* Move `api.v1.proto` schema into new crate `sc-network-sync`
* Move `sc_network::protocol::sync::state` module into `sc_network_sync::state`
* Move `sc_network::protocol::sync::blocks` module into `sc_network_sync::blocks` and some data structures from `sc_network::protocol::message` module into `sc_network_sync::message`
* Move some data structures from `sc_network::config` and `sc_network::request_responses` into new `sc-network-common` crate
* Move `sc_network::protocol::sync::warm` and `sc_network::warp_request_handler` modules into `sc_network_sync`
* Move `client/network/sync/src/lib.rs` to `client/network/sync/src/lib_old.rs` to preserve history of changes of the file in the next commit
* Move `client/network/src/protocol/sync.rs` on top of `client/network/sync/src/lib.rs` to preserve history of changes
* Move `sc_network::protocol::sync` to `sc_network_sync` with submodules, move message data structures around accordingly
* Move `sc_network::block_request_handler` to `sc_network_sync::block_request_handler`
* Move `sc_network::state_request_handler` to `sc_network_sync::state_request_handler`
* Add re-exports for compatibility reasons
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Remove unnecessary imports, move one internal re-export into where it is actually used, make one import explicit
* Move a few data structures down into modules
* Use generic parameters in `sc-network` instead of `chain::Client` trait
* Remove unnecessary bound
* Finality notification: Optimize calculation of stale heads
While looking into some problem on Versi where a collator seemed to be stuck. I found out that it
was not stuck but there was a huge gap between last finalized and best block. This lead to a lot
leaves and it was basically trapped inside some loop of reading block headers from the db to find
the stale heads. While looking into this I found out that `leaves` already supports the feature to
give us the stale heads relative easily. However, the semantics change a little bit. Instead of
returning all stale heads of blocks that are not reachable anymore after finalizing a block, we
currently only return heads with a number lower than the finalized block. This should be no problem,
because these other leaves that are stale will be returned later when a block gets finalized which
number is bigger than the block number of these leaves.
While doing that, I also changed `tree_route` of the `FinalityNotification` to include the
`old_finalized`. Based on the comment I assumed that this was already part of it. However, if
wanted, I can revert this change.
* FMT
* Update client/service/src/client/client.rs
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
* Do not include the last finalized block
* Rename function
* FMT
* Fix tests
* Update figure
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
* Add new hardware and software metrics
* Move sysinfo tests into `mod tests`
* Correct a typo in a comment
* Remove unnecessary `nix` dependency
* Fix the version tests
* Add a `--disable-hardware-benchmarks` CLI argument
* Disable hardware benchmarks in the integration tests
* Remove unused import
* Fix benchmarks compilation
* Move code to a new `sc-sysinfo` crate
* Correct `impl_version` comment
* Move `--disable-hardware-benchmarks` to the chain-specific bin crate
* Move printing out of hardware bench results to `sc-sysinfo`
* Move hardware benchmarks to a separate messages; trigger them manually
* Rename some of the fields in the `HwBench` struct
* Revert changes to the telemetry crate; manually send hwbench messages
* Move sysinfo logs into the sysinfo crate
* Move the `TARGET_OS_*` constants into the sysinfo crate
* Minor cleanups
* Move the `HwBench` struct to the sysinfo crate
* Derive `Clone` for `HwBench`
* Fix broken telemetry connection notification stream
* Prevent the telemetry connection notifiers from leaking if they're disconnected
* Turn the telemetry notification failure log into a debug log
* Rename `--disable-hardware-benchmarks` to `--no-hardware-benchmarks`
* Prepare for rust stable 1.59
Besides preparing the UI tests this also adds a new script update-rust-stable.sh script for
simplifying the update of a rust stable version. This script will run all UI tests for the new
rust stable version and updating the expected output.
* Ensure we run the UI tests in CI
* use staging ci image
* More test updates
* Unignore test (#11097)
* empty commit for pipeline rerun
* empty commit for pipeline rerun
* Try to make clippy happy
* More clippy fixes
* FMT
* ci image production
Co-authored-by: alvicsam <alvicsam@gmail.com>
Co-authored-by: Alexander Samusev <41779041+alvicsam@users.noreply.github.com>
* import-blocks: Do not read `stdin` to memory
This fixes a bug with `import-blocks` reading the entire `stdin` before starting to import the
blocks. However, for huge files that uses quite a lot of memory. We can just read from `stdin` step
by step as we do it with a file. This ensures that we don't read the entire input at once into memory.
* FMT
* Fix warning
* #10576: refactor `sc-utils::notification` and `sc-client-api::notifications`, so that they use common subscribe/unsubscribe routines
* Add some docs. Reorganise `sc-utils::notification`
* `sc-clent-api::notifications` and `sc-utils::notification` — ensure the SubscriptionGuard is dropped before the Rx-channel
* `sc-utils::pubsub::SubscriptionGuard` make it a bit more ergonomic.
Let the `Rx` to be put inside of the `SubscriptionGuard`, so that the latter shall guarantee the order:
- first unsubscribe;
- then drop the `Rx`.
* Being less zealous with splitting the modules into little pieces
* rework pubsub: the concrete usage should only define a good registry type
* sc-client-api::notifications: make it comply with the reworked pubsub
* cargo fmt
* make sc-client-api tests work
* Address the review notes
* cargo fmt
* Describe the behaviour of pubsub registry
* Doc-comments for module `sc-utils::pubsub`
* Fix: it used to send notifications regardless of the filter setup during subscription
* `sc-client-api::StorageNotifications` the API does not have to require mut-self-reference.
As a result `sc-service::Client` does not have to wrap its `storage_notifications` into a Mutex.
* cargo fmt
* Several changes addressing the notes by @bckhr.
- Remove the `impl Default for StorageNotifications<Block>`;
- no need for groupping the `remove_from` and `listen_from` into a separate `helpers` module;
- remove unnecessary import `use registry::SubscribeOp`.
* Add a doc-comment to the `sc-client::notifications::SubscribeOp`
* As per @bkchr note on the unproven assertion: behave gracefully upon receiving a duplicate subscription-ID.
* sc-utils::pubsub: log when a registry yields an ID that does point to an existing sink
* `sc-utils::notifications`: payload materialized lazily
* Update Cargo.lock (after adding `log` as a dependency to the `sc-utils`)
* `sc-client-api::notifications`: introduce a struct (instead of a type def) for the notification message
* Get rid of `sc-utils::pubsub::Channel` trait (instead just use the `sc-utils::mpsc`)
* The SubsID is no more generic: the fact it is a `Copy` is known — no need to pass it by ref
* sc-utils::pubsub internals do not have to be generic over the channel type
* Rename Hub::dispatch into Hub::send
* That method was unnecessary (`SubscriberSink::render_notification`)
* cargo fmt
* No need for a separate UnsubscribeGuard type
* Ditch the type-def of SubsID in the sc-utils::pubsub, instead — just use the crate::id_sequence::SeqID
* Return the <Registry as Dispatch>::Ret when sending an item
* Make the `Hub<M, R>::lock_registry(...)` method more ergonomic
* cargo doc links
* cargo doc links
* Use a simpler name for the type
* cargo doc links
* Derive `Default` rather than implement it
* Derive `Default` rather than implement it
* Remove an unnecessary usage of type_name
* Define a more cautious order between sinks.remove->registry.unsubscribe and registry.subscribe->sinks.insert
* Hub: lock_registry_for_tests->map_registry_for_tests — a safer choice for a public API
* Replace Mutex over the shared Registry with a ReentrableMutex+RefCell
* sc-utils::pubsub: add tests for a panicking registry
* Add the missing copyright headers
* Arc<Vec<_>> -> Arc<[_]>
* Upgraded dependencies
* Adapting code to scale v3
* Empty commit to trigger CI
* Triggering CI
* Fixing UI test
* Remove superfluous dev-dep added by #9228
* Cryout for CI
* Clean obsolete BABE weight data
* Take out test assertion from check closure
* Optimize metadata access using `HeaderMetadata` trait
* Apply suggestions from code review
* Introduce finalize and import pre-commit synchronous actions
* Do not hold locks between internal methods calls
* Remove unused generic bound
* Apply suggestions from code review
* Register BABE's pre-commit actions on `block_import` instead of `start_babe`
* PreCommit actions should be `Fn` instead of `FnMut`
* More robust safenet in case of malformed finality notifications
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
* Add a new host function for reporting fatal errors
* Fix one of the wasmtime executor tests
* Have `#[runtime_interface(wasm_only)]` actually mean WASM-only, and not no_std-only
* Print out errors through `Display` instead of `Debug`
* Switch one more trait to require `Error` for its error instead of only `Debug`
* Align to review comments
* Add stale branches heads to finality notifications
Warning. Previous implementation was sending a notification for
each block between the previous (explicitly) finalized block and
the new finalized one (with an hardcoded limit of 256).
Now finality notification is sent only for the new finalized head and it
contains the hash of the new finalized head, new finalized head header,
a list of all the implicitly finalized blocks and a list of stale
branches heads (i.e. the branches heads that are not part of the
canonical chain anymore).
* Add implicitly finalized blocks list to `ChainEvent::Finalized` message
The list contains all the blocks between the previously finalized block
up to the parent of the currently finalized one, sorted by block number.
`Finalized` messages handler, part of the `MaintainedTransactionPool`
implementation for `BasicPool`, still propagate full set of finalized
blocks to the txpool by iterating over implicitly finalized blocks list.
* Rust fmt
* Greedy evaluation of `stale_heads` during finalization
* Fix outdated assumption in a comment
* Removed a test optimization that is no more relevant
The loop was there to prevent sending to
`peer.network.on_block_finalized` the full list of finalized blocks.
Now only the finalized heads are received.
* Last finalized block lookup not required anymore
* Tests for block finality notifications payloads
* Document a bit tricky condition to avoid duplicate finalization notifications
* More idiomatic way to skip an iterator entry
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Cargo fmt iteration
* Typo fix
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Fix potential failure when a finalized orphan block is imported
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
Co-authored-by: Bastian Köcher <bkchr@users.noreply.github.com>
* starting
* Updated from other branch.
* setting flag
* flag in storage struct
* fix flagging to access and insert.
* added todo to fix
* also missing serialize meta to storage proof
* extract meta.
* Isolate old trie layout.
* failing test that requires storing in meta when old hash scheme is used.
* old hash compatibility
* Db migrate.
* runing tests with both states when interesting.
* fix chain spec test with serde default.
* export state (missing trie function).
* Pending using new branch, lacking genericity on layout resolution.
* extract and set global meta
* Update to branch 4
* fix iterator with root flag (no longer insert node).
* fix trie root hashing of root
* complete basic backend.
* Remove old_hash meta from proof that do not use inner_hashing.
* fix trie test for empty (force layout on empty deltas).
* Root update fix.
* debug on meta
* Use trie key iteration that do not include value in proofs.
* switch default test ext to use inner hash.
* small integration test, and fix tx cache mgmt in ext.
test failing
* Proof scenario at state-machine level.
* trace for db upgrade
* try different param
* act more like iter_from.
* Bigger batches.
* Update trie dependency.
* drafting codec changes and refact
* before removing unused branch no value alt hashing.
more work todo rename all flag var to alt_hash, and remove extrinsic
replace by storage query at every storage_root call.
* alt hashing only for branch with value.
* fix trie tests
* Hash of value include the encoded size.
* removing fields(broken)
* fix trie_stream to also include value length in inner hash.
* triedbmut only using alt type if inner hashing.
* trie_stream to also only use alt hashing type when actually alt hashing.
* Refactor meta state, logic should work with change of trie treshold.
* Remove NoMeta variant.
* Remove state_hashed trigger specific functions.
* pending switching to using threshold, new storage root api does not
make much sense.
* refactoring to use state from backend (not possible payload changes).
* Applying from previous state
* Remove default from storage, genesis need a special build.
* rem empty space
* Catch problem: when using triedb with default: we should not revert
nodes: otherwhise thing as trie codec cannot decode-encode without
changing state.
* fix compilation
* Right logic to avoid switch on reencode when default layout.
* Clean up some todos
* remove trie meta from root upstream
* update upstream and fix benches.
* split some long lines.
* UPdate trie crate to work with new design.
* Finish update to refactored upstream.
* update to latest triedb changes.
* Clean up.
* fix executor test.
* rust fmt from master.
* rust format.
* rustfmt
* fix
* start host function driven versioning
* update state-machine part
* still need access to state version from runtime
* state hash in mem: wrong
* direction likely correct, but passing call to code exec for genesis
init seem awkward.
* state version serialize in runtime, wrong approach, just initialize it
with no threshold for core api < 4 seems more proper.
* stateversion from runtime version (core api >= 4).
* update trie, fix tests
* unused import
* clean some TODOs
* Require RuntimeVersionOf for executor
* use RuntimeVersionOf to resolve genesis state version.
* update runtime version test
* fix state-machine tests
* TODO
* Use runtime version from storage wasm with fast sync.
* rustfmt
* fmt
* fix test
* revert useless changes.
* clean some unused changes
* fmt
* removing useless trait function.
* remove remaining reference to state_hash
* fix some imports
* Follow chain state version management.
* trie update, fix and constant threshold for trie layouts.
* update deps
* Update to latest trie pr changes.
* fix benches
* Verify proof requires right layout.
* update trie_root
* Update trie deps to latest
* Update to latest trie versioning
* Removing patch
* update lock
* extrinsic for sc-service-test using layout v0.
* Adding RuntimeVersionOf to CallExecutor works.
* fmt
* error when resolving version and no wasm in storage.
* use existing utils to instantiate runtime code.
* Patch to delay runtime switch.
* Revert "Patch to delay runtime switch."
This reverts commit 67e55fee468f1a0cda853f5362b22e0d775786da.
* useless closure
* remove remaining state_hash variables.
* Remove outdated comment
* useless inner hash
* fmt
* fmt and opt-in feature to apply state change.
* feature gate core version, use new test feature for node and test node
* Use a 'State' api version instead of Core one.
* fix merge of test function
* use blake macro.
* Fix state api (require declaring the api in runtime).
* Opt out feature, fix macro for io to select a given version
instead of latest.
* run test nodes on new state.
* fix
* Apply review change (docs and error).
* fmt
* use explicit runtime_interface in doc test
* fix ui test
* fix doc test
* fmt
* use default for path and specname when resolving version.
* small review related changes.
* doc value size requirement.
* rename old_state feature
* Remove macro changes
* feature rename
* state version as host function parameter
* remove flag for client api
* fix tests
* switch storage chain proof to V1
* host functions, pass by state version enum
* use WrappedRuntimeCode
* start
* state_version in runtime version
* rust fmt
* Update storage proof of max size.
* fix runtime version rpc test
* right intent of convert from compat
* fix doc test
* fix doc test
* split proof
* decode without replay, and remove some reexports.
* Decode with compatibility by default.
* switch state_version to u8. And remove RuntimeVersionBasis.
* test
* use api when reading embedded version
* fix decode with apis
* extract core version instead
* test fix
* unused import
* review changes.
Co-authored-by: kianenigma <kian@parity.io>
* Introduce `SecretUri`
* `inspect-key`: Adds support for `expect-public`
`expect-public` can be used to check that a given secret uri corresponds to the given public key.
This is mainly useful when the secret uri is protected by a password and a new derived account
should be generated. With `--expect-public` the user can pass the public key/account-id of the
"base" secret uri aka the one without any derivation to ensure the correct password was inserted.
* Fixes
* 🤦
* Apply suggestions from code review
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
* Review feedback
* FMT
* Bump the versions
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
This adds support to the wasm-override feature to compare the spec_name. If the spec_name doesn't
match, a warning will be printed and the override will be ignored.
Shawn Tabrizi