Part of https://github.com/paritytech/polkadot-sdk/issues/226
Related https://github.com/paritytech/polkadot-sdk/issues/1833
- Deprecate `CurrencyAdapter` and introduce `FungibleAdapter`
- Deprecate `ToStakingPot` and replace usage with `ResolveTo`
- Required creating a new `StakingPotAccountId` struct that implements
`TypedGet` for the staking pot account ID
- Update parachain common utils `DealWithFees`, `ToAuthor` and
`AssetsToBlockAuthor` implementations to use `fungible`
- Update runtime XCM Weight Traders to use `ResolveTo` instead of
`ToStakingPot`
- Update runtime Transaction Payment pallets to use `FungibleAdapter`
instead of `CurrencyAdapter`
- [x] Blocked by https://github.com/paritytech/polkadot-sdk/pull/1296,
needs the `Unbalanced::decrease_balance` fix
This PR includes the following 2 improvements:
## Ethereum Client
Author: @yrong
### Original Upstream PRs
- https://github.com/Snowfork/polkadot-sdk/pull/123
- https://github.com/Snowfork/polkadot-sdk/pull/125
### Description
The Ethereum client syncs beacon headers as they are finalized, and
imports every execution header. When a message is received, it is
verified against the import execution header. This is unnecessary, since
the execution header can be sent with the message as proof. The recent
Deneb Ethereum upgrade made it easier to locate the relevant beacon
header from an execution header, and so this improvement was made
possible. This resolves a concern @svyatonik had in our initial Rococo
PR:
https://github.com/paritytech/polkadot-sdk/pull/2522#discussion_r1431270691
## Inbound Queue
Author: @yrong
### Original Upstream PR
- https://github.com/Snowfork/polkadot-sdk/pull/118
### Description
When the AH sovereign account (who pays relayer rewards) is depleted,
the inbound message will not fail. The relayer just will not receive
rewards.
Both these changes were done by @yrong, many thanks. ❤️
---------
Co-authored-by: claravanstaden <Cats 4 life!>
Co-authored-by: Ron <yrong1997@gmail.com>
Co-authored-by: Vincent Geddes <vincent@snowfork.com>
Co-authored-by: Svyatoslav Nikolsky <svyatonik@gmail.com>
Working towards migrating the `parity-bridges-common` repo inside
`polkadot-sdk`. This PR upgrades some dependencies in order to align
them with the versions used in `parity-bridges-common`
Related to
https://github.com/paritytech/parity-bridges-common/issues/2538
Related to
https://github.com/paritytech/parity-bridges-common/issues/2538
This PR doesn't contain any functional changes.
The PR moves specific bridged chain definitions from
`bridges/primitives` to `bridges/chains` folder in order to facilitate
the migration of the `parity-bridges-repo` into `polkadot-sdk` as
discussed in https://hackmd.io/LprWjZ0bQXKpFeveYHIRXw?view
Apart from this it also includes some cosmetic changes to some
`Cargo.toml` files as a result of running `diener workspacify`.
Bridging fees are calculated using a static ETH/DOT exchange rate that
can deviate significantly from the real-world exchange rate. We
therefore need to add a safety margin to the fee so that users almost
aways cover the cost of relaying.
# FAQ
> Why introduce a `multiplier` parameter instead of configuring an
exchange rate which already has a safety factor applied?
When converting from ETH to DOT, we need to _divide_ the multiplier by
the exchange rate, and to convert from DOT to ETH we need to _multiply_
the multiplier by the exchange rate.
> Other input parameters to the fee calculation can also deviate from
real-world values. These include substrate weights, gas prices, and so
on. Why does the multiplier introduced here not adjust those?
A single scalar multiplier won't be able to accommodate the different
volatilities efficiently. For example, gas prices are much more volatile
than exchange rates, and substrate weights hardly ever change.
So the pricing config relating to weights and gas prices should already
have some appropriate safety margin pre-applied.
# Detailed Changes:
* Added `multiplier` field to `PricingParameters`
* Outbound-queue fee is multiplied by `multiplier`
* This `multiplier` is synced to the Ethereum side
* Improved Runtime API for calculating outbound-queue fees. This API
makes it much easier to for configure parts of the system in preparation
for launch.
* Improve and clarify code documentation
Upstreamed from https://github.com/Snowfork/polkadot-sdk/pull/127
---------
Co-authored-by: Clara van Staden <claravanstaden64@gmail.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Introduces `CryptoBytes` type defined as:
```rust
pub struct CryptoBytes<const N: usize, Tag = ()>(pub [u8; N], PhantomData<fn() -> Tag>);
```
The type implements a bunch of methods and traits which are typically
expected from a byte array newtype
(NOTE: some of the methods and trait implementations IMO are a bit
redundant, but I decided to maintain them all to not change too much
stuff in this PR)
It also introduces two (generic) typical consumers of `CryptoBytes`:
`PublicBytes` and `SignatureBytes`.
```rust
pub struct PublicTag;
pub PublicBytes<const N: usize, CryptoTag> = CryptoBytes<N, (PublicTag, CryptoTag)>;
pub struct SignatureTag;
pub SignatureBytes<const N: usize, CryptoTag> = CryptoBytes<N, (SignatureTag, CryptoTag)>;
```
Both of them use a tag to differentiate the two types at a higher level.
Downstream specializations will further specialize using a dedicated
crypto tag. For example in ECDSA:
```rust
pub struct EcdsaTag;
pub type Public = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>;
pub type Signature = PublicBytes<PUBLIC_KEY_SERIALIZED_SIZE, EcdsaTag>;
```
Overall we have a cleaner and most importantly **consistent** code for
all the types involved
All these details are opaque to the end user which can use `Public` and
`Signature` for the cryptos as before
Currently the xcm-executor returns an `Unimplemented` error if it
receives any HRMP-related instruction.
What I propose here, which is what we are currently doing in our forked
executor at polimec, is to introduce a trait implemented by the executor
which will handle those instructions.
This way, if parachains want to keep the default behavior, they just use
`()` and it will return unimplemented, but they can also implement their
own logic to establish HRMP channels with other chains in an automated
fashion, without requiring to go through governance.
Our implementation is mentioned in the [polkadot HRMP
docs](https://arc.net/l/quote/hduiivbu), and it was suggested to us to
submit a PR to add these changes to polkadot-sdk.
---------
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: command-bot <>
Removed the `pallet::getter` macro call from storage type definitions
and added the corresponding implementations directly.
fixes#3330
polkadot address: 14JzTPPUd8x8phKi8qLxHgNTnTMg6DUukCLXoWprejkaHXPz
---------
Co-authored-by: Bastian Köcher <git@kchr.de>
Closes#2160
First part of [Extrinsic
Horizon](https://github.com/paritytech/polkadot-sdk/issues/2415)
Introduces a new trait `TransactionExtension` to replace
`SignedExtension`. Introduce the idea of transactions which obey the
runtime's extensions and have according Extension data (né Extra data)
yet do not have hard-coded signatures.
Deprecate the terminology of "Unsigned" when used for
transactions/extrinsics owing to there now being "proper" unsigned
transactions which obey the extension framework and "old-style" unsigned
which do not. Instead we have __*General*__ for the former and
__*Bare*__ for the latter. (Ultimately, the latter will be phased out as
a type of transaction, and Bare will only be used for Inherents.)
Types of extrinsic are now therefore:
- Bare (no hardcoded signature, no Extra data; used to be known as
"Unsigned")
- Bare transactions (deprecated): Gossiped, validated with
`ValidateUnsigned` (deprecated) and the `_bare_compat` bits of
`TransactionExtension` (deprecated).
- Inherents: Not gossiped, validated with `ProvideInherent`.
- Extended (Extra data): Gossiped, validated via `TransactionExtension`.
- Signed transactions (with a hardcoded signature).
- General transactions (without a hardcoded signature).
`TransactionExtension` differs from `SignedExtension` because:
- A signature on the underlying transaction may validly not be present.
- It may alter the origin during validation.
- `pre_dispatch` is renamed to `prepare` and need not contain the checks
present in `validate`.
- `validate` and `prepare` is passed an `Origin` rather than a
`AccountId`.
- `validate` may pass arbitrary information into `prepare` via a new
user-specifiable type `Val`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`. It is encoded *for the entire transaction* and
passed in to each extension as a new argument to `validate`. This
facilitates the ability of extensions to acts as underlying crypto.
There is a new `DispatchTransaction` trait which contains only default
function impls and is impl'ed for any `TransactionExtension` impler. It
provides several utility functions which reduce some of the tedium from
using `TransactionExtension` (indeed, none of its regular functions
should now need to be called directly).
Three transaction version discriminator ("versions") are now
permissible:
- 0b000000100: Bare (used to be called "Unsigned"): contains Signature
or Extra (extension data). After bare transactions are no longer
supported, this will strictly identify an Inherents only.
- 0b100000100: Old-school "Signed" Transaction: contains Signature and
Extra (extension data).
- 0b010000100: New-school "General" Transaction: contains Extra
(extension data), but no Signature.
For the New-school General Transaction, it becomes trivial for authors
to publish extensions to the mechanism for authorizing an Origin, e.g.
through new kinds of key-signing schemes, ZK proofs, pallet state,
mutations over pre-authenticated origins or any combination of the
above.
## Code Migration
### NOW: Getting it to build
Wrap your `SignedExtension`s in `AsTransactionExtension`. This should be
accompanied by renaming your aggregate type in line with the new
terminology. E.g. Before:
```rust
/// The SignedExtension to the basic transaction logic.
pub type SignedExtra = (
/* snip */
MySpecialSignedExtension,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, SignedExtra>;
```
After:
```rust
/// The extension to the basic transaction logic.
pub type TxExtension = (
/* snip */
AsTransactionExtension<MySpecialSignedExtension>,
);
/// Unchecked extrinsic type as expected by this runtime.
pub type UncheckedExtrinsic =
generic::UncheckedExtrinsic<Address, RuntimeCall, Signature, TxExtension>;
```
You'll also need to alter any transaction building logic to add a
`.into()` to make the conversion happen. E.g. Before:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let extra: SignedExtra = (
/* snip */
MySpecialSignedExtension::new(/* snip */),
);
let payload = SignedPayload::new(call.clone(), extra.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
extra,
)
}
```
After:
```rust
fn construct_extrinsic(
/* snip */
) -> UncheckedExtrinsic {
let tx_ext: TxExtension = (
/* snip */
MySpecialSignedExtension::new(/* snip */).into(),
);
let payload = SignedPayload::new(call.clone(), tx_ext.clone()).unwrap();
let signature = payload.using_encoded(|e| sender.sign(e));
UncheckedExtrinsic::new_signed(
/* snip */
Signature::Sr25519(signature),
tx_ext,
)
}
```
### SOON: Migrating to `TransactionExtension`
Most `SignedExtension`s can be trivially converted to become a
`TransactionExtension`. There are a few things to know.
- Instead of a single trait like `SignedExtension`, you should now
implement two traits individually: `TransactionExtensionBase` and
`TransactionExtension`.
- Weights are now a thing and must be provided via the new function `fn
weight`.
#### `TransactionExtensionBase`
This trait takes care of anything which is not dependent on types
specific to your runtime, most notably `Call`.
- `AdditionalSigned`/`additional_signed` is renamed to
`Implicit`/`implicit`.
- Weight must be returned by implementing the `weight` function. If your
extension is associated with a pallet, you'll probably want to do this
via the pallet's existing benchmarking infrastructure.
#### `TransactionExtension`
Generally:
- `pre_dispatch` is now `prepare` and you *should not reexecute the
`validate` functionality in there*!
- You don't get an account ID any more; you get an origin instead. If
you need to presume an account ID, then you can use the trait function
`AsSystemOriginSigner::as_system_origin_signer`.
- You get an additional ticket, similar to `Pre`, called `Val`. This
defines data which is passed from `validate` into `prepare`. This is
important since you should not be duplicating logic from `validate` to
`prepare`, you need a way of passing your working from the former into
the latter. This is it.
- This trait takes two type parameters: `Call` and `Context`. `Call` is
the runtime call type which used to be an associated type; you can just
move it to become a type parameter for your trait impl. `Context` is not
currently used and you can safely implement over it as an unbounded
type.
- There's no `AccountId` associated type any more. Just remove it.
Regarding `validate`:
- You get three new parameters in `validate`; all can be ignored when
migrating from `SignedExtension`.
- `validate` returns a tuple on success; the second item in the tuple is
the new ticket type `Self::Val` which gets passed in to `prepare`. If
you use any information extracted during `validate` (off-chain and
on-chain, non-mutating) in `prepare` (on-chain, mutating) then you can
pass it through with this. For the tuple's last item, just return the
`origin` argument.
Regarding `prepare`:
- This is renamed from `pre_dispatch`, but there is one change:
- FUNCTIONALITY TO VALIDATE THE TRANSACTION NEED NOT BE DUPLICATED FROM
`validate`!!
- (This is different to `SignedExtension` which was required to run the
same checks in `pre_dispatch` as in `validate`.)
Regarding `post_dispatch`:
- Since there are no unsigned transactions handled by
`TransactionExtension`, `Pre` is always defined, so the first parameter
is `Self::Pre` rather than `Option<Self::Pre>`.
If you make use of `SignedExtension::validate_unsigned` or
`SignedExtension::pre_dispatch_unsigned`, then:
- Just use the regular versions of these functions instead.
- Have your logic execute in the case that the `origin` is `None`.
- Ensure your transaction creation logic creates a General Transaction
rather than a Bare Transaction; this means having to include all
`TransactionExtension`s' data.
- `ValidateUnsigned` can still be used (for now) if you need to be able
to construct transactions which contain none of the extension data,
however these will be phased out in stage 2 of the Transactions Horizon,
so you should consider moving to an extension-centric design.
## TODO
- [x] Introduce `CheckSignature` impl of `TransactionExtension` to
ensure it's possible to have crypto be done wholly in a
`TransactionExtension`.
- [x] Deprecate `SignedExtension` and move all uses in codebase to
`TransactionExtension`.
- [x] `ChargeTransactionPayment`
- [x] `DummyExtension`
- [x] `ChargeAssetTxPayment` (asset-tx-payment)
- [x] `ChargeAssetTxPayment` (asset-conversion-tx-payment)
- [x] `CheckWeight`
- [x] `CheckTxVersion`
- [x] `CheckSpecVersion`
- [x] `CheckNonce`
- [x] `CheckNonZeroSender`
- [x] `CheckMortality`
- [x] `CheckGenesis`
- [x] `CheckOnlySudoAccount`
- [x] `WatchDummy`
- [x] `PrevalidateAttests`
- [x] `GenericSignedExtension`
- [x] `SignedExtension` (chain-polkadot-bulletin)
- [x] `RefundSignedExtensionAdapter`
- [x] Implement `fn weight` across the board.
- [ ] Go through all pre-existing extensions which assume an account
signer and explicitly handle the possibility of another kind of origin.
- [x] `CheckNonce` should probably succeed in the case of a non-account
origin.
- [x] `CheckNonZeroSender` should succeed in the case of a non-account
origin.
- [x] `ChargeTransactionPayment` and family should fail in the case of a
non-account origin.
- [ ]
- [x] Fix any broken tests.
---------
Signed-off-by: georgepisaltu <george.pisaltu@parity.io>
Signed-off-by: Alexandru Vasile <alexandru.vasile@parity.io>
Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Signed-off-by: Alexandru Gheorghe <alexandru.gheorghe@parity.io>
Signed-off-by: Andrei Sandu <andrei-mihail@parity.io>
Co-authored-by: Nikhil Gupta <17176722+gupnik@users.noreply.github.com>
Co-authored-by: georgepisaltu <52418509+georgepisaltu@users.noreply.github.com>
Co-authored-by: Chevdor <chevdor@users.noreply.github.com>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Maciej <maciej.zyszkiewicz@parity.io>
Co-authored-by: Javier Viola <javier@parity.io>
Co-authored-by: Marcin S. <marcin@realemail.net>
Co-authored-by: Tsvetomir Dimitrov <tsvetomir@parity.io>
Co-authored-by: Javier Bullrich <javier@bullrich.dev>
Co-authored-by: Koute <koute@users.noreply.github.com>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
Co-authored-by: Vladimir Istyufeev <vladimir@parity.io>
Co-authored-by: Ross Bulat <ross@parity.io>
Co-authored-by: Gonçalo Pestana <g6pestana@gmail.com>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Svyatoslav Nikolsky <svyatonik@gmail.com>
Co-authored-by: André Silva <123550+andresilva@users.noreply.github.com>
Co-authored-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: s0me0ne-unkn0wn <48632512+s0me0ne-unkn0wn@users.noreply.github.com>
Co-authored-by: ordian <write@reusable.software>
Co-authored-by: Sebastian Kunert <skunert49@gmail.com>
Co-authored-by: Aaro Altonen <48052676+altonen@users.noreply.github.com>
Co-authored-by: Dmitry Markin <dmitry@markin.tech>
Co-authored-by: Alexandru Vasile <60601340+lexnv@users.noreply.github.com>
Co-authored-by: Alexander Samusev <41779041+alvicsam@users.noreply.github.com>
Co-authored-by: Julian Eager <eagr@tutanota.com>
Co-authored-by: Michal Kucharczyk <1728078+michalkucharczyk@users.noreply.github.com>
Co-authored-by: Davide Galassi <davxy@datawok.net>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: yjh <yjh465402634@gmail.com>
Co-authored-by: Tom Mi <tommi@niemi.lol>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Will | Paradox | ParaNodes.io <79228812+paradox-tt@users.noreply.github.com>
Co-authored-by: Bastian Köcher <info@kchr.de>
Co-authored-by: Joshy Orndorff <JoshOrndorff@users.noreply.github.com>
Co-authored-by: Joshy Orndorff <git-user-email.h0ly5@simplelogin.com>
Co-authored-by: PG Herveou <pgherveou@gmail.com>
Co-authored-by: Alexander Theißen <alex.theissen@me.com>
Co-authored-by: Kian Paimani <5588131+kianenigma@users.noreply.github.com>
Co-authored-by: Juan Girini <juangirini@gmail.com>
Co-authored-by: bader y <ibnbassem@gmail.com>
Co-authored-by: James Wilson <james@jsdw.me>
Co-authored-by: joe petrowski <25483142+joepetrowski@users.noreply.github.com>
Co-authored-by: asynchronous rob <rphmeier@gmail.com>
Co-authored-by: Parth <desaiparth08@gmail.com>
Co-authored-by: Andrew Jones <ascjones@gmail.com>
Co-authored-by: Jonathan Udd <jonathan@dwellir.com>
Co-authored-by: Serban Iorga <serban@parity.io>
Co-authored-by: Egor_P <egor@parity.io>
Co-authored-by: Branislav Kontur <bkontur@gmail.com>
Co-authored-by: Evgeny Snitko <evgeny@parity.io>
Co-authored-by: Just van Stam <vstam1@users.noreply.github.com>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
Co-authored-by: dzmitry-lahoda <dzmitry@lahoda.pro>
Co-authored-by: zhiqiangxu <652732310@qq.com>
Co-authored-by: Nazar Mokrynskyi <nazar@mokrynskyi.com>
Co-authored-by: Anwesh <anweshknayak@gmail.com>
Co-authored-by: cheme <emericchevalier.pro@gmail.com>
Co-authored-by: Sam Johnson <sam@durosoft.com>
Co-authored-by: kianenigma <kian@parity.io>
Co-authored-by: Jegor Sidorenko <5252494+jsidorenko@users.noreply.github.com>
Co-authored-by: Muharem <ismailov.m.h@gmail.com>
Co-authored-by: joepetrowski <joe@parity.io>
Co-authored-by: Alexandru Gheorghe <49718502+alexggh@users.noreply.github.com>
Co-authored-by: Gabriel Facco de Arruda <arrudagates@gmail.com>
Co-authored-by: Squirrel <gilescope@gmail.com>
Co-authored-by: Andrei Sandu <54316454+sandreim@users.noreply.github.com>
Co-authored-by: georgepisaltu <george.pisaltu@parity.io>
Co-authored-by: command-bot <>
If an XCM execution fails or ends with leftover assets, these will be
trapped.
In order to claim them, a custom XCM has to be executed, with the
`ClaimAsset` instruction.
However, arbitrary XCM execution is not allowed everywhere yet and XCM
itself is still not easy enough to use for users out there with trapped
assets.
This new extrinsic in `pallet-xcm` will allow these users to easily
claim their assets, without concerning themselves with writing arbitrary
XCMs.
Part of fixing https://github.com/paritytech/polkadot-sdk/issues/3495
---------
Co-authored-by: command-bot <>
Co-authored-by: Adrian Catangiu <adrian@parity.io>
This MR is the merge of
https://github.com/paritytech/substrate/pull/14414 and
https://github.com/paritytech/substrate/pull/14275. It implements
[RFC#13](https://github.com/polkadot-fellows/RFCs/pull/13), closes
https://github.com/paritytech/polkadot-sdk/issues/198.
-----
This Merge request introduces three major topicals:
1. Multi-Block-Migrations
1. New pallet `poll` hook for periodic service work
1. Replacement hooks for `on_initialize` and `on_finalize` in cases
where `poll` cannot be used
and some more general changes to FRAME.
The changes for each topical span over multiple crates. They are listed
in topical order below.
# 1.) Multi-Block-Migrations
Multi-Block-Migrations are facilitated by creating `pallet_migrations`
and configuring `System::Config::MultiBlockMigrator` to point to it.
Executive picks this up and triggers one step of the migrations pallet
per block.
The chain is in lockdown mode for as long as an MBM is ongoing.
Executive does this by polling `MultiBlockMigrator::ongoing` and not
allowing any transaction in a block, if true.
A MBM is defined through trait `SteppedMigration`. A condensed version
looks like this:
```rust
/// A migration that can proceed in multiple steps.
pub trait SteppedMigration {
type Cursor: FullCodec + MaxEncodedLen;
type Identifier: FullCodec + MaxEncodedLen;
fn id() -> Self::Identifier;
fn max_steps() -> Option<u32>;
fn step(
cursor: Option<Self::Cursor>,
meter: &mut WeightMeter,
) -> Result<Option<Self::Cursor>, SteppedMigrationError>;
}
```
`pallet_migrations` can be configured with an aggregated tuple of these
migrations. It then starts to migrate them one-by-one on the next
runtime upgrade.
Two things are important here:
- 1. Doing another runtime upgrade while MBMs are ongoing is not a good
idea and can lead to messed up state.
- 2. **Pallet Migrations MUST BE CONFIGURED IN `System::Config`,
otherwise it is not used.**
The pallet supports an `UpgradeStatusHandler` that can be used to notify
external logic of upgrade start/finish (for example to pause XCM
dispatch).
Error recovery is very limited in the case that a migration errors or
times out (exceeds its `max_steps`). Currently the runtime dev can
decide in `FailedMigrationHandler::failed` how to handle this. One
follow-up would be to pair this with the `SafeMode` pallet and enact
safe mode when an upgrade fails, to allow governance to rescue the
chain. This is currently not possible, since governance is not
`Mandatory`.
## Runtime API
- `Core`: `initialize_block` now returns `ExtrinsicInclusionMode` to
inform the Block Author whether they can push transactions.
### Integration
Add it to your runtime implementation of `Core` and `BlockBuilder`:
```patch
diff --git a/runtime/src/lib.rs b/runtime/src/lib.rs
@@ impl_runtime_apis! {
impl sp_block_builder::Core<Block> for Runtime {
- fn initialize_block(header: &<Block as BlockT>::Header) {
+ fn initialize_block(header: &<Block as BlockT>::Header) -> RuntimeExecutiveMode {
Executive::initialize_block(header)
}
...
}
```
# 2.) `poll` hook
A new pallet hook is introduced: `poll`. `Poll` is intended to replace
mostly all usage of `on_initialize`.
The reason for this is that any code that can be called from
`on_initialize` cannot be migrated through an MBM. Currently there is no
way to statically check this; the implication is to use `on_initialize`
as rarely as possible.
Failing to do so can result in broken storage invariants.
The implementation of the poll hook depends on the `Runtime API` changes
that are explained above.
# 3.) Hard-Deadline callbacks
Three new callbacks are introduced and configured on `System::Config`:
`PreInherents`, `PostInherents` and `PostTransactions`.
These hooks are meant as replacement for `on_initialize` and
`on_finalize` in cases where the code that runs cannot be moved to
`poll`.
The reason for this is to make the usage of HD-code (hard deadline) more
explicit - again to prevent broken invariants by MBMs.
# 4.) FRAME (general changes)
## `frame_system` pallet
A new memorize storage item `InherentsApplied` is added. It is used by
executive to track whether inherents have already been applied.
Executive and can then execute the MBMs directly between inherents and
transactions.
The `Config` gets five new items:
- `SingleBlockMigrations` this is the new way of configuring migrations
that run in a single block. Previously they were defined as last generic
argument of `Executive`. This shift is brings all central configuration
about migrations closer into view of the developer (migrations that are
configured in `Executive` will still work for now but is deprecated).
- `MultiBlockMigrator` this can be configured to an engine that drives
MBMs. One example would be the `pallet_migrations`. Note that this is
only the engine; the exact MBMs are injected into the engine.
- `PreInherents` a callback that executes after `on_initialize` but
before inherents.
- `PostInherents` a callback that executes after all inherents ran
(including MBMs and `poll`).
- `PostTransactions` in symmetry to `PreInherents`, this one is called
before `on_finalize` but after all transactions.
A sane default is to set all of these to `()`. Example diff suitable for
any chain:
```patch
@@ impl frame_system::Config for Test {
type MaxConsumers = ConstU32<16>;
+ type SingleBlockMigrations = ();
+ type MultiBlockMigrator = ();
+ type PreInherents = ();
+ type PostInherents = ();
+ type PostTransactions = ();
}
```
An overview of how the block execution now looks like is here. The same
graph is also in the rust doc.
<details><summary>Block Execution Flow</summary>
<p>
</p>
</details>
## Inherent Order
Moved to https://github.com/paritytech/polkadot-sdk/pull/2154
---------------
## TODO
- [ ] Check that `try-runtime` still works
- [ ] Ensure backwards compatibility with old Runtime APIs
- [x] Consume weight correctly
- [x] Cleanup
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Co-authored-by: Liam Aharon <liam.aharon@hotmail.com>
Co-authored-by: Juan Girini <juangirini@gmail.com>
Co-authored-by: command-bot <>
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Co-authored-by: Gavin Wood <gavin@parity.io>
Co-authored-by: Bastian Köcher <git@kchr.de>
While adding runtime tests to
https://github.com/polkadot-fellows/runtimes/pull/130, I noticed the
Ethereum chain ID was hardcoded. For Kusama + Polkadot, the Ethereum
chain ID should 1 (Mainnet), whereas on Rococo it is 11155111 (Sepolia).
This PR also updates the Snowbridge crates versions to the current
versions on crates.io.
---------
Co-authored-by: claravanstaden <Cats 4 life!>
When running `cargo test -p bridge-hub-rococo-runtime --features
runtime-benchmarks`, two of the Snowbridge benchmark tests fails. The
reason is that when the runtime-benchmarks feature is enabled, the
`NoopMessageProcessor` message processor is used. The Snowbridge tests
rely on the outbound messages to be processed using the message queue,
so that we can check the expected nonce and block digest logs.
This PR changes the conditional compilation to only use
`NoopMessageProcessor` when compiling the executable to run benchmarks
against, not when running tests.
---------
Co-authored-by: claravanstaden <Cats 4 life!>
## Problem
During the bumping of the `polkadot-fellows` repository to
`polkadot-sdk@1.6.0`, I encountered a situation where the benchmarks
`teleport_assets` and `reserve_transfer_assets` in AssetHubKusama
started to fail. This issue arose due to a decreased ED balance for
AssetHubs introduced
[here](https://github.com/polkadot-fellows/runtimes/pull/158/files#diff-80668ff8e793b64f36a9a3ec512df5cbca4ad448c157a5d81abda1b15f35f1daR213),
and also because of a [missing CI
pipeline](https://github.com/polkadot-fellows/runtimes/issues/197) to
check the benchmarks, which went unnoticed.
These benchmarks expect the `caller` to have enough:
1. balance to transfer (BTT)
2. balance for paying delivery (BFPD).
So the initial balance was calculated as `ED * 100`, which seems
reasonable:
```
const ED_MULTIPLIER: u32 = 100;
let balance = existential_deposit.saturating_mul(ED_MULTIPLIER.into());`
```
The problem arises when the price for delivery is 100 times higher than
the existential deposit. In other words, when `ED * 100` does not cover
`BTT` + `BFPD`.
I check AHR/AHW/AHK/AHP and this problem has only AssetHubKusama
```
ED: 3333333
calculated price to parent delivery: 1031666634 (from xcm logs from the benchmark)
---
3333333 * 100 - BTT(3333333) - BFPD(1031666634) = −701666667
```
which results in the error;
```
2024-02-23 09:19:42 Unable to charge fee with error Module(ModuleError { index: 31, error: [17, 0, 0, 0], message: Some("FeesNotMet") })
Error: Input("Benchmark pallet_xcm::reserve_transfer_assets failed: FeesNotMet")
```
## Solution
The benchmarks `teleport_assets` and `reserve_transfer_assets` were
fixed by removing `ED * 100` and replacing it with `DeliveryHelper`
logic, which calculates the (almost real) price for delivery and sets it
along with the existential deposit as the initial balance for the
account used in the benchmark.
## TODO
- [ ] patch for 1.6 -
https://github.com/paritytech/polkadot-sdk/pull/3466
- [ ] patch for 1.7 -
https://github.com/paritytech/polkadot-sdk/pull/3465
- [ ] patch for 1.8 - TODO: PR
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
- Adds a test to check the correct digest for Snowbridge outbound
messages. For the correct digest to be in the block, the the
MessageQueue pallet should be configured after the EthereumOutbound
queue pallet. The added test fails if the EthereumOutbound is configured
after the MessageQueue pallet.
- Adds a helper method `run_to_block_with_finalize` to simulate the
block finalizing. The existing `run_to_block` method does not finalize
and so it cannot successfully test this condition.
Closes: https://github.com/paritytech/polkadot-sdk/issues/3208
---------
Co-authored-by: claravanstaden <Cats 4 life!>
Lifting some more dependencies to the workspace. Just using the
most-often updated ones for now.
It can be reproduced locally.
```sh
# First you can check if there would be semver incompatible bumps (looks good in this case):
$ zepter transpose dependency lift-to-workspace --ignore-errors syn quote thiserror "regex:^serde.*"
# Then apply the changes:
$ zepter transpose dependency lift-to-workspace --version-resolver=highest syn quote thiserror "regex:^serde.*" --fix
# And format the changes:
$ taplo format --config .config/taplo.toml
```
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
I found out during the cleanup of this deprecation message in the
`polkadot-fellows` repository that we deprecated `CurrencyAdapter`
without making the recommended changes.
## TODO
- [ ] fix `polkadot-fellows` bump to 1.6.0
https://github.com/polkadot-fellows/runtimes/pull/159
---------
Co-authored-by: Francisco Aguirre <franciscoaguirreperez@gmail.com>
Changes (partial https://github.com/paritytech/polkadot-sdk/issues/994):
- Set log to `0.4.20` everywhere
- Lift `log` to the workspace
Starting with a simpler one after seeing
https://github.com/paritytech/polkadot-sdk/pull/2065 from @jsdw.
This sets the `default-features` to `false` in the root and then
overwrites that in each create to its original value. This is necessary
since otherwise the `default` features are additive and its impossible
to disable them in the crate again once they are enabled in the
workspace.
I am using a tool to do this, so its mostly a test to see that it works
as expected.
---------
Signed-off-by: Oliver Tale-Yazdi <oliver.tale-yazdi@parity.io>
Related to https://github.com/paritytech/polkadot-sdk/issues/3242
Reorganizing the bridge zombienet tests in order to:
- separate the environment spawning from the actual tests
- offer better control over the tests and some possibility to
orchestrate them as opposed to running everything from the zndsl file
Only rewrote the asset transfer test using this new "framework". The old
logic and old tests weren't functionally modified or deleted. The plan
is to get feedback on this approach first and if this is agreed upon,
migrate the other 2 tests later in separate PRs and also do other
improvements later.
Removes the `bridges/snowbridge/parachain` directory and moves
everything up to under `snowbridge` directly. We are cleaning up our
local dev env after merging our crates into the polkadot-sdk.
---------
Co-authored-by: claravanstaden <Cats 4 life!>
## TODO
- [x] change constants when CI fails (should fail :) )
## Result
On the AssetHubRococo: 1701175800126 -> 1700929825257 = 0.15 %
decreased.
```
# Before ( [xcm] Fix `SovereignPaidRemoteExporter` and `DepositAsset` handling (#3157))
Feb 02 12:59:05.520 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1701175800126 for runtime: statemine-1006000 (statemine-0.tx14.au1)
# After
Feb 02 13:02:40.647 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1700929825257 for runtime: statemine-1006000 (statemine-0.tx14.au1)
```
On the AssetHubWestend: 2116038876326 -> 1641718372993 = 22.4 %
decreased.
```
# Before ( [xcm] Fix `SovereignPaidRemoteExporter` and `DepositAsset` handling (#3157))
Feb 02 12:56:00.880 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 2116038876326 for runtime: westmint-1006000 (westmint-0.tx14.au1)
# After
Feb 02 13:04:42.515 ERROR bridges::estimate: `bridging::XcmBridgeHubRouterBaseFee` actual value: 1641718372993 for runtime: westmint-1006000 (westmint-0.tx14.au1)
```
This PR addresses two issues:
- It modifies `DepositAsset`'s asset filter from `All` to
`AllCounted(1)` to prevent potentially charging excessive weight/fees.
This adjustment avoids situations where fees could be calculated based
on the count of assets, as illustrated
[here](https://github.com/paritytech/polkadot-sdk/blob/master/cumulus/parachains/runtimes/bridge-hubs/bridge-hub-rococo/src/weights/xcm/mod.rs#L38-L46).
- It encapsulates `DepositAsset` with `SetAppendix` to ensure that
`fees` are not trapped in any case. For instance, this prevents issues
when `ExportXcm::validate` encounters an error during the processing of
`ExportMessage`.
I started this investigation/issue based on @liamaharon question
[here](https://github.com/paritytech/polkadot-sdk/pull/1801#discussion_r1410452499).
## Problem
The `pallet_balances` integrity test should correctly detect that the
runtime has correct distinct `HoldReasons` variant count. I assume the
same situation exists for RuntimeFreezeReason.
It is not a critical problem, if we set `MaxHolds` with a sufficiently
large value, everything should be ok. However, in this case, the
integrity_test check becomes less useful.
**Situation for "any" runtime:**
- `HoldReason` enums from different pallets:
```rust
/// from pallet_nis
#[pallet::composite_enum]
pub enum HoldReason {
NftReceipt,
}
/// from pallet_preimage
#[pallet::composite_enum]
pub enum HoldReason {
Preimage,
}
// from pallet_state-trie-migration
#[pallet::composite_enum]
pub enum HoldReason {
SlashForContinueMigrate,
SlashForMigrateCustomTop,
SlashForMigrateCustomChild,
}
```
- generated `RuntimeHoldReason` enum looks like:
```rust
pub enum RuntimeHoldReason {
#[codec(index = 32u8)]
Preimage(pallet_preimage::HoldReason),
#[codec(index = 38u8)]
Nis(pallet_nis::HoldReason),
#[codec(index = 42u8)]
StateTrieMigration(pallet_state_trie_migration::HoldReason),
}
```
- composite enum `RuntimeHoldReason` variant count is detected as `3`
- we set `type MaxHolds = ConstU32<3>`
- `pallet_balances::integrity_test` is ok with `3`(at least 3)
However, the real problem can occur in a live runtime where some
functionality might stop working. This is due to a total of 5 distinct
hold reasons (for pallets with multi-instance support, it is even more),
and not all of them can be used because of an incorrect `MaxHolds`,
which is deemed acceptable according to the `integrity_test`:
```
// pseudo-code - if we try to call all of these:
T::Currency::hold(&pallet_nis::HoldReason::NftReceipt.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_preimage::HoldReason::Preimage.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForContinueMigrate.into(),
&nft_owner, deposit)?;
// With `type MaxHolds = ConstU32<3>` these two will fail
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomTop.into(),
&nft_owner, deposit)?;
T::Currency::hold(&pallet_state_trie_migration::HoldReason::SlashForMigrateCustomChild.into(),
&nft_owner, deposit)?;
```
## Solutions
A macro `#[pallet::*]` expansion is extended of `VariantCount`
implementation for the `#[pallet::composite_enum]` enum type. This
expansion generates the `VariantCount` implementation for pallets'
`HoldReason`, `FreezeReason`, `LockId`, and `SlashReason`. Enum variants
must be plain enum values without fields to ensure a deterministic
count.
The composite runtime enum, `RuntimeHoldReason` and
`RuntimeFreezeReason`, now sets `VariantCount::VARIANT_COUNT` as the sum
of pallets' enum `VariantCount::VARIANT_COUNT`:
```rust
#[frame_support::pallet(dev_mode)]
mod module_single_instance {
#[pallet::composite_enum]
pub enum HoldReason {
ModuleSingleInstanceReason1,
ModuleSingleInstanceReason2,
}
...
}
#[frame_support::pallet(dev_mode)]
mod module_multi_instance {
#[pallet::composite_enum]
pub enum HoldReason<I: 'static = ()> {
ModuleMultiInstanceReason1,
ModuleMultiInstanceReason2,
ModuleMultiInstanceReason3,
}
...
}
impl self::sp_api_hidden_includes_construct_runtime::hidden_include::traits::VariantCount
for RuntimeHoldReason
{
const VARIANT_COUNT: u32 = 0
+ module_single_instance::HoldReason::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance1>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance2>::VARIANT_COUNT
+ module_multi_instance::HoldReason::<module_multi_instance::Instance3>::VARIANT_COUNT;
}
```
In addition, `MaxHolds` is removed (as suggested
[here](https://github.com/paritytech/polkadot-sdk/pull/2657#discussion_r1443324573))
from `pallet_balances`, and its `Holds` are now bounded to
`RuntimeHoldReason::VARIANT_COUNT`. Therefore, there is no need to let
the runtime specify `MaxHolds`.
## For reviewers
Relevant changes can be found here:
- `substrate/frame/support/procedural/src/lib.rs`
- `substrate/frame/support/procedural/src/pallet/parse/composite.rs`
- `substrate/frame/support/procedural/src/pallet/expand/composite.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/composite_helper.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/hold_reason.rs`
-
`substrate/frame/support/procedural/src/construct_runtime/expand/freeze_reason.rs`
- `substrate/frame/support/src/traits/misc.rs`
And the rest of the files is just about removed `MaxHolds` from
`pallet_balances`
## Next steps
Do the same for `MaxFreezes`
https://github.com/paritytech/polkadot-sdk/issues/2997.
---------
Co-authored-by: command-bot <>
Co-authored-by: Bastian Köcher <git@kchr.de>
Co-authored-by: Dónal Murray <donal.murray@parity.io>
Co-authored-by: gupnik <nikhilgupta.iitk@gmail.com>
The `parachains-common` contains a lots of constants and type
definitions which are used for `polkadot-sdk`'s testnet runtimes and
also for `polkadot-fellows`'s production [SP
runtimes](https://github.com/polkadot-fellows/runtimes/tree/main/system-parachains/constants).
This PR cleans `parachains-common` module to contain only common and
generic functionality.
Testnet-specific constants have been moved to the separate module
dedicated just for testnets:
`polkadot-sdk/cumulus/parachains/runtimes/constants/`
Part of: https://github.com/paritytech/polkadot-sdk/issues/3054
---------
Co-authored-by: georgepisaltu <george.pisaltu@parity.io>
Reverts paritytech/polkadot-sdk#2302. 🤦♂️ should have checked the
migration CI first.
We either need to reduce the `max_message_size` for the open HRMP
channels on the failing chains or increase the `PageSize` of the XCMP
queue.
Both would be fine on a test-net, but i assume this will also fail
before the next SP runtime upgrade so first need to think what best to
do.
AFAIK its not possible currently to change the `max_message_size` of an
open HRMP channel.
- Prepares for the Deneb hardfork on Sepolia testnet on 31 January
(needs to be deployed to Rococo before then)
- Removes `beacon-minimal-spec` flag for simpler config
- Adds test comments
---------
Co-authored-by: Ron <yrong1997@gmail.com>
Co-authored-by: claravanstaden <Cats 4 life!>
Co-authored-by: Alistair Singh <alistair.singh7@gmail.com>
Svyatoslav Nikolsky