[litep2p](https://github.com/altonen/litep2p) is a libp2p-compatible P2P
networking library. It supports all of the features of `rust-libp2p`
that are currently being utilized by Polkadot SDK.
Compared to `rust-libp2p`, `litep2p` has a quite different architecture
which is why the new `litep2p` network backend is only able to use a
little of the existing code in `sc-network`. The design has been mainly
influenced by how we'd wish to structure our networking-related code in
Polkadot SDK: independent higher-levels protocols directly communicating
with the network over links that support bidirectional backpressure. A
good example would be `NotificationHandle`/`RequestResponseHandle`
abstractions which allow, e.g., `SyncingEngine` to directly communicate
with peers to announce/request blocks.
I've tried running `polkadot --network-backend litep2p` with a few
different peer configurations and there is a noticeable reduction in
networking CPU usage. For high load (`--out-peers 200`), networking CPU
usage goes down from ~110% to ~30% (80 pp) and for normal load
(`--out-peers 40`), the usage goes down from ~55% to ~18% (37 pp).
These should not be taken as final numbers because:
a) there are still some low-hanging optimization fruits, such as
enabling [receive window
auto-tuning](https://github.com/libp2p/rust-yamux/pull/176), integrating
`Peerset` more closely with `litep2p` or improving memory usage of the
WebSocket transport
b) fixing bugs/instabilities that incorrectly cause `litep2p` to do less
work will increase the networking CPU usage
c) verification in a more diverse set of tests/conditions is needed
Nevertheless, these numbers should give an early estimate for CPU usage
of the new networking backend.
This PR consists of three separate changes:
* introduce a generic `PeerId` (wrapper around `Multihash`) so that we
don't have use `NetworkService::PeerId` in every part of the code that
uses a `PeerId`
* introduce `NetworkBackend` trait, implement it for the libp2p network
stack and make Polkadot SDK generic over `NetworkBackend`
* implement `NetworkBackend` for litep2p
The new library should be considered experimental which is why
`rust-libp2p` will remain as the default option for the time being. This
PR currently depends on the master branch of `litep2p` but I'll cut a
new release for the library once all review comments have been
addresses.
---------
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexandru Vasile <alexandru.vasile@parity.io>
This commit introduces a new concept called `NotificationService` which
allows Polkadot protocols to communicate with the underlying
notification protocol implementation directly, without routing events
through `NetworkWorker`. This implies that each protocol has its own
service which it uses to communicate with remote peers and that each
`NotificationService` is unique with respect to the underlying
notification protocol, meaning `NotificationService` for the transaction
protocol can only be used to send and receive transaction-related
notifications.
The `NotificationService` concept introduces two additional benefits:
* allow protocols to start using custom handshakes
* allow protocols to accept/reject inbound peers
Previously the validation of inbound connections was solely the
responsibility of `ProtocolController`. This caused issues with light
peers and `SyncingEngine` as `ProtocolController` would accept more
peers than `SyncingEngine` could accept which caused peers to have
differing views of their own states. `SyncingEngine` would reject excess
peers but these rejections were not properly communicated to those peers
causing them to assume that they were accepted.
With `NotificationService`, the local handshake is not sent to remote
peer if peer is rejected which allows it to detect that it was rejected.
This commit also deprecates the use of `NetworkEventStream` for all
notification-related events and going forward only DHT events are
provided through `NetworkEventStream`. If protocols wish to follow each
other's events, they must introduce additional abtractions, as is done
for GRANDPA and transactions protocols by following the syncing protocol
through `SyncEventStream`.
Fixes https://github.com/paritytech/polkadot-sdk/issues/512
Fixes https://github.com/paritytech/polkadot-sdk/issues/514
Fixes https://github.com/paritytech/polkadot-sdk/issues/515
Fixes https://github.com/paritytech/polkadot-sdk/issues/554
Fixes https://github.com/paritytech/polkadot-sdk/issues/556
---
These changes are transferred from
https://github.com/paritytech/substrate/pull/14197 but there are no
functional changes compared to that PR
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
This PR moves syncing-related code from `sc-network-common` to
`sc-network-sync`.
Unfortunately, some parts are tightly integrated with networking, so
they were left in `sc-network-common` for now:
1. `SyncMode` in `common/src/sync.rs` (used in `NetworkConfiguration`).
2. `BlockAnnouncesHandshake`, `BlockRequest`, `BlockResponse`, etc. in
`common/src/sync/message.rs` (used in `src/protocol.rs` and
`src/protocol/message.rs`).
More substantial refactoring is needed to decouple syncing and
networking completely, including getting rid of the hardcoded sync
protocol.
## Release notes
Move syncing-related code from `sc-network-common` to `sc-network-sync`.
Delete `ChainSync` trait as it's never used (the only implementation is
accessed directly from `SyncingEngine` and exposes a lot of public
methods that are not part of the trait). Some new trait(s) for syncing
will likely be introduced as part of Sync 2.0 refactoring to represent
syncing strategies.
* update libp2p to 0.52.0
* proto name now must implement `AsRef<str>`
* update libp2p version everywhere
* ToSwarm, FromBehaviour, ToBehaviour
also LocalProtocolsChange and RemoteProtocolsChange
* new NetworkBehaviour invariants
* replace `Vec<u8>` with `StreamProtocol`
* rename ConnectionHandlerEvent::Custom to NotifyBehaviour
* remove DialError & ListenError invariants
also fix pending_events
* use connection_limits::Behaviour
See https://github.com/libp2p/rust-libp2p/pull/3885
* impl `void::Void` for `BehaviourOut`
also use `Behaviour::with_codec`
* KademliaHandler no longer public
* fix StreamProtocol construction
* update libp2p-identify to 0.2.0
* remove non-existing methods from PollParameters
rename ConnectionHandlerUpgrErr to StreamUpgradeError
* `P2p` now contains `PeerId`, not `Multihash`
* use multihash-codetable crate
* update Cargo.lock
* reformat text
* comment out tests for now
* remove `.into()` from P2p
* confirm observed addr manually
See https://github.com/libp2p/rust-libp2p/blob/master/protocols/identify/CHANGELOG.md#0430
* remove SwarmEvent::Banned
since we're not using `ban_peer_id`, this can be safely removed.
we may want to introduce `libp2p::allow_block_list` module in the future.
* fix imports
* replace `libp2p` with smaller deps in network-gossip
* bring back tests
* finish rewriting tests
* uncomment handler tests
* Revert "uncomment handler tests"
This reverts commit 720a06815887f4e10767c62b58864a7ec3a48e50.
* add a fixme
* update Cargo.lock
* remove extra From
* make void uninhabited
* fix discovery test
* use autonat protocols
confirming external addresses manually is unsafe in open networks
* fix SyncNotificationsClogged invariant
* only set server mode manually in tests
doubt that we need to set it on node since we're adding public addresses
* address @dmitry-markin comments
* remove autonat
* removed unused var
* fix EOL
* update smallvec and sha2
in attempt to compile polkadot
* bump k256
in attempt to build cumulus
---------
Co-authored-by: parity-processbot <>
* expose kademlia replication factor through node CLI
* set default CLI flag value for kademlia_replication_factor
Co-authored-by: Bastian Köcher <git@kchr.de>
* wrap CLI value as Option
* make kademlia replication factor non-optional
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* client/network: upgrade to libp2p 0.51.0
* make discovery.rs compile
* make peer_info.rs compile
* changes to notifications and request-response proto
* make service.rs compile
* towards making request_responses.rs compile
* make request_responses.rs compile
* make request_responses.rs compile
* fix notifications/behaviour.rs tests
* fix warnings
* remove old code
* allow deprecated code (temporary)
* upgrade to libp2p 0.51.1
* add TODO for behaviour tests
* return empty vec if peer_id is absent
https://github.com/paritytech/substrate/pull/13587#discussion_r1141695167
fyi: I don't really know what the old behaviour was.
* update comment to reflect new defaults
Closes#13338
* Revert "update comment to reflect new defaults"
This reverts commit 7a981abd69308e9d522ec94905f181439a1b1dba.
* remove config.rs (from wrong merge)
* upgrade to libp2p 0.51.2
* fix formatting
* use handle_pending_outbound_connection in networt_state RPC
* update deps
* use re-exports when we use other libp2p packages
* Apply suggestions from code review
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* format code
* handle potential errors in network_state RPC
* only update libp2p crate
* update libp2p-core
* fix docs
* use libp2p-identity instead of libp2p
where it's possible. libp2p-identity is much smaller, hence makes sense
to use it instead of larger libp2p crate.
* Update client/network/src/discovery.rs
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
* update Cargo.lock
* add comment for per_connection_event_buffer_size
current value is somewhat arbitrary and needs to be tweaked depending on
memory usage and network worker sleep stats.
* fix link format
* update Cargo.lock
* upgrade to libp2p 0.51.3
* deprecate mplex
* Revert "deprecate mplex"
This reverts commit 9e25820e706e464a0e962a8604861fcb2a7641eb.
* Revert "upgrade to libp2p 0.51.3"
This reverts commit 6544dd4138e2f89517bd7c7281fc78a638ec7040.
* use new libp2p version in `statement` crate
* pin version temporarily
* libp2p 0.51.3
* deprecate mplex
* deprecate legacy noise handshake
* fix build error
* update libp2p-identity
* enable libp2p-identity:ed25519 feature in sc-consensus
* enable ed25519 for peerset as well
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
Co-authored-by: parity-processbot <>
* Prepare `sc-network` for `ProtocolController`/`NotificationService`
The upcoming notification protocol refactoring requires that protocols
are able to communicate with `sc-network` over unique and direct links.
This means that `sc-network` side of the link has to be created before
`sc-network` is initialized and that it is allowed to consume the object
as the receiver half of the link may not implement `Clone`.
Remove request-response and notification protocols from `NetworkConfiguration`
and create a new object that contains the configurations of these protocols
and which is consumable by `sc-network`. This is needed needed because, e.g.,
the receiver half of `NotificationService` is not clonable so `sc-network`
must consume it when it's initializing the protocols in `Notifications`.
Similar principe applies to `PeerStore`/`ProtocolController`: as per current
design, protocols are created before the network so `Protocol` cannot be
the one creating the `PeerStore` object. `FullNetworkConfiguration` will be
used to store the objects that `sc-network` will use to communicate with
protocols and it will also allow protocols to allocate handles so they
can directly communicate with `sc-network`.
* Fixes
* Update client/service/src/builder.rs
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Updates
* Doc updates + cargo-fmt
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Attempt to relieve pressure on `mpsc_network_worker`
`SyncingEngine` interacting with `NetworkWorker` can put a lot of strain
on the channel if the number of inbound connections is high. This is
because `SyncingEngine` is notified of each inbound substream which it
then can either accept or reject and this causes a lot of message
exchange on the already busy channel.
Use a direct channel pair between `Protocol` and `SyncingEngine`
to exchange notification events. It is a temporary change to alleviate
the problems caused by syncing being an independent protocol and the
fix will be removed once `NotificationService` is implemented.
* Apply review comments
* fixes
* trigger ci
* Fix tests
Verify that both peers have a connection now that the validation goes
through `SyncingEngine`. Depending on how the tasks are scheduled,
one of them might not have the peer registered in `SyncingEngine` at which
point the test won't make any progress because block announcement received
from an unknown peer is discarded.
Move polling of `ChainSync` at the end of the function so that if a block
announcement causes a block request to be sent, that can be sent in the
same call to `SyncingEngine::poll()`.
---------
Co-authored-by: parity-processbot <>
* Move service tests to `client/network/tests`
These tests depend on `sc-network` and `sc-network-sync` so they should
live outside the crate.
* Move some configs from `sc-network-common` to `sc-network`
* Move `NetworkService` traits to `sc-network`
* Move request-responses to `sc-network`
* Remove more stuff
* Remove rest of configs from `sc-network-common` to `sc-network`
* Remove more stuff
* Fix warnings
* Update client/network/src/request_responses.rs
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Fix cargo doc
---------
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
* Move import queue out of `sc-network`
Add supplementary asynchronous API for the import queue which means
it can be run as an independent task and communicated with through
the `ImportQueueService`.
This commit removes removes block and justification imports from
`sc-network` and provides `ChainSync` with a handle to import queue so
it can import blocks and justifications. Polling of the import queue is
moved complete out of `sc-network` and `sc_consensus::Link` is
implemented for `ChainSyncInterfaceHandled` so the import queue
can still influence the syncing process.
* Move stuff to SyncingEngine
* Move `ChainSync` instanation to `SyncingEngine`
Some of the tests have to be rewritten
* Move peer hashmap to `SyncingEngine`
* Let `SyncingEngine` to implement `ChainSyncInterface`
* Introduce `SyncStatusProvider`
* Move `sync_peer_(connected|disconnected)` to `SyncingEngine`
* Implement `SyncEventStream`
Remove `SyncConnected`/`SyncDisconnected` events from
`NetworkEvenStream` and provide those events through
`ChainSyncInterface` instead.
Modify BEEFY/GRANDPA/transactions protocol and `NetworkGossip` to take
`SyncEventStream` object which they listen to for incoming sync peer
events.
* Introduce `ChainSyncInterface`
This interface provides a set of miscellaneous functions that other
subsystems can use to query, for example, the syncing status.
* Move event stream polling to `SyncingEngine`
Subscribe to `NetworkStreamEvent` and poll the incoming notifications
and substream events from `SyncingEngine`.
The code needs refactoring.
* Make `SyncingEngine` into an asynchronous runner
This commits removes the last hard dependency of syncing from
`sc-network` meaning the protocol now lives completely outside of
`sc-network`, ignoring the hardcoded peerset entry which will be
addressed in the future.
Code needs a lot of refactoring.
* Fix warnings
* Code refactoring
* Use `SyncingService` for BEEFY
* Use `SyncingService` for GRANDPA
* Remove call delegation from `NetworkService`
* Remove `ChainSyncService`
* Remove `ChainSync` service tests
They were written for the sole purpose of verifying that `NetworWorker`
continues to function while the calls are being dispatched to
`ChainSync`.
* Refactor code
* Refactor code
* Update client/finality-grandpa/src/communication/tests.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Fix warnings
* Apply review comments
* Fix docs
* Fix test
* cargo-fmt
* Update client/network/sync/src/engine.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Update client/network/sync/src/engine.rs
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Add missing docs
* Refactor code
---------
Co-authored-by: Anton <anton.kalyaev@gmail.com>
* Change copyright year to 2023 from 2022
* Fix incorrect update of copyright year
* Remove years from copy right header
* Fix remaining files
* Fix typo in a header and remove update-copyright.sh
* Rename `*-private-ipv4` to `*-private-ip` CLI args
Renames the `*-private-ipv4` to `*-private-ip` in the CLI interface. The old names are staying as
alias, thus it will not break for anyone. Besides that it also fixes the naming in the rest of the code.
* FMT
* Move import queue out of `sc-network`
Add supplementary asynchronous API for the import queue which means
it can be run as an independent task and communicated with through
the `ImportQueueService`.
This commit removes removes block and justification imports from
`sc-network` and provides `ChainSync` with a handle to import queue so
it can import blocks and justifications. Polling of the import queue is
moved complete out of `sc-network` and `sc_consensus::Link` is
implemented for `ChainSyncInterfaceHandled` so the import queue
can still influence the syncing process.
* Fix tests
* Apply review comments
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <git@kchr.de>
* Update client/network/sync/src/lib.rs
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Bastian Köcher <git@kchr.de>
* Replace deprecated libp2p feature specs with correct ones
* Bump tokio to 1.21.2
* Replace async-std libp2p primitives with tokio ones
* minor: rustfmt
* Fix TestNet to run initialization in the tokio context
* Convert telemetry test from async-std to tokio
* Convert notifications tests from async-std to tokio
* Convert chain sync tests from async-std to tokio
* Ditch async-std completely
* Make executor mandatory
* Bump tokio to 1.22.0
* minor: rustfmt
* Explicitly use tokio runtime in tests
* Move more tests to explicit tokio runtime
* Explicitly set multithreaded runtime in tokio test
* minor: rustfmt
* minor: fix comment
* Replace async-std with tokio in MMR tests
* cargo upgrade libp2p
* Get rid of `NetworkBehaviourEventProcess` in handling of `CustomMessageOutcome`
* Get rid of `NetworkBehaviourEventProcess` in handling of `request_responses::Event`
* Get rid of `NetworkBehaviourEventProcess` in handling of `peer_info::PeerInfoEvent`
* Get rid of `NetworkBehaviourEventProcess` in handling of `DiscoveryOut`
* Get rid of `poll()` method in `Bahaviour`
* minor: comments
* Upgrade libp2p to 0.49.0 (unreleased)
* Support multiple Kad protocol names
* Make borrow checker happy
* minor: wording
* Make substrate build with libp2p-0.49.0
* rustfmt
* Get rid of MdnsWrapper
* Resolve deprecation warnings
* Fix documentation
* Apply suggestions from code review: fix typos
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
* Apply suggestion: simplify kad protocol name matching
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
* Introduce `ChainSyncInterface`
`ChainSyncInterface` provides an asynchronous interface for other
subsystems to submit calls to `ChainSync`. This allows `NetworkService`
to delegate calls to `ChainSync` while still providing the same API
for other subsystems (for now). This makes it possible to move the
syncing code in piecemeal fashion out of `protocol.rs` as the calls
are just forwarded to `ChainSync`.
* Apply review comments
* Fix tests
* Use `array-bytes` for All Array/Bytes/Hex Operations
Signed-off-by: Xavier Lau <xavier@inv.cafe>
* Reorder
* Self Review
* Format
* Fix Tests
* Bump `array-bytes`
* Optimize large test res
Signed-off-by: Xavier Lau <xavier@inv.cafe>
Co-authored-by: parity-processbot <>
* Introduce `sc-network-bitswap`
Move the bitswap protocol out of `sc-network` to its own crate.
* Improve test coverage
* Remove mention of bitswap from `sc-network`
* Fix documentation
* Fix clippy and remove the void dependency
* Remove unneeded trait bound and bump prost to 0.11
* Add ProtocolName custom type
* Use new ProtocolName in sc_network_common
* Use new ProtocolName in sc_network
* Use new ProtocolName for BEEFY and GRANDPA
* Use new ProtocolName for notifications
* Use new ProtocolName in sc_network (part 2)
* Use new ProtocolName in sc_network_gossip
* Use new ProtocolName in sc_offchain
* Remove unused imports
* Some more fixes
* Add tests
* Fix minor import issues
* Re-export ProtocolName in sc_network
* Revert "Re-export ProtocolName in sc_network"
This reverts commit 8d8ff71927e7750757f29c9bbd88dc0ba181d214.
* Re-export ProtocolName in sc_network
* Remove dependency on sc-network-common from beefy-gadget
* Move `MultiaddrWithPeerId` and related parsing functions into `sc-network-common`, remove dependency on `sc-network` from `sc-chain-spec`
* Remove dependency on `sc-network` from `sc-offchain`
* Remove dependency on `sc-network` from `sc-network-gossip`
* Rename transactions protocol to include genesis hash
* Add protocol name generation to sc_network::utils
* Use utils functions for transactions protocol name generation
* Extract protocol name generation into public module
* Use sc_network::protocol_name::standard_protocol_name() for BEEFY and GRANDPA
* minor: add missing newline at EOF
* Change block-announces protocol name to include genesis_hash & fork_id
* Change protocol names to include genesis hash and fork id
Protocols changed:
- sync
- state
- light
- sync/warp
* Revert "Use sc_network::protocol_name::standard_protocol_name() for BEEFY and GRANDPA"
This reverts commit cd60a95a3face397e1b67f4bc95dd0f2b581bfae.
* Get rid of `protocol_name` module
* Remove direct dependency of `sc-network` on `sc-network-light`
* Move `WarpSyncProvider` trait and surrounding data structures into `sc-network-common`
* Move `WarpSyncProvider` trait and surrounding data structures into `sc-network-common`
* Create `sync` module in `sc-network-common`, create `ChainSync` trait there (not used yet), move a bunch of associated data structures from `sc-network-sync`
* Switch from concrete implementation to `ChainSync` trait from `sc-network-common`
* Introduce `OpaqueStateRequest`/`OpaqueStateResponse` to remove generics from `StateSync` trait
* Introduce `OpaqueBlockRequest`/`OpaqueBlockResponse`, make `scheme` module of `sc-network-sync` private
* Surface `sc-network-sync` into `sc-service` and make `sc-network` not depend on it anymore
* Remove now unnecessary dependency from `sc-network`
* Replace crate links with just text since dependencies are gone now
* Remove `warp_sync` re-export from `sc-network-common`
* Update copyright in network-related files
* Address review comments about documentation
* Apply review suggestion
* Rename `extra_requests` module to `metrics`
Co-authored-by: Bastian Köcher <info@kchr.de>
* Move `api.v1.proto` schema into new crate `sc-network-sync`
* Move `sc_network::protocol::sync::state` module into `sc_network_sync::state`
* Move `sc_network::protocol::sync::blocks` module into `sc_network_sync::blocks` and some data structures from `sc_network::protocol::message` module into `sc_network_sync::message`
* Move some data structures from `sc_network::config` and `sc_network::request_responses` into new `sc-network-common` crate
* Move `sc_network::protocol::sync::warm` and `sc_network::warp_request_handler` modules into `sc_network_sync`
* Move `client/network/sync/src/lib.rs` to `client/network/sync/src/lib_old.rs` to preserve history of changes of the file in the next commit
* Move `client/network/src/protocol/sync.rs` on top of `client/network/sync/src/lib.rs` to preserve history of changes
* Move `sc_network::protocol::sync` to `sc_network_sync` with submodules, move message data structures around accordingly
* Move `sc_network::block_request_handler` to `sc_network_sync::block_request_handler`
* Move `sc_network::state_request_handler` to `sc_network_sync::state_request_handler`
* Add re-exports for compatibility reasons
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Remove unnecessary imports, move one internal re-export into where it is actually used, make one import explicit
* Move a few data structures down into modules
* Use generic parameters in `sc-network` instead of `chain::Client` trait
* Remove unnecessary bound
* sc-cli: Fix bugs after switching to clap3
Before switching to clap3 we support cli options like `--reserved-nodes A B` and after you needed to
pass `--reserved-nodes` cli option multiple times `--reserved-nodes A --reserved-nodes B`. This is
fixed by setting `multiple_occurrences(true)` option. This also done for all the other `Vec` cli
options in `sc-cli`. Besides that `--sync` wasn't supporting case insensitive parsing of the value.
This is now also supported. For both regressions a test is added. Besides that the pr removes all
the `rename_all = PascalCase` attributes, because they are not needed. All other `ArgEnum`s were
checked and all are already using `ignore_case(true)`.
* Bring back `PascalCase`, because otherwise it falls back to `kebab-case`...
* grandpa: update notif protocol name
* grandpa: add chain id prefix to protocol name
* grandpa: beautify protocol name handling
* grandpa: prepend genesis hash to protocol name
* chain-spec: add optional 'fork_id'
'fork_id' is used to uniquely identify forks of the same chain/network
'ChainSpec' trait provides default 'None' implementation, meaning this
chain hasn't been forked.
* grandpa: protocol_name mod instead of struct
* beefy: add genesis hash prefix to protocol name
* chainspec: add fork_id
* grandpa: simplify protocol name
* grandpa: contain protocol name building logic
* beefy: contain protocol name building logic
* grandpa: fix tests
* fix merge damage
* fix docs reference visibility
Signed-off-by: acatangiu <adrian@parity.io>
* Update client/finality-grandpa/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Update client/finality-grandpa/src/communication/mod.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Update client/beefy/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Update client/beefy/src/lib.rs
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* avoid using hash default, even for protocol names
Co-authored-by: Tomasz Drwięga <tomusdrw@users.noreply.github.com>
* Clean up sc-network
- Avoid using clone() for the Copy type `PeerId`.
- Use `find_map` for `filter_map` and `next`.
- Use `Self`.
* More on Copy types
* Cargo +nightly fmt --all
* More ..
* fmt
* Revert vec![default_notif_handshake_message]
* Comment out browser stuff
* Remove browser stuff
* Remove more wasm transport code
* Remove ExtTransport and rework how telemetry initialises.
* Change (most) wasm-timer using code to use std::time
* Rename CI-job
* Aura does not compile for wasm
* Remove testing in the browser on CI
* Update README
* Leave `StreamSink` be
* fmt
Aaro Altonen