 5: `2,000,000,000,000 * 1.10^4 = 2,928,200,000,000`
Term 6: `2,000,000,000,000 * 1.10^5 = 3,221,020,000,000`
Term 7: `2,000,000,000,000 * 1.10^6 = 3,543,122,000,000`
Term 8: `2,000,000,000,000 * 1.10^7 = 3,897,434,200,000`
Term 9: `2,000,000,000,000 * 1.10^8 = 4,287,177,620,000`
Term 10: `2,000,000,000,000 * 1.10^9 = 4,715,895,382,000`

and in Polkadot, the deposit increase is disabled in the current state
of the PR, as the increase factor is 0% -- so nothing changes from the
current behaviour.

Closes https://github.com/paritytech-secops/srlabs_findings/issues/189

polkadot/runtime/kusama/src/lib.rs

@@ -93,7 +93,7 @@ use xcm::latest::Junction;
 
 pub use frame_system::Call as SystemCall;
 pub use pallet_balances::Call as BalancesCall;
-pub use pallet_election_provider_multi_phase::Call as EPMCall;
+pub use pallet_election_provider_multi_phase::{Call as EPMCall, GeometricDepositBase};
 #[cfg(feature = "std")]
 pub use pallet_staking::StakerStatus;
 use pallet_staking::UseValidatorsMap;
@@ -511,7 +511,8 @@ parameter_types! {
 	// signed config
 	pub const SignedMaxSubmissions: u32 = 16;
 	pub const SignedMaxRefunds: u32 = 16 / 4;
-	pub const SignedDepositBase: Balance = deposit(2, 0);
+	pub const SignedFixedDeposit: Balance = deposit(2, 0);
+	pub const SignedDepositIncreaseFactor: Percent = Percent::from_percent(10);
 	pub const SignedDepositByte: Balance = deposit(0, 10) / 1024;
 	// Each good submission will get 1/10 KSM as reward
 	pub SignedRewardBase: Balance =  UNITS / 10;
@@ -584,7 +585,8 @@ impl pallet_election_provider_multi_phase::Config for Runtime {
 	type SignedMaxSubmissions = SignedMaxSubmissions;
 	type SignedMaxRefunds = SignedMaxRefunds;
 	type SignedRewardBase = SignedRewardBase;
-	type SignedDepositBase = SignedDepositBase;
+	type SignedDepositBase =
+		GeometricDepositBase<Balance, SignedFixedDeposit, SignedDepositIncreaseFactor>;
 	type SignedDepositByte = SignedDepositByte;
 	type SignedDepositWeight = ();
 	type SignedMaxWeight =
@@ -2484,7 +2486,7 @@ mod fees_tests {
 	fn signed_deposit_is_sensible() {
 		// ensure this number does not change, or that it is checked after each change.
 		// a 1 MB solution should need around 0.16 KSM deposit
-		let deposit = SignedDepositBase::get() + (SignedDepositByte::get() * 1024 * 1024);
+		let deposit = SignedFixedDeposit::get() + (SignedDepositByte::get() * 1024 * 1024);
 		assert_eq_error_rate!(deposit, UNITS * 167 / 100, UNITS / 100);
 	}
 }

polkadot/runtime/polkadot/src/lib.rs

@@ -90,7 +90,7 @@ use xcm::latest::Junction;
 
 pub use frame_system::Call as SystemCall;
 pub use pallet_balances::Call as BalancesCall;
-pub use pallet_election_provider_multi_phase::Call as EPMCall;
+pub use pallet_election_provider_multi_phase::{Call as EPMCall, GeometricDepositBase};
 #[cfg(feature = "std")]
 pub use pallet_staking::StakerStatus;
 use pallet_staking::UseValidatorsMap;
@@ -382,6 +382,8 @@ parameter_types! {
 	// signed config
 	pub const SignedMaxSubmissions: u32 = 16;
 	pub const SignedMaxRefunds: u32 = 16 / 4;
+	pub const SignedFixedDeposit: Balance = deposit(2, 0);
+	pub const SignedDepositIncreaseFactor: Percent = Percent::from_percent(10);
 	// 40 DOTs fixed deposit..
 	pub const SignedDepositBase: Balance = deposit(2, 0);
 	// 0.01 DOT per KB of solution data.
@@ -456,7 +458,8 @@ impl pallet_election_provider_multi_phase::Config for Runtime {
 	type SignedMaxSubmissions = SignedMaxSubmissions;
 	type SignedMaxRefunds = SignedMaxRefunds;
 	type SignedRewardBase = SignedRewardBase;
-	type SignedDepositBase = SignedDepositBase;
+	type SignedDepositBase =
+		GeometricDepositBase<Balance, SignedFixedDeposit, SignedDepositIncreaseFactor>;
 	type SignedDepositByte = SignedDepositByte;
 	type SignedDepositWeight = ();
 	type SignedMaxWeight =
@@ -2352,7 +2355,7 @@ mod test_fees {
 	fn signed_deposit_is_sensible() {
 		// ensure this number does not change, or that it is checked after each change.
 		// a 1 MB solution should take (40 + 10) DOTs of deposit.
-		let deposit = SignedDepositBase::get() + (SignedDepositByte::get() * 1024 * 1024);
+		let deposit = SignedFixedDeposit::get() + (SignedDepositByte::get() * 1024 * 1024);
 		assert_eq_error_rate!(deposit, 50 * DOLLARS, DOLLARS);
 	}
 }

polkadot/runtime/westend/src/lib.rs

@@ -79,7 +79,7 @@ use sp_runtime::{
 		Keccak256, OpaqueKeys, SaturatedConversion, Verify,
 	},
 	transaction_validity::{TransactionPriority, TransactionSource, TransactionValidity},
-	ApplyExtrinsicResult, FixedU128, KeyTypeId, Perbill,
+	ApplyExtrinsicResult, FixedU128, KeyTypeId, Perbill, Percent,
 };
 use sp_staking::SessionIndex;
 use sp_std::{collections::btree_map::BTreeMap, prelude::*};
@@ -90,7 +90,7 @@ use xcm::latest::Junction;
 
 pub use frame_system::Call as SystemCall;
 pub use pallet_balances::Call as BalancesCall;
-pub use pallet_election_provider_multi_phase::Call as EPMCall;
+pub use pallet_election_provider_multi_phase::{Call as EPMCall, GeometricDepositBase};
 #[cfg(feature = "std")]
 pub use pallet_staking::StakerStatus;
 use pallet_staking::UseValidatorsMap;
@@ -481,7 +481,8 @@ parameter_types! {
 	// signed config
 	pub const SignedMaxSubmissions: u32 = 128;
 	pub const SignedMaxRefunds: u32 = 128 / 4;
-	pub const SignedDepositBase: Balance = deposit(2, 0);
+	pub const SignedFixedDeposit: Balance = deposit(2, 0);
+	pub const SignedDepositIncreaseFactor: Percent = Percent::from_percent(10);
 	pub const SignedDepositByte: Balance = deposit(0, 10) / 1024;
 	// Each good submission will get 1 WND as reward
 	pub SignedRewardBase: Balance = 1 * UNITS;
@@ -553,7 +554,8 @@ impl pallet_election_provider_multi_phase::Config for Runtime {
 	type SignedMaxSubmissions = SignedMaxSubmissions;
 	type SignedMaxRefunds = SignedMaxRefunds;
 	type SignedRewardBase = SignedRewardBase;
-	type SignedDepositBase = SignedDepositBase;
+	type SignedDepositBase =
+		GeometricDepositBase<Balance, SignedFixedDeposit, SignedDepositIncreaseFactor>;
 	type SignedDepositByte = SignedDepositByte;
 	type SignedDepositWeight = ();
 	type SignedMaxWeight =

substrate/bin/node/runtime/src/lib.rs

@@ -58,7 +58,7 @@ pub use node_primitives::{AccountId, Signature};
 use node_primitives::{AccountIndex, Balance, BlockNumber, Hash, Moment, Nonce};
 use pallet_asset_conversion::{NativeOrAssetId, NativeOrAssetIdConverter};
 use pallet_broker::{CoreAssignment, CoreIndex, CoretimeInterface, PartsOf57600};
-use pallet_election_provider_multi_phase::SolutionAccuracyOf;
+use pallet_election_provider_multi_phase::{GeometricDepositBase, SolutionAccuracyOf};
 use pallet_im_online::sr25519::AuthorityId as ImOnlineId;
 use pallet_nfts::PalletFeatures;
 use pallet_nis::WithMaximumOf;
@@ -694,7 +694,8 @@ parameter_types! {
 
 	// signed config
 	pub const SignedRewardBase: Balance = 1 * DOLLARS;
-	pub const SignedDepositBase: Balance = 1 * DOLLARS;
+	pub const SignedFixedDeposit: Balance = 1 * DOLLARS;
+	pub const SignedDepositIncreaseFactor: Percent = Percent::from_percent(10);
 	pub const SignedDepositByte: Balance = 1 * CENTS;
 
 	pub BetterUnsignedThreshold: Perbill = Perbill::from_rational(1u32, 10_000);
@@ -822,7 +823,8 @@ impl pallet_election_provider_multi_phase::Config for Runtime {
 	type MinerConfig = Self;
 	type SignedMaxSubmissions = ConstU32<10>;
 	type SignedRewardBase = SignedRewardBase;
-	type SignedDepositBase = SignedDepositBase;
+	type SignedDepositBase =
+		GeometricDepositBase<Balance, SignedFixedDeposit, SignedDepositIncreaseFactor>;
 	type SignedDepositByte = SignedDepositByte;
 	type SignedMaxRefunds = ConstU32<3>;
 	type SignedDepositWeight = ();

substrate/frame/election-provider-multi-phase/src/lib.rs

@@ -279,8 +279,8 @@ use unsigned::VoterOf;
 pub use weights::WeightInfo;
 
 pub use signed::{
-	BalanceOf, NegativeImbalanceOf, PositiveImbalanceOf, SignedSubmission, SignedSubmissionOf,
-	SignedSubmissions, SubmissionIndicesOf,
+	BalanceOf, GeometricDepositBase, NegativeImbalanceOf, PositiveImbalanceOf, SignedSubmission,
+	SignedSubmissionOf, SignedSubmissions, SubmissionIndicesOf,
 };
 pub use unsigned::{Miner, MinerConfig};
 
@@ -572,6 +572,7 @@ pub mod pallet {
 	use frame_election_provider_support::{InstantElectionProvider, NposSolver};
 	use frame_support::{pallet_prelude::*, traits::EstimateCallFee};
 	use frame_system::pallet_prelude::*;
+	use sp_runtime::traits::Convert;
 
 	#[pallet::config]
 	pub trait Config: frame_system::Config + SendTransactionTypes<Call<Self>> {
@@ -649,10 +650,6 @@ pub mod pallet {
 		#[pallet::constant]
 		type SignedRewardBase: Get<BalanceOf<Self>>;
 
-		/// Base deposit for a signed solution.
-		#[pallet::constant]
-		type SignedDepositBase: Get<BalanceOf<Self>>;
-
 		/// Per-byte deposit for a signed solution.
 		#[pallet::constant]
 		type SignedDepositByte: Get<BalanceOf<Self>>;
@@ -668,6 +665,10 @@ pub mod pallet {
 		#[pallet::constant]
 		type MaxWinners: Get<u32>;
 
+		/// Something that calculates the signed deposit base based on the signed submissions queue
+		/// size.
+		type SignedDepositBase: Convert<usize, BalanceOf<Self>>;
+
 		/// The maximum number of electing voters and electable targets to put in the snapshot.
 		/// At the moment, snapshots are only over a single block, but once multi-block elections
 		/// are introduced they will take place over multiple blocks.

substrate/frame/election-provider-multi-phase/src/mock.rs

@@ -16,7 +16,7 @@
 // limitations under the License.
 
 use super::*;
-use crate::{self as multi_phase, unsigned::MinerConfig};
+use crate::{self as multi_phase, signed::GeometricDepositBase, unsigned::MinerConfig};
 use frame_election_provider_support::{
 	bounds::{DataProviderBounds, ElectionBounds},
 	data_provider, onchain, ElectionDataProvider, NposSolution, SequentialPhragmen,
@@ -44,8 +44,8 @@ use sp_npos_elections::{
 use sp_runtime::{
 	bounded_vec,
 	testing::Header,
-	traits::{BlakeTwo256, IdentityLookup},
-	BuildStorage, PerU16,
+	traits::{BlakeTwo256, Convert, IdentityLookup},
+	BuildStorage, PerU16, Percent,
 };
 use std::sync::Arc;
 
@@ -283,7 +283,11 @@ parameter_types! {
 	pub static UnsignedPhase: BlockNumber = 5;
 	pub static SignedMaxSubmissions: u32 = 5;
 	pub static SignedMaxRefunds: u32 = 1;
-	pub static SignedDepositBase: Balance = 5;
+	// for tests only. if `EnableVariableDepositBase` is true, the deposit base will be calculated
+	// by `Multiphase::DepositBase`. Otherwise the deposit base is `SignedFixedDeposit`.
+	pub static EnableVariableDepositBase: bool = false;
+	pub static SignedFixedDeposit: Balance = 5;
+	pub static SignedDepositIncreaseFactor: Percent = Percent::from_percent(10);
 	pub static SignedDepositByte: Balance = 0;
 	pub static SignedDepositWeight: Balance = 0;
 	pub static SignedRewardBase: Balance = 7;
@@ -393,7 +397,7 @@ impl crate::Config for Runtime {
 	type OffchainRepeat = OffchainRepeat;
 	type MinerTxPriority = MinerTxPriority;
 	type SignedRewardBase = SignedRewardBase;
-	type SignedDepositBase = SignedDepositBase;
+	type SignedDepositBase = Self;
 	type SignedDepositByte = ();
 	type SignedDepositWeight = ();
 	type SignedMaxWeight = SignedMaxWeight;
@@ -414,6 +418,18 @@ impl crate::Config for Runtime {
 	type ElectionBounds = ElectionsBounds;
 }
 
+impl Convert<usize, BalanceOf<Runtime>> for Runtime {
+	/// returns the geometric increase deposit fee if `EnableVariableDepositBase` is set, otherwise
+	/// the fee is `SignedFixedDeposit`.
+	fn convert(queue_len: usize) -> Balance {
+		if !EnableVariableDepositBase::get() {
+			SignedFixedDeposit::get()
+		} else {
+			GeometricDepositBase::<Balance, SignedFixedDeposit, SignedDepositIncreaseFactor>::convert(queue_len)
+		}
+	}
+}
+
 impl<LocalCall> frame_system::offchain::SendTransactionTypes<LocalCall> for Runtime
 where
 	RuntimeCall: From<LocalCall>,
@@ -553,8 +569,14 @@ impl ExtBuilder {
 		<SignedMaxSubmissions>::set(count);
 		self
 	}
+	pub fn signed_base_deposit(self, base: u64, variable: bool, increase: Percent) -> Self {
+		<EnableVariableDepositBase>::set(variable);
+		<SignedFixedDeposit>::set(base);
+		<SignedDepositIncreaseFactor>::set(increase);
+		self
+	}
 	pub fn signed_deposit(self, base: u64, byte: u64, weight: u64) -> Self {
-		<SignedDepositBase>::set(base);
+		<SignedFixedDeposit>::set(base);
 		<SignedDepositByte>::set(byte);
 		<SignedDepositWeight>::set(weight);
 		self

substrate/frame/election-provider-multi-phase/src/signed.rs

@@ -17,6 +17,8 @@
 
 //! The signed phase implementation.
 
+use core::marker::PhantomData;
+
 use crate::{
 	unsigned::MinerConfig, Config, ElectionCompute, Pallet, QueuedSolution, RawSolution,
 	ReadySolution, SignedSubmissionIndices, SignedSubmissionNextIndex, SignedSubmissionsMap,
@@ -32,8 +34,8 @@ use sp_arithmetic::traits::SaturatedConversion;
 use sp_core::bounded::BoundedVec;
 use sp_npos_elections::ElectionScore;
 use sp_runtime::{
-	traits::{Saturating, Zero},
-	RuntimeDebug,
+	traits::{Convert, Saturating, Zero},
+	FixedPointNumber, FixedPointOperand, FixedU128, Percent, RuntimeDebug,
 };
 use sp_std::{
 	cmp::Ordering,
@@ -348,6 +350,32 @@ impl<T: Config> SignedSubmissions<T> {
 	}
 }
 
+/// Type that can be used to calculate the deposit base for signed submissions.
+///
+/// The deposit base is calculated as a geometric progression based on the number of signed
+/// submissions in the queue. The size of the queue represents the progression term.
+pub struct GeometricDepositBase<Balance, Fixed, Inc> {
+	_marker: (PhantomData<Balance>, PhantomData<Fixed>, PhantomData<Inc>),
+}
+
+impl<Balance, Fixed, Inc> Convert<usize, Balance> for GeometricDepositBase<Balance, Fixed, Inc>
+where
+	Balance: FixedPointOperand,
+	Fixed: Get<Balance>,
+	Inc: Get<Percent>,
+{
+	// Calculates the base deposit as a geometric progression based on the number of signed
+	// submissions.
+	//
+	// The nth term is obtained by calculating `base * (1 + increase_factor)^nth`. Example: factor
+	// 5, with initial deposit of 1000 and 10% of increase factor is 1000 * (1 + 0.1)^5.
+	fn convert(queue_len: usize) -> Balance {
+		let increase_factor: FixedU128 = FixedU128::from_u32(1) + Inc::get().into();
+
+		increase_factor.saturating_pow(queue_len).saturating_mul_int(Fixed::get())
+	}
+}
+
 impl<T: Config> Pallet<T> {
 	/// `Self` accessor for `SignedSubmission<T>`.
 	pub fn signed_submissions() -> SignedSubmissions<T> {
@@ -520,14 +548,14 @@ impl<T: Config> Pallet<T> {
 		size: SolutionOrSnapshotSize,
 	) -> BalanceOf<T> {
 		let encoded_len: u32 = raw_solution.encoded_size().saturated_into();
-		let encoded_len: BalanceOf<T> = encoded_len.into();
+		let encoded_len_balance: BalanceOf<T> = encoded_len.into();
 		let feasibility_weight = Self::solution_weight_of(raw_solution, size);
 
-		let len_deposit = T::SignedDepositByte::get().saturating_mul(encoded_len);
+		let len_deposit = T::SignedDepositByte::get().saturating_mul(encoded_len_balance);
 		let weight_deposit = T::SignedDepositWeight::get()
 			.saturating_mul(feasibility_weight.ref_time().saturated_into());
 
-		T::SignedDepositBase::get()
+		T::SignedDepositBase::convert(Self::signed_submissions().len())
 			.saturating_add(len_deposit)
 			.saturating_add(weight_deposit)
 	}
@@ -541,6 +569,7 @@ mod tests {
 		Phase,
 	};
 	use frame_support::{assert_noop, assert_ok, assert_storage_noop};
+	use sp_runtime::Percent;
 
 	#[test]
 	fn cannot_submit_too_early() {
@@ -779,6 +808,56 @@ mod tests {
 		})
 	}
 
+	#[test]
+	fn geometric_deposit_queue_size_works() {
+		let constant = vec![1000; 10];
+		// geometric progression with 10% increase in each iteration for 10 terms.
+		let progression_10 = vec![1000, 1100, 1210, 1331, 1464, 1610, 1771, 1948, 2143, 2357];
+		let progression_40 = vec![1000, 1400, 1960, 2744, 3841, 5378, 7529, 10541, 14757, 20661];
+
+		let check_progressive_base_fee = |expected: &Vec<u64>| {
+			for s in 0..SignedMaxSubmissions::get() {
+				let account = 99 + s as u64;
+				Balances::make_free_balance_be(&account, 10000000);
+				let mut solution = raw_solution();
+				solution.score.minimal_stake -= s as u128;
+
+				assert_ok!(MultiPhase::submit(RuntimeOrigin::signed(account), Box::new(solution)));
+				assert_eq!(balances(&account).1, expected[s as usize])
+			}
+		};
+
+		ExtBuilder::default()
+			.signed_max_submission(10)
+			.signed_base_deposit(1000, true, Percent::from_percent(0))
+			.build_and_execute(|| {
+				roll_to_signed();
+				assert!(MultiPhase::current_phase().is_signed());
+
+				check_progressive_base_fee(&constant);
+			});
+
+		ExtBuilder::default()
+			.signed_max_submission(10)
+			.signed_base_deposit(1000, true, Percent::from_percent(10))
+			.build_and_execute(|| {
+				roll_to_signed();
+				assert!(MultiPhase::current_phase().is_signed());
+
+				check_progressive_base_fee(&progression_10);
+			});
+
+		ExtBuilder::default()
+			.signed_max_submission(10)
+			.signed_base_deposit(1000, true, Percent::from_percent(40))
+			.build_and_execute(|| {
+				roll_to_signed();
+				assert!(MultiPhase::current_phase().is_signed());
+
+				check_progressive_base_fee(&progression_40);
+			});
+	}
+
 	#[test]
 	fn call_fee_refund_is_limited_by_signed_max_refunds() {
 		ExtBuilder::default().build_and_execute(|| {

substrate/frame/election-provider-multi-phase/test-staking-e2e/src/mock.rs

@@ -32,7 +32,7 @@ use sp_runtime::{
 	},
 	testing,
 	traits::Zero,
-	transaction_validity, BuildStorage, PerU16, Perbill,
+	transaction_validity, BuildStorage, PerU16, Perbill, Percent,
 };
 use sp_staking::{
 	offence::{DisableStrategy, OffenceDetails, OnOffenceHandler},
@@ -47,7 +47,8 @@ use frame_election_provider_support::{
 	SequentialPhragmen, Weight,
 };
 use pallet_election_provider_multi_phase::{
-	unsigned::MinerConfig, Call, ElectionCompute, QueuedSolution, SolutionAccuracyOf,
+	unsigned::MinerConfig, Call, ElectionCompute, GeometricDepositBase, QueuedSolution,
+	SolutionAccuracyOf,
 };
 use pallet_staking::StakerStatus;
 use parking_lot::RwLock;
@@ -182,6 +183,9 @@ parameter_types! {
 	pub static TransactionPriority: transaction_validity::TransactionPriority = 1;
 	#[derive(Debug)]
 	pub static MaxWinners: u32 = 100;
+	pub static MaxVotesPerVoter: u32 = 16;
+	pub static SignedFixedDeposit: Balance = 1;
+	pub static SignedDepositIncreaseFactor: Percent = Percent::from_percent(10);
 	pub static ElectionBounds: frame_election_provider_support::bounds::ElectionBounds = ElectionBoundsBuilder::default()
 		.voters_count(1_000.into()).targets_count(1_000.into()).build();
 }
@@ -199,7 +203,8 @@ impl pallet_election_provider_multi_phase::Config for Runtime {
 	type MinerConfig = Self;
 	type SignedMaxSubmissions = ConstU32<10>;
 	type SignedRewardBase = ();
-	type SignedDepositBase = ();
+	type SignedDepositBase =
+		GeometricDepositBase<Balance, SignedFixedDeposit, SignedDepositIncreaseFactor>;
 	type SignedDepositByte = ();
 	type SignedMaxRefunds = ConstU32<3>;
 	type SignedDepositWeight = ();