* Rename ExecutionMode to IsolationStrategy
Execution mode is too generic name and can imply a lot of different
aspects of execution. The notion of isolation better describes the
meant aspect.
And while I am at it, I also renamed mode -> strategy cause it seems a
bit more appropriate, although that is way more subjective.
* Fix compilation in wasm_executor tests.
* Add a comment to IsolationStrategy
* Update comments on IsolationStrategy
* Update node/core/candidate-validation/src/lib.rs
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Accomodate the point on interruption
* Update parachain/src/wasm_executor/mod.rs
Co-authored-by: Andronik Ordian <write@reusable.software>
* Naming nits
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: Andronik Ordian <write@reusable.software>
* Adds integration test based on adder collator
This adds an integration test for parachains that uses the adder
collator. The test will start two relay chain nodes and one collator and
waits until 4 blocks are build and enacted by the parachain.
* Make sure the integration test is run in CI
* Fix wasm compilation
* Update parachain/test-parachains/adder/collator/src/lib.rs
Co-authored-by: Sergei Shulepov <sergei@parity.io>
* Update cli/src/command.rs
Co-authored-by: Sergei Shulepov <sergei@parity.io>
* HRMP: Update the impl guide
* HRMP: Incorporate the channel notifications into the guide
* HRMP: Renaming in the impl guide
* HRMP: Constrain the maximum number of HRMP messages per candidate
This commit addresses the HRMP part of https://github.com/paritytech/polkadot/issues/1869
* XCM: Introduce HRMP related message types
* HRMP: Data structures and plumbing
* HRMP: Configuration
* HRMP: Data layout
* HRMP: Acceptance & Enactment
* HRMP: Test base logic
* Update adder collator
* HRMP: Runtime API for accessing inbound messages
Also, removing some redundant fully-qualified names.
* HRMP: Add diagnostic logging in acceptance criteria
* HRMP: Additional tests
* Self-review fixes
* save test refactorings for the next time
* Missed a return statement.
* a formatting blip
* Add missing logic for appending HRMP digests
* Remove the channel contents vectors which became empty
* Tighten HRMP channel digests invariants.
* Apply suggestions from code review
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* Remove a note about sorting for channel id
* Add missing rustdocs to the configuration
* Clarify and update the invariant for HrmpChannelDigests
* Make the onboarding invariant less sloppy
Namely, introduce `Paras::is_valid_para` (in fact, it already is present
in the implementation) and hook up the invariant to that.
Note that this says "within a session" because I don't want to make it
super strict on the session boundary. The logic on the session boundary
should be extremely careful.
* Make `CandidateCheckContext` use T::BlockNumber for hrmp_watermark
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
We need to distribute the PoV after we have seconded it. Other nodes
that will receive our `Secondded` statement and want to validate the
candidate another time will request this PoV from us.
* Make `CandidateHash` a real type
This pr adds a new type `CandidateHash` that is used instead of the
opaque `Hash` type. This helps to ensure on the type system level that
we are passing the correct types.
This pr also fixes wrong usage of `relay_parent` as `candidate_hash`
when communicating with the av storage.
* Update core-primitives/src/lib.rs
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* Wrap the lines
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* backing: extract log target
* bitfield-signing: extract log target
* utils: fix a typo
* provisioner: extract log target
* candidate selection: remove unused error variant
* bitfield-distribution: change the return type of run
* pov-distribution: extract log target
* collator-protocol: simplify runtime request
* collation-generation: do not exit early on error
* collation-generation: do not exit on double init
* collator-protocol: do not exit on errors and rename LOG_TARGET
* collator-protocol: a workaround for ununused imports warning
* Update node/network/bitfield-distribution/src/lib.rs
* collation-generation: elevate warn! to error!
* collator-protocol: fix imports
* post merge fix
* fix compilation
* Do not validate a candidate in candidate selection
The candidate selection subsystem should not validate a candidate, as
this is done by the backing subsystem on a `Second` request. Otherwise
we validate one candidate twice.
* Update candidate-selection.md
* Moare fixes for parachains
- Sending data to a job should always contain a relay parent. Done this
for the provisioner
- Fixed the `select_availability_bitfields` function. It was assuming we
have one core per validator, while we only have one core per parachain.
- Drive by async "rewrite" in proposer
* Make tests compile
* Update primitives/src/v1.rs
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* Parachain improvements
- Set the parachains configuration in Rococo genesis
- Don't stop the overseer when a subsystem job is stopped
- Several small code changes
* Remove unused functionality
* Return error from the runtime instead of printing it
* Apply suggestions from code review
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* Update primitives/src/v1.rs
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* Update primitives/src/v1.rs
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* Fix test
* Revert "Update primitives/src/v1.rs"
This reverts commit 11fce2785acd1de481ca57815b8e18400f09fd52.
* Revert "Update primitives/src/v1.rs"
This reverts commit d6439fed4f954360c89fb1e12b73954902c76a41.
* Revert "Return error from the runtime instead of printing it"
This reverts commit cb4b5c0830ac516a6d54b2c24197e9354f2b98cb.
* Revert "Fix test"
This reverts commit 0c5fa1b5566d4cd3c55a55d485e707165ce7a59e.
* Update runtime/parachains/src/runtime_api_impl/v1.rs
Co-authored-by: Sergei Shulepov <sergei@parity.io>
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
Co-authored-by: Sergei Shulepov <sergei@parity.io>
* fix: ensure candidate validation gets code based on occupied core assumption
* guide: runtime API for historical validation code
* add historical runtime API
* integrate into runtime API subsystem
* remove blocked TODO
* fix service build: enable notifications protocol only under real overseer
* Update node/subsystem/src/messages.rs
Co-authored-by: Sergei Shulepov <sergei@parity.io>
* fix compilation
Co-authored-by: Robert Habermeier <robert@Roberts-MacBook-Pro.local>
Co-authored-by: Sergei Shulepov <sergei@parity.io>
* UMP: Update the impl guide
* UMP: Incorporate XCM related changes into the guide
* UMP: Data structures and configuration
* UMP: Initial plumbing
* UMP: Data layout
* UMP: Acceptance criteria & enactment
* UMP: Fix dispatcher bug and add the test for it
* UMP: Constrain the maximum size of an UMP message
This commit addresses the UMP part of https://github.com/paritytech/polkadot/issues/1869
* Fix failing test due to misconfiguration
* Make the type of RelayDispatchQueueSize be more apparent in the guide
* Revert renaming `max_upward_queue_capacity` to `max_upward_queue_count`
* convert spaces to tabs
Co-authored-by: Bernhard Schuster <bernhard@ahoi.io>
* Update runtime/parachains/src/router/ump.rs
Co-authored-by: Bernhard Schuster <bernhard@ahoi.io>
Co-authored-by: Bernhard Schuster <bernhard@ahoi.io>
* start working on building the real overseer
Unfortunately, this fails to compile right now due to an upstream
failure to compile which is probably brought on by a recent upgrade
to rustc v1.47.
* fill in AllSubsystems internal constructors
* replace fn make_metrics with Metrics::attempt_to_register
* update to account for #1740
* remove Metrics::register, rename Metrics::attempt_to_register
* add 'static bounds to real_overseer type params
* pass authority_discovery and network_service to real_overseer
It's not straightforwardly obvious that this is the best way to handle
the case when there is no authority discovery service, but it seems
to be the best option available at the moment.
* select a proper database configuration for the availability store db
* use subdirectory for av-store database path
* apply Basti's patch which avoids needing to parameterize everything on Block
* simplify path extraction
* get all tests to compile
* Fix Prometheus double-registry error
for debugging purposes, added this to node/subsystem-util/src/lib.rs:472-476:
```rust
Some(registry) => Self::try_register(registry).map_err(|err| {
eprintln!("PrometheusError calling {}::register: {:?}", std::any::type_name::<Self>(), err);
err
}),
```
That pointed out where the registration was failing, which led to
this fix. The test still doesn't pass, but it now fails in a new
and different way!
* authorities must have authority discovery, but not necessarily overseer handlers
* fix broken SpawnedSubsystem impls
detailed logging determined that using the `Box::new` style of
future generation, the `self.run` method was never being called,
leading to dropped receivers / closed senders for those subsystems,
causing the overseer to shut down immediately.
This is not the final fix needed to get things working properly,
but it's a good start.
* use prometheus properly
Prometheus lets us register simple counters, which aren't very
interesting. It also allows us to register CounterVecs, which are.
With a CounterVec, you can provide a set of labels, which can
later be used to filter the counts.
We were using them wrong, though. This pattern was repeated in a
variety of places in the code:
```rust
// panics with an cardinality mismatch
let my_counter = register(CounterVec::new(opts, &["succeeded", "failed"])?, registry)?;
my_counter.with_label_values(&["succeeded"]).inc()
```
The problem is that the labels provided in the constructor are not
the set of legal values which can be annotated, but a set of individual
label names which can have individual, arbitrary values.
This commit fixes that.
* get av-store subsystem to actually run properly and not die on first signal
* typo fix: incomming -> incoming
* don't disable authority discovery in test nodes
* Fix rococo-v1 missing session keys
* Update node/core/av-store/Cargo.toml
* try dummying out av-store on non-full-nodes
* overseer and subsystems are required only for full nodes
* Reduce the amount of warnings on browser target
* Fix two more warnings
* InclusionInherent should actually have an Inherent module on rococo
* Ancestry: don't return genesis' parent hash
* Update Cargo.lock
* fix broken test
* update test script: specify chainspec as script argument
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Update node/service/src/lib.rs
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* node/service/src/lib: Return error via ? operator
* post-merge blues
* add is_collator flag
* prevent occasional av-store test panic
* simplify fix; expand application
* run authority_discovery in Role::Discover when collating
* distinguish between proposer closed channel errors
* add IsCollator enum, remove is_collator CLI flag
* improve formatting
* remove nop loop
* Fix some stuff
* Adds test parachain adder collator
* Add sudo to Rococo, change session length to 30 seconds and some renaming
* Update to the latest changes on master
* Some fixes
* Fix compilation
* Update parachain/test-parachains/adder/collator/src/lib.rs
Co-authored-by: Sergei Shulepov <sergei@parity.io>
* Review comments
* Downgrade transaction version
* Fixes
* MOARE
* Register notification protocols
* utils: remove unused error
* av-store: more resilient to some errors
* address review nits
* address more review nits
Co-authored-by: Peter Goodspeed-Niklaus <peter.r.goodspeedniklaus@gmail.com>
Co-authored-by: Andronik Ordian <write@reusable.software>
Co-authored-by: Fedor Sakharov <fedor.sakharov@gmail.com>
Co-authored-by: Robert Habermeier <robert@Roberts-MBP.lan1>
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Sergey Shulepov <s.pepyakin@gmail.com>
Co-authored-by: Sergei Shulepov <sergei@parity.io>
* remove pending TODO after the DMP impl merge
* DMP: Update the impl guide
* DMP: Incorporate XCM related changes into the guide
This is the DMP related part of https://github.com/paritytech/polkadot/issues/1702
* DMP: data structures and plumbing
* DMP: Implement DMP logic in the router module
DMP: Integrate DMP parts into the inclusion module
* DMP: Introduce the max size limit for the size of a downward message
* DMP: Runtime API for accessing inbound messages
* OCD
Small clean ups
* DMP: fix the naming of the error
* DMP: add caution about a non-existent recipient
* start working on building the real overseer
Unfortunately, this fails to compile right now due to an upstream
failure to compile which is probably brought on by a recent upgrade
to rustc v1.47.
* fill in AllSubsystems internal constructors
* replace fn make_metrics with Metrics::attempt_to_register
* update to account for #1740
* remove Metrics::register, rename Metrics::attempt_to_register
* add 'static bounds to real_overseer type params
* pass authority_discovery and network_service to real_overseer
It's not straightforwardly obvious that this is the best way to handle
the case when there is no authority discovery service, but it seems
to be the best option available at the moment.
* select a proper database configuration for the availability store db
* use subdirectory for av-store database path
* apply Basti's patch which avoids needing to parameterize everything on Block
* simplify path extraction
* get all tests to compile
* Fix Prometheus double-registry error
for debugging purposes, added this to node/subsystem-util/src/lib.rs:472-476:
```rust
Some(registry) => Self::try_register(registry).map_err(|err| {
eprintln!("PrometheusError calling {}::register: {:?}", std::any::type_name::<Self>(), err);
err
}),
```
That pointed out where the registration was failing, which led to
this fix. The test still doesn't pass, but it now fails in a new
and different way!
* authorities must have authority discovery, but not necessarily overseer handlers
* fix broken SpawnedSubsystem impls
detailed logging determined that using the `Box::new` style of
future generation, the `self.run` method was never being called,
leading to dropped receivers / closed senders for those subsystems,
causing the overseer to shut down immediately.
This is not the final fix needed to get things working properly,
but it's a good start.
* use prometheus properly
Prometheus lets us register simple counters, which aren't very
interesting. It also allows us to register CounterVecs, which are.
With a CounterVec, you can provide a set of labels, which can
later be used to filter the counts.
We were using them wrong, though. This pattern was repeated in a
variety of places in the code:
```rust
// panics with an cardinality mismatch
let my_counter = register(CounterVec::new(opts, &["succeeded", "failed"])?, registry)?;
my_counter.with_label_values(&["succeeded"]).inc()
```
The problem is that the labels provided in the constructor are not
the set of legal values which can be annotated, but a set of individual
label names which can have individual, arbitrary values.
This commit fixes that.
* get av-store subsystem to actually run properly and not die on first signal
* typo fix: incomming -> incoming
* don't disable authority discovery in test nodes
* Fix rococo-v1 missing session keys
* Update node/core/av-store/Cargo.toml
* try dummying out av-store on non-full-nodes
* overseer and subsystems are required only for full nodes
* Reduce the amount of warnings on browser target
* Fix two more warnings
* InclusionInherent should actually have an Inherent module on rococo
* Ancestry: don't return genesis' parent hash
* Update Cargo.lock
* fix broken test
* update test script: specify chainspec as script argument
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Update node/service/src/lib.rs
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* node/service/src/lib: Return error via ? operator
* post-merge blues
* add is_collator flag
* prevent occasional av-store test panic
* simplify fix; expand application
* run authority_discovery in Role::Discover when collating
* distinguish between proposer closed channel errors
* add IsCollator enum, remove is_collator CLI flag
* improve formatting
* remove nop loop
* Fix some stuff
Co-authored-by: Andronik Ordian <write@reusable.software>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Fedor Sakharov <fedor.sakharov@gmail.com>
Co-authored-by: Robert Habermeier <robert@Roberts-MBP.lan1>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: Max Inden <mail@max-inden.de>
* annoying whitespaces
* update guide
Add `CheckValidationOutputs` runtime api and also change the
candidate-validation stuff
* promote ValidationOutputs to global primitives
i.e. move it from node specific primitives to global v1 primitives. This
will be needed when we share it later in the runtime inclusion module
* refactor acceptance checks in the inclusion module
factor out the common code to share it during the block inclusion and
for the forthcoming CheckValidationOutputs runtime api.
Also note that the acceptance criteria was updated to incorporate checks
that exist now in candidate-validation
* plumb the runtime api outside
* extract validation_data from ValidationOutputs
* use runtime-api to check validation outputs
apart from that refactor, update docs and tidy a bit
* Update the maxium code size
This is to fix a test that performs an upgrade.
* Initial commit
* Move tests to separate module
* Move timestamps to the newtype
* Change idx name
* Use Duration for consts and update chunk records
* Ordering::Equal
* Update node/core/av-store/src/lib.rs
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* put_ methods do the array sorting
* Fix get_block_number
* Change StoreChunk message type and relay parent method
* Add chunk tests
* Fix block number computation for StoreChunk
* Duration instead of u64 everywhere
* Add a clarifying comment
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* stupid, but it compiles
* redo
* cleanup
* add ValidatorDiscovery to msgs
* sketch network bridge code
* ConnectToAuthorities instead of validators
* more stuff
* cleanup
* more stuff
* complete ConnectToAuthoritiesState
* Update node/network/bridge/src/lib.rs
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* Collator protocol subsystem (#1659)
* WIP
* The initial implementation of the collator side.
* Improve comments
* Multiple collation requests
* Add more tests and comments to validator side
* Add comments, remove dead code
* Apply suggestions from code review
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* Fix build after suggested changes
* Also connect to the next validator group
* Remove a Future impl and move TimeoutExt to util
* Minor nits
* Fix build
* Change FetchCollations back to FetchCollation
* Try this
* Final fixes
* Fix build
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* handle multiple in-flight connection requests
* handle cancelled requests
* Update node/core/runtime-api/src/lib.rs
Co-authored-by: Bernhard Schuster <bernhard@ahoi.io>
* redo it again
* more stuff
* redo it again
* update comments
* workaround Future is not Send
* fix trailing spaces
* clarify comments
* bridge: fix compilation in tests
* update more comments
* small fixes
* port collator protocol to new validator discovery api
* collator tests compile
* collator tests pass
* do not revoke a request when the stream receiver is closed
* make revoking opt-in
* fix is_fulfilled
* handle request revokation in collator
* tests
* wait for validator connections asyncronously
* fix compilation
* relabel my todos
* apply Fedor's patch
* resolve reconnection TODO
* resolve revoking TODO
* resolve channel capacity TODO
* resolve peer cloning TODO
* resolve peer disconnected TODO
* resolve PeerSet TODO
* wip tests
* more tests
* resolve Arc TODO
* rename pending to non_revoked
* one more test
* extract utility function into util crate
* fix compilation in tests
* Apply suggestions from code review
Co-authored-by: Fedor Sakharov <fedor.sakharov@gmail.com>
* revert pin_project removal
* fix while let loop
* Revert "revert pin_project removal"
This reverts commit ae7f529d8de982ef66c3007dd1ff74c6ddce80d2.
* fix compilation
* Update node/subsystem/src/messages.rs
* docs on pub items
* guide updates
* remove a TODO
* small guide update
* fix a typo
* link to the issue
* validator discovery: on_request docs
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
Co-authored-by: Fedor Sakharov <fedor.sakharov@gmail.com>
Co-authored-by: Bernhard Schuster <bernhard@ahoi.io>
* WIP
* The initial implementation of the collator side.
* Improve comments
* Multiple collation requests
* Add more tests and comments to validator side
* Add comments, remove dead code
* Apply suggestions from code review
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* Fix build after suggested changes
* Also connect to the next validator group
* Remove a Future impl and move TimeoutExt to util
* Minor nits
* Fix build
* Change FetchCollations back to FetchCollation
* Try this
* Final fixes
* Fix build
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* choose the straightforward candidate selection algorithm for now
* add draft implementation of candidate selection
* fix typo in summary
* more properly report misbehaving collators
* describe how CandidateSelection subsystem becomes aware of candidates
* revise candidate selection / collator protocol interaction pattern
* implement rest of candidate selection per the guide
* review: resolve nits
* start writing test suite, harness
* implement first test
* add second test
* implement third test
Co-authored-by: Bernhard Schuster <bernhard@ahoi.io>
* update primitives
* correct parent_head field
* make hrmp field pub
* refactor validation data: runtime
* refactor validation data: messages
* add arguments to full_validation_data runtime API
* port runtime API
* mostly port over candidate validation
* remove some parameters from ValidationParams
* guide: update candidate validation
* update candidate outputs
* update ValidationOutputs in primitives
* port over candidate validation
* add a new test for no-transient behavior
* update util runtime API wrappers
* candidate backing
* fix missing imports
* change some fields of validation data around
* runtime API impl
* update candidate validation
* fix backing tests
* grumbles from review
* fix av-store tests
* fix some more crates
* fix provisioner tests
* fix availability distribution tests
* port collation-generation to new validation data
* fix overseer tests
* Update roadmap/implementers-guide/src/node/utility/candidate-validation.md
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
Co-authored-by: Peter Goodspeed-Niklaus <coriolinus@users.noreply.github.com>
* service-new: cosmetic changes
* overseer: draft of prometheus metrics
* metrics: update active_leaves metrics
* metrics: extract into functions
* metrics: resolve XXX
* metrics: it's ugly, but it works
* Bump Substrate
* metrics: move a bunch of code around
* Bumb substrate again
* metrics: fix a warning
* fix a warning in runtime
* metrics: statements signed
* metrics: statements impl RegisterMetrics
* metrics: refactor Metrics trait
* metrics: add Metrics assoc type to JobTrait
* metrics: move Metrics trait to util
* metrics: fix overseer
* metrics: fix backing
* metrics: fix candidate validation
* metrics: derive Default
* metrics: docs
* metrics: add stubs for other subsystems
* metrics: add more stubs and fix compilation
* metrics: fix doctest
* metrics: move to subsystem
* metrics: fix candidate validation
* metrics: bitfield signing
* metrics: av store
* metrics: chain API
* metrics: runtime API
* metrics: stub for avad
* metrics: candidates seconded
* metrics: ok I gave up
* metrics: provisioner
* metrics: remove a clone by requiring Metrics: Sync
* metrics: YAGNI
* metrics: remove another TODO
* metrics: for later
* metrics: add parachain_ prefix
* metrics: s/signed_statement/signed_statements
* utils: add a comment for job metrics
* metrics: address review comments
* metrics: oops
* metrics: make sure to save files before commit 😅
* use _total suffix for requests metrics
Co-authored-by: Max Inden <mail@max-inden.de>
* metrics: add tests for overseer
* update Cargo.lock
* overseer: add a test for CollationGeneration
* collation-generation: impl metrics
* collation-generation: use kebab-case for name
* collation-generation: add a constructor
Co-authored-by: Gav Wood <gavin@parity.io>
Co-authored-by: Ashley Ruglys <ashley.ruglys@gmail.com>
Co-authored-by: Max Inden <mail@max-inden.de>
* sketch out provisioner basics
* handle provisionable data
* stub out select_inherent_data
* split runtime APIs into sub-chapters to improve linkability
* explain SignedAvailabilityBitfield semantics
* add internal link to further documentation
* some more work figuring out how the provisioner can do its thing
* fix broken link
* don't import enum variants where it's one layer deep
* make request_availability_cores a free fn in util
* document more precisely what should happen on block production
* finish first-draft implementation of provisioner
* start working on the full and proper backed candidate selection rule
* Pass number of block under construction via RequestInherentData
* Revert "Pass number of block under construction via RequestInherentData"
This reverts commit 850fe62cc0dfb04252580c21a985962000e693c8.
That initially looked like the better approach--it spent the time
budget for fetching the block number in the proposer, instead of
the provisioner, and that felt more appropriate--but it turns out
not to be obvious how to get the block number of the block under
construction from within the proposer. The Chain API may be less
ideal, but it should be easier to implement.
* wip: get the block under production from the Chain API
* add ChainApiMessage to AllMessages
* don't break the run loop if a provisionable data channel closes
* clone only those backed candidates which are coherent
* propagate chain_api subsystem through various locations
* add delegated_subsystem! macro to ease delegating subsystems
Unfortunately, it doesn't work right:
```
error[E0446]: private type `CandidateBackingJob` in public interface
--> node/core/backing/src/lib.rs:775:1
|
86 | struct CandidateBackingJob {
| - `CandidateBackingJob` declared as private
...
775 | delegated_subsystem!(CandidateBackingJob as CandidateBackingSubsystem);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ can't leak private type
```
I'm not sure precisely what's going wrong, here; I suspect the problem is
the use of `$job as JobTrait>::RunArgs` and `::ToJob`; the failure would be
that it's not reifying the types to verify that the actual types are public,
but instead referring to them via `CandidateBackingJob`, which is in fact private;
that privacy is the point.
Going to see if I can generic my way out of this, but we may be headed for a
quick revert here.
* fix delegated_subsystem
The invocation is a bit more verbose than I'd prefer, but it's also
more explicit about what types need to be public. I'll take it as a win.
* add provisioning subsystem; reduce public interface of provisioner
* deny missing docs in provisioner
* refactor core selection per code review suggestion
This is twice as much code when measured by line, but IMO it is
in fact somewhat clearer to read, so overall a win.
Also adds an improved rule for selecting availability bitfields,
which (unlike the previous implementation) guarantees that the
appropriate postconditions hold there.
* fix bad merge double-declaration
* update guide with (hopefully) complete provisioner candidate selection procedure
* clarify candidate selection algorithm
* Revert "clarify candidate selection algorithm"
This reverts commit c68a02ac9cf42b3a4a28eb197d38633a40d0e3e6.
* clarify candidate selection algorithm
* update provisioner to implement candidate selection per the guide
* add test that no more than one bitfield is selected per validator
* add test that each selected bitfield corresponds to an occupied core
* add test that more set bits win conflicts
* add macro for specializing runtime requests; specailize all runtime requests
* add tests harness for select_candidates tests
* add first real select_candidates test, fix test_harness
* add mock overseer and test that success is possible
* add test that the candidate selection algorithm picks the right ones
* make candidate selection test somewhat more stringent
* propagate chain_api subsystem through various locations
* add ChainApi to AllMessages
Co-authored-by: Peter Goodspeed-Niklaus <peter.r.goodspeedniklaus@gmail.com>
Sergei Shulepov