We currently use a bit of a hack in `.cargo/config` to make sure that
clippy isn't too annoying by specifying the list of lints.
There is now a stable way to define lints for a workspace. The only down
side is that every crate seems to have to opt into this so there's a
*few* files modified in this PR.
Dependencies:
- [x] PR that upgrades CI to use rust 1.74 is merged.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
So far the `bridge-hub-test-utils` contained a tests set for testing
BridgeHub runtime that is bridging with the remote **parachain**. But we
have https://github.com/paritytech/polkadot-sdk/pull/2540 coming, which
would add Rococo <> Bulletin chain bridge (where Bulletin = standalone
chain that is using GRANDPA finality). Then it'll be expanded to
Polkadot BH as well.
So this PR adds the same set of tests to the `bridge-hub-test-utils`,
but for the case when remote chain is the chain with GRANDPA finality.
There's a lot of changes in this PR - I'll describe some:
- I've added `BasicParachainRuntime` trait to decrease number of lines
we need to add to `where` clause. Could revert, but imo it is useful;
- `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is
a submodule for generating test data for the test sets.
`from_parachain.rs` is used in tests for the case when remote chain is a
parachain, `from_grandpa_chain.rs` - for the bridges with remote GRANDPA
chains. `mod.rs` has some code, shared by both types of tests;
- `cumulus/parachains/runtimes/bridge-hubs/test-utils/src/test_data` is
a submodule with all test cases. The `mod.rs` has tests, suitable for
all cases. There's also `wth_parachain.rs` and `with_grandpa_chain.rs`
with the same meaning as above;
- I've merged the "core" code of two previous tests -
`relayed_incoming_message_works` and `complex_relay_extrinsic_works`
into one single `relayed_incoming_message_works` test. So now we are
always constructing extrinsics and are dispatching them using executive
module (meaning all signed extensions are also tested).
New test set is used here:
https://github.com/paritytech/polkadot-sdk/pull/2540. Once this PR is
merged, I'll merge that other PR with master to remove duplicate
changes.
I'm also planning to cleanup generic constraints + remove some
unnecessary assumptions about used chains in a follow-up PRs. But for
now I think this PR has enough changes, so don't want to complicate it
even more.
---
Breaking changes for the code that have used those tests before:
- the `construct_and_apply_extrinsic` callback now accepts the
`RuntimeCall` instead of the `pallet_utility::Call`;
- the `construct_and_apply_extrinsic` now may be called multiple times
for the single test, so make sure the `frame_system::CheckNonce` is
correctly constructed;
- all previous tests have been moved from
`bridge_hub_test_utils::test_cases` to
`bridge_hub_test_utils::test_cases::from_parachain` module;
- there are several changes in test arguments - please refer to
https://github.com/paritytech/polkadot-sdk/compare/sv-tests-for-bridge-with-remote-grandpa-chain?expand=1#diff-79a28d4d3e1749050341c2424f00c4c139825b1a20937767f83e58b95166735c
for details.
Closes#2326.
This PR both fixes a logic bug and replaces an incorrect name.
## Bug Fix: Respecting custom genesis builder
Prior to this PR the standard logic for creating a genesis block was
repeated inside of cumulus. This PR removes that duplicated logic, and
calls into the proper `BuildGenesisBlock` implementation.
One consequence is that if the genesis block has already been
initialized, it will not be re-created, but rather read from the
database like it is for other node invocations. So you need to watch out
for old unpurged data during the development process. Offchain tools may
need to be updated accordingly. I've already filed
https://github.com/paritytech/zombienet/issues/1519
## Rename: It doesn't export state. It exports head data.
The name export-genesis-state was always wrong, nad it's never too late
to right a wrong. I've changed the name of the struct to
`ExportGenesisHeadCommand`.
There is still the question of what to do with individual nodes' public
CLIs. I have updated the parachain template to a reasonable default that
preserves compatibility with tools that will expect
`export-genesis-state` to still work. And I've chosen not to modify the
public CLIs of any other nodes in the repo. I'll leave it up to their
individual owners/maintains to decide whether that is appropriate.
---------
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Bastian Köcher <info@kchr.de>
Initial implementation for the plan discussed here: https://github.com/paritytech/polkadot-sdk/issues/701
Built on top of https://github.com/paritytech/polkadot-sdk/pull/1178
v0: https://github.com/paritytech/polkadot/pull/7554,
## Overall idea
When approval-voting checks a candidate and is ready to advertise the
approval, defer it in a per-relay chain block until we either have
MAX_APPROVAL_COALESCE_COUNT candidates to sign or a candidate has stayed
MAX_APPROVALS_COALESCE_TICKS in the queue, in both cases we sign what
candidates we have available.
This should allow us to reduce the number of approvals messages we have
to create/send/verify. The parameters are configurable, so we should
find some values that balance:
- Security of the network: Delaying broadcasting of an approval
shouldn't but the finality at risk and to make sure that never happens
we won't delay sending a vote if we are past 2/3 from the no-show time.
- Scalability of the network: MAX_APPROVAL_COALESCE_COUNT = 1 &
MAX_APPROVALS_COALESCE_TICKS =0, is what we have now and we know from
the measurements we did on versi, it bottlenecks
approval-distribution/approval-voting when increase significantly the
number of validators and parachains
- Block storage: In case of disputes we have to import this votes on
chain and that increase the necessary storage with
MAX_APPROVAL_COALESCE_COUNT * CandidateHash per vote. Given that
disputes are not the normal way of the network functioning and we will
limit MAX_APPROVAL_COALESCE_COUNT in the single digits numbers, this
should be good enough. Alternatively, we could try to create a better
way to store this on-chain through indirection, if that's needed.
## Other fixes:
- Fixed the fact that we were sending random assignments to
non-validators, that was wrong because those won't do anything with it
and they won't gossip it either because they do not have a grid topology
set, so we would waste the random assignments.
- Added metrics to be able to debug potential no-shows and
mis-processing of approvals/assignments.
## TODO:
- [x] Get feedback, that this is moving in the right direction. @ordian
@sandreim @eskimor @burdges, let me know what you think.
- [x] More and more testing.
- [x] Test in versi.
- [x] Make MAX_APPROVAL_COALESCE_COUNT &
MAX_APPROVAL_COALESCE_WAIT_MILLIS a parachain host configuration.
- [x] Make sure the backwards compatibility works correctly
- [x] Make sure this direction is compatible with other streams of work:
https://github.com/paritytech/polkadot-sdk/issues/635 &
https://github.com/paritytech/polkadot-sdk/issues/742
- [x] Final versi burn-in before merging
---------
Signed-off-by: Alexandru Gheorghe <alexandru.gheorghe@parity.io>
We were not filtering for sibling parachains, but for sibling anything
---------
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: command-bot <>
## Summary
This pull request proposes a solution for improved control of the
versioned XCM flow over the bridge (across different consensus chains)
and resolves the situation where the sending chain/consensus has already
migrated to a higher XCM version than the receiving chain/consensus.
## Problem/Motivation
The current flow over the bridge involves a transfer from AssetHubRococo
(AHR) to BridgeHubRococo (BHR) to BridgeHubWestend (BHW) and finally to
AssetHubWestend (AHW), beginning with a reserve-backed transfer on AHR.
In this process:
1. AHR sends XCM `ExportMessage` through `XcmpQueue`, incorporating XCM
version checks using the `WrapVersion` feature, influenced by
`pallet_xcm::SupportedVersion` (managed by
`pallet_xcm::force_xcm_version` or version discovery).
2. BHR handles the `ExportMessage` instruction, utilizing the latest XCM
version. The `HaulBlobExporter` converts the inner XCM to
[`VersionedXcm::from`](https://github.com/paritytech/polkadot-sdk/blob/63ac2471aa0210f0ac9903bdd7d8f9351f9a635f/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465-L467),
also using the latest XCM version.
However, challenges arise:
- Incompatibility when BHW uses a different version than BHR. For
instance, if BHR migrates to **XCMv4** while BHW remains on **XCMv3**,
BHR's `VersionedXcm::from` uses `VersionedXcm::V4` variant, causing
encoding issues for BHW.
```
/// Just a simulation of possible error, which could happen on BHW
/// (this code is based on actual master without XCMv4)
let encoded = hex_literal::hex!("0400");
println!("{:?}", VersionedXcm::<()>::decode(&mut &encoded[..]));
Err(Error { cause: None, desc: "Could not decode `VersionedXcm`, variant
doesn't exist" })
```
- Similar compatibility issues exist between AHR and AHW.
## Solution
This pull request introduces the following solutions:
1. **New trait `CheckVersion`** - added to the `xcm` module and exposing
`pallet_xcm::SupportedVersion`. This enhancement allows checking the
actual XCM version for desired destinations outside of the `pallet_xcm`
module.
2. **Version Check in `HaulBlobExporter`** uses `CheckVersion` to check
known/configured destination versions, ensuring compatibility. For
example, in the scenario mentioned, BHR can store the version `3` for
BHW. If BHR is on XCMv4, it will attempt to downgrade the message to
version `3` instead of using the latest version `4`.
3. **Version Check in `pallet-xcm-bridge-hub-router`** - this check
ensures compatibility with the real destination's XCM version,
preventing the unnecessary sending of messages to the local bridge hub
if versions are incompatible.
These additions aim to improve the control and compatibility of XCM
flows over the bridge and addressing issues related to version
mismatches.
## Possible alternative solution
_(More investigation is needed, and at the very least, it should extend
to XCMv4/5. If this proves to be a viable option, I can open an RFC for
XCM.)._
Add the `XcmVersion` attribute to the `ExportMessage` so that the
sending chain can determine, based on what is stored in
`pallet_xcm::SupportedVersion`, the version the destination is using.
This way, we may not need to handle the version in `HaulBlobExporter`.
```
ExportMessage {
network: NetworkId,
destination: InteriorMultiLocation,
xcm: Xcm<()>
destination_xcm_version: Version, // <- new attritbute
},
```
```
pub trait ExportXcm {
fn validate(
network: NetworkId,
channel: u32,
universal_source: &mut Option<InteriorMultiLocation>,
destination: &mut Option<InteriorMultiLocation>,
message: &mut Option<Xcm<()>>,
destination_xcm_version: Version, , // <- new attritbute
) -> SendResult<Self::Ticket>;
```
## Future Directions
This PR does not fix version discovery over bridge, further
investigation will be conducted here:
https://github.com/paritytech/polkadot-sdk/issues/2417.
## TODO
- [x] `pallet_xcm` mock for tests uses hard-coded XCM version `2` -
change to 3 or lastest?
- [x] fix `pallet-xcm-bridge-hub-router`
- [x] fix HaulBlobExporter with version determination
[here](https://github.com/paritytech/polkadot-sdk/blob/2183669d05f9b510f979a0cc3c7847707bacba2e/polkadot/xcm/xcm-builder/src/universal_exports.rs#L465)
- [x] add unit-tests to the runtimes
- [x] run benchmarks for `ExportMessage`
- [x] extend local run scripts about `force_xcm_version(dest, version)`
- [ ] when merged, prepare governance calls for Rococo/Westend
- [ ] add PRDoc
Part of: https://github.com/paritytech/parity-bridges-common/issues/2719
---------
Co-authored-by: command-bot <>
This PR introduces a script and some templates to use the prdoc involved
in a release and build:
- the changelog
- a simple draft of audience documentation
Since the prdoc presence was enforced in the middle of the version
1.5.0, not all PRs did come with a `prdoc` file.
This PR creates all the missing `prdoc` files with some minimum content
allowing to properly generate the changelog.
The generated content is **not** suitable for the audience
documentation.
The audience documentation will be possible with the next version, when
all PR come with a proper `prdoc`.
## Assumptions
- the prdoc files for release `vX.Y.Z` have been moved under
`prdoc/X.Y.Z`
- the changelog requires for now for the prdoc files to contain author +
topic. Thos fields are optional.
The build script can be called as:
```
VERSION=X.Y.Z ./scripts/release/build-changelogs.sh
```
Related:
- #1408
---------
Co-authored-by: EgorPopelyaev <egor@parity.io>
Treasury Pallet Instance for the Fellowship in Westend Collectives.
In this update, we present a Treasury Pallet Instance that is under the
control of the Fellowship body, with oversight from the Root and
Treasurer origins. Here's how it is governed:
- the Root origin have the authority to reject or approve spend
proposals, with no amount limit for approvals.
- the Treasurer origin have the authority to reject or approve spend
proposals, with approval limits of up to 10,000,000 DOT.
- Voice of all Fellows ranked at 3 or above can reject or approve spend
proposals, with a maximum approval limit of 10,000 DOT.
- Voice of Fellows ranked at 4 or above can also reject or approve spend
proposals, with a maximum approval limit of 10,000,000 DOT.
Additionally, we introduce the Asset Rate Pallet Instance to establish
conversion rates from asset A to B. This is used to determine if a
proposed spend amount involving a non-native asset is permissible by the
commanding origin. The rates can be set up by the Root, Treasurer
origins, or Voice of all Fellows.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: joepetrowski <joe@parity.io>
`testnets-common` was introduced recently to start to separate testnet
parachain configurations from those of Polkadot and Kusama.
The `locks-review` and `polkadot-review` requirements are removed from
`parachains-common` in
https://github.com/paritytech/polkadot-sdk/pull/2564 and there are
[plans](https://github.com/paritytech/polkadot-sdk/pull/2564#discussion_r1410882115)
to move the Polkadot and Kusama contents of that package to the
fellowship, `testnets-common` is no longer needed.
This PR removes the crate and replaces uses of it in
`collectives-westend`, the only place it is currently used.
Closes https://github.com/paritytech/polkadot-sdk/issues/2319
Changes:
- Ensure that only `enqueue_message(s)` is callable from within the
message processor. This prevents messed up storage that can currently
happen when the pallet is called into recursively.
- Use `H256` instead of `[u8; 32]` for clearer API.
## Details
The re-entracy check is done with the `environmental` crate by adding a
`with_service_mutex(f)` function that runs the closure exclusively. This
works since the MQ pallet is not instantiable.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
As suggested in this thread:
https://github.com/polkadot-fellows/runtimes/pull/87#discussion_r1400237122
We already have the `IsChildSystemParachain`, which may be used at relay
chain, but it can't be used at a parachain level. So let's use
`AllSiblingSystemParachains` for that. I was thinking about
`AllSystemParachains`, but it may cause wrong impression that it can be
used at a relay chain level.
---------
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
# Motivation (+testing)
### Enable easy `ForeignAssets` transfers using `pallet-xcm`
We had just previously added capabilities to teleport fees during
reserve-based transfers, but what about reserve-transferring fees when
needing to teleport some non-fee asset?
This PR aligns everything under either explicit reserve-transfer,
explicit teleport, or this new flexible `transfer_assets()` which can
mix and match as needed with fewer artificial constraints imposed to the
user.
This will enable, for example, a (non-system) parachain to teleport
their `ForeignAssets` assets to AssetHub while using DOT to pay fees.
(the assets are teleported - as foreign assets should from their owner
chain - while DOT used for fees can only be reserve-based transferred
between said parachain and AssetHub).
Added `xcm-emulator` tests for this scenario ^.
# Description
Reverts `(limited_)reserve_transfer_assets` to only allow reserve-based
transfers for all `assets` including fees.
Similarly `(limited_)teleport_assets` only allows teleports for all
`assets` including fees.
For complex combinations of asset transfers where assets and fees may
have different reserves or different reserve/teleport trust
configurations, users can use the newly added `transfer_assets()`
extrinsic which is more flexible in allowing more complex scenarios.
`assets` (excluding `fees`) must have same reserve location or otherwise
be teleportable to `dest`.
No limitations imposed on `fees`.
- for local reserve: transfer assets to sovereign account of destination
chain and forward a notification XCM to `dest` to mint and deposit
reserve-based assets to `beneficiary`.
- for destination reserve: burn local assets and forward a notification
to `dest` chain to withdraw the reserve assets from this chain's
sovereign account and deposit them to `beneficiary`.
- for remote reserve: burn local assets, forward XCM to reserve chain to
move reserves from this chain's SA to `dest` chain's SA, and forward
another XCM to `dest` to mint and deposit reserve-based assets to
`beneficiary`.
- for teleports: burn local assets and forward XCM to `dest` chain to
mint/teleport assets and deposit them to `beneficiary`.
## Review notes
Only around 500 lines are prod code (see `pallet_xcm/src/lib.rs`), the
rest of the PR is new tests and improving existing tests.
---------
Co-authored-by: command-bot <>
Smoldot sometimes stops reporting finalized blocks to us. Since we are
recovering from the relay chain with a huge delay on full nodes, we can
not rely on import notifications to set the best block. Because
sometimes we also do not receive finality notifications, the height
check in zombienet fails.
Proper solution is to update smoldot, there have been some changes since
the version we use. But upgrade is blocked by version conflict which
will be resolved with
https://github.com/paritytech/polkadot-sdk/pull/1631.
Improved max message size logic and added test for it
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: command-bot <>
Removes obsolete fields from the `QueueConfigData` structure. For the
remaining fields, if they use the old defaults, we replace them with the
new defaults.
Resolves: https://github.com/paritytech/polkadot-sdk/issues/1795
Bumps [proc-macro-crate](https://github.com/bkchr/proc-macro-crate) from
1.3.1 to 2.0.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a
href="https://github.com/bkchr/proc-macro-crate/releases">proc-macro-crate's
releases</a>.</em></p>
<blockquote>
<h2>v2.0.0</h2>
<h2>What's Changed</h2>
<ul>
<li>Release 2.0.0 by <a
href="https://github.com/bkchr"><code>@bkchr</code></a> in <a
href="https://redirect.github.com/bkchr/proc-macro-crate/pull/39">bkchr/proc-macro-crate#39</a></li>
</ul>
<p><strong>Full Changelog</strong>: <a
href="https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0">https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/cc100ed2bc1ac9bb81812fd435a43e2ef023f355"><code>cc100ed</code></a>
Merge pull request <a
href="https://redirect.github.com/bkchr/proc-macro-crate/issues/39">#39</a>
from bkchr/bkchr-2.0.0</li>
<li><a
href="https://github.com/bkchr/proc-macro-crate/commit/39a7c1844fc4d73ef397a7e8d9419f1f3381aa44"><code>39a7c18</code></a>
Release 2.0.0</li>
<li>See full diff in <a
href="https://github.com/bkchr/proc-macro-crate/compare/v1.3.1...v2.0.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore <dependency name> major version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's major version (unless you unignore this specific
dependency's major version or upgrade to it yourself)
- `@dependabot ignore <dependency name> minor version` will close this
group update PR and stop Dependabot creating any more for the specific
dependency's minor version (unless you unignore this specific
dependency's minor version or upgrade to it yourself)
- `@dependabot ignore <dependency name>` will close this group update PR
and stop Dependabot creating any more for the specific dependency
(unless you unignore this specific dependency or upgrade to it yourself)
- `@dependabot unignore <dependency name>` will remove all of the ignore
conditions of the specified dependency
- `@dependabot unignore <dependency name> <ignore condition>` will
remove the ignore condition of the specified dependency and ignore
conditions
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Using taplo, fixes all our broken and inconsistent toml formatting and
adds CI to keep them tidy.
If people want we can customise the format rules as described here
https://taplo.tamasfe.dev/configuration/formatter-options.html
@ggwpez, I suggest zepter is used only for checking features are
propagated, and leave formatting for taplo to avoid duplicate work and
conflicts.
TODO
- [x] Use `exclude = [...]` syntax in taplo file to ignore zombienet
tests instead of deleting the dir
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
This PR provides the infrastructure for the pov-reclaim mechanism
discussed in #209. The goal is to provide the current proof size to the
runtime so it can be used to reclaim storage weight.
## New Host Function
- A new host function is provided
[here](https://github.com/skunert/polkadot-sdk/blob/5b317fda3be205f4136f10d4490387ccd4f9765d/cumulus/primitives/pov-reclaim/src/lib.rs#L23).
It returns the size of the current proof size to the runtime. If
recording is not enabled, it returns 0.
## Implementation Overview
- Implement option to enable proof recording during import in the
client. This is currently enabled for `polkadot-parachain`,
`parachain-template` and the cumulus test node.
- Make the proof recorder ready for no-std. It was previously only
enabled for std environments, but we need to record the proof size in
`validate_block` too.
- Provide a recorder implementation that only the records the size of
incoming nodes and does not store the nodes itself.
- Fix benchmarks that were broken by async backing changes
- Provide new externalities extension that is registered by default if
proof recording is enabled.
- I think we should discuss the naming, pov-reclaim was more intuitive
to me, but we could also go with clawback like in the issue.
## Impact of proof recording during import
With proof recording: 6.3058 Kelem/s
Without proof recording: 6.3427 Kelem/s
The measured impact on the importing performance is quite low on my
machine using the block import benchmark. With proof recording I am
seeing a performance hit of 0.585%.
---------
Co-authored-by: command-bot <>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: Bastian Köcher <git@kchr.de>
see #2189
This PR does the following:
- Bring the user api functions into a new pallet-contracts-uapi (They
are currently defined in ink!
[here])(https://github.com/paritytech/ink/blob/master/crates/env/src/engine/on_chain/ext.rs)
- Add older api versions and unstable to the user api trait.
- Remove pallet-contracts-primitives and bring the types it defined in
uapi / pallet-contracts
- Add the infrastructure to build fixtures from Rust files and test it
works by replacing `dummy.wat` and `call.wat`
- Move all the doc from wasm/runtime.rs to pallet-contracts-uapi.
This will be done in a follow up:
- convert the rest of the test from .wat to rust
- bring risc-v uapi up to date with wasm
- finalize the uapi host fns, making sure everything is codegen from the
source host fns in pallet-contracts
---------
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
This small PR removes an unnecessary trait bound to the `AuxStore` trait
from the Parachain template's `rpc.rs` file.
With that bound removed, the entire dependency on `sc-client-api` can
also be removed.
---------
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Since the Polkadot and Kusama runtimes are no longer in the repo, the
relevant systems parachains runtimes also need to be removed. More
context [here](https://github.com/paritytech/polkadot-sdk/issues/603)
and [here](https://github.com/paritytech/polkadot-sdk/pull/1731).
Removes the following:
- `asset-hub-kusama` and `asset-hub-polkadot`
- `bridge-hub-kusama` and `bridge-hub-polkadot`
- `collectives-polkadot`
- `glutton-kusama`
Partially solves #603 and adds to #1731.
This commit introduces a new concept called `NotificationService` which
allows Polkadot protocols to communicate with the underlying
notification protocol implementation directly, without routing events
through `NetworkWorker`. This implies that each protocol has its own
service which it uses to communicate with remote peers and that each
`NotificationService` is unique with respect to the underlying
notification protocol, meaning `NotificationService` for the transaction
protocol can only be used to send and receive transaction-related
notifications.
The `NotificationService` concept introduces two additional benefits:
* allow protocols to start using custom handshakes
* allow protocols to accept/reject inbound peers
Previously the validation of inbound connections was solely the
responsibility of `ProtocolController`. This caused issues with light
peers and `SyncingEngine` as `ProtocolController` would accept more
peers than `SyncingEngine` could accept which caused peers to have
differing views of their own states. `SyncingEngine` would reject excess
peers but these rejections were not properly communicated to those peers
causing them to assume that they were accepted.
With `NotificationService`, the local handshake is not sent to remote
peer if peer is rejected which allows it to detect that it was rejected.
This commit also deprecates the use of `NetworkEventStream` for all
notification-related events and going forward only DHT events are
provided through `NetworkEventStream`. If protocols wish to follow each
other's events, they must introduce additional abtractions, as is done
for GRANDPA and transactions protocols by following the syncing protocol
through `SyncEventStream`.
Fixes https://github.com/paritytech/polkadot-sdk/issues/512
Fixes https://github.com/paritytech/polkadot-sdk/issues/514
Fixes https://github.com/paritytech/polkadot-sdk/issues/515
Fixes https://github.com/paritytech/polkadot-sdk/issues/554
Fixes https://github.com/paritytech/polkadot-sdk/issues/556
---
These changes are transferred from
https://github.com/paritytech/substrate/pull/14197 but there are no
functional changes compared to that PR
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
The test was a bit flaky on CI.
There was a race condition in the pov-recovery system. If the timing is
bad, it can happen that a block waits for a parent that is already
queued for import. The check if a block has children waiting happens
when we insert into the import queue. So we need to do an additional
check once we receive the import notification for the parent block.
Second issue is that `alice` was missing `--in-peers 0` and `--out-peers
0`, so alice was sometimes still fetching block via sync and the
assertion on the logs in zombienet would fail.
There is another potential issue that I saw once locally. We have a
failing pov-recovery queue that fails from time to time to check that
the retry mechanism does what it should. We now make sure that the same
candidate is never failed twice, so the tests become more predictable.
Currently the polkadot node will backoff from block authoring if
finality starts lagging. This PR disables this mechanism on production
networks (polkadot and kusama) and adds a flags to optionally force
enabling it.
## Overview
This PR aligns the `spec_version` formatting to the [recent
changes](https://github.com/polkadot-fellows/runtimes/pull/26/files#diff-efa4caeb17487ecb13d8f5eb7863c3241d84afa2e73fbf25909a2ca89df0f362R142)
made for the Polkadot/Kusama runtimes.
It also backports the latest version `v1.4.0` bumps as `1_004_000`.
## Details
During the switch from `v0.9` to `v1.x`, the format of the
`spec_version` was modified from: `(M)m_ppp` for a runtime considered on
version `M.m.pp`. For instance `0.9.42` had a `spec_version` of `9420`.
With the transition to `v1.x`, the format was changed to a bigger number
(still `u32`) formatted as `MM_mm_ppp` where `1.2.3` would be stored as
`01_02_003`.
This PR aligns the format with that has been introduced in the
fellowship repo: `MMM_mmm_ppp`.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
The last issue blocking the removal of the Polkadot and Kusama system
parachains from the repo in #1737 is the dependency on the runtime code
through the RuntimeApi in `polkadot-parachain`.
This PR introduces two fake runtimes to satisfy the build requirements
and changes the `new_partial` function to make it not be generic over
the runtimes.
The reason for the second runtime is the different Aura keys used in
Polkadot Asset Hub, as the impl for AuraApi depends on this type.
If this changes the `RuntimeApi` generic could be removed completely
from all functions in `services.rs` and and generic type parameters in
`services.rs` and specified as a concrete type to TFullClient`.
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
I noticed that this test broke at some point. The parachain nodes should
only acquire their blocks from the relay chain. But they were connecting
to their peers and started fetching blocks from there.
In this test I now take additional measures so we check that each nodes
really uses pov-recovery to get the blocks.
Egor_P