In preparation for the merkleized metadata, we need to ensure that
constants are actually constant. If we want to test the unsigned phase
we could for example just disable signed voter. Or we add some extra
mechanism to the pallet to disable the signed phase from time to time.
---------
Co-authored-by: Ankan <10196091+Ank4n@users.noreply.github.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
**Update:** Pushed additional changes based on the review comments.
**This pull request fixes various spelling mistakes in this
repository.**
Most of the changes are contained in the first **3** commits:
- `Fix spelling mistakes in comments and docs`
- `Fix spelling mistakes in test names`
- `Fix spelling mistakes in error messages, panic messages, logs and
tracing`
Other source code spelling mistakes are separated into individual
commits for easier reviewing:
- `Fix the spelling of 'authority'`
- `Fix the spelling of 'REASONABLE_HEADERS_IN_JUSTIFICATION_ANCESTRY'`
- `Fix the spelling of 'prev_enqueud_messages'`
- `Fix the spelling of 'endpoint'`
- `Fix the spelling of 'children'`
- `Fix the spelling of 'PenpalSiblingSovereignAccount'`
- `Fix the spelling of 'PenpalSudoAccount'`
- `Fix the spelling of 'insufficient'`
- `Fix the spelling of 'PalletXcmExtrinsicsBenchmark'`
- `Fix the spelling of 'subtracted'`
- `Fix the spelling of 'CandidatePendingAvailability'`
- `Fix the spelling of 'exclusive'`
- `Fix the spelling of 'until'`
- `Fix the spelling of 'discriminator'`
- `Fix the spelling of 'nonexistent'`
- `Fix the spelling of 'subsystem'`
- `Fix the spelling of 'indices'`
- `Fix the spelling of 'committed'`
- `Fix the spelling of 'topology'`
- `Fix the spelling of 'response'`
- `Fix the spelling of 'beneficiary'`
- `Fix the spelling of 'formatted'`
- `Fix the spelling of 'UNKNOWN_PROOF_REQUEST'`
- `Fix the spelling of 'succeeded'`
- `Fix the spelling of 'reopened'`
- `Fix the spelling of 'proposer'`
- `Fix the spelling of 'InstantiationNonce'`
- `Fix the spelling of 'depositor'`
- `Fix the spelling of 'expiration'`
- `Fix the spelling of 'phantom'`
- `Fix the spelling of 'AggregatedKeyValue'`
- `Fix the spelling of 'randomness'`
- `Fix the spelling of 'defendant'`
- `Fix the spelling of 'AquaticMammal'`
- `Fix the spelling of 'transactions'`
- `Fix the spelling of 'PassingTracingSubscriber'`
- `Fix the spelling of 'TxSignaturePayload'`
- `Fix the spelling of 'versioning'`
- `Fix the spelling of 'descendant'`
- `Fix the spelling of 'overridden'`
- `Fix the spelling of 'network'`
Let me know if this structure is adequate.
**Note:** The usage of the words `Merkle`, `Merkelize`, `Merklization`,
`Merkelization`, `Merkleization`, is somewhat inconsistent but I left it
as it is.
~~**Note:** In some places the term `Receival` is used to refer to
message reception, IMO `Reception` is the correct word here, but I left
it as it is.~~
~~**Note:** In some places the term `Overlayed` is used instead of the
more acceptable version `Overlaid` but I also left it as it is.~~
~~**Note:** In some places the term `Applyable` is used instead of the
correct version `Applicable` but I also left it as it is.~~
**Note:** Some usage of British vs American english e.g. `judgement` vs
`judgment`, `initialise` vs `initialize`, `optimise` vs `optimize` etc.
are both present in different places, but I suppose that's
understandable given the number of contributors.
~~**Note:** There is a spelling mistake in `.github/CODEOWNERS` but it
triggers errors in CI when I make changes to it, so I left it as it
is.~~
Closes#2160
First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)
Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.
Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)
Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
- Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
- Signed transactions (with a hardcoded signature).
- General transactions (without a hardcoded signature).
`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.
There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).
Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.
For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.
## Code Migration
### NOW: Getting it to build
Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:
```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
/* snip */
MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```
After:
```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
/* snip */
AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```
You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let extra: SignedExtra = (
/* snip */
MySpecialSignedExtension::new(/* snip */),
);
let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
extra,
)
}
```
After:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let tx_ext: TxExtension = (
/* snip */
MySpecialSignedExtension::new(/* snip */).into(),
);
let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
tx_ext,
)
}
```
### SOON: Migrating to `TransactionExtension`
Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.
- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.
#### `TransactionExtensionBase`
This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.
#### `TransactionExtension`
Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.
Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.
Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)
Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.
If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.
## TODO
- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
- [x] `ChargeTransactionPayment`
- [x] `DummyExtension`
- [x] `ChargeAssetTxPayment` (asset-tx-payment)
- [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
- [x] `CheckWeight`
- [x] `CheckTxVersion`
- [x] `CheckSpecVersion`
- [x] `CheckNonce`
- [x] `CheckNonZeroSender`
- [x] `CheckMortality`
- [x] `CheckGenesis`
- [x] `CheckOnlySudoAccount`
- [x] `WatchDummy`
- [x] `PrevalidateAttests`
- [x] `GenericSignedExtension`
- [x] `SignedExtension` (chain-polkadot-bulletin)
- [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
- [ ]
- [x] Fix any broken tests.
---------
Signed-off-by: georgepisaltu <george.pisaltu@parity.io>
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Signed-off-by: Alexandru Gheorghe <alexandru.gheorghe@parity.io>
Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>
Co-authored-by: Nikhil Gupta <17176722+gupnik@users.noreply.github.com>
Co-authored-by: georgepisaltu <52418509+georgepisaltu@users.noreply.github.com>
Co-authored-by: Chevdor <chevdor@users.noreply.github.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Maciej <maciej.zyszkiewicz@parity.io>
Co-authored-by: Javier Viola <javier@parity.io>
Co-authored-by: Marcin S. <marcin@realemail.net>
Co-authored-by: Tsvetomir Dimitrov <tsvetomir@parity.io>
Co-authored-by: Javier Bullrich <javier@bullrich.dev>
Co-authored-by: Koute <koute@users.noreply.github.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: Vladimir Istyufeev <vladimir@parity.io>
Co-authored-by: Ross Bulat <ross@parity.io>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Svyatoslav Nikolsky <svyatonik@gmail.com>
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: s0me0ne-unkn0wn <48632512+s0me0ne-unkn0wn@users.noreply.github.com>
Co-authored-by: ordian <write@reusable.software>
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexander Samusev <41779041+alvicsam@users.noreply.github.com>
Co-authored-by: Julian Eager <eagr@tutanota.com>
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: yjh <yjh465402634@gmail.com>
Co-authored-by: Tom Mi <tommi@niemi.lol>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <79228812+paradox-tt@users.noreply.github.com>
Co-authored-by: Bastian Köcher <info@kchr.de>
Co-authored-by: Joshy Orndorff <JoshOrndorff@users.noreply.github.com>
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
Co-authored-by: PG Herveou <pgherveou@gmail.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Juan Girini <juangirini@gmail.com>
Co-authored-by: bader y <ibnbassem@gmail.com>
Co-authored-by: James Wilson <james@jsdw.me>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
Co-authored-by: Parth <desaiparth08@gmail.com>
Co-authored-by: Andrew Jones <ascjones@gmail.com>
Co-authored-by: Jonathan Udd <jonathan@dwellir.com>
Co-authored-by: Serban Iorga <serban@parity.io>
Co-authored-by: Egor_P <egor@parity.io>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Evgeny Snitko <evgeny@parity.io>
Co-authored-by: Just van Stam <vstam1@users.noreply.github.com>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
Co-authored-by: dzmitry-lahoda <dzmitry@lahoda.pro>
Co-authored-by: zhiqiangxu <652732310@qq.com>
Co-authored-by: Nazar Mokrynskyi <nazar@mokrynskyi.com>
Co-authored-by: Anwesh <anweshknayak@gmail.com>
Co-authored-by: cheme <emericchevalier.pro@gmail.com>
Co-authored-by: Sam Johnson <sam@durosoft.com>
Co-authored-by: kianenigma <kian@parity.io>
Co-authored-by: Jegor Sidorenko <5252494+jsidorenko@users.noreply.github.com>
Co-authored-by: Muharem <ismailov.m.h@gmail.com>
Co-authored-by: joepetrowski <joe@parity.io>
Co-authored-by: Alexandru Gheorghe <49718502+alexggh@users.noreply.github.com>
Co-authored-by: Gabriel Facco de Arruda <arrudagates@gmail.com>
Co-authored-by: Squirrel <gilescope@gmail.com>
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com>
Co-authored-by: georgepisaltu <george.pisaltu@parity.io>
Co-authored-by: command-bot <>
First in a series of PRs that reduces our use of sp-std with a view to
deprecating it.
This is just looking at /substrate and moving some of the references
from `sp-std` to `core`.
These particular changes should be uncontroversial.
Where macros are used `::core` should be used to remove any ambiguity.
part of https://github.com/paritytech/polkadot-sdk/issues/2101
I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
## Problem
The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.
It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.
**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
/// from pallet_nis
#[pallet::composite_enum]
pub enum HoldReason {
NftReceipt,
}
/// from pallet_preimage
#[pallet::composite_enum]
pub enum HoldReason {
Preimage,
}
// from pallet_state-trie-migration
#[pallet::composite_enum]
pub enum HoldReason {
SlashForContinueMigrate,
SlashForMigrateCustomTop,
SlashForMigrateCustomChild,
}
```
- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {
#[codec(index = 32u8)]
Preimage(pallet_preimage::HoldReason),
#[codec(index = 38u8)]
Nis(pallet_nis::HoldReason),
#[codec(index = 42u8)]
StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```
- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)
However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
```
// pseudo-code - if we try to call all of these:
T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;
// With `type MaxHolds = ConstU32<3>` these two will fail
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
```
## Solutions
A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.
The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {
#[pallet::composite_enum]
pub enum HoldReason {
ModuleSingleInstanceReason1,
ModuleSingleInstanceReason2,
}
...
}
#[frame_support::pallet(dev_mode)]
mod module_multi_instance {
#[pallet::composite_enum]
pub enum HoldReason<I: 'static = ()> {
ModuleMultiInstanceReason1,
ModuleMultiInstanceReason2,
ModuleMultiInstanceReason3,
}
...
}
impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
for RuntimeHoldReason
{
const VARIANT_COUNT: u32 = 0
+ module_single_instance::HoldReason::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```
In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.
## For reviewers
Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs`
- `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
- `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`
And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`
## Next steps
Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.
---------
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
This PR wraps the `Snapshot`, `SnapshotMetadata` and `DesiredTargets`
storage items in the [EPM
pallet](https://paritytech.github.io/substrate/master/pallet_election_provider_multi_phase/index.html)
in order to keep them in sync throughout the election lifetime and in
order to be killed together.
Prior to this PR, these storage items were mutated in different places
in the pallet;
In addition 2 helper `fns` are introduced for chekcing if all the
wrapped storage items exist or not;
Fixes#413 ;
---------
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
closes https://github.com/paritytech-secops/srlabs_findings/issues/78.
Removes `BetterUnsignedThreshold` from pallet EPM. This will essentially
mean any solution submitted by the validator that is strictly better
than the current queued solution would be accepted.
The reason for having these thresholds is to limit number of solutions
submitted on-chain. However for unsigned submissions, the number of
solutions that could be submitted on average is limited even without
thresholding (calculation shown in the corresponding issue).
This PR adds a round check to the `Call::submit` extrinsic to make sure
that the solution submission has been prepared for the current election
round and avoid penalties for delayed submissions.
Related to
https://github.com/paritytech-secops/srlabs_findings/issues/329
---------
Co-authored-by: command-bot <>
closes https://github.com/paritytech/polkadot-sdk/issues/1882
## Breaking Changes
This PR introduces a new item to `pallet_balances::Config`:
```diff
trait Config {
++ type RuntimeFreezeReasons;
}
```
This value is only used to check it against `type MaxFreeze`. A similar
check has been added for `MaxHolds` against `RuntimeHoldReasons`, which
is already given to `pallet_balances`.
In all contexts, you should pass the real `RuntimeFreezeReasons`
generated by `construct_runtime` to `type RuntimeFreezeReasons`. Passing
`()` would also work, but it would imply that the runtime uses no
freezes at all.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
For tools such that is using the `Miner` it's useful to know whether a
solution was trimmed or not and also how much that was trimmed.
---------
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
**Note**: This is a lift-and-shift PR from the old substrate and
polkadot repos, both PRs have been reviewed and audited
(https://github.com/paritytech/substrate/pull/13983,
https://github.com/paritytech/polkadot/pull/7140)
---
This PR implements a generic `BaseDeposit` calculation for signed
submissions, based on the size of the submission queue.
It adds a new associated type to EPM's config, `type SignedDepositBase`,
that implements `Convert<usize, BalanceOf<T>>`, which is used to
calculate the base deposit for signed submissions based on the size of
the signed submissions queue.
`struct GeometricDepositBase<Balance, Fixed, Inc>` implements the
convert trait so that the deposit value increases as a geometric
progression. The deposit base is calculated by `deposit_base =
fixed_deposit_base * (1 + increase_factor)^n`, where `n` is the term of
the progression (i.e. the number of signed submissions in the queue).
`Fixed` and `Inc` generic params are getters for `Balance` and
`IncreaseFactor` to compute the geometric progression. If
`IncreaseFactor = 0`, then the signed deposit is constant and equal to
`Fixed` regardless of the size of the queue.
### Runtime configs
In Kusama, the progression with 10% increase without changing the
current signed fixed deposit is: (term == size of the queue)
Term 1: `1,333,333,332,000`
Term 2: `1,333,333,332,000 * 1.10 = 1,466,666,665,200`
Term 3: `1,333,333,332,000 * 1.10^2 = 1,613,333,331,200`
Term 4: `1,333,333,332,000 * 1.10^3 = 1,774,666,664,320`
Term 5: `1,333,333,332,000 * 1.10^4 = 1,952,133,330,752`
Term 6: `1,333,333,332,000 * 1.10^5 = 2,147,346,663,827.20`
Term 7: `1,333,333,332,000 * 1.10^6 = 2,362,081,330,210.92`
Term 8: `1,333,333,332,000 * 1.10^7 = 2,598,289,463,231.01`
Term 9: `1,333,333,332,000 * 1.10^8 = 2,858,118,409,554.11`
Term 10: `1,333,333,332,000 * 1.10^9 = 3,143,930,250,509.52`
Westend:
Term 1: `2,000,000,000,000`
Term 2: `2,000,000,000,000 * 1.10 = 2,200,000,000,000`
Term 3: `2,000,000,000,000 * 1.10^2 = 2,420,000,000,000`
Term 4: `2,000,000,000,000 * 1.10^3 = 2,662,000,000,000`
Term 5: `2,000,000,000,000 * 1.10^4 = 2,928,200,000,000`
Term 6: `2,000,000,000,000 * 1.10^5 = 3,221,020,000,000`
Term 7: `2,000,000,000,000 * 1.10^6 = 3,543,122,000,000`
Term 8: `2,000,000,000,000 * 1.10^7 = 3,897,434,200,000`
Term 9: `2,000,000,000,000 * 1.10^8 = 4,287,177,620,000`
Term 10: `2,000,000,000,000 * 1.10^9 = 4,715,895,382,000`
and in Polkadot, the deposit increase is disabled in the current state
of the PR, as the increase factor is 0% -- so nothing changes from the
current behaviour.
Closes https://github.com/paritytech-secops/srlabs_findings/issues/189
* Implements dynamic nominations per nominator
* Adds SnapshotBounds and ElectionSizeTracker
* Changes the ElectionDataProvider interface to receive ElectionBounds as input
* Implements get_npos_voters with ElectionBounds
* Implements get_npos_targets with ElectionBounds
* Adds comments
* tests
* Truncates nomninations that exceed nominations quota; Old tests passing
* Uses DataProviderBounds and ElectionBounds (to continue)
* Finishes conversions - tests passing
* Refactor staking in babe mocks
* Replaces MaxElectableTargets and MaxElectingVoters with ElectionBounds; Adds more tests
* Fixes nits; node compiling
* bechmarks
* removes nomination_quota extrinsic to request the nomination quota
* Lazy quota check, ie. at nominate time only
* remove non-working test (for now)
* tests lazy nominations quota when quota is lower than current number of nominated targets
* Adds runtime API and custom RPC call for clients to query the nominations quota for a given balance
* removes old rpc
* Cosmetic touches
* All mocks working
* Fixes benchmarking mocks
* nits
* more tests
* renames trait methods
* nit
* ".git/.scripts/commands/fmt/fmt.sh"
* Fix V2 PoV benchmarking (#13485)
* Bump default 'additional_trie_layers' to two
The default here only works for extremely small runtimes, which have
no more than 16 storage prefices. This is changed to a "sane" default
of 2, which is save for runtimes with up to 4096 storage prefices (eg StorageValue).
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update tests and test weights
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix PoV weights
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_balances
* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_message_queue
* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_glutton
* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_glutton
* Fix sanity check
>0 would also do as a check, but let's try this.
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: command-bot <>
* Move BEEFY code to consensus (#13484)
* Move beefy primitives to consensus dir
* Move beefy gadget to client consensus folder
* Rename beefy crates
* chore: move genesis block builder to chain-spec crate. (#13427)
* chore: move genesis block builder to block builder crate.
* add missing file
* chore: move genesis block builder to sc-chain-spec
* Update client/chain-spec/src/genesis.rs
Co-authored-by: Bastian Köcher <git@kchr.de>
* Update test-utils/runtime/src/genesismap.rs
Co-authored-by: Bastian Köcher <git@kchr.de>
* Update test-utils/runtime/client/src/lib.rs
* fix warnings
* fix warnings
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
* Speed up storage iteration from within the runtime (#13479)
* Speed up storage iteration from within the runtime
* Move the cached iterator into an `Option`
* Use `RefCell` in no_std
* Simplify the code slightly
* Use `Option::replace`
* Update doc comment for `next_storage_key_slow`
* Make unbounded channels size warning exact (part 1) (#13490)
* Replace `futures-channel` with `async-channel` in `out_events`
* Apply suggestions from code review
Co-authored-by: Koute <koute@users.noreply.github.com>
* Also print the backtrace of `send()` call
* Switch from `backtrace` crate to `std::backtrace`
* Remove outdated `backtrace` dependency
* Remove `backtrace` from `Cargo.lock`
---------
Co-authored-by: Koute <koute@users.noreply.github.com>
* Removal of Prometheus alerting rules deployment in cloud-infra (#13499)
* sp-consensus: remove unused error variants (#13495)
* Expose `ChargedAmount` (#13488)
* Expose `ChargedAmount`
* Fix imports
* sc-consensus-beefy: fix metrics: use correct names (#13494)
Signed-off-by: acatangiu <adrian@parity.io>
* clippy fix
* removes NominationsQuotaExceeded event
* Update frame/staking/src/lib.rs
Co-authored-by: Ross Bulat <ross@parity.io>
* adds back the npos_max_iter
* remove duplicate imports added after merge
* fmt
* Adds comment in public struct; Refactors CountBound and SizeCount to struct
* addresses various pr comments
* PR comment reviews
* Fixes on-chain election bounds and related code
* EPM checks the size of the voter list returned by the data provider
* cosmetic changes
* updates e2e tests mock
* Adds more tests for size tracker and refactors code
* Adds back only_iterates_max_2_times_max_allowed_len test
* Refactor
* removes unecessary dependency
* empty commit -- restart all stuck CI jobs
* restarts ci jobs
* Renames ElectionBounds -> Bounds in benchmarking mocks et al
* updates mocks
* Update frame/election-provider-support/src/lib.rs
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
* Update frame/staking/src/pallet/impls.rs
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
* Update frame/election-provider-support/src/lib.rs
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
* Update frame/staking/src/tests.rs
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
* more checks in api_nominations_quota in tests
* Improves docs
* fixes e2e tests
* Uses size_hint rather than mem::size_of in size tracker; Refactor size tracker to own module
* nits from reviews
* Refactors bounds to own module; improves docs
* More tests and docs
* fixes docs
* Fixes benchmarks
* Fixes rust docs
* fixes bags-list remote-ext-tests
* Simplify bound checks in create_snapshot_external
* Adds target size check in get_npos_targets
* ".git/.scripts/commands/fmt/fmt.sh"
* restart ci
* rust doc fixes and cosmetic nits
* rollback upgrade on parity-scale-codec version (unecessary)
* reset cargo lock, no need to update it
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Signed-off-by: acatangiu <adrian@parity.io>
Co-authored-by: command-bot <>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: yjh <yjh465402634@gmail.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Koute <koute@users.noreply.github.com>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Anthony Lazam <lazam@users.noreply.github.com>
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
Co-authored-by: Piotr Mikołajczyk <piomiko41@gmail.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: Ross Bulat <ross@parity.io>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* replace Index by Nonce
* wip
* remove index in lieu of nonce
* wip
* remove accountnonce in lieu of nonce
* add minor improvement
* rebase and merge conflicts
* HoldReason: Improve usage
`HoldReason` was switched recently to use the `composite_enum` attribute that will merge the enums
from all pallets in the runtime to `RuntimeHoldReason`. `pallet-nis` was still requiring that the
variant was passed as constant to call `hold`. The proper implementation is to use the `HoldReason`
from inside the pallet directly when calling `hold`. This is done by adding a `RuntimeHoldReason` as
type to the `Config` trait and requiring that `Currency` is using the same reason. Besides that the
pr changes the name `HoldIdentifier` in `pallet_balances::Config` to `RuntimeHoldReason`.
* Update frame/nis/src/lib.rs
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Review comment
* Fixes
---------
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* frame epm: expose feasibity_check in miner
The goal with this commit is to expose the `feasibity_check` such
that anyone that implements the `MinerConfig trait` can utilize it
* cleanup
* fix tests
* Change copyright year to 2023 from 2022
* Fix incorrect update of copyright year
* Remove years from copy right header
* Fix remaining files
* Fix typo in a header and remove update-copyright.sh
* initial impl
* add template test
* linear fit proof size
* always record proof when tracking storage
* calculate worst case pov
* remove duplicate worst case
* cargo run --quiet --profile=production --features=runtime-benchmarks --manifest-path=bin/node/cli/Cargo.toml -- benchmark pallet --chain=dev --steps=50 --repeat=20 --pallet=pallet_assets --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --output=./frame/assets/src/weights.rs --template=./.maintain/frame-weight-template.hbs
* more comment output
* add cli for worst case map size
* update name
* clap does not support underscores
* rename
* expose worst case map values
* improve some comments
* cargo run --quiet --profile=production --features=runtime-benchmarks --manifest-path=bin/node/cli/Cargo.toml -- benchmark pallet --chain=dev --steps=50 --repeat=20 --pallet=pallet_assets --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --output=./frame/assets/src/weights.rs --template=./.maintain/frame-weight-template.hbs
* update template
* cargo run --quiet --profile=production --features=runtime-benchmarks --manifest-path=bin/node/cli/Cargo.toml -- benchmark pallet --chain=dev --steps=50 --repeat=20 --pallet=pallet_assets --extrinsic=* --execution=wasm --wasm-execution=compiled --heap-pages=4096 --output=./frame/assets/src/weights.rs --template=./.maintain/frame-weight-template.hbs
* fix fmt
* more fmt
* more fmt
* Dont panic when there is no proof
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix test features
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Whitelist :extrinsic_index
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Use whitelist when recording proof
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add logs
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add PoV testing pallet
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Deploy PoV testing pallet
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Storage benches reside in the PoV pallet
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Linear regress PoV per component
Splits the PoV calculation into "measured" and "estimated".
The measured part is reported by the Proof recorder and linear
regressed over all components at once.
The estimated part is calculated as worst-case by using the max
PoV size per storage access and calculating one linear regress per
component. This gives each component a (possibly) independent PoV.
For now the measured size will always be lower than the PoV on
Polkadot since it is measured on an empty snapshot. The measured
part is therefor only used as diagnostic for debugging.
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Put PoV into the weight templates
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* fmt
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Extra alanysis choise for PoV
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add+Fix tests
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Make benches faster
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Cleanup
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Use same template comments
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* ".git/.scripts/bench-bot.sh" pallet dev pallet_balances
* ".git/.scripts/bench-bot.sh" pallet dev pallet_democracy
* Update referenda mock BlockWeights
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Take measured value size into account
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* clippy
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* ".git/.scripts/bench-bot.sh" pallet dev pallet_scheduler
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* proof_size: None
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* ugly, but works
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* wup
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* WIP
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add pov_mode attribute to the benchmarks! macro
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Use pov_mode attribute in PoV benchmarking
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update tests
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Scheduler, Whitelist: Add pov_mode attr
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update PoV weights
* Add CLI arg: default-pov-mode
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix tests
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* fmt
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* fix
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert "Update PoV weights"
This reverts commit 2f3ac2387396470b118122a6ff8fa4ee12216f4b.
* Revert "WIP"
This reverts commit c34b538cd2bc45da4544e887180184e30957904a.
* Revert first approach
This reverts commit range 8ddaa2fffe5930f225a30bee314d0b7c94c344dd^..4c84f8748e5395852a9e0e25b0404953fee1a59e
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Clippy
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add extra benchmarks
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_alliance
* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_whitelist
* ".git/.scripts/commands/bench/bench.sh" pallet dev pallet_scheduler
* fmt
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Clippy
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Clippy 🤦
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add reference benchmarks
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix doc comments
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Undo logging
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Add 'Ignored' pov_mode
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Allow multiple attributes per benchmark
Turns out that the current benchmarking syntax does not support
multiple attributes per bench 🤦. Changing it to support that
since otherwise the `pov_mode` would conflict with the others.
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Validate pov_mode syntax
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Ignore PoV for all contract benchmarks
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Test
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* test
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Bump macro recursion limit
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* fmt
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update contract weights
They dont have a PoV component anymore.
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* fix test ffs
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* pov_mode is unsupported in V2 syntax
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix pallet ui tests
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* update pallet ui
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Fix pallet ui tests
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Update weights
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Parity Bot <admin@parity.io>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: command-bot <>
Co-authored-by: Your Name <you@example.com>
* frame-system: explicit call index
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Use explicit call indices
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* pallet-template: explicit call index
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* DNM: Temporarily require call_index
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* Revert "DNM: Temporarily require call_index"
This reverts commit c4934e312e12af72ca05a8029d7da753a9c99346.
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
* bounding election provider with kian
* multi phase implement bounded election provider
* election provider blanket implementation
* staking compiles
* fix test for election provider support
* fmt
* fixing epmp tests, does not compile yet
* fix epmp tests
* fix staking tests
* fmt
* fix runtime tests
* fmt
* remove outdated wip tags
* add enum error
* sort and truncate supports
* comment
* error when unsupported number of election winners
* compiling wip after kian's suggestions
* fix TODOs
* remove,fix tags
* ensure validator count does not exceed maxwinners
* clean up
* some more clean up and todos
* handle too many winners
* rename parameter for mock
* todo
* add sort and truncate rule if there are too many winners
* fmt
* fail, not swallow emergency result bound not met
* remove too many winners resolution as it can be guaranteed to be bounded
* fix benchmark
* give MaxWinners more contextual name
* make ready solution generic over T
* kian feedback
* fix stuff
* Kian's way of solvign this
* comment fix
* fix compile
* remove use of BoundedExecution
* fmt
* comment out failing integrity test
* cap validator count increment to max winners
* dont panic
* add test for bad data provider
* Update frame/staking/src/pallet/impls.rs
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
* fix namespace conflict and add test for onchain max winners less than desired targets
* defensive unwrap
* early convert to bounded vec
* fix syntax
* fmt
* fix doc
* fix rustdoc
* fmt
* fix maxwinner count for benchmarking
* add instant election for noelection
* fmt
* fix compile
* pr feedbacks
* always error at validator count exceeding max winners
* add useful error message
* pr comments
* import fix
* add checked_desired_targets
* fmt
* fmt
* fix rust doc
Co-authored-by: parity-processbot <>
Co-authored-by: kianenigma <kian@parity.io>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>